695-21-700 Spec and Drawing Narrative 7-10-26.pdf

AMENDMENT NUMBER 4 TO THE BID DOCUMENTS

Project Name: Milwaukee VAMC EHRM Infrastructure Upgrades (Project #695-21-700)

Revision: Delta 4 - Amendment 4 dated10 July 2026

Date: July 10, 2026

A. This Amendment forms part of the solicitation documents for the above-referenced project and shall be incorporated into the solicitation as if issued with the original documents. Except as expressly modified herein, all other terms, conditions, drawings, specifications, provisions, clauses, and requirements remain unchanged and in full force and effect.

B. Where this Amendment conflicts with the original solicitation documents, this Amendment shall govern unless otherwise directed in writing by the Contracting Officer.

C. Bidders/Offerors shall acknowledge receipt of this Amendment in the manner required by the solicitation.

D. Bidders/Offerors shall review this Amendment in its entirety and make all necessary adjustments to their bid/proposal. Submission of a bid/proposal shall constitute acknowledgment that the bidder/offeror has considered the modifications, clarifications, and supplemental information contained herein.

E. Oral statements, informal communications, meeting discussions, or interpretations shall not modify the solicitation unless incorporated by written Amendment issued by the Government.

BIDDERS MUST SIGN THE AMENDMENT AND SUBMIT IT WITH THEIR BIDS.

Except as described below, the original bid document remains unchanged. The bid documents are modified and/or clarified, as follows:

DRAWINGS

Civil:

1. Sheet 100-CS101:

• Revised Plan notes and legend

2. Sheet 100-CS102:

• Revised Plan notes and legend

3. Sheet 100-CS103:

• Revised Plan notes and legend

4. Sheet 100-CS104:

• Revised Plan notes and legend

5. Sheet 100-CS112:

• Update secondary connection point south of N Washington Dr and Hines Blvd.

6. Sheet 100-CU105:

• Change route of main fiber backbone. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

7. Sheet 100-CU106:

• Change route of main fiber backbone. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

8. Sheet 100-CU107:

• Change route of Bldg 107 fiber service. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

9. Sheet 100-CU109:

• Change handholes to manholes.

10. Sheet 100-CU110:

• Change handholes to manholes. Shorten fiber run behind Bldg 148. See technology plans for Bldg 146, 147, and 148 entry points.

11. Sheet 100-CU111:

• Change route of Bldg 109 fiber service. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

12. Sheet 100-CU112:

• Change handholes to manholes.

13. Sheet 100-CU113:

• Change building. Show route of Bldg 43 fiber service. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

14. Sheet 100-CU114:

• Extend route west to Bldg 123 wing D and to new manhole east of existing steam tunnel.

Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

15. Sheet 100-CU116:

• Change handholes to manholes.

16. Sheet 100-C117:

• Change handholes to manholes.

17. Sheet 100-CU132:

• Add new secondary route for Bldg 3 and Bldg 4. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

18. Sheet 100-CU133:

• Change route of main fiber backbone. Demo, pavement, erosion control, and manhole drainage measures to be updated in contractor estimate as well.

19. Sheet 100-CK100:

• Update detail 2 to reflect general style of curb.

Architecture:

20. Sheet GI101:

• Update Sheet Index to include sheets revised, and/or added (see below).

21. Sheets GI104:

• Delete section of the MKE EHRM General Notes.

• Revise and edit Technology, Architectural, Electrical and Phase II notes.

• Relocate and Update EHRM project scope table. Refer to new sheet GI104A.

22. Sheets GI104A:

• Include new sheet and provided for reference only.

• Include Asbestos Containing Material (ACM) information and EHRM Project Scope clarifications.

23. Sheets GI106 through GI110:

• Delete Sheets from the drawings,

• Refer to specification section 01 35 26 and its appendices for the management of the infection control requirements.

24. Sheet 07-GC101:

• Update Room Name(s).

25. Sheet 43-GC101:

• Revise location and addition of fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Update to fire rating partition type and location.

26. Sheet 70-GC101:

• Update to fire rating partition type and location.

27. Sheet 109-GC101:

• Revise Room Name(s).

28. Sheet 111-GC100:

• Update to fire rating partition type and location.

29. Sheet 111-GC101:

• Update to fire rating partition type and location.

30. Sheet 111-GC102:

• Update to fire rating partition type and location.

• Update Room Name(s).

31. Sheet 111-GC103:

• Update to fire rating partition type and location.

32. Sheet 111-GC105:

• Update to fire rating partition type and location.

33. Sheet 111-GC106:

• Update to fire rating partition type and location.

34. Sheet 111-GC107:

• Update to fire rating partition type and location.

35. Sheet 111-GC108:

• Update to fire rating partition type and location.

• Update Room Name(s).

36. Sheet 111-GC109:

• Update to fire rating partition type and location.

• Update Room Name(s).

37. Sheet 111-GC110:

• Update to fire rating partition type and location.

• Update Room Name(s).

38. Sheet 123-GC101:

• Update to fire rating partition type and location.

• Update Room Name(s).

39. Sheet 144-GC100:

• Update to fire rating partition type and location.

40. Sheet 144-GC101:

• Update to fire rating partition type and location.

• Update Room Name(s).

41. Sheet 03-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

42. Sheet 04-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

43. Sheet 04-AE102:

• Add demolition keynote #11 and General Notes #14

44. Sheet 05-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

45. Sheet 05-AE102:

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

46. Sheet 06-AD103:

• Update Room Name(s) and note.

47. Sheet 06-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

48. Sheet 06-AE102:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

49. Sheet 06-AE102:

• Add General Notes #14

• Update Room Name(s).

50. Sheet 06-AE104:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

51. Sheet 06-AE105:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

52. Sheet 07-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

53. Sheet 20-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

54. Sheet 43-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

55. Sheet 43-AE102:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

56. Sheet 43-AE103:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

57. Sheet 43-AE104:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

58. Sheet 70-AD101:

• Update Room Name(s).

59. Sheet 70-AD102:

• Update Room Name(s).

60. Sheet 70-AD103:

61. Sheet 70-AE101 through 70-AE103:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

62. Sheet 70-AE104:

• Add demolition keynote #11 and General Notes #14

63. Sheet 97-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

64. Sheet 102-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

65. Sheet 102-AE102:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

66. Sheet 102-AE103:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

67. Sheet 107-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

68. Sheet 108-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

69. Sheet 108-AE102:

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

70. Sheet 109-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

71. Sheet 111-AD104:

• Update made to demolition keynotes

• Update made to demolition floor plan and RCP.

72. Sheet 111-AE101:

73. Sheet 111-AE102:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

74. Sheet 111-AE103:

• Update to renovation floor plan #2

• Update to Floor Plan Keynotes

75. Sheet 111-AE104:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

76. Sheet 111-AE105:

• Update to renovation RCP #3

• Update to RCP Keynotes

77. Sheets 111-AE106 through 111-AE115:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

78. Sheet 112-AE101:

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

79. Sheet 113-AE101:

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

80. Sheet 123-AD101:

• Update demolition floor plan and RCP

81. Sheet 123-AD102:

• Update demolition floor plan and RCP

82. Sheet 123-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

83. Sheet 123-AE102:

• Add General Notes #14

• Update Room Name(s).

84. Sheet 144-AE101 and Sheet 144-AE102:

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

85. Sheet 146-AE101:

86. Sheet 147-AE101:

• Add General Notes #14

• Update Room Name(s).

87. Sheet 148-AE101:

• Add Fire extinguisher (OFCI) and fire extinguisher cabinets (CFCI)

• Add demolition keynote #11 and General Notes #14

• Update Room Name(s).

88. Sheet AE500:

• Added new wall type P04

• Revised wall type R07, and P01.

• Added wall type P02A to wall type P02.

89. Sheets GC103, GC105, 03-AE101, 04-AE101, 05-AE101, 05-AE102, 06-AE101, 06-AE102, 06- AE101, 06-AE102, 06-AE104, 05-AE105, 07-AE101, 20-AE101, 43-AE101 through 43-AE104, 70- AE101 through 70-AE104, 97-AE101, 102-AE101 through 102-AE-103, 107-AE101, 108-AE101, 109-AE101, 111-AE101 through 111-AE115, 112-AE101, 113-AE101, 123-AE101, 144-AE101, 144-

AE102, 146-AE101 AND 148-AE101:

• Replace Reference to R03 with P02

Technology:

90. Sheet 03-TN101:

• Re-configure 2D 2V outlet to 2D in Librarian’s work area.

91. Sheet 06-TN101:

• Revised Telecom room number.

92. Sheet 06-TN101A:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

93. Sheet 06-TN101D:

• Revised outlet configuration to 2D From 2D 1V.

94. Sheet 06-TN102C:

• Revised outlet configuration to 2D From 2D 2V.

95. Sheet 06-TN103:

• Revised Telecom room number.

96. Sheet 06-TN103C:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

97. Sheet 07-TN103:

• Revised Sheet notes.

98. Sheet 43-TN101:

• Revised Sheet note 9.

99. Sheet 43-TN102:

• Revised Sheet note 10.

100. Sheet 43-TN103:

• Revised Sheet note 9.

101. Sheet 70-TN100:

• Revised Sheet note 4. Revised conduit path for fiber leg.

102. Sheet 70-TN100C-N:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

103. Sheet 70-TN101:

• Revised Sheet note 4.

104. Sheet 70-TN102:

• Revised Sheet note 4 and Keynote 1.

105. Sheet 70-TN103:

• Revised Sheet note 9.

106. Sheet 102-TN101:

• Revised outlet configuration to 2D From 2D 2V.

107. Sheet 108-TN101:

• Revised keynote symbol reference to 1 From 2.

108. Sheet 109-TN100:

• Revised outlet configuration to 2D From 2D 2V.

109. Sheet 111-TD1100:

• Revised closet name to Existing Demarcation from Existing Data closet and Demarcation.

110. Sheet 111-TD1101K:

• Added outlets to this sheet.

111. Sheet 111-TD1107H:

• Revised outlets to exist from demolition.

112. Sheet 111-TD1107J:

• Added 1D outlet to this sheet.

113. Sheet 111-TN1009:

• Revised conduit paths in sub-basement for campus fiber.

114. Sheet 111-TN1100:

• Added outlets to this sheet.

115. Sheet 111-TN1100A:

• Added outlets to this sheet.

116. Sheet 111-TN1100H:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

117. Sheet 111-TN1100I:

118. Sheet 111-TN1100K:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

119. Sheet 111-TN1100L:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

120. Sheet 111-TN1101:

• Added Sheet note.

121. Sheet 111-TN1101E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

122. Sheet 111-TN1101F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

123. Sheet 111-TN1101G:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

124. Sheet 111-TN1101J:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

125. Sheet 111-TN1101K:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

126. Sheet 111-TN1101L:

• Revised outlet configuration to 2D From 2D 2V.

127. Sheet 111-TN1102:

• Added Sheet note.

128. Sheet 111-TN1102D:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

129. Sheet 111-TN1102E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

130. Sheet 111-TN1102F:

• Revised outlet configuration to 1D From 1V.

131. Sheet 111-TN1102H:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

132. Sheet 111-TN1102I:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

133. Sheet 111-TN1102J:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

134. Sheet 111-TN1102K:

135. Sheet 111-TN1102L:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

136. Sheet 111-TN1103:

• Added Sheet note.

137. Sheet 111-TN1103D;

• Revised outlets, remove voice configuration from data-voice outlet configuration.

138. Sheet 111-TN1103E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

139. Sheet 111-TN1103K:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

140. Sheet 111-TN1104:

• Added Sheet note.

141. Sheet 111-TN1104A:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

142. Sheet 111-TN1104B:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

143. Sheet 111-TN1104D:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

144. Sheet 111-TN1104E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

145. Sheet 111-TN1104F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

146. Sheet 111-TN1104H:

• Revised outlet configuration to 2D From 2D 2V.

147. Sheet 111-TN1104K:

• Revised (2) outlet configuration to 2D From 2D 2V.

148. Sheet 111-TN1104L:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

149. Sheet 111-TN1105:

• Added Sheet note.

150. Sheet 111-TN1105B:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

151. Sheet 111-TN1105D:

• Revised (2) outlet configuration to 2D From 2D 2V.

152. Sheet 111-TN1105E:

153. Sheet 111-TN1105F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

154. Sheet 111-TN1105H:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

155. Sheet 111-TN1105I:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

156. Sheet 111-TN1105J:

• Revised outlet configuration to 1D From 1V.

157. Sheet 111-TN1106:

• Added Sheet note.

158. Sheet 111-TN1106A:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

159. Sheet 111-TN1106B:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

160. Sheet 111-TN1106D:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

161. Sheet 111-TN1106E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

162. Sheet 111-TN1106F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

163. Sheet 111-TN1106H:

• Revised Telecom room number and 2D From 2D 2V.

164. Sheet 111-TN1106I:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

165. Sheet 111-TN1106J:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

166. Sheet 111-TN1106K:

• Added (2) 2D outlet and removed (1) 2D outlet From the location.

167. Sheet 111-TN1106L:

• Revised outlet configuration to 2D From 2D 2V.

168. Sheet 111-TN1107:

• Added Sheet note.

169. Sheet 111-TN1107A:

170. Sheet 111-TN1107B:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

171. Sheet 111-TN1107D:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

172. Sheet 111-TN1107E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

173. Sheet 111-TN1107F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

174. Sheet 111-TN1107H:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

175. Sheet 111-TN1107J:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

176. Sheet 111-TN1107K:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

177. Sheet 111-TN1107L:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

178. Sheet 111-TN1108:

• Added Sheet note.

179. Sheet 111-TN1108A:

• Revised outlet configuration to 1D From 1V.

180. Sheet 111-TN1108D:

• Revised outlet configuration to 1D From 1V.

181. Sheet 111-TN1108E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

182. Sheet 111-TN1108H:

• Revised (2) outlet configuration to 2D From 2D 2V.

183. Sheet 111-TN1109:

• Added Sheet note.

184. Sheet 111-TN1109A:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

185. Sheet 111-TN1109B:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

186. Sheet 111-TN1109D:

187. Sheet 111-TN1109E:

188. Sheet 111-TN1109F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

189. Sheet 111-TN1109J:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

190. Sheet 111-TN1109K:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

191. Sheet 111-TN1109L:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

192. Sheet 111-TN1110:

• Added Sheet note.

193. Sheet 111-TN1110D:

• Revised (2) outlet configuration to 2D From 2D 2V.

194. Sheet 111-TN1110E:

• Added (1) 2D outlet.

195. Sheet 111-TN1110F:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

196. Sheet 111-TN1110J:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

197. Sheet 111-TN1110K:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

198. Sheet 123-TN101:

• Added Sheet note.

199. Sheet 123-TN101D:

• Revised outlet configuration to 1D From W.

200. Sheet 123-TN101E:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

201. Sheet 144-TN100:

• Revised Sheet notes.

202. Sheet 144-TN101:

• Revised Sheet notes.

203. Sheet 146-TN101:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

204. Sheet 147-TN101:

205. Sheet 148-TN101:

• Revised outlets, remove voice configuration from data-voice outlet configuration.

206. Sheet T1001:

• Revised Telecom Room reference

207. Sheet T1003:

• Revised Sheet notes, Keynotes and keynote symbol reference numbers. Clarification of Backbone Path.

208. Sheet TN300:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

• Revise cabinet size and Abbreviation in Room enlargement.

209. Sheet TN301:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

210. Sheet TN302:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

211. Sheet TN303:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

212. Sheet TN304:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway. Revised Telecom room number.

213. Sheet TN305:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

214. Sheet TN306:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

215. Sheet TN307:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

216. Sheet TN308:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

217. Sheet TN309:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

218. Sheet TN310:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

219. Sheet TN311:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

220. Sheet TN312:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

221. Sheet TN313:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

222. Sheet TN314:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

223. Sheet TN315:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

224. Sheet TN316:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

225. Sheet TN317:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

226. Sheet TN318:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

227. Sheet TN319:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

228. Sheet TN320:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

229. Sheet TN321:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

230. Sheet TN322:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

231. Sheet TN323:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

232. Sheet TN324:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

233. Sheet TN325:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

234. Sheet TN326:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

235. Sheet TN327:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

236. Sheet TN328:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

237. Sheet TN329:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

238. Sheet TN330:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

239. Sheet TN331:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

240. Sheet TN400:

• Add Above ceiling information outlet mounting detail.

241. Sheet TN401:

• Add Rack mount bonding bus bar detail.

242. Sheet TN500:

• Added keynote symbol 3 and keynote 3 to rack elevation and Revised layout for Pathway and note for pathway.

243. Sheet TN501:

• Revised riser diagrams and keynotes.

244. Sheet TN502:

• Revised riser diagrams and keynotes.

245. Sheet TN503:

• Revised riser diagrams and keynotes.

246. Sheet TN504:

• Revised riser diagrams and keynotes.

247. Sheet TN505:

• Revised riser diagrams and keynotes.

248. Sheet TN506:

• Revised riser diagrams and keynotes.

249. Sheet TN507:

• Revised riser diagrams and keynotes.

250. Sheet TN508:

• Revised keynote 5.

251. Sheet TN509:

• Removed riser diagram.

252. Sheet TN600:

• Revised schedules.

253. Sheet M-002:

• Removed manufacturer from Split System Air Conditioner / Evaporator Schedule.

254. Sheet 111-PD102:

• Added hatching and keynote #2.

255. Sheet 111-MD102:

• Added hatching and keynote #10.

256. Sheet 111-ED102:

• Added hatching and keynote #13.

Specifications:

Changes to the specification sections have been highlighted in yellow

257. Section 00 01 10 Table of Contents

• Added section 01 35 26B

• Added section 02 82 00

• Deleted section 02 82 13.13

• Deleted section 02 82 13.19

• Deleted section 02 82 13.31

• Deleted section Hazardous Building Materials – Asbestos Plan

• Added section 10 44 13

258. Section 01 00 00:

• Updated Specification sections

259. Section 01 00 00A:

• Updated specification sections

260. Section 01 35 26:

• Updated specification section.

261. Section 01 35 26B:

• Upated new specification section.

262. Section 02 82 00:

• Added new specification section.

263. Section 02 83 33.13:

• Updated new specification section.

264. Section 08 11 13:

• Updated specification section.

265. Section 08 71 00:

• Updated specification section.

266. Section 10 44 13:

• Added new specification section.

BIDDER MUST ACKNOWLEDGE THIS AMENDMENT BY SIGNING BELOW AND ATTACHING

THE SIGNED AMENDMENT TO THE BID FORM:

Company Name ______________________________________

Responsible Person _______________________________________

Signature ____________________________________________

Date _________________________________________________

VHAMIWBeierJ Text Box 01 91 00 update to table pg 23

VHAMIWBeierJ Arrow

VHAMIWBeierJ Text Box Also in Amend #4