34-Sec 01 35 16 Alteration Project Procedures.pdf

PDF 109 KB Posted

Attached to
82 W. Indian Lane - FEMA Demolition
Solicitation number
US.230082
Issued by
Montgomery County, Pennsylvania

About this file

This is a technical specification document for alteration project procedures, Section 01 35 16, applicable to the FEMA-funded demolition project at 82 West Indian Lane in West Norriton Township, Montgomery County, Pennsylvania. The specification establishes standard procedures for patching, extending work, and managing transitions during alteration and renovation activities. The document outlines requirements for examining existing conditions, preparing work areas, installing new materials, and managing transitions between new and existing work. Key procedural requirements include verifying demolition completion before beginning restoration work, removing unsuitable materials such as rotted wood and corroded metals, coordinating alteration work to expedite completion, minimizing damage during cutting and patching operations, and restoring exposed mechanical and electrical work. The specification mandates that new materials match existing products in type and quality, determined through inspection and testing where necessary, and requires smooth transitions between new and existing work with patches matching existing textures and appearances.

The specification establishes quality standards for surface repairs and finishes, requiring that damaged, lifted, discolored, or imperfect portions of existing surfaces be patched or replaced with substrate repairs completed prior to finish patching. All finished surfaces must achieve uniform finish and texture, with entire surfaces refinished to the nearest intersections when matches cannot be achieved. The document references related sections covering coordination and meetings, construction facilities and temporary controls, and demolition procedures, and requires contractors to request engineer instruction when changes of plane equal or exceed one-quarter inch. Cleaning of owner-occupied areas is mandated in addition to standard construction cleaning requirements. This specification applies to the demolition and site restoration work for the single-family home removal at 82 West Indian Lane, which includes erosion control, grading, soil compaction, and replacement with grass surfaces.

View the file

Other files

File Type Posted
8-Doc 00 21 13 Instructions to Bidders.pdf PDF
14-Doc 00 61 13.16 Payment Bond.pdf PDF
1-00 82 W. Indian Lane FEMA Plans.pdf PDF
39-Sec 01 33 00 Submittals.pdf PDF
35-Sec 01 42 13 Organization and Reference Acronyms.pdf PDF
33-Sec 01 32 16 Construction Project Schedule.pdf PDF
42-Sec 01 70 00 Contract Closeout.pdf PDF
29-Doc 00 73 00 04 Appendix D - Hazard Mitigation Grant Conditions.pdf PDF
41-Sec 01 55 26 Traffic Regulation.pdf PDF
12-Doc 00 45 10 Bidders Acknowledgement Form.pdf PDF
9-Doc 00 45 13 Bidder Qualification Statement.pdf PDF
10-Doc 00 45 53 Agreement of Surety Company.pdf PDF
18-Doc 00 62 16 Certificate of Insurance.pdf PDF
27-Sec 01 11 13 Summary of Work.pdf PDF
7-Doc 00 21 13.1 Instructions for Electronic Bidding.pdf PDF
2-Doc 00 01 15 List of Drawing Sheets.pdf PDF
21-Doc 00 73 00 Supplementary Conditions.pdf PDF
28-Doc 00 73 00 01 Appendix A - Prevailing Wage Rates.pdf PDF
32-Sec 01 31 00 Coordination and Meetings.pdf PDF
31-Sec 01 29 00 Contract Considerations.pdf PDF
24-Doc 00 91 13 Addenda.pdf PDF
17-Doc 00 65 19.13 Contractors Affidavit.pdf PDF
15-Doc 00 61 19 Maintenance Bond.pdf PDF
49-Sec 32 92 00 Finish Grading, Seeding and Sodding.pdf PDF
26-Doc 00 73 00 - Supplementary Conditions.pdf PDF
50-Sec 31 23 33 Excavation, Backfill and Compaction.pdf PDF
4-Doc 00 01 10 Table of Contents.pdf PDF
13-Doc 00 52 00 Agreement.pdf PDF
16-Doc 00 61 13.13 Performance Bond.pdf PDF
45-Sec 02 41 16 Demolition.pdf PDF
40-Sec 01 56 39 Landscape Protection.pdf PDF
22-Doc 00 72 00 General Conditions.pdf PDF
19-Doc 00 65 19.19 Consent of Surety.pdf PDF
5-Doc 00 43 13 Bid Bond.pdf PDF
6-Doc 00 11 13 Advertisement for Bids.pdf PDF
25-Sec 01 00 00 Basic Requirements.pdf PDF
37-Sec 01 50 00 Construction Facilities and Temporary Controls.pdf PDF
23-Doc 00 73 00 02 Appendix B - Public Works Employment Verification Form.pdf PDF
46-Sec 31 11 00 Clearing and Grubbing.pdf PDF
48-Sec 01 57 13 Soil Erosion and Sediment Control.pdf PDF
44-Sec 01 60 00 Material and Equipment.pdf PDF
20-Doc 00 65 19.16 Contractors Release of Liens.pdf PDF
3-Doc 00 01 01 Project Title Page.pdf PDF
38-Sec 01 40 00 Quality Control.pdf PDF
43-Sec 01 57 14 Erosion Control Blanket.pdf PDF
36-Sec 01 22 00 Measurement and Payment.pdf PDF
11-Doc 00 45 19 Non-Collusion Affidavit.pdf PDF
47-Sec 31 20 00 Earthwork.pdf PDF
30-Doc 00 73 00 03 Appendix C - Chapter 106 Permit.pdf PDF
Show all 49

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

ALTERATION PROJECT PROCEDURES

01 35 16-1

SECTION 01 35 16

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Products and installation for patching and extending Work.

B. Transition and adjustments.

C. Repair of damaged surfaces, finishes, and cleaning.

1.02 RELATED SECTIONS

A. Section 01 31 00: Coordination and Meetings: Cutting and Patching.

B. Section 01 50 00: Construction Facilities and Temporary Controls: Protection of Installed Work, and Progress Cleaning and Waste Removal.

C. Section 02 41 16: Demolition.

PART 2 PRODUCTS

2.01 PRODUCTS FOR PATCHING AND EXTENDING WORK

A. New Materials: As specified in product sections; match existing products and work for patching and extending work.

B. Type and Quality of Existing Products: Determine by inspecting and testing products where necessary, referring to existing work as a standard.

PART 3 EXECUTION

3.01 EXAMINATION

A. Verify that demolition is complete and areas are ready for installation of new Work.

B. Beginning of restoration Work means acceptance of existing conditions.

3.02 PREPARATION

A. Cut, move, or remove items as necessary for access to alterations and renovation Work.

Replace and restore at completion.

B. Remove unsuitable material not marked for salvage, such as rotted wood, corroded metals, and deteriorated masonry and concrete. Replace materials as specified for finished Work.

C. Remove debris and abandoned items from area and from concealed spaces.

D. Prepare surface to provide for proper installation of new Work.

3.03 INSTALLATION

A. Coordinate Work of alterations and renovations to expedite completion.

01 35 16-2

B. Remove, cut, and patch Work in a manner to minimize damage and to provide a means of restoring Products and finishes to specified condition in accordance with Section 01 31 00.

C. Re-cover and refinish Work that exposes mechanical and electrical work exposed accidentally during the Work.

D. Install Products as specified in individual sections.

3.04 TRANSITIONS

A. Where new Work abuts or aligns with existing, perform a smooth and even transition. Patch Work to match existing adjacent work in texture and appearance.

B. When finished surface are cut so that a smooth transition with new Work is not possible, terminate existing surface along a straight line at a natural line of division and make recommendation to Engineer.

3.05 ADJUSTMENTS

A. Where a change of plane of 1/4 inch or more occurs, request instruction from Engineer.

3.06 REPAIR OF DAMAGED SURFACES

A. Patch or replace portions of existing surfaces which are damaged, lifted, discolored, or showing other imperfections.

B. Repair substrate prior to patching finish.

3.07 FINISHES

A. Finish surfaces as specified in individual Product sections.

B. Finish patches to produce uniform finish and texture over entire area. When finish cannot be matched, refinish entire surface to nearest intersections.

3.08 CLEANING

A. In addition to cleaning specified in Section 01 50 00, clean Owner-occupied areas of Work.

END OF SECTION

File details come from the government source that posted it. Updated .