W912QR22R0028_CUI_CF_CIDV2_FFE-0003.pdf

Controlled by: USACE-LRL-ED-MA CUI Category(ies):

LDC or Distribution Statement: N/A POC: Blake Gevedon Contracting Specialist william.b.gevedon@usace.army.mi 502.315.6791

Materials shall be submitted to potential offerors currently certified in the Joint Certification Program (JCP) only.

W912QR22R0028_CUI_CF_CIDV2_FFE-0003

A01

A02

A05 Magnuson Group Great Openings Peter Pepper Products

A06 Magnuson Group Great Openings Peter Pepper Products

A07

C01-C

C02-C

C03

C05

C08

C10

C11

C16

C22

C23

C25

C26

D02B

D03B

D04B

D05

D08

D09

D17

D17A

D17B

D17C

D17D

G06

G15

S01A

T01

T02

T03

T08

T18

T33

T35

T37

Geiger Herman Miller

Clock

Waste Receptacle

Recycling Receptacle

Haworth

Herman Miller

Herman Miller Knoll

Gunlocke

Lectern Haworth

Private Office Desk Typical (FOG) Gunlocke Geiger

Waste Bin

Task Chair

Magnuson Group Great Openings

Steelcase

Executive Open Office Typical Gunlocke Geiger Herman Miller

Amdt. #0003

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ACCESSORIES

FF&E MANUFACTURER MATRIX OF ALTERNATES

Rubbermaid Carlisle Sparco

CODE

Trash Bin 7 Gallon

ITEM DESCRIPTION

BASIS OF DESIGN ALTERNATE 1 ALTERNATE 2

MANUFACTURER

Knoll Allsteel

Desk, Benching Station, 24" x 48" Herman Miller Knoll Steelcase

Desk, Benching Station, 30" x 60" Herman Miller Knoll Steelcase

Executive Open Office Typical Gunlocke Geiger Herman Miller

Executive Open Office Typical

Open Office Typical 1 Haworth

Square Occasional Table 20" Nemschoff OFS Martin Brattrud

Herman Miller

SEATING

Office Task Chair (NOT USED)

Peter Pepper Products

Steelcase Herman Miller Humanscale

Global Industrial Peter Pepper Products Uline Industrial

OFS

Lounge Chair - Reception/Guest Herman Miller Knoll

Private Office Desk Typical (FOG) Gunlocke Geiger Herman Miller

Steelcase

Situation Rm Task Chair & Command Suite Side Chair Steelcase Herman Miller Knoll

Situation Room Side Chair Haworth Herman Miller Knoll

Lounge Chair - Command Suite Steelcase Herman Miller

Geiger

Nemschoff

Office Task Chair Steelcase Herman Miller Humanscale

Office Guest Chair Steelcase Geiger Knoll

Medium Conference Room Chair Haworth Knoll OFS

Large Conference Room Chair Geiger OFS

Large Conference Room Side Chair Herman Miller Steelcase

Knoll

Nursing Room Chair Steelcase Herman Miller

Private Office Desk Typical Gunlocke Geiger Herman Miller

Herman Miller

DESKS

Private Office Desk Typical (FOG) Gunlocke

Geiger Herman Miller

Steelcase OFS Davis Furniture

Round Occasional Table 18" Nemschoff OFS Martin Brattrud

Haworth

Boat-Shaped Conference Table (Laminate) 42/96"

Executive Open Office Typical Gunlocke

OFS

Round Meeting Table (Laminate) 36" Knoll

Executive Open Office Typical Gunlocke Geiger Herman Miller

Storage Case 36"/5H Herman Miller

Round Occasional Side Table 20/20"

STORAGE

SYSTEMS WORKSTATIONS

TABLES

Nucraft

Herman Miller Knoll

Wedge-Shaped Table (Laminate) 36/76/168" Nucraft Teknion Haworth

Haworth

Boat-Shape Conference Table (Laminate) 54/144" Steelcase Knoll Enwork

Boat-Shaped Conference Table (Laminate) 42/84"

Herman Miller Knoll

Amdt. #0003

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

FF&E MANUFACTURER MATRIX OF ALTERNATES

CODE ITEM DESCRIPTION

BASIS OF DESIGN ALTERNATE 1 ALTERNATE 2

MANUFACTURER

E01

E03

E04

AV3

Amdt. #0003

Refrigerator (FS) Maytag LG

Microwave Panasonic GE Profile Toshiba

Refrigerator (UC) Summit Appliance (ADA)

GE Profile

U-Line Corporation(ADA) AccuCold (ADA)

75" TV Screen Sony Panasonic LG

AUDIO VISUAL EQUIPMENT

EQUIPMENT

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D03B PRIVATE OFFICE TYPICAL (FOG)

Warranty 12 years, single shift; 7 years, single shift for height adjustable electrical components; 3 years for LED tasklights

Finishes VENEER FINISH:

Pinnacle Quarter Cut Walnut Veneer, QT679

TACKBOARD FABRIC:

Muse, Refresh SMHMMUS06

METAL FINISH:

Silver Metal, PR6

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 102"W x 108"D (Overall)

Description of

Salient Features

GENERAL:

Freestanding U-shape desk

(1) Single pedestal breakfront desk with modesty panel, 72"W x 36"D overall

(1) Wall mounted height adjustable bridge, 48"W x 24"D, height adjustment range 29.5" - 42.5"

(1) Straight credenza worksurface, 84"W x 24"D

(1) Box/box/file pedestal, 9" - 18"W, not to impeded available knee-space under front worksurface

(1) File/file pedestal, 30"W x 24"D

(1) Wardrobe, 18"W x 24"D, (1) adjustable shelf and (1) coat rod

(1) Overhead storage unit with hinged doors and (1) adjustable shelf, 84"W, LED tasklights mounted below

(1) Tackboard, 84"W

Provide wood veneer chassis with matching high-pressure laminate top on worksurfaces.

Provide integrated power unit with flush close doors in desk, credenza, and return/bridge.

Full extension drawers.

Unit to include power receptacles and USB.

Provide wire management and associated accessories.

Grommets to be provided at desk and return, all freestanding components to have leveling glides, storage components to have metal pulls.

All storage components to be locking and keyed alike per workstation/desk.

No two offices keyed alike.

Refer to Furniture Plans I100A-I112C for desk handedness

CONSTRUCTION:

Typical components to be solid wood, grommets and drawer pulls to be metal.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

Manufacturer Gunlocke

Product Name Silea (Wood Veneer)

Item Number TBD by manufacturer

Tackboard Fabric Metal FinishVeneer Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D03B PRIVATE OFFICE TYPICAL (FOG)

Sheet No. Qty. Sheet No. Qty.

I101C 1

I101C 1

SIN:

LOCATIONS

Room No. Room Name Room No. Room Name

2062 Office

2063 Office

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-28F-0021Y QUANTITY 2

GSA CONTRACT INFORMATION COST

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/31/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D04B PRIVATE OFFICE TYPICAL (FOG)

Warranty 12 years, single shift; 7 years, single shift for height adjustable electrical components; 3 years for LED tasklights

Finishes VENEER FINISH:

Pinnacle Quarter Cut Walnut Veneer, QT679

TACKBOARD FABRIC:

Muse, Refresh SMHMMUS06

METAL FINISH:

Silver Metal, PR6

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 108"W x 108"D (Overall)

Description of

Salient Features

GENERAL:

Freestanding U-shape desk

(1) Bow front single pedestal breakfront desk with modesty panel, 72"W x 36"D overall

(1) Wall mounted height adjustable bridge, 48"W x 24"D, height adjustment range 29.5" - 42.5"

(1) Straight credenza worksurface, 90"W x 24"D

(1) Box/box/file pedestal, 9" - 18"W, not to impeded available knee-space under front worksurface

(1) File/file pedestal, 30"W x 24"D

(1) Surface mount bookcase, 30"W, (3) adjustable shelves

(1) Wardrobe, 18"W x 24"D, (1) adjustable shelf and (1) coat rod

(1) Overhead storage unit with hinged doors and (1) adjustable shelf, 60"W, LED tasklights mounted below

(1) Tackboard, 60"W

Provide wood veneer chassis with matching high-pressure laminate top on worksurfaces.

Provide integrated power unit with flush close doors in desk, credenza, and return/bridge.

Full extension drawers.

Unit to include power receptacles and USB.

Provide wire management and associated accessories.

Grommets to be provided at desk and return, all freestanding components to have leveling glides, storage components to have metal pulls.

All storage components to be locking and keyed alike per workstation/desk.

No two offices keyed alike.

Refer to Furniture Plans I100A-I112C for desk handedness

CONSTRUCTION:

Typical components to be solid wood, grommets and drawer pulls to be metal.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

Manufacturer Gunlocke

Product Name Silea (Wood Veneer)

Item Number TBD by manufacturer

Tackboard Fabric Metal FinishVeneer Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D04B PRIVATE OFFICE TYPICAL (FOG)

Sheet No. Qty. Sheet No. Qty.

I101C 1

I102C 1

SIN:

LOCATIONS

Room No. Room Name Room No. Room Name

2066 Office

2077 Office

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-28F-0021Y QUANTITY 2

GSA CONTRACT INFORMATION COST

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/31/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17 EXECUTIVE OPEN OFFICE TYPICAL

Dimensions 120"W x 96"D (Overall)

Description of

Salient Features

GENERAL:

Freestanding U-shape desk

(1) Straight worksurface desk with and modesty panel, 72"W x 30"D overall

(1) Straight return worksurface, 42"W x 24"D

(1) Straight credenza worksurface, 120"W x 24"D

(1) Box/box/file pedestal, 9" - 18"W, not to impeded available knee-space under front worksurface

(2) File/file pedestal, 30"W x 24"D

Provide wood veneer chassis with matching high-pressure laminate top on worksurfaces.

Provide integrated power unit with flush close doors in desk, credenza, and return/bridge.

Unit to include power receptacles and USB.

Wire management tray to be open and easily accessible with ample room against underside of worksurface. Nylon/textile wire management tray/basket acceptable alternative.

Wire management from desk to building power must be provided below carpet or power in the floor.

Grommets to be provided at desk, bridge, and credenza, all freestanding components to have leveling glides, storage components to have metal pulls.

Soft-close feature for all doors and drawers.

All storage components to be locking and keyed alike per workstation/desk.

No two offices keyed alike.

Workstation Typical D17, D17A, D17B, D17C, and D17D must come from the same manufacturer.

Refer to Furniture Plans I100A-I112C for desk handedness.

CONSTRUCTION:

Solid wood construction, grommets and drawer pulls to be metal.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Warranty

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Manufacturer Gunlocke

Product Name Silea (Wood Veneer)

Item Number TBD by manufacturer

Finishes VENEER FINISH:

Pinnacle Quarter Cut Walnut Veneer, QT679

METAL FINISH:

Silver Metal, PR6

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

Veneer Finish Metal Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17 EXECUTIVE OPEN OFFICE TYPICAL

Sheet No. Qty. Sheet No. Qty.

I103C 2

SIN:

2093 Open Office

LOCATIONS

Room No. Room Name Room No. Room Name

GSA CONTRACT GS-28F-0021Y QUANTITY 2

EXPIRATION DATE 3/31/2024 FREIGHT $0.00

GSA CONTRACT INFORMATION COST

FSC GROUP 71 33721 UNIT COST $0.00

BPA TOTAL COST $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

SHIPPING TERMS

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17B EXECUTIVE OPEN OFFICE TYPICAL

Dimensions 84"W x 72"D (Overall)

Description of

Salient Features

GENERAL:

Freestanding L-shape desk

(1) Straight worksurface desk with and modesty panel, 84"W x 30"D overall

(1) Straight return worksurface, 42"W x 24"D

(1) Box/box/file pedestal, 9" - 18"W, not to impeded available knee-space under front worksurface

(1) File/file pedestal, 30"W x 24"D

Provide wood veneer chassis with matching high-pressure laminate top on worksurfaces.

Provide integrated power unit with flush close doors in desk, credenza, and return/bridge.

Unit to include power receptacles and USB.

Wire management tray to be open and easily accessible with ample room against underside of worksurface. Nylon/textile wire management tray/basket acceptable alternative.

Wire management from desk to building power must be provided below carpet or power in the floor.

Grommets to be provided at desk, bridge, and credenza, all freestanding components to have leveling glides, storage components to have metal pulls.

Soft-close feature for all doors and drawers.

All storage components to be locking and keyed alike per workstation/desk.

No two offices keyed alike.

Workstation Typical D17, D17A, D17B, D17C, and D17D must come from the same manufacturer.

Refer to Furniture Plans I100A-I112C for desk handedness.

CONSTRUCTION:

Solid wood construction, grommets and drawer pulls to be metal.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Warranty

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Manufacturer Gunlocke

Product Name Silea (Wood Veneer)

Item Number TBD by manufacturer

Finishes VENEER FINISH:

Pinnacle Quarter Cut Walnut Veneer, QT679

METAL FINISH:

Silver Metal, PR6

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

Veneer Finish Metal Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17B EXECUTIVE OPEN OFFICE TYPICAL

Sheet No. Qty. Sheet No. Qty.

I101C 6

SIN:

2058 Open Office

LOCATIONS

Room No. Room Name Room No. Room Name

GSA CONTRACT GS-28F-0021Y QUANTITY 6

EXPIRATION DATE 3/31/2024 FREIGHT $0.00

GSA CONTRACT INFORMATION COST

FSC GROUP 71 33721 UNIT COST $0.00

BPA TOTAL COST $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

SHIPPING TERMS

****************************************************************************************************************************Amdt. #0003

QTY.

Finishes VENEER FINISH:

Pinnacle Quarter Cut Walnut Veneer, QT679

METAL FINISH:

Silver Metal, PR6

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

Description of

Salient Features

GENERAL:

Freestanding L-shape desk

(1) Straight worksurface desk with and modesty panel, 72"W x 30"D overall

(1) Straight return worksurface, 42"W x 24"D

(1) Box/box/file pedestal, 9" - 18"W, not to impeded available knee-space under front worksurface

(1) File/file pedestal, 30"W x 24"D

Provide wood veneer chassis with matching high-pressure laminate top on worksurfaces.

Provide integrated power unit with flush close doors in desk, credenza, and return/bridge.

Unit to include power receptacles and USB.

Wire management tray to be open and easily accessible with ample room against underside of worksurface. Nylon/textile wire management tray/basket acceptable alternative.

Wire management from desk to building power must be provided below carpet or power in the floor.

Grommets to be provided at desk, bridge, and credenza, all freestanding components to have leveling glides, storage components to have metal pulls.

Soft-close feature for all doors and drawers.

All storage components to be locking and keyed alike per workstation/desk.

No two offices keyed alike.

Workstation Typical D17, D17A, D17B, D17C, and D17D must come from the same manufacturer.

Refer to Furniture Plans I100A-I112C for desk handedness.

CONSTRUCTION:

Solid wood construction, grommets and drawer pulls to be metal.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Warranty

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Manufacturer Gunlocke

Product Name Silea (Wood Veneer)

Item Number TBD by manufacturer

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17C EXECUTIVE OPEN OFFICE TYPICAL

Dimensions 72"W x 72"D (Overall)

Veneer Finish Metal Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17C EXECUTIVE OPEN OFFICE TYPICAL

Sheet No. Qty. Sheet No. Qty.

I103C 2

SIN:

BPA TOTAL COST $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

SHIPPING TERMS

GSA CONTRACT GS-28F-0021Y QUANTITY 2

EXPIRATION DATE 3/31/2024 FREIGHT $0.00

GSA CONTRACT INFORMATION COST

FSC GROUP 71 33721 UNIT COST $0.00

2093 Open Office

LOCATIONS

Room No. Room Name Room No. Room Name

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17D EXECUTIVE OPEN OFFICE TYPICAL

Dimensions 102"W x 96"D (Overall)

Description of

Salient Features

GENERAL:

Freestanding U-shape desk

(1) Straight worksurface desk with and modesty panel, 72"W x 30"D overall

(1) Straight return worksurface, 42"W x 24"D

(1) Straight credenza worksurface, 96"W x 24"D

(1) Box/box/file pedestal, 9" - 18"W, not to impeded available knee-space under front worksurface

(1) File/file pedestal, 30"W x 24"D

(3) Overhead storage cabinets

Provide wood veneer chassis with matching high-pressure laminate top on worksurfaces.

Provide integrated power unit with flush close doors in desk, credenza, and return/bridge.

Unit to include power receptacles and USB.

Wire management tray to be open and easily accessible with ample room against underside of worksurface. Nylon/textile wire management tray/basket acceptable alternative.

Wire management from desk to building power must be provided below carpet or power in the floor.

Grommets to be provided at desk, bridge, and credenza, all freestanding components to have leveling glides, storage components to have metal pulls.

Soft-close feature for all doors and drawers.

All storage components to be locking and keyed alike per workstation/desk.

No two offices keyed alike.

Workstation Typical D17, D17A, D17B, D17C, and D17D must come from the same manufacturer.

Refer to Furniture Plans I100A-I112C for desk handedness.

CONSTRUCTION:

Solid wood construction, grommets and drawer pulls to be metal.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Warranty

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Manufacturer Gunlocke

Product Name Silea (Wood Veneer)

Item Number TBD by manufacturer

Finishes VENEER FINISH:

Pinnacle Quarter Cut Walnut Veneer, QT679

METAL FINISH:

Silver Metal, PR6

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

Veneer Finish Metal Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

D17D EXECUTIVE OPEN OFFICE TYPICAL

Sheet No. Qty. Sheet No. Qty.

I103C 1

SIN:

2085 Open Office

LOCATIONS

Room No. Room Name Room No. Room Name

GSA CONTRACT GS-28F-0021Y QUANTITY 1

EXPIRATION DATE 3/31/2024 FREIGHT $0.00

GSA CONTRACT INFORMATION COST

FSC GROUP 71 33721 UNIT COST $0.00

BPA TOTAL COST $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

SHIPPING TERMS

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

S01A OPEN OFFICE TYPICAL 1

Warranty Limited lifetime; 12 years for laminate surfaces, lighting fixtures, modular power, glides; 5 years for doors, height adjustable mechanisms

Finishes LAMINATE & STORAGE FINISH:

Chalk White, S7024T (Laminate)/Chalk (Paint)

PANEL FABRIC:

Versatility, Marble 4X-DM7

GLASS FINISH:

Rain Glass

FRAME FINISH:

Metallic Champagne, TR-MC

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 6'-0" x 8'-0"

Description of

Salient Features

GENERAL:

Workstation with fabric panels and glass stackers, panels to be 2" thick max.

(1) 76"W x 29"D rectangular height adjustable desk with metal T-leg configuration, electric standard height range adjustment, square edge profile. One T-leg with

2nd height adjustable leg integrated into the adjacent storage/shelving unit.

Worksurface height adjustment range: 22.6" - 48.7"

(1) 72"W x 24"D rectangular laminate worksurface

(1) 36"W x 24"D 1-shelf open storage unit

(1) 36"W x 24"D 2-drawer lateral file

(1) 36"W overhead storage unit with sliding door and LED task lights mounted below

(1) 24"W x 64"H fabric panel; (1) 36"W x 64"H fabric panel

(3) 36"W x 48"H fabric panels

(3) 36"W x 16"H glass stackers

Panels to be tiled on the exterior and monolithic on the interior, provide keyboard tray, paper and wire management accessories. Provide pencil tray for lateral file. Provide knockouts at base and worksurface for power and data. Grommets to be provided at desk and return, all freestanding components to have leveling glides, storage components to have integral pulls.

CONSTRUCTION:

Worksurfaces to be laminate with vinyl edge bands, storage components and grommets to be painted metal, drawer pulls to be integral. System must be UL Certified. Frames must be welded with an integrated leveling system. System must have a Universal connector that allows for ease of reconfigurations using less parts. Provide fabric panel tiles that consist of a metal frame with integrated metal clips. Power and USB outlets must be provided above the worksurface. Provide one (1) programmable receptacle per workstation. It cannot be the dedicated receptacle.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications. In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Provde a Management Plan that meets the schedule and requirements and a Logistics Plan that indicates the delivery,storage and installation to coincide with the construction schedule.

Item Number Varies

Product Name Unigroup Too

Manufacturer Haworth

Panel Fabric Frame FinishLaminate & Storage Finish

Glass Finish

****************************************************************************************************************************Amdt. #0003

QTY.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

S01A OPEN OFFICE TYPICAL 1

Sheet No. Qty. Sheet No. Qty.

I101C 3

I102C 2

SIN:

LOCATIONS

Room No. Room Name Room No. Room Name

2072 Open Office

2072 Open Office

QUANTITY 5

GSA CONTRACT INFORMATION COST

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 8/6/2023 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-03F-057DA

****************************************************************************************************************************Amdt. #0003