W912QR22R0028_CUI_CF_CIDV2_FFE-0002.pdf

Controlled by: USACE-LRL-ED-MA CUI Category(ies):

LDC or Distribution Statement: N/A POC: Blake Gevedon Contracting Specialist william.b.gevedon@usace.army.mi 502.315.6791

Materials shall be submitted to potential offerors currently certified in the Joint Certification Program (JCP) only.

W912QR22R0028_CF_CIDV2_FFE-0002

Solicitation For Repair/Renovate AFMC Headquarters Building (B10262), WPAFB Phase 1

P2: 475429 Design-Bid-Build

Specifications CID VOL 2 FFE

10 November 2022

W912QR22R0028

90% Final Revised Spec Submittal

14 December 2022

W912QR22R0028-0002

Certified Final

ARIMS: 200A

Disposition: Maintain for 15yrs after construction

W912QR22R0028_CUI_CF_CIDV2_FFE-0002

Rev00

Repair/Renovate AFMC Headquarters Building (B10262)

Comprehensive Interior Design (CID) Package Volume Two - Furniture, Fixtures and Equipment (FF&E)

Project Number: ZHTV160500-262 P2 # 475429

Fiscal Year 2022

5 December 2022

US Army Corps of Engineers Louisville District

CONTROLLED

UNCLASSIFIED

INFORMATION

Controlled by: USACE Controlled by: Louisville District CUI Category: CUI Basic Distribution/Dissemination Controls: Distribution B POC: Steve Skaggs, 502-315-6368

W912QR22R0028_CUI_CF_CIDV2_FFE-0002

charbokb Interiors

CERTIFIED FINAL DESIGN, WITHOUT PRICING

charbokb Interiors Phase 1

Repair/Renovate AFMC Headquarters Building

(B10262), Wright-Patterson AFB

Phase 1 – Certified Final Design

Comprehensive Interior Design (CID) Package

Volume Two – Furniture, Fixtures and Equipment (FF&E), without Pricing

Submitted: 5 December 2022

U.S. Army Corps of Engineers Louisville District

Project Number: ZHTV160500-262 P2 # 475429

Document Title

Client Name

Controlled Unclassified Information

Phase 1 – Certified Final Design

Volume Two – Furniture, Fixtures and Equipment

FES0625201647BOI i

Comprehensive Interior Design Package

Volume Two – Furniture, Fixtures & Equipment

Table of Contents

Section 1 Narrative of Interior Design Objectives

Section 2 FF&E Item Code Legend

Section 3 Furniture Order Forms

Section 4 FF&E Manufacturer Matrix of Alternates

Section 5 Points of Contact

Section 6 Color Boards

Section 7 Furniture Footprint Plans

For additional information and questions please contact the Designer of Record:

Kathryn Charboneau, CID, IIDA

Jacobs

1100 N. Glebe Road, Suite 500

Arlington, Virginia 22201

Phone: (703) 628-2013

Kathryn.Charboneau@jacobs.com

1. Narrative of Interior Design Objectives

A Comprehensive Interior Design (CID) Package is provided as part of this project. The CID Package is comprised of two parts; the Structural Interior Design (SID) Package which includes all building related finishes and the furniture footprint layout, and the Furniture, Fixtures and Equipment (FF&E) Package which is the selection, layout, documentation, and specification of furniture for the building. The FF&E

Package may include the workstations, office furniture, seating, tables, filing and storage, trash receptacles, clocks, and specialty equipment.

Proper documentation is required to facilitate pricing, procurement, and installation. This FF&E package is based on the furniture footprint layout of all items noted on the Furniture Plan sheets in the contract documents. The furniture and equipment layouts have been coordinated with electrical to provide proper connections and placement of electrical outlets, switches, junction connections, data outlets and lighting in all areas.

All products selected are functional, ergonomic in design, and aesthetically pleasing. Furniture items are selected for their durability in construction, and sustainable properties.

Furniture, Fixtures & Equipment (FF&E)

The FF&E Package will include the following components:

• Private Offices will receive wood veneer and/or plastic laminate case goods furniture. Guest or side chairs will be provided in all private offices. Soft seating and side tables will be provided adjacent to select offices for waiting visitors. The main desk surface will be a height-adjustable work surface to provide an ergonomically comfortable working position. All components of the private office desks are incorporated in the Furniture Order Forms.

• Open Office systems furniture workstations will be a panel-based system. The standard workstation size is 6’-0” x 8’-0” (48 sf). Larger workstations are provided in secure areas to provide proper separation of systems to meet security requirements. The workstations have a glass stacker panel at the top are 64” tall overall. There is an enclosed 8’-0” x 8’-0” (64 sf) workstation with a sliding door for all Branch Chiefs. These workstations are a total of 78” tall.

Each workstation will have one height-adjustable work surface to provide an ergonomically comfortable working position. All workstation components are incorporated in the Furniture

Order Forms.

• Ergonomic task chairs along with monitor arms and task lighting will be provided in all private offices and open workstations.

• Conference Rooms and collaborative meeting spaces are planned throughout the building to support the mission and function of the users. Each room will be equipped with an appropriately sized meeting table, ergonomic conference chairs and additional side chairs where applicable.

• Storage components, lateral files, bookcases, and safes are located with the user groups to meet their functional requirements needs.

FES0625201647BOI 2-2

2. FF&E Item Code Legend

T03 Boat-Shaped Conference Table (Laminate) 42/96"

T08 Boat-Shape Conference Table (Laminate) 54/144"

T18 Wedge-Shaped Table (Laminater) 36/76/168"

T33 Round Occasional Side Table 20/20"

T35 Round Occasional Table 18"

T37 Square Occasional Table 20"

Large Conference Room Chair

Large Conference Room Side Chair

Lounge Chair - Reception/Guest

Situation Room Task Chair & Command Suite Side Chair

Situation Room Side Chair

Lounge Chair - Command Suite

Private Office Desk Typical

C05 Office Guest Chair

C08 Medium Conference Room Chair

C10

C11

C16

C22

C23

C01-C

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ACCESSORIES

FF&E ITEM CODE LEGEND

A01 Trash Bin 7 Gallon

CODE ITEM DESCRIPTION

A02 Clock

A05 Waste Receptacle

A06 Recycling Receptacle

Task Chair

D17D

D17B Executive Open Office Typical

STORAGE

Executive Open Office Typical

A07 Waste Bin

D17A

C03 Office Task Chair

Desk, Benching Station, 24" x 48"

D09 Desk, Benching Station, 30" x 60"

D17

SEATING

C02-C Office Task Chair

C26 Nursing Room Chair

DESKS

Executive Open Office Typical

D02B Private Office Desk Typical (FOG)

C25

D17C Executive Open Office Typical

G15 Lectern

T02 Boat-Shaped Conference Table (Laminate) 42/84"

D03B Private Office Desk Typical (FOG)

D04B Private Office Desk Typical (FOG)

D05

SYSTEMS WORKSTATIONS

S01A Open Office Typical 1

TABLES

T01 Round Meeting Table (Laminate) 36"

G06 Storage Case 36"/5H

D08

Executive Open Office Typical

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

FF&E ITEM CODE LEGEND

CODE ITEM DESCRIPTION

AV3 75" TV Screen

E03 Microwave

E04 Refrigerator (UC)

EQUIPMENT

AUDIO VISUAL EQUIPMENT

E01 Refrigerator (FS)

FES0625201647BOI 3-3

3. Furniture Order Forms

The following Furniture Order Forms are divided into the following categories/sections and correlate with the FF&E legend in the drawing set.

• 3.1 ACCESSORIES

• 3.2 SEATING

• 3.3 DESKS

• 3.4 STORAGE

• 3.5 SYSTEMS WORKSTATIONS

• 3.6 TABLES

• 3.7 EQUIPMENT

• 3.8 AV EQUIPMENT

FES0625201647BOI 3-4

3.1 ACCESSORIES

QTY.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

FINISH:

Grey Plastic

1 year limited

Finishes

Notes

GENERAL:

3.5 gallon soft molded rectangular wastebasket, rolled rims, all-plastic construction.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

11 1/2"W x 8 1/8"D x 12"H

Description of

Salient Features

Dimensions

Warranty

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE

A01

ITEM

TRASH BIN 7 GALLON

Product Name Trash Bin

Manufacturer

Item Number

Rubbermaid

RCP2955GRA (GSA Advantage)

Finish

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE

A01

ITEM

TRASH BIN 7 GALLON

Sheet No. Qty. Sheet No. Qty.

I101C 6

I101C 1

I101C 1

I101C 1

I101C 1

I101C 1

I101C 1

I101C 3

I102C 2

I102C 1

I102C 1

I102C 1

I102C 1

I102C Office 0

I102C Office 1

I102C Control Room 1

I102C Nursing 1

I103C Open Office 4

I103C Office 2

I103C Restroom 1

I103C Open Office 4

I103C Office 2

I103C Restroom 1

I103C Restroom 1

I103C Office 2

SIN:

LOCATIONS

Office

Room No. Room Name

2062 Office

2065 Office

Room Name

2077 Office

Room No.

2058 Open Office

2061 Office

2063 Office

Office

2072 Open Office

2080 Control Room

GSA CONTRACT INFORMATION COST

$0.00

MAS/332510C

GS-21F-0035T

8/21/2024

$0.00

$0.00

$0.00

FSC GROUP N/A

GSA CONTRACT

EXPIRATION DATE

MAXIMUM ORDER LIMIT

SHIPPING TERMS

UNIT COST

QUANTITY

FREIGHT

INSTALLATION

BPA TOTAL COST

2072 Open Office

2078 Office

2085 Open Office

Finishes FINISH:

Silver

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A02 CLOCK

Warranty 3 years

Manufacturer

Product Name

Item Number T9A695324

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 14" Dia. x 2 1/2"D

Description of

Salient Features

GENERAL:

Black easy to read numerals and minute markers on white face, stainless steel frame with glass lens, easy mount, quartz movement. Battery operated.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Global Industrial

Wall Clock

Finish

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A02 CLOCK

Sheet No. Qty. Sheet No. Qty.

I101C 1

I102C 1

I102C 1

SIN:

2060 Collaboration Room

2083 Conference Room - VTC

2088 Conference Room - VTC

LOCATIONS

Room No. Room Name Room No. Room Name

FSC GROUP 71 71315 UNIT COST $0.00

GSA CONTRACT GS-07F-0323N QUANTITY 3

GSA CONTRACT INFORMATION COST

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/31/2023 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

Finishes BODY/TOP:

Anodized Silver

PICTOGRAM LABEL:

White

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 9"W x 18"D x 33-3/4"H

Description of

Salient Features

GENERAL:

20-Gallon waste recepacle with internal rigid liner and integrated bag arms.

Steel construction with powder coat finish.

Rectangular waste top opening (4-1/4" x 13-3/16").

Multi-lingual pictogram "Waste" label.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Item Number

Product Name Valuta

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A05 WASTE RECEPTACLE

Warranty 2 years

Magnuson Group

RCP2955GRA (GSA Advantage)

Body/Top Pictogram Label

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A05 WASTE RECEPTACLE

Sheet No. Qty. Sheet No. Qty.

I101C 1

I101C 1

I103C 1

I103C 1

SIN:

BPA TOTAL COST $0.00

EXPIRATION DATE 11/22/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

SHIPPING TERMS

UNIT COST $0.00

GSA CONTRACT GS-28F-0004R QUANTITY 4

GSA CONTRACT INFORMATION COST

FSC GROUP 71 71207

2092 Copy/Coffee

2075 Copy/Coffee

2099 Kitchen

LOCATIONS

Room No. Room Name Room No. Room Name

2067 Copy/Coffee

Finishes BODY/TOP:

Anodized Silver

PICTOGRAM LABEL:

White

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 9"W x 18"D x 33-3/4"H

Description of

Salient Features

GENERAL:

20-Gallon recycle recepacle with internal rigid liner and integrated bag arms.

Steel construction with powder coat finish.

Co-mingle top opening (2" x 12" x 4-1/4").

Multi-lingual pictogram "Recycling" label.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Item Number

Product Name Valuta

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A06 RECYCLE RECEPTACLE

Warranty 2 years

Magnuson Group

RCP2955GRA (GSA Advantage)

Body/Top Pictogram Label

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A06 RECYCLE RECEPTACLE

Sheet No. Qty. Sheet No. Qty.

I101C 1

I101C 1

I103C 1

I103C 1

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 11/22/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 71207 UNIT COST $0.00

GSA CONTRACT GS-28F-0004R QUANTITY 4

GSA CONTRACT INFORMATION COST

2092 Copy/Coffee

2075 Copy/Coffee

2099 Kitchen

LOCATIONS

Room No. Room Name Room No. Room Name

2067 Copy/Coffee

Finishes BODY:

Britebond Silver

TOP/LABEL:

Sky White

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 18-5/16"W x 12-1/4"D x 30"H

Description of

Salient Features

GENERAL:

24-Gallon waste receptacle with internal liner and bag ring.

Steel construction with powder coat finish.

Rectangular waste top opening.

Multi-lingual pictogram "Waste" label.

Adjustable glides.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Item Number

Product Name Trada

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A07 WASTE BIN

Warranty 2 years

Magnuson Group

RCP2955GRA (GSA Advantage)

Body Top/Label

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

A07 WASTE BIN

Sheet No. Qty. Sheet No. Qty.

I101C 1

I101C 1

I102C 1

I101C 1

I102C 2

I102C 1

I103C 1

I103C 2102 Men 1

SIN:

BPA TOTAL COST $0.00

EXPIRATION DATE 11/22/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

SHIPPING TERMS

UNIT COST $0.00

GSA CONTRACT GS-28F-0004R QUANTITY 9

GSA CONTRACT INFORMATION COST

FSC GROUP 71 33721

2068 Women

2070 Men

2088 Conference Room - VTC

2100 Women

2073 Production Work Area

2083 Conference Room - VTC

LOCATIONS

Room No. Room Name Room No. Room Name

2060 Collaboration Room

FES0625201647BOI 3-5

3.2 SEATING

Finishes SEAT UPHOLSTERY:

Cogent Connect, Royal Blue 5SD0

BACK KNIT/UPHOLSTERY:

3D Knit, Nickel

BASE:

Light (to match frame)

FRAME:

Light/Light

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C01 TASK CHAIR

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Warranty Frame and Mechanisms: Minimum 12 years; Upholstery: Minimum 12 years

Manufacturer

Product Name

Item Number

Steelcase

Gesture Work Chair, 4D Arm, Casters, Lumbar support

442A30

Dimensions 22-3/8 - 34-5/8"W x 21 - 23-5/8"D x 39-1/4 - 44-1/4"H (Max.)

Description of

Salient Features

GENERAL:

Ergonomic task chair with adjustable lumbar support: minimum 4" adjustment.

Upholstered seat with 3D knit upholstered back and fabric wrapped upper back shell.

Fully adjustable arms (Height/width/depth) with 15 degree inward/outward pivot.

Five-star base with universal casters.

Minimum (3) height adjustment options.

360 degree rotation.

Synchronous tilt mechanism, adjustable with tension knob.

Chair is easily cleanable with soft cloth and mild detergent/water.

Controls shall be visible and easy to reach from seated position on both sides of the chair.

Variable back stop allows user to set the backrest within the reclining range; including an upright lock.

SEAT CONSTRUCTION:

Upholstered seat pad with moisture barrier.

Waterfall edge seat.

Seat shall not have hard edges which can create pressure points that lead to discomfort.

FRAME CONSTRUCTION:

Welded tubular steel construction.

Secondary steel insert.

Powder coat painted.

UPHOLSTERY:

100% Polyester (Antimony-free and Cradle-to-Cradle certified)

100,000 double rubs (Wyzenbeek) durability

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

Seat Upholstery Back Knit/Upholstery Frame

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C01 TASK CHAIR

Sheet No. Qty. Sheet No. Qty.

I101C 6

I101C 3

I102C 8

I102C 2

I102C 2

I103C 2

I103C 4

I101C 1

I101C 1

I101C 1

I101C 1

I101C 1

I101C 1

I102C 1

I102C 1

SIN:

2085 Open Office

2061 Office

2085 Open Office

LOCATIONS

Room No. Room Name Room No. Room Name

2072 Open Office

2080 Control Room

Open Office

Open Office

2093 Open Office

2065 Office

2063 Office

2064 Office

Office

2066 Office

2077 Office

Office

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-27F-0014V QUANTITY 35

GSA CONTRACT INFORMATION COST

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/12/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

Finishes SEAT UPHOLSTERY:

COM Edelman Leather, Stella, Grey Lock ST06

BACK KNIT/UPHOLSTERY:

COM Edelman Leather, Stella, Grey Lock ST06

(inlcudes headrest)

BASE:

Light (to match frame)

FRAME:

Light/Light

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 24"W x 25"D x 39-1/4 - 44-1/4"H (Max.)

Description of

Salient Features

GENERAL:

24/7 Ergonomic task chair with upholstered seat, back, and adjustable headrest.

Adjustable lumbar support.

5" pneumatic seat-height adjustment range: 16 - 21"H.

360 degree independent height-, width-, pivot-, and depth-adjustable arms and black plastic, soft arm caps. Seat depth adjustment: 2-3/4".

Five-star base with 2-1/2" diameter, hard-composition, dual-wheel casters.

Controls shall be visible and easy to reach from seated position on both sides of the chair

Variable back stop allows user to set the backrest within the reclining range; including an upright lock

SEAT CONSTRUCTION:

Upholstered seat pad with moisture barrier.

Waterfall edge seat.

Seat shall not have hard edges which can create pressure points that lead to discomfort.

FRAME CONSTRUCTION:

Welded tubular steel construction.

Secondary steel insert.

Powder coat painted.

UPHOLSTERY:

100% Leather. European full grain aniline-dyed cowhide.

Durable protective finish, EDGE stain release.

Smooth, tight grain. 0.9-1.1 mm thickness.

Leather seat upholstery complies with abrasion ASTM D 7255. Greenguard Gold Certified.

Breaking Force complies with ASTM 2208 (100 lbs.)

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry.

Manufacturer

Product Name

Item Number

Steelcase

Gesture Work Chair with Headrest, 4D Arm, Casters, Lumbar support

442A50

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C03 OFFICE TASK CHAIR

Warranty Frame and Mechanisms: Minimum 12 years; Upholstery: Minimum 12 years

Seat & Back Upholstery Frame

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C03 OFFICE TASK CHAIR

Sheet No. Qty. Sheet No. Qty.

I102C 1

I103C 1

I103C 1

I103C 1

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/12/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-27F-0014V QUANTITY 4

GSA CONTRACT INFORMATION COST

2097 Office

2090 Office

2094 Office

LOCATIONS

Room No. Room Name Room No. Room Name

2087 Office

Finishes UPHOLSTERY:

Designtex, Barcelona Crypton, Mist 3108-801

LEGS:

Black Oak VP02

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C05 OFFICE GUEST CHAIR

Warranty Minimum 12 years; Upholstery: Minimum 3 years

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 24-5/8"W x 25-1/8"D x 32-5/8"H

Description of

Salient Features

GENERAL:

Guest chair with upholstered seat, back and arms.

Hardwood legs with polyethylene glides.

Mid-century style. Back and Arms to be connected.

SEAT CONSTRUCTION:

Upholstered seat.

FRAME CONSTRUCTION:

Beech hardwood 4-leg base.

UPHOLSTERY:

100% Polyester

Greenguard Certified

100,000 double rubs (Wyzenbeek) durability

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Steelcase

West Elm Sterling Chair

WESMDC4WA

Upholstery Legs

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C05 OFFICE GUEST CHAIR

Sheet No. Qty. Sheet No. Qty.

I101C 1

I101C 4

I101C 4

I101C 1

I101C 1

I101C 4

I102C 2

I102C 1

I102C 3

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/12/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-27F-0014V QUANTITY 21

GSA CONTRACT INFORMATION COST

2078 Office

2086 Office

2066 Office

2077 Office

2065 Office

Office

Office

Office

LOCATIONS

Room No. Room Name Room No. Room Name

2061 Office

Finishes UPHOLSTERY:

Tortora, 60-23

BASE:

Polished Chrome 24-407

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 27"W x 28"D x 27 - 31"H (Max.)

Description of

Salient Features

GENERAL:

Low back, upholstered conference chair with fixed arms.

Horizontal stitching on seat and back.

Pneumatic height adjustment.

Seat height range: 18 - 22"H.

Locking tilt mechanism.

Five-star base with grey plastic casters suitable for semi-soft surfaces.

SEAT CONSTRUCTION:

Molded plywood with polyurethane padding.

FRAME CONSTRUCTION:

Polished chrome die-cast aluminum base.

UPHOLSTERY:

100% Leather

European full grain aniline-dyed cowhide. Durable protective finish, EDGE stain release.

Smooth, tight grain. 0.9-1.1 mm thickness.

Leather seat upholstery complies with abrasion ASTM D 7255. Greenguard Gold Certified. Breaking

Force complies iwth ASTM 2208 (100 lbs.)

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Haworth

Lotus Medium-Back Chair

HCCE-LTHL-1521

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C08 MEDIUM CONFERENCE ROOM CHAIR

Warranty Frame and Mechanisms: Minimum 12 years; Upholstery: Minimum 5 years

Upholstery Base

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C08 MEDIUM CONFERENCE ROOM CHAIR

Sheet No. Qty. Sheet No. Qty.

I101C 10

I102C 12

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 8/6/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-03F-057DA QUANTITY 22

GSA CONTRACT INFORMATION COST

LOCATIONS

Room No. Room Name Room No. Room Name

2072 Open Office

2060 Collaboration Room

Finishes UPHOLSTERY:

Maharam Apt, Cobblestone 466392-011

BASE:

Polished Aluminum CD

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 25-3/4"W x 27"D x 38-3/4"H (Max.)

Description of

Salient Features

GENERAL:

Fully upholstered, high-back conference chair with polished aluminum five-star base and casters.

Seat height range: 17-1/2" - 21-1/4"H

Mid-century style. Back and Arms to be connected.

SEAT CONSTRUCTION:

Rigid urethane shell with polyurethane foam.

High density foam cushion.

FRAME CONSTRUCTION:

Five-star die cast aluminum base with swivel.

UPHOLSTERY:

100% Polyurethane/Silicone

500,000 double rubs (Wyzenbeek) durability

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Geiger

Saiba High-Back Chair

SBN3H

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C10 LARGE CONFERENCE ROOM CHAIR

Warranty Minimum 12 years, 3 shifts (labor included); Upholstery: Minimum 3 years

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C10 LARGE CONFERENCE ROOM CHAIR

Sheet No. Qty. Sheet No. Qty.

I102C 11

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 12/2/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-28F-0012W QUANTITY 11

GSA CONTRACT INFORMATION COST

LOCATIONS

Room No. Room Name Room No. Room Name

2088 Conference Room - VTC

Finishes UPHOLSTERY:

Maharam Manner, Silverpoint 466177-029

BASE:

Polished Aluminum CD

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C11 LARGE CONFERENCE ROOM SIDE CHAIR

Warranty Minimum 12 years, 3 shifts (labor included); Upholstery: Minimum 5 years

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 25-3/4"W x 24-1/4"D x 33-1/4"H

Description of

Salient Features

GENERAL:

Fully upholstered, mid-back lounge chair with metal 4-star base and glides.

SEAT CONSTRUCTION:

Rigid urethane shell with polyurethane foam.

High density foam cushion.

Mid-century style. Back and Arms to be connected.

FRAME CONSTRUCTION:

Four-star die cast aluminum base with swivel.

UPHOLSTERY:

75% Wool, 10% Linen, 8% Nylon, 7% Alpaca blend

40,000 double rubs (Wyzenbeek) durability

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Geiger

Saiba Mid-Back Side Chair

SBN1M

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C11 LARGE CONFERENCE ROOM SIDE CHAIR

Sheet No. Qty. Sheet No. Qty.

I102C 14

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 6/18/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-03F-036DA QUANTITY 14

GSA CONTRACT INFORMATION COST

2088 Conference Room - VTC

LOCATIONS

Room No. Room Name Room No. Room Name

Finishes UPHOLSTERY:

Geiger/Herman Miller Textiles, Vaquero, Sapphire 1GN06

SHELL:

Walnut OU

BASE:

Trivalent Chrome 47

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 33"W x 29"D x 32"H

Description of

Salient Features

GENERAL:

Lounge chair with molded plywood shell.

Upholstered seat, arms, and back.

4-Leg steel base with glides.

SEAT CONSTRUCTION:

Upholstered foam seat with 3/8" thick molded plywood shell.

FRAME CONSTRUCTION:

Tubular steel base.

UPHOLSTERY:

100% Polyurethane leather-alternative

SCS Indoor Advantage Gold

100,000 double rubs (Wyzenbeek) durability

Moisture Barrier, Bleach Cleanable, SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Herman Miller

Swoop Plywood Lounge Chair

0A200

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C16 LOUNGE CHAIR - RECEPTION/GUEST

Warranty Minimum 12 years, 3 shifts (labor included); Upholstery: Minimum 5 years

Upholstery Shell Base

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C16 LOUNGE CHAIR - RECEPTION/GUEST

Sheet No. Qty. Sheet No. Qty.

I102C 5

I103C 2

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 6/18/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-03F-036DA QUANTITY 7

GSA CONTRACT INFORMATION COST

2085 Open Office

LOCATIONS

Room No. Room Name Room No. Room Name

2103 Reception/Waiting

Finishes UPHOLSTERY:

COM Edelman Leather, Dream Cow, Tin DRC163

WOOD DECOR:

394 Lowell Ash Finish on Cherry Veneer

ARMS/BASE:

Polished Aluminum

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 26-1/2"W x 23-1/2"D x 43-1/2 - 47-1/2"H (Max.)

Description of

Salient Features

GENERAL:

High-back conference chair with upholstered seat and back.

Seat and back wood veneer over curved plywood wood decor.

Seat height adjustment, Maximum height: 21-3/4".

Fixed aluminum arms with urethane cap.

Synchronized tilt control, tile lock, tension control, and pneumatic height adjustment.

Polished aluminum 5-star base with black hard casters.

Chair C22 and C23 must come from the same manufacturer.

SEAT CONSTRUCTION:

Upholstered seat and back in high resiliency molded foam.

Waterfall edge seat.

Seat shall not have hard edges which can create pressure points that lead to discomfort.

FRAME CONSTRUCTION:

Die-cast aluminum base, polished aluminum finish.

UPHOLSTERY:

French stitched upholstery.

European full grain aniline-dyed cowhide. Durable protective finish, EDGE stain release.

Smooth, tight grain. 0.9-1.1 mm thickness.

Leather seat upholstery complies with abrasion ASTM D 7255. Breaking Force complies iwth ASTM

2208 (100 lbs.)

Greenguard Gold Certified.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Meets all ergonomic guidelines by ANSI/HFES 2007 Requirements -Human Factors Engineering of

Computer Workstations

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Gunlocke

Olla Executive Conference Chair

GK2804

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C22 SITUATION ROOM TASK CHAIR & COMMAND SUITE SIDE CHAIR

Warranty Frame and Mechanisms: Minimum 12 years; Upholstery: Minimum 5 years

Upholstery Arms/BaseWood Decor

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C22 SITUATION ROOM TASK CHAIR & COMMAND SUITE SIDE CHAIR

Sheet No. Qty. Sheet No. Qty.

I102C 19

I102C 6

I103C 8

I103C 8

I103C 8

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/12/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-27F-0014V QUANTITY 49

GSA CONTRACT INFORMATION COST

2094 Office

2097 Office

2087 Office

2090 Office

LOCATIONS

Room No. Room Name Room No. Room Name

2083 Conference Rm. - VTC

Finishes UPHOLSTERY:

COM Edelman Leather, Dream Cow, Tin DRC163

FRAME:

Polished Chrome

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 24-1/4"W x 24"D x 34-3/4"H

Description of

Salient Features

GENERAL:

Cantilever guest chair with upholstered seat and back.

Fixed aluminum arms with urethane cap.

SEAT CONSTRUCTION:

Upholstered seat and back in high resiliency molded foam.

Waterfall edge seat.

Seat shall not have hard edges which can create pressure points that lead to discomfort.

Chair C22 and C23 must come from the same manufacturer.

FRAME CONSTRUCTION:

Aluminum base, Chrome finish.

UPHOLSTERY:

French stitched upholstery.

European full grain aniline-dyed cowhide. Durable protective finish, EDGE stain release.

Smooth, tight grain. 0.9-1.1 mm thickness.

Leather seat upholstery complies with abrasion ASTM D 7255. Breaking Force complies iwth ASTM

2208 (100 lbs.)

Greenguard Gold Certified.

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Gunlocke

Olla Executive Guest Chair

GK2801C

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C23 SITUATION ROOM SIDE CHAIR

Warranty Minimum 12 years; Back Upholstery: Minimum 3 years; Seat Upholstery: Minimum 5 years

FrameUpholstery

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C23 SITUATION ROOM SIDE CHAIR

Sheet No. Qty. Sheet No. Qty.

I102C 23

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 8/6/2023 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-03F-057DA QUANTITY 23

GSA CONTRACT INFORMATION COST

LOCATIONS

Room No. Room Name Room No. Room Name

2083 Conference Rm. - VTC

Finishes UPHOLSTERY:

Fedora, Bitumen 621-006

LEGS:

Platinum Matte 4141

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.

PRODUCT SHALL MEET THE FOLLOWING SALIENT FEATURES:

Dimensions 32"W x 30"D x 31"H

Description of

Salient Features

GENERAL:

Lounge chair with upholstered seat, back, and arms.

4-Leg steel base.

Upholstered arms are 6" wide each.

SEAT CONSTRUCTION:

Multiple densities of polyurethane foams and polyester fiber.

Upholstered seat and back have a tufted pattern accents/quilted pattern accents with a double needle top-stitch.

Attached seat cushion with loose back cushions (with attachment straps).

FRAME CONSTRUCTION:

Finger jointed plywood construction.

Painted steel, 4-leg base with durable plastic glides.

UPHOLSTERY:

100% Polyester

Stain-repellent finish - PFOA free

Greenguard Gold certified

100,000 double rubs (Wyzenbeek) durability

SPECIFIC COMPLIANCE:

Product must be from ISO 9001 and/or ISO14001 accredited facilities

Chairs shall meet or exceed all ANSI/BIFMA X5.1, X6.1 testing standards and certifications

Furniture must be certified to meet the emissions required for low-emitting ANSI/BIFMA X7.1 standards and certifications

Seating pad and upholstery shall comply with BIFMA flammability standards

In lieu of disposing furniture in a landfill at the end of its useful life, manufacturer shall provide opportunities for customer to recycle, resell or refurbish their used furniture

Product shall be minimum Level ® 1 Certified with the BIFMA e3 Furniture Sustainability Standards to meet or exceed the most current environmental standards in the furniture industry

Manufacturer

Product Name

Item Number

Steelcase/Coalesse

Millbrae Lounge Chair

COMFLA1

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C25 LOUNGE CHAIR - COMMAND SUITE

Warranty Minimum 12 years; Upholstery: Minimum 5 years

Upholstery Legs

WRIGHT-PATTERSON AIR FORCE BASE

AIR FORCE MATERIEL COMMAND HEADQUARTERS | REPAIR/RENOVATE BUILDING 10262 | DAYTON, OHIO

PHASE 1 - CERTIFIED FINAL DESIGN

5 DECEMBER 2022

ITEM CODE ITEM

C25 LOUNGE CHAIR - COMMAND SUITE

Sheet No. Qty. Sheet No. Qty.

I103C 2

I103C 2

I103C 2

SIN:

SHIPPING TERMS

BPA TOTAL COST $0.00

EXPIRATION DATE 3/12/2024 FREIGHT $0.00

MAXIMUM ORDER LIMIT INSTALLATION $0.00

FSC GROUP 71 33721 UNIT COST $0.00

GSA CONTRACT GS-27F-0014V QUANTITY 6

GSA CONTRACT INFORMATION COST

2094 Office

2097 Office

LOCATIONS

Room No. Room Name Room No. Room Name

2090 Office

Finishes UPHOLSTERY:

Momentum Silica Etch Nickel 9157971

LEGS & ARM CAPS:

Graphite Walnut 3062

Notes 1. Field verify all dimensions, and check existing site conditions for any obstructions including but not limited to, power and data, windows, columns, thermostats, etc.

2. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.

3. Contractor shall verify that…