W91242-17-B-0005-0002.pdf

SEE SCHEDULE 371301

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

National Guard Readiness Center, Wilmington, North Carolina

Please see next pages for amendment details

1. CONTRACT ID CODE PAGE OF PAGES

J 1 11

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 19-Aug-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W91242-17-B-0005

X 9B. DATED (SEE ITEM 11)

24-Jul-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

19-Aug-2017

CODE

USPFO FOR NORTH CAROLINA (W91242)

ATTN:MAJ DEREK MEILINGER

4201 REEDY CREEK ROAD

RALEIGH NC 27607-6412

W91242 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W91242-17-B-0005

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0002

Amendment 0002

North Carolina Army National Guard (NCARNG)

Wilmington Readiness Center

This Addendum forms a part of the Contract Documents and modifies the Bidding Documents with amendments and additions noted below. Acknowledge receipt of this Amendment in the Bid Form.

Failure to do so may subject Bidder to disqualification.

Amendment No. 2.consists of descriptive changes and revised drawings listed below. Revised specifications and drawings are also provided with this amendment. Additions are underlined. Deletions are strikethrough.

This amendment also adds Table 1 in Section 00010 which is required to be submitted at the Bid Opening Day. The submission of this table/schedule is in addition to the submission of pricing for all Line Items in Section 00010, starting in page 3 of the solicitation after the SF1442.

DESCRIPTIVE CHANGES

GENERAL CHANGES:

1. STORMWATER PERMIT

a. Contractor shall be responsible for survey and all other documentation required for demonstration of compliance with permit requirements throughout construction and as necessary for permit closeout. Refer to the attached permit.

2. LAND DISTURBANCE PERMIT

a. Contractor shall be responsible for compliance and inspection logs in accordance with the approved land disturbance permit throughout construction and as necessary for permit closeout. Refer to the attached permit.

CHANGES TO SPECIFICATIONS:

1. SECTION 013300 – SUBMITTAL PROCEDURES:

a. Article 1.8.C. Revise to read "Document Incorporation: Incorporate delegated design drawing and data files in the CADD drawing format established for the project. AutoCAD, latest version."

2. SECTION 083313 – COILING COUNTER DOORS:

a. Article 2.2.B; change “50,000” to “20,000”.

b. Article 2.2.I; delete sub-article 1. Operation is push-up.

c. Article 2.8.A; delete.

d. Article 3.3.A; delete sub-article 3. Door is not fire-rated.

e. Article 3.4.C; delete sub-article C.

3. SECTION 083323 – OVERHEAD COILING DOORS

a. Article 2.3.F; delete sub-article 1.

b. Article 2.3.G; delete, “and finished to match door”.

c. Article 2.3.H; delete, “with exposed finish matching curtain slats”.

d. Article 2.4.E; delete entirely.

e. Article 2.7.A; Add at the end of the paragraph “Provide stainless steel hoods for stainless steel doors. Provide galvanized hoods for aluminum doors.”

f. Article 2.11; delete sub-article A. Operation is push-up for door 132E.

4. SECTION 084113 – ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

a. Article 2.2.A; change “35DH” to “35D”.

b. Article 2.3.A.1.a; delete.

5. SECTION 084413 – GLAZED ALUMINUM CURTAIN WALLS

a. Article 1.4.A.1; change to read as follows: “Testing Program: Provide manufacturers informational Lab Mockup testing data for the products specified for this project.”

b. Article 1.8.A; change to read as follows: “Preconstruction Laboratory Mockups: Provide manufacturers informational testing data for products specified for use on this project.

Testing data shall be from a mockup representative of the size and configuration of the application and product specified for this project.”

c. Article 1.8.B: delete in its entirety.

6. SECTION 087100 – DOOR HARDWARE

a. Delete current Set #1, 34, 35, 36, 37, and 38. Replace with the following:

b. SET #1:

Doors: 101A

1 Exit Device 4501 RIM 48” US26D HA 1 Exit Device Trim 45NL ARC US26D HA 1 Rim Cylinder Housing 3901 SFIC US26D HA 1 Cylinder Core 3982-C US26D HA 1 Closer 5100 5955-HDCS ALM HA 1 Drip Cap 810S x LAR MIL HA 1 Set Weatherstrip 881S N x LAR MIL HA 1 Door Bottom 770S V x LAR MIL HA 1 Threshold 520S V 48” MIL HA

NOTE: Hinges by Door Supplier

c. SET #34:

Doors: 130, 133A, 133E, 144

1 Lockset 3880 SECT ARC SFIC 7 US26D HA 1 Cylinder Core 3982-C US26D HA 1 Closer 5100 5955-HDCS ALM HA 1 Drip Cap 810S x LAR MIL HA 1 Set Weatherstrip 881S N x LAR MIL HA

1 Threshold 520S V 36” MIL HA

d. SET #35:

Doors: 132A, 132B, 134, 140A, 141A, 142, 143A, 147A

2 Exit Device 4501 RIM F 36” US26D HA

1 Rim Cylinder Housing 3901 SFIC US26D HA 1 Cylinder Core 3982-C US26D HA 2 Closer 5100 5955-HDCS ALM HA 1 Set Weatherstrip 881S N x LAR MIL HA 1 Drip Cap 810S x LAR MIL HA 2 Mullion Seal 710S x LAR CH HA 2 Door Bottom 770S V x LAR MIL HA 2 Threshold 520S V 72” MIL HA

NOTE: Hinges removable mullion by Door Supplier

e. SET #36:

Doors: 156A, 157A, 158A

1 Exit Device 4501 RIM F 36” US26D HA

1 Rim Cylinder Housing 3901 SFIC US26D HA

1 Cylinder Core 3982-C US26D HA 1 Closer 5100 5955-HDCS ALM HA 1 Set Weatherstrip 881S N x LAR MIL HA 1 Drip Cap 810S x LAR MIL HA

1 Threshold 520S V 36” MIL HA

f. SET #37:

Doors: 158A

2 Exit Device 4501 RIM 36” US26D HA 1 Exit Device Trim 45CE ARC ET EU US26D HA 1 Cylinder Core 3982-C US26D HA 1 Mortise Cylinder Housing 3902 SFIC 1 5/8” US26D HA 2 Closer 5100 5955-HDCS ALM HA 1 Power Supply 2908 HA 1 Access Control Module 2-679-0704 HA 1 Power Transfer 2-679-0624 DBZ HA 1 Set Weatherstrip 881S N x LAR MIL HA 2 Drip Cap 810S x LAR MIL HA 2 Door Bottom 770S V x LAR MIL HA 2 Door Sweep 756S V 84” MIL HA 1 Threshold 520S V 72” MIL HA

NOTE: Hinges, Removable Mullion by Door Supplier. Card Reader by Security Contractor

g. SET #38:

Doors: 133B, 133D

NOTE: Hardware by Overhead Door Supplier

7. SECTION 114000 – FOOD SERVICE EQUIPMENT

a. Page 13; Delete the Unit Price Table.

b. Page 14; Change Item 29 Coffee Maker from Category “A” to Category “B”.

8. SECTION 133423.10 – FABRICATED STORAGE BUILDING:

a. Paragraph 2.1.A.4 – Revise “Risk Category: As required by code and based on quantities of hazardous materials” to “Risk Category: III”

b. Paragraph 2.1.A.6.d change “Seismic Importance Factor, IE: As required by code and based on quantities of hazardous materials.” to “Seismic Importance Factor, IE: 1.25”

c. Paragraph 2.1.A.6.e change “Seismic Design Category: As required by code and based on quantities of hazardous materials.” to Seismic Design Category: C”

d. Paragraph 2.2.G: Delete the word “Flat”.

9. SECTION 271513 – COMMUNICATIONS COPPER HORIZONTAL CABLING

a. Paragraph 2.4.K.5.a; delete “positioning the cord at a 45-degree angle.”

10. SECTION 312000 – EARTH MOVING

a. Paragraph 1.3 Unit Prices: Delete this paragraph in its entirety and indicate as “Not

Used.”

CHANGES TO DRAWINGS:

1. DRAWING A-601 – ROOM FINISH SCHEDULE:

a. Room 139 – Vault: Change ceiling height from 8’-0” to 8”-8”.

2. DRAWING A-603 – DOOR SCHEDULE, TYPES, AND DETAILS:

a. Doors 133B and 133D; delete door remark 1. Add door remark 2

3. DRAWING A-713 – SIGNAGE TYPES AND DETAILS:

a. Detail D1; Change the 9” font on the lower line to 8” font. Hold bottom at same elevation and adjust dimensions above accordingly.

4. DRAWING CS101 – CIVIL DEMOLITION PLAN:

a. Additional storm drain removal.

b. Sanitary sewer filled/abandoned in place.

5. DRAWING CS200 – CIVIL LAYOUT PLAN:

a. Note added regarding stormwater maintenance easements.

b. Fence alignment modifications due to sand filter design changes.

6. DRAWING CS300 – CIVIL GRADING PLAN:

a. Revised sand filter location.

b. Revised storm drain network design.

c. Note added regarding stormwater maintenance easements.

7. DRAWING CS400 – CIVIL UTILITY PLAN:

a. Revised water line.

8. DRAWING CS500 – STORMWATER PLAN:

a. Revised sand filter designs.

b. Note added regarding stormwater maintenance easements.

9. DRAWING CS600 – EROSION CONTROL PLAN:

a. Diversion ditch added.

b. Minor changes resulting from sand filter relocation/design.

10. DRAWING CS703 – SITE DETAILS:

a. Revise the flagpole in Detail C4 to be provided under ABI #9.

11. DRAWING CS711 – STORM DRAINAGE DETAILS:

a. Diversion ditch detail added.

12. DRAWING CS712 – EROSION CONTOL DETAILS:

a. Silt fence, Silt sack, and catch basin inlet protection details added.

13. DRAWING FS-1 – FOOD SERVICE EQUIPMENT SCHEDULE & LAYOUTS:

a. Schedule Item 13: Change to indicate item is “NOT USED.”

b. Schedule Item 29: Change item from Category “A” to Category “B”.

14. SHEET P-502 – AIR COMPRESSOR DETAIL:

a. Air compressor detail added.

15. SHEET P-802 – ABI No. 2 ENLARGED PLAN:

a. Revised compressed air line.

16. SHEET P-902 – DOMESTIC WATER ISOMETRICS:

a. 2nd Floor Water to restrooms detail added.

The following revised drawings are included with this Addendum:

DRAWINGS

DRAWING REV. DATE TITLE

CS101 - 06/19/17 Civil Demolition Plan CS200 1 07/18/17 Civil Layout Plan CS300 2 07/18/17 Civil Grading Plan CS400 1 07/10/17 Civil Utility Plan CS500 2 07/18/17 Stormwater Plan CS600 2 07/18/17 Erosion Control Plan CS711 1 07/18/17 Storm Drainage Details CS712 1 07/18/17 Erosion Control Details A-601 1 08/16/17 Room Finish Schedule A-603 1 08/16/17 Door Schedule, Types, And Details A-713 1 08/16/17 Signage Types and Details FS-1 1 08/16/17 Food Service Equipment Schedule & Layouts

P-502 1 08/16/17 Details P-802 1 08/16/17 Enlarged Plan – ABI No. 2 P-902 1 08/16/17 Domestic Water Isometrics

End of Amendment 0002 descriptive changes

SECTION 00010 - SOLICITATION CONTRACT FORM

The Issued By organization below has been added:

USPFONC-P&C

4201 REEDY CREEK RD

RALEIGH NC 27607-6412

The following have been modified:

SECTION 00010 NARRATIVE

TABLE OF CONTENTS

SOLICITATION, OFFER, AND AWARD SF 1442 and SF 1442 BACK

SECTION 00010 - BID SCHEDULE, NOTES

SECTION 00100 - INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS

SECTION 00600 – REPRESENTATIONS & CERTIFICATIONS

SECTION 00700 - CONTRACT CLAUSES

SECTION 00800 - SPECIAL CONTRACT REQUIREMENTS

ATTACHMENT 1 – PLANS AND SPECIFICATIONS Volume 1 and 2 Project # 85498371301 Dated 04/03/2017 (Note the plans and specifications are not attached to the solicitation and need to be downloaded from FedBizOps, reference notes 3 and 4 below)

ATTACHMENT 2 – WAGE DETERMINATION

ATTACHMENT 3- SECTION 01000 General Requirements

ATTACHMENT 4- BRAND NAME J&A

SECTION 00010 NOTES

NOTES

1. All questions and requests for information regarding this Invitation For Bids (IFB) must be received NOT LATER THAN close of business five days prior to bid date in order to minimize delays in the procurement of this project. See section 00100, #5, for details. Questions shall be emailed to: derek.t.meilinger.mil@mail.mil and to karla.m.garcia4.civ@mail.mil

2. Offeror’s attention is invited to the insurance requirement contained in this solicitation (Contract Clause FAR 52.228-5). Certification of the required coverage for the prime contractor shall be furnished prior to beginning work on this contract, and the Contracting Officer may request evidence of the required insurance at any time during the life the contract.

3. Reference Contract Clause 252.236-7008, CONTRACT PRICES – BIDDING SCHEDULES (DEC 1991).

The prices shown in the Bidding Schedule must reflect ALL costs involved in performing the work, as described in the plans and specifications.

4. The term “Bidding Schedule” shall also be construed to mean “Offer Schedule” or “Schedule”. The terms “bid” and “offer”, and “bidder” and “offeror” shall be construed as having the same meaning in this solicitation and resulting contract.

5. All information relating to this IFB, including pertinent changes/amendments and information will be posted on web site: http://www.fbo.gov.

6. Facsimile transmission of bid is not authorized.

7. All information relating to this IFB, including pertinent changes/amendments and information will be posted on web site: http://www.fbo.gov. For security reasons, all potential offerors, plan rooms and printing companies are required to be registered in the GSA System for Award Management (SAM) database. Firms can register via the SAM internet site at https://www.sam.gov/portal/public/SAM/. Interested bidders are required to submit their representations and certifications at the same site.

8. CLINS 0003 through 0012 are additive bid items. The Government will determine apparent low bidder in accordance with the procedure described in DFARS Provision 252.236-7007, Additive or Deductive Items.

9. A complete bid package must contain the following:

(a) Offer, Standard Form (SF) 1442 front and back signed

(b) Section 00010 Line Items 0001 thru 0012- all items must be priced AND Table 1 in Section 00010.

(c) A valid Bid Bond. Standard Form 24.

(d) Section 00600, Representations and Certifications, completed and return only additional certifications found in this section In addition, the offeror must have entered current and complete data within the past year in Online Representations and Certifications at www.sam.gov.

(e) When completing the “Offeror” portion of the SF 1442 (Blocks 14 – 20), an official having the authority to contractually bind the company must sign the SF 1442 in accordance with FAR 4.102.

One copy of the SF1442 is required to have an original signature.

(f) All amendments to the solicitation must be acknowledged.

(g) Mark the front of the envelope with the following: “BID No. W91242-17-B-0005”, and the Name and

Address of Bidder. See Block 13A of SF 1442 for required number of copies.

Section 00010- Table 1

Description Amount CLIN 0001- Based Bid- Wilmington Readiness Center

Site, Exterior Improvements, and Site Utilities. (this should include civil, utilities, and the "improvements" which include fencing, curbs, sidewalks etc.)

Building General Trades (to include everything that is not covered in a category below) $

Building - Fire Suppression and Alarm Systems $

Building -Plumbing $

Building - Mechanical HVAC $

Building - Electrical $

Building - Communications and Security Systems $

TOTAL CLIN 0001 Base Bid Wilmington Readiness Center $

CLIN 0002 Base Bid- Asbestos Cement Water Line $

TOTAL CLIN 0001 and CLIN 0002 $

CLIN 0003 ABI #1- Controlled Waste Handling Facility Site, Exterior Improvements, and Site Utilities. (this should include civil, utilities, and the "improvements" which include fencing, curbs, sidewalks etc.)

Building General Trades (to include everything that is not covered in a category below) $

Building -Plumbing $

Building - Mechanical HVAC $

Building - Electrical $

TOTAL CLIN 0003 $

CLIN 0004 ABI #2 General Purpose Training Bay

Site, Exterior Improvements, and Site Utilities. (this should include civil, utilities, and the "improvements" which include fencing, curbs, sidewalks etc.)

Building General Trades (to include everything that is not covered in a category below)

Building -Plumbing $

Building - Mechanical HVAC $

Building - Electrical $

TOTAL CLIN 0004 $

CLIN 0005 ABI #3 Operational Pavement Behind the Readiness Center and Access Drives

CLIN 0006 ABI #4 Ground Faced CMU $

CLIN 0007 ABI #5 Resinous Matrix Terrazzo Flooring $

CLIN 0008 ABI #6 Resinous Flooring $

CLIN 0009 ABI #7 Vehicle Loading Ramp $

CLIN 0010 ABI #8 POV Parking, Additional POV Parking, Concrete Surface MEP Parking, and site work.

CLIN 0011 ABI #9 Landscaping $

CLIN 0012 ABI #10 Basement/Foundation Demolition $

TOTAL CLIN 0001 to CLIN 0012 $

End of Section 00010

(End of Summary of Changes)