W911RQ-26-S-C001-A006 - Blast Booth 364.pdf

Federal Agency: Army Office: Army Contracting Command-Red River Army Depot (ACC-RRAD) AoI Title: Media Blast capability CSO AoI Number: W911RQ-26-S-C001-A006 AoI Release Date: 11 DEC 25 Responses: See CSO W911RQ-26-S-C001 for Procedure Details

1. General Information

1.1 Introduction

This announcement is for innovative solutions for Media Blasting Booth Area of Interest (AoI) under the ACC-RRAD Commercial Solutions Opening W911RQ-26-S-C001.

Interested parties are highly encouraged to visit the Government Point of Entry (www.sam.gov) to review the ACC-RRAD CSO special posting in its entirety to obtain more information on the process for submission evaluation of the CSO AoI Responses.

This CSO AoI seeks to solicit innovative solutions that meet the objectives detailed in Sections 1.2 and 1.3. The term innovative is defined as any technology, process, or method, including research and development that is new as of the date of proposal submission; or any new application of an existing technology, process or method as of the proposal date.

ACC-RRAD is not obligated to extend a request for proposal or make an award as a result of this CSO AoI; all awards are subject to the availability of funds and successful negotiations. This CSO AoI is not an authorization to begin performance, and in no way obligates the Government for any costs incurred by the Offeror associated with developing a Response. Prior to commencement of any activities associated with performance under this CSO AoI, the Government will issue a written directive or contractual document signed by the Contracting Officer with appropriate consideration established. ACC-RRAD reserves the right to modify the requirements of this CSO AoI.

The authority to issue this CSO AoI is derived from ACC-RRAD Commercial Solutions Opening W911RQ-26-S-C001, dated 01 OCT 2025. The CSO authority is DoD Class Deviation 2022-O0007.

1.2 AoI Background

The RRAD Directorate of Maintenance currently possesses a blast booth located in building 364;

however, this booth is not operational at present due to the malfunctioning Clemco recovery system. This system has been unable to consistently recover, and cycle spent blasting media back into the primary storage hoppers and tanks for reuse. As a direct consequence, we experience frequent system halts that necessitate manual media replenishment. This not only leads to significant operational inefficiencies but also results in excessive labor time spent clearing the floor of spent media. Furthermore, the inability to effectively reclaim and recycle media contributes to unnecessary waste, which impacts our overall productivity and increases operational costs. Addressing these challenges is critical to enhancing our maintenance capabilities and ensuring the effective utilization of resources.

1.3 Media Blasting Capabilities

Considering these operational challenges, RRAD is keenly interested in upgrading the existing blast booth structure by installing an auger and elevator system. This enhancement aims to significantly improve the media reclamation process by restoring automated media recycling capabilities. By implementing this upgrade, we anticipate a substantial reduction in operational downtime, allowing for more continuous and efficient blasting operations. Additionally, this modernization will minimize the manual labor currently required for media recovery, thereby reallocating valuable personnel resources to other critical tasks. Our goal is to create a streamlined, automated system that not only enhances productivity but also aligns with our commitment to operational excellence and resource sustainability. RRAD is seeking a turnkey installment for this AoI.

2. AoI Constraints

1. Any selected company/companies will be required to be registered in the System for Award Maintenance (sam.gov).

3. Submission Requirements

A written solution must be sent via e-mail submission by 5:00 P.M. (CDT) on 19 FEB 2026, with subject line stating INNOVATIVE SOLUTION to usarmy.rrad.acc.mbx.cso@army.mil

Solutions received after the specified due date and time will be discarded and not be evaluated by the Government.

AoI Open Period – This AoI shall close at 5:00 P.M (CDT); 19 FEB 2026.

Point of contacts:

AoI questions can be sent to:

Contracting Officer: christopher.l.johnston20.civ@army.mil

CSO AoI POC: jacob.j.horn.civ@army.mil