20_ITEM 01.3-10_ADD 03_02700A-002.pdf
PDF 224 KB Posted
- Attached to
- F-35 THREE BAY SPECIALIZED HANGAR Federal contract opportunity
- Solicitation number
- W50S9F-22-B-0001
- Issued by
- Department of the Army National Guard
About this file
This solicitation is an invitation for bids for the construction of an F-35 three-bay specialized hangar at Dane County Regional Airport - Truax Field in Madison, Wisconsin. The scope of work includes demolishing an existing building and constructing a new 31,000 square foot hangar with three bays to support F-35 operations, including fuel cell, wash, surface coating, and weapons load training capabilities. The facility will also include administrative and shop spaces, as well as areas for a future paint booth and composite shop. Additional requirements include hangar bay HVAC, aircraft power and fire suppression systems, lighting protection, and an Advantor security system. The base bid is for the construction with two option items for a paint/mix addition and aircraft-rated pavement. The contract duration is 550 days with a bid opening to take place following a pre-bid conference and site visit. Interested contractors must be registered in SAM.gov and bids must be submitted through the SAM.gov website. The estimated value of construction is between $25-100 million.
View the file
Other files for this federal contract opportunity
Show all 50
F-35 THREE BAY SPECIALIZED HANGAR has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PARTITION TYPE NOTES
A. STUD GAUGE IN PARTITION SCHEDULE IS A
MINIMUM.
B. STUD SPACING IN PARTITION SCHEDULE IS
MAXIMUM.
C. ALL GYPSUM BOARD SHALL BE 5/8" TYPE 'X' UNLESS
NOTED OTHERWISE OR REQUIRED FOR ACOUSTIC
ASSEMBLY.
D. PROVIDE CONTINUOUS 20 GAUGE DEFLECTION
TRACK (2 1/2" DEEP LEG TRACK) AND 20 GAUGE
UPPER HORIZONTAL SPACER BARS AT ALL
INTERIOR PARTITIONS EXTENDED TO DECK.
E. SUBSTITUTE 5/8" TYPE 'X' FIRE RESISTANT TILE
BACK BOARD AT ALL LOCATIONS SCHEDULED TO
RECEIVE WALL TILE.
F. ALL GYPSUM WALL BOARD SHALL BE CUT TIGHT TO
FIT AND SEALED COMPLETELY AIRTIGHT WITH
REQUIRED SEALANT FOR EITHER FIRE RATING OR
SOUND ATTENUATION AT ALL MEP PENETRATIONS
THRU INTERIOR PARTITIONS SCHEDULED TO DECK.
G. FILL ALL PERIMETER VOIDS AND HEAD OF WALL
METAL DECK FLUTES WITH FIRESAFING INSULATION
AT ALL FIRE RATED WALLS TO ACHIEVE COMPLETE
CLOSURE AND SEAL BOTH SIDES WITH ELASTIC
FIRESTOPPING SPRAY MASTIC.
H. ALL SOUND ATTENUATION BATTS SHALL BE
UNFACED, 2.5 PCF, INSTALLED CONTINUOUS
VERTICALLY, CUT TIGHT TO FIT AND FILL THE STUD
CAVITY.
I. PROVIDE MOISTURE RESISTANT GYPSUM BOARD AT
THE FOLLOWING LOCATIONS:
a. MECHANICAL ROOMS
b. PLUMBING WET WALLS AT JANITOR ROOMS AND
RESTROOMS
c. LOADING DOCK AND RELATED CORRIDOR
J. PROVIDE IMPACT RESISTANT GYPSUM BOARD AT
ALL CORRIDOR WALLS, UP TO 8'-0" AFF.
K. 'S' IN PARTITION SCHEDULE INDICATES SOUND
BATTS ARE TO BE PROVIDED BUT A MINIMUM STC IS
NOT SPECIFIED.
L. THE TERM "TO DECK" IN THE PARTITION SCHEDULE
REFERS TO THE ENTIRE WALL ASSEMBLY
CONTINUING TO THE DECK ABOVE. WHEN THIS IS
MARKED "NO" THEN THE WALL IS TO STOP 6" ABOVE
THE CEILING UNLESS NOTED OTHERWISE. OTHER
HEAD OF WALL CONDITIONS WILL BE NOTED IN THE
PARTITION SCHEDULE - TYPE COMMENTS OR ON
THE PLANS.
M. THE ASSEMBLY CODES IN THE TYPE COMMENTS
ARE USED AS A BASIS OF DESIGN AND NOT THE
ONLY METHOD OF ACHIEVING THE DESIRED
PERFORMANCE CRITERIA OF A WALL ASSEMBLY.
"A" SERIES - ACOUSTIC PARTITION
STC IS A PRIORITY. MAY OR MAY NOT NEED FIRE
RATING.
"B" SERIES - SCIF WALL
STC IS A PRIORITY. MAY OR MAY NOT NEED FIRE
RATING.
"C" SERIES - CHASE
"D" SERIES - DOUBLE STUD
STC OR WRAPPING AN ITEM IS PRIORITY. MAY OR
MAY NOT NEED FIRE RATING.
"F" SERIES - FURRING
"G" SERIES - GENERIC
"H" SERIES - HAT CHANNEL
"I" SERIES - INTERIOR PARTITION
NO FIRE RATING, NO STC RATING.
"M" SERIES - MASONRY - FIRE RATED
FIRE RATING IS PRIORITY. MAY OR MAY NOT NEED
STC.
"N" SERIES - MASONRY - NOT RATED
NO FIRE RATING. MAY OR MAY NOT NEED STC.
"P" SERIES - PARTIAL HEIGHT
NO FIRE RATING, NO STC RATING.
"R" SERIES - RATED INTERIOR PARTITION
"S" SERIES - SHAFT WALL
"U" SERIES - USER DEFINED
CREATE UNIQUE WALLS AS NEEDED.
"V" SERIES - VAULT WALL
TYPICALLY FOR CASINOS
"W" SERIES - FIRE WALL / AREA SEPARATION
PROTECTED ON BOTH SIDES OF AN EXPANSION
JOINT WHEN DOUBLE STUD.
"Z" SERIES - SOUND PARTITION WITH Z-CLIPS
STC IS A PRIORITY. MAY OR MAY NOT NEED FIRE
RATING.
WALL SERIES LEGEND
STANDARD PARTITION
BATT INSULATION
1-HOUR FIRE RATING
2-HOUR FIRE RATING
3-HOUR FIRE RATING
4-HOURS FIRE RATING
1-HOUR FIRE/SMOKE
CONCRETE MASONRY UNIT - HOLLOW
CONCRETE MASONRY UNIT - GROUT FILLED
CONCRETE MASONRY UNIT - SAND FILLED
DOUBLE STUD PARTITION
PARTITION TYPES LEGEND
A1*
"*" DENOTES WALL IS
TO DECK ABOVE
DENOTES GENERIC
SIZE OF STRUCTURAL
ELEMENT
WALL SERIES. SEE
LEGEND ON THIS
SHEET
1 HR. RATED PARTITION WITH 8" CMU
IBC TABLE 720.1, MATERIAL 3
2 HR. RATED PARTITION WITH 8" CMU
IBC TABLE 720.1, MATERIAL 3
1 HR. RATED PARTITION WITH 12" CMU
IBC TABLE 720.1, MATERIAL 3
A3
NON-RATED PARTITION AS SHOWN ABOVE
WITH UNFACED ACOUSTICAL BATTS AND
EXTENDING GYPSUM BOARD TO DECK
FINISH
FLOOR
5/8" GYP BD
SCHEDULED CLG
STEEL RUNNER
CHANNEL
1-5/8" STUDS
AT 16" OC
NON-RATED FURRING
PARTITION
C1
C6
NON-RATED FURRING
PARTITION WITH 6" STUDS AND
UNFACED ACOUSTICAL BATTS IN
LIEU OF 1-5/8" STUDS
CMU WALL
5/8" GYP BD
(BOTH SIDES)
FINISH
FLOOR
DECK
SLOTTED
DEFL TRACK
SCHEDULED CLG
STEEL RUNNER
CHANNEL
6" M
IN
BASE AS
SCHEDULED
BASE AS
SCHEDULED
3-5/8" STUDS
AT 16" OC
M8
M8A
M12A
STEEL
RUNNER
CHANNEL
A6
NON-RATED PARTITION AS SHOWN
ABOVE WITH 6" STUDS IN LIEU OF
3-5/8" STUDS
FINISH
FLOOR
DECK
SCHEDULED CLG
8" CMU
PROVIDE UL ASSEMBLY
HW-D-0042 TO DECK
BASE AS
SCHEDULED
6" M
IN
FINISHED FLOOR
FINISH
FLOOR
5/8" GYP BD
SCHEDULED CLG
STEEL RUNNER
CHANNEL
1-5/8" STUDS
AT 16" OC
NON-RATED FURRING
PARTITION
F1
F2
NON-RATED FURRING
PARTITION WITH 2-1/2" STUDS IN
LIEU OF 1-5/8" STUDS
6" M
IN
BASE AS
SCHEDULED
STEEL
RUNNER
CHANNEL
F3
NON-RATED FURRING
PARTITION WITH 3-5/8" STUDS IN
LIEU OF 1-5/8" STUDS
F6
NON-RATED FURRING
PARTITION WITH 6" STUDS IN
LIEU OF 1-5/8" STUDS
I3 NON-RATED PARTITION AS SHOWN ABOVE
5/8" GYP BD
(BOTH SIDES)
FINISH
FLOOR
DECK
SLOTTED
DEFL TRACK
SCHEDULED CLG
STEEL RUNNER
CHANNEL
BASE AS
SCHEDULED
3-5/8" STUDS
AT 16" OC
I6
NON-RATED PARTITION AS SHOWN
ABOVE WITH 6" STUDS IN LIEU OF
3-5/8" STUDS
6" M
IN
FINISHED FLOOR
NON RATED PARTITION WITH 8" CMU
IBC TABLE 720.1, MATERIAL 3
N8
FINISH
FLOOR
DECK
SCHEDULED CLG
8" CMU
PROVIDE UL ASSEMBLY
HW-D-0042 TO DECK
BASE AS
SCHEDULED
8" CMU
2HR RATED PARTITION WITH 8" CMU
IBC TABLE 720.1, MATERIAL 3 UP TO
11' - 4" AFF WITH 6" CH STUD ON TOP
WITH 2 LAYERS OF GYP BD ON
HANGAR SIDE
S6
FINISH
FLOOR
DECK
8" CMU
PROVIDE UL ASSEMBLY
HW-D-0042 TO DECK
BASE AS
SCHEDULED
SLOTTED
DEFLECTION
TRACK
FIRE SEALANT
5/8" GYP BD
(2 LAYERS)
1" SHAFT
LINER
6" CH STUD
10' - 0" AFF
T.O. CMU
REF STRUCTURAL
FOR DISTANCE
BELOW FINISH FLOOR
5/8" GYP BD
(BOTH SIDES)
FINISH
FLOOR
DECK
SLOTTED
DEFL TRACK
SCHEDULED CLG
STEEL RUNNER
CHANNEL
BASE AS
SCHEDULED
6" STUDS AT
16" OC
Z6
1HR RATED PARTITION WITH 6" CH
STUD, 1/2" RESILIENT CHANNEL,
5/8" ACOUSTIC GYP BD ON BOTH
SIDES - 1HR W/BATTS.
6" BATT
INSULATION
PROVIDE UL ASSEMBLY
HW-D-0042 TO DECK
5801 Broadway Extension, Suite 500 Oklahoma City, OK 73118-7436
405.840.2931 | fsb-ae.com
D
SHEET NUMBER:
ISSUE DATE:
SHEET TITLE:
PROJECT NUMBER:
PROJECT INFORMATION:
REVISION HISTORY:
FSB2020-270-00
DATEDESCRIPTION
REVIEWED BY:
DRAWN BY:
DESIGNED BY:
PROJECT MANAGER:
NWC / JBC
F-
3- Ba y S pe cia liz ed H an ga r M ad iso n, W isc on sin
Ai r N at io na l G ua rd
C
B
A
D
C
B
A
54321
DECEMBER 23, 2021
C :\U sers\w fj\ D ocum e nts\0270 0_Arch_ W
Jim en ezKN
JQ
U
.rvt
6/14 /2022 5: 09:05 PM
PARTITION TYPES
A-002
JBC
JRT/JBC
MP
INTERIOR PARTITION SCHEDULE
MARK
FIRE
RATING UL NO.
WALL
STC
SOUND
BATTS TYPE
TO
DECK
STUD
GAUGE
STUD
SPACING TYPE COMMENTS
A3 -- -- 45 Yes (A3) 3 5/8" STUDS, 5/8" ACOUSTIC GYP BD BOTH SIDES-0HR W/BATTS Yes 20 GA 16" OC NGC 2013005 A6 -- -- 45 Yes (A6) 6" STUDS, 5/8" GYP BD BOTH SIDES-0HR W/BATTS No 20 GA 16" OC NGC 2013023 C1 -- -- -- No (C1) 1 5/8" STUDS, 5/8" GYP BD ONE SIDE-0HR No 20 GA 16" OC -- C6 -- -- 55 Yes (C6) 6" STUDS, 5/8" GYP BD ONE SIDE-0HR W/BATTS Yes 20 GA 16" OC NGC 2013021 F1 -- -- -- No (F1) 1 5/8" STUDS, 5/8" GYP BD ONE SIDE-0HR No 20 GA 16" OC -- F2 -- -- -- No (F2) 2 1/2" STUDS, 5/8" GYP BD ONE SIDE-0HR No 20 GA 16" OC -- F3 -- -- -- No (F3) 3 5/8" STUDS, 5/8" GYP BD ONE SIDE-0HR No 20 GA 16" OC -- F6 -- -- -- No (F6) 6" STUDS, 5/8" GYP BD ONE SIDE-0HR No 20 GA 16" OC -- I3 -- -- -- No (I3) 3 5/8" STUDS, 5/8" GYP BD BOTH SIDES-0HR No 20 GA 16" OC -- I6 -- -- -- No (I6) 6" STUDS, 5/8" GYP BD BOTH SIDES-0HR Yes 20 GA 16" OC --
M8 1 U906 -- No (M8) 8" CMU BLOCK-1HR Yes -- -- -- M12C 1 U906 -- No (M12) 12" CMU BLOCK-1HR Yes -- -- --
N8 -- -- 55 No (N8) 8" CMU BLOCK, GROUT FILLED-0HR Yes -- -- GROUT FILLED S6 2 Yes
SCALE: NTS
PARTITION TAG LEGENDD1
SCALE: 1 1/2" = 1'-0"
Partition1
1 ADDENDUM 3 06/14/2022
W
IS C O NS IN
A R C H I T E C T
JASON T.
HOLUBY
A-13101
OKLAHOMA CITY
OK
| Sheets |
| A-002 - PARTITION TYPES |
| A-103 - PARTIAL FLOOR PLAN - SECTOR ONE |
| A-104 - PARTIAL FLOOR PLAN - SECTOR TWO |
| A-306 - WALL SECTIONS |
| A-307 - WALL SECTIONS |
| A-500 - DETAILS |
| A-501 - DETAILS |
| A-505 - PLAN DETAILS |
| A-510 - ISOMETRIC EXPANSION JOINT |
| A-511 - ISOMETRIC EXPANSION JOINT |
| A-600 - DOOR SCHEDULE |
| A-601 - WINDOW ELEVATIONS |
| A-602 - ROOM FINISH SCHEDULE & FINISH MATERIALS SCHEDULE |
| A-701 - COMPOSITE FLOOR PLAN, ROOF PLAN, ELEVATIONS, WALL SECTION & DETAILS - BID OPTION 1 |
| A-702 - FLOOR FINISH PLAN, ROOM FINISH SCHEDULE- BID OPTION 1 |
| G-002 - SHEET INDEX |
File details come from the government source that posted it. Updated .