Hipcan_Length_MITR.pdf
PDF 38 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is a technical drawing specification for a mitered plate component, part number C61T01V0, designated as a "HIP CAN" product. The document provides detailed engineering specifications for manufacturing a sheet metal part fabricated from 18-gauge material with specific dimensional requirements including an inner length of 40.125±0.020 inches, inner width of 6.10±0.02 inches, and various radii specifications (R1.50, R.125, R.20). The part features rounded edges with a maximum draft angle of 2 percent and requires a surface finish of 63 RMS microinches.
The manufacturing and finishing requirements include: application of Neolube 1.1 coating to all surfaces per manufacturer's instructions followed by baking; individual vacuum sealing in 5-mil Mylar bags; labeling each sealed bag with part and serial numbers using 1 x 3 harsh environment thermal transfer labels; and electrochemical etching or laser engraving with SAP number, lot number, and serial number (format: 10-digit SAP-5-digit lot-8-digit serial) at 0.13 inches high and no deeper than 0.002 inches. Standard inch tolerances apply with specified precision levels (.0 = ±.1, .00 = ±.01, .000 and .0000 = ±.005). The drawing was created by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason on 08/06/2026.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.125±.020 2x 1.125
6.10±.02
R1.50
BB
APPLY NEOLUBE TO
INNER SURFACE ONLY
NON-PART NUMBER SIDE.
0.06
40.125±.020
18 GAUGE
R.125 R.20
.99
D
SECTION B-B
DETAIL D
SCALE 2 : 1
MAX DRAFT ANGLE: 2%
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS
PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD PART NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL NUMBER
(XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
INNER LENGTH
INNER WIDTH
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 2 OF 2SCALE: 1:4
XX.XX lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXXC61T01V0
WEIGHT:
MITR PLATE
HIP CAN
08/06/2026
08/05/2026
A A
B B
| Sheet1 |
| Bottom View |
| Drawing View10 |
| Section View B-B |
| Detail View D (2 : 1) |
File details come from the government source that posted it. Updated .