Hip Can Lid_MITR.pdf
PDF 55 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is a technical engineering drawing for a manufactured metal part titled "MITR PLATE" (also referenced as "HIP CAN LID"). The part is fabricated from 18-gauge material using third-angle projection, with overall dimensions of 42.125 inches in length and 8.10 inches in width. The drawing specifies standard tolerance requirements including angular tolerances of ±0.5 degrees, length tolerances varying by decimal places (±0.1 for .0, ±0.01 for .00, ±0.005 for .000 and .0000), and a surface finish of 63 RMS microinches with all sharp edges broken.
The drawing includes four critical manufacturing and finishing requirements: application of NEOLUBE 1.1 spray coating on all surfaces per manufacturer specifications followed by baking; individual vacuum sealing of completed parts in 5-mil Mylar bags or buyer-approved equivalent; labeling each sealed bag with SAP number and serial number using a 1 x 3 harsh environment thermal transfer label; and electrochemical etching or laser engraving with part identification in the format of 10-digit SAP number, 5-digit lot number, and 8-digit serial number (0.13 inches high, maximum 0.002 inches deep). The part number is C62T01V0, with revision 0 dated 08/06/2026. Documentation was prepared by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
8.10
42.125
18 GAUGE
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
C62T01V0
A A
B B
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:8
XX.XX lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
MITR PLATE
HIP CAN LID
08/06/2026
06/09/2026
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
File details come from the government source that posted it. Updated .