0.019 Thick Foil_MITR.pdf
PDF 56 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is a technical engineering drawing for a mitr plate component. The part is manufactured from U-10Mo core material with a 0.001" zirconium coating and measures 0.019" thick foil. The plate dimensions are 22.375±.005 inches in length and 2.082±.040 inches in width, with a weight of 1.06 lb. The drawing specifies standard tolerances for inches-based measurements and requires breaking all sharp edges with a surface finish of 63 RMS microinches.
The document outlines four key manufacturing and packaging requirements: parts must be individually vacuum sealed in 5mil mylar bags or buyer-approved equivalent; SAP number and serial number must be added to each sealed bag using a 1x3 harsh environment thermal transfer label; parts must be electrochemically etched or laser engraved with SAP number, lot number, and serial number in 0.13" high characters at no more than 0.002" depth using the format of 10-digit SAP number, 5-digit lot number, and 8-digit serial number; and all sharp edges must be broken. The drawing was prepared by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason, with revision 0 dated August 6, 2026.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
.027±.001
22.375±.005
2.082±.040
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT
SERIAL NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
MITR PLATE
0.019" THICK - FOIL
A22T01V0
A A
B B
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:4
1.06 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
07/20/2026
U-10Mo CORE 0.001" Zr COAT
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
File details come from the government source that posted it. Updated .