0.002in-Shim_MITR.pdf
PDF 57 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is a technical engineering drawing for a mitred plate shim component. The part is manufactured from 1018 steel and weighs 0.14 pounds, with dimensions of 40.095±.005 inches in length and 6.07±.005 inches in width, featuring four rounded corners with a 1.49-inch radius and a 0.002-inch reference thickness. The drawing specifies standard tolerances for all dimensions in inches and requires a surface finish of 63 RMS microinches with all sharp edges broken.
The document outlines four critical manufacturing and packaging requirements: (1) spray all surfaces with Neolube 1.1 lubricant per manufacturer specifications and bake accordingly; (2) individually vacuum seal each part in 5-mil Mylar bags or buyer-approved equivalent; (3) apply a 1x3 harsh environment thermal transfer label to each sealed bag containing the SAP number and serial number; and (4) electrochemically etch or laser engrave each part with the SAP number, lot number, and serial number in 0.13-inch-high characters with a maximum depth of 0.002 inches, following the format XXXXXXXXXX-XXXXX-XXXXXXXX. The drawing was prepared by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason, with a revision date of August 6, 2026.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
6.07±.005
4x R1.49
.0020 REF
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT
SERIAL NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
0.002" THICKNESS - SHIM
MITR PLATE
C67T03V0
A A
B B
1018 Steel
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
0.14 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
06/11/2026
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
File details come from the government source that posted it. Updated .