18gauge_MITR.pdf
PDF 56 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is a technical engineering drawing for an 18 gauge steel mitre plate component (Part Number C64T01V0) manufactured from ASTM A1008 material. The part measures 40.095 inches (±0.005) in length by 6.07 inches (±0.02) in width, features four rounded corners with a 1.49-inch radius, and weighs 3.28 pounds. Standard tolerances apply with angular tolerances of ±0.5 degrees and surface finish requirements of 63 RMS microinches. All sharp edges must be broken per standard specifications.
Manufacturing and finishing requirements include spraying all surfaces with Neolube 1.1 lubricant per manufacturer's directions followed by baking, individually vacuum sealing each part in 5-mil mylar bags with buyer approval for alternative materials, and marking each sealed bag with a 1 by 3 harsh environment thermal transfer label containing SAP and serial numbers. Parts must be electrochemically etched or laser engraved with identification markings (10-digit SAP number, 5-digit lot number, and 8-digit serial number) at 0.13 inches high and no deeper than 0.002 inches, with buyer approval permitted for alternative marking methods. The drawing was created by Fiona Gailey, reviewed by Dustin Clelland, approved by Taylor Mason, with a revision date of August 6, 2026.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
6.07±.02
4x R1.49
18 GAUGE
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
18 GAUGE - STRONG BACK
MITR PLATE
C64T01V0
A A
B B
ASTM A1008
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
3.28 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
06/09/2026
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
File details come from the government source that posted it. Updated .