0.0085 Pocket Depth-cladding_MITR (2).pdf
PDF 63 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This document is an engineering drawing for a precision-manufactured part called a "Mitr Plate" (SAP Number C66T03V0). The part is manufactured from 6061 aluminum alloy and weighs 0.90 pounds. The drawing specifies third-angle projection and provides detailed dimensional specifications with tight tolerances, including an overall length of 40.095±.005 inches, width of 2.25±.005 inches, and height of 6.07±.005 inches, with four rounded corners of R1.49 and a pocket depth of 0.0085 inches for cladding. The material is 18-gauge aluminum, and standard tolerances are specified as ±0.1 inches for single decimals, ±0.01 for two decimals, and ±0.005 for three or more decimals.
The drawing includes detailed manufacturing and packaging requirements. Parts must be individually vacuum sealed in 5-mil Mylar bags with buyer approval, and each sealed bag must include a thermal transfer label containing the SAP number and serial number. Parts must be electrochemically etched or laser engraved with the SAP number, lot number, and 8-digit serial number in a specific format (XXXXXXXXXX-XXXXX-XXXXXXXX) at 0.13 inches high with depth not exceeding 0.002 inches. Final processing requires rinsing with deionized water to remove chips and contaminants, followed by wiping with denatured alcohol. The drawing was created by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason, with an initial date of July 20, 2026, and revision date of August 6, 2026.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
2.25±.005 6.07±.005
22.387±.005 4x R1.49
18 GAUGE
A
.0085
R.002
DETAIL A
SCALE 5 : 1
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
5. RINSE WITH DEIONIZED WATER TO REMOVE CHIPS AND OTHER CONTAMINANTS, FOLLOWED BY A WIPE WITH
DENATURED ALCOHOL
0.0085" POCKET DEPTH - CLADDING
MITR PLATE
C66T03V0
A A
B B
6061 Alloy
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
0.90 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
07/20/2026
| Sheet1 |
| Top |
| Front |
| Detail View A (5 : 1) |
| Drawing View5 |
File details come from the government source that posted it. Updated .