0.005in-Shim_MITR.pdf
PDF 56 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is a technical engineering drawing for a mitral plate shim component manufactured from 1018 steel. The part is a rectangular shim with dimensions of 40.095±.005 inches in length and 6.07±.005 inches in width, featuring four rounded corners with a radius of 1.49 inches and a thickness of 0.005 inches. The component weighs 0.34 pounds and is identified by part number C67T02V0 with an associated SAP number field.
The drawing specifies comprehensive manufacturing and quality requirements including surface finish of 63 RMS microinches, standard tolerances for angular measurements (±0.5 degrees) and dimensional precision, and mandatory processing steps. All parts must be sprayed with NEOLUBE 1.1 lubricant on all surfaces per manufacturer's directions and baked accordingly. Parts must be individually vacuum sealed in 5-mil mylar bags with thermal transfer labels containing SAP and serial numbers. Each part requires electrochemical etching or laser engraving with the SAP number, lot number, and serial number in a specified format (10-digit SAP-5-digit lot-8-digit serial) at 0.13 inches high and no more than 0.002 inches deep. All sharp edges must be broken per standard practice. The drawing was prepared by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason, with dates of 06/11/2026 and 08/06/2026.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
6.07±.005
4x R1.49
.0050 REF
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT
SERIAL NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
0.005" THICKNESS - SHIM
MITR PLATE
C67T02V0
A A
B B
1018 Steel
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
0.34 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
06/11/2026
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View4 |
File details come from the government source that posted it. Updated .