0.027 Thick Foil_MITR.pdf
PDF 55 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is an engineering drawing for a MITR Plate component. The part is a 0.027-inch thick foil plate constructed from U-10Mo core material with a 0.001-inch zirconium coating. The plate measures 22.375±0.005 inches in length and 2.082±0.040 inches in width, with a thickness tolerance of 0.027±0.001 inches and weighs 1.06 pounds. The drawing specifies third-angle projection and standard inch-based tolerances with a surface finish of 63 RMS microinches.
The drawing includes detailed packaging and identification requirements. Parts must be individually vacuum sealed in 5-mil Mylar bags or buyer-approved equivalent, with SAP and serial numbers applied to each sealed bag using a 1-by-3-inch harsh environment thermal transfer label. Parts must be marked with electrochemically etched or laser-engraved identification containing the 10-digit SAP number, 5-digit lot number, and 8-digit serial number in the format XXXXXXXXXX-XXXXX-XXXXXXXX, engraved 0.13 inches high and no deeper than 0.002 inches. All sharp edges must be broken. The drawing was prepared by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason, with revision 0 dated August 6, 2026.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
.027±.001
22.375±.005
2.082±.040
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT
SERIAL NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
MITR PLATE
0.027" THICK - FOIL
A21T01V0
A A
B B
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:4
1.06 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
07/20/2026
U-10Mo CORE 0.001" Zr COAT
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
File details come from the government source that posted it. Updated .