10Gatop_MITR.pdf
PDF 56 KB Posted
- Attached to
- HIP CAN Study
- Solicitation number
- 0000963801
- Issued by
-
Department of Energy
About this file
This is an engineering drawing specification for a mitr plate component. The part is a 10 gauge steel top strongback plate manufactured from ASTM A1008 material, weighing 9.23 pounds. The plate measures 40.095±.005 inches in length by 6.07±.005 inches in width with four radius corners of R1.49 inches. Standard tolerances apply with angular tolerances of ±0.5 degrees and a surface finish of 63 RMS microinches.
The specification includes four critical manufacturing and processing requirements: application of Spray Neolube 1.1 lubricant on all surfaces per manufacturer's directions followed by baking; individual vacuum sealing of parts in 5-mil mylar bags or buyer-approved equivalent; labeling each sealed bag with SAP number and serial number using a 1x3 harsh environment thermal transfer label; and electrochemical etching or laser engraving with SAP number, lot, and serial number (format: 10-digit SAP-5-digit lot-8-digit serial) at 0.13 inches high and no more than 0.002 inches deep. All sharp edges must be broken. The drawing was created on 08/06/2026 and reviewed on 06/09/2026, with approval by Taylor Mason and review by Dustin Clelland. The SAP number field is marked as XXXXX on the document.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
6.07±.005
4x R1.49
10 GAUGE
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
10 GAUGE TOP - STRONG BACK
MITR PLATE
C65T01V0
A A
B B
ASTM A1008
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
9.23 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
06/09/2026
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View5 |
File details come from the government source that posted it. Updated .