DI-MISC-81832_CPP.pdf
PDF 41 KB Posted
- Solicitation number
- FA825026Q0398
About this file
This is a Data Item Description (DID) that establishes the format and content requirements for a Counterfeit Prevention Plan under federal contract DI-MISC-81832, approved January 21, 2011, and administered by the National Reconnaissance Office (NRO). The plan will be used by procurement activities to evaluate contractor effectiveness in counterfeit protection and determine award fee eligibility. The plan must be submitted in contractor format and address procurement practices ensuring all parts and materials are obtained from original equipment manufacturers (OEM) or authorized distributors, with documented procedures for exceptions when items are no longer available, including qualification processes for non-OEM parts. Additionally, contractors must establish monitoring procedures incorporating random sampling and supply chain surveillance without assuming any source is inherently safe, implement a training and certification program for receiving inspectors, develop processes to verify and identify counterfeit parts, and conduct self-audits of internal processes.
Contractors must also ensure subcontracts contain equivalent counterfeit prevention requirements and establish a six-step notification procedure for suspect items: quarantining suspected products with detailed problem descriptions, immediately notifying customers up the supply chain to the prime contractor who notifies the Contracting Officer and Technical Representative, securing original documentation as evidence including part information and procurement traceability records, determining whether parts are counterfeit through root cause analysis, isolating confirmed counterfeits pending law enforcement direction, and providing additional information to the government's investigation team. The plan shall be updated as counterfeiting methods evolve and is related to the Parts, Materials and Processes Selection List and "As Designed" and "As Built" Parts Lists.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SSJ_Redacted.pdf | ||
| ITEM_UNIQUE_ID.pdf | ||
| DI-MGMT-81838_A001.pdf | ||
| Solicitation Provisions and Clauses.pdf | ||
| DI-MGMT-80441_A003_Government_Property_Inventory_Report.pdf | ||
| DI-PSSS-81995A_A002_CDM_Production_Report.pdf | ||
| CONTRACT_DATA_REQUIREMENTS_LIST.pdf | ||
| FA825026Q0398.pdf | ||
| PACKAGING_STATEMENT_OF_WORK.pdf | ||
| DI-PSSS-80386A_RIIR.pdf | ||
| TRANSPORTATION.pdf | ||
| CAVAF_REPORTING_REQUIREMENTS.docx | DOCX document | |
| ITEM_DESCRIPTION.pdf | ||
| PACKAGING_REQUIREMENT.pdf | ||
| REPAIR_DATA_LIST.pdf | ||
| DI-SESS-80639E_ECP.pdf | ||
| PERFORMANCE_WORK_STATEMENT.docx | DOCX document |
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
TITLE: COUNTERFEIT PREVENTION PLAN
Number: DI-MISC-81832 Approval Date: 20110121 AMSC Number: 9181 Limitation:
DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NRO Applicable Forms: N/A
Use/Relationship: The Counterfeit Prevention Plan will be used by the procurement activity to determine and evaluate the effectiveness of the contractor’s counterfeit protection plan and award fee.
a. This Data Item Description contains the format and content preparation instructions for the data product generated by the specific and discrete task requirements delineated in the statement of work.
b. This DID is related to Parts, Materials and Processes Selection List (PMPSL).
c. This DID is related to “As Designed” and “As Built” Parts List.
d. The Counterfeit Prevention Plan will be updated as counterfeiting methods evolve to include any new indicators, as well as new prevention processes needed (either discovered directly or provided by the Government).
Requirements:
1. The Counterfeit Prevention Plan shall be in contractor format and shall include the following, as a minimum:
a. Procurement practices and procedures to include procurement of all parts and materials from original qualified parts/materials equipment manufacturer (OEM) or it franchised/authorized distributor.
b. Procurement practices and internal processes used for exceptions to buying from
OEM or OEM franchised distributors in cases where items are no longer available including a process to qualify/certify non-OEM parts & materials.
c. Monitoring procedures to include the delivery of test results from random sampling and supply chains surveillance that does not assume any source is safe to identify possible penetration of OEM supply chain.
d. Training/certification program for receiving inspectors.
e. Process to verify counterfeit.
Source: http://assist.dla.mil -- Downloaded: 2023-06-30T17:24Z Check the source to verify that this is the current version before use.
DI-MISC-81832
- 2 -
f. Processes to identify, store, and report counterfeit parts.
g. Process to ensure subcontracts contain the following requirements (As a minimum):
(1) Requirements to procure only from Original Equipment Manufacturer
(OEM) or OEM franchised distributors
(2) Procurement practices and internal processes used for exceptions to buying from OEM or OEM franchised distributors including a process to qualify/certify non-OEM parts & materials obtained
(3) Requirements to monitor supply (including delivery of test results from random sampling and supply chain surveillance that does not assume any source is safe) to identify possible penetration of OEM supply chain
(4) Training/certification program for receiving inspectors
(5) Process to verify counterfeit
(6) Processes to identify, store, and report counterfeit parts.
(7) Notification procedure (tailored to specific sub-contractor based on following Notification Procedure)
h. Self-audit of internal processes.
i. Monitor processes at all subcontractor levels processes and verify compliance through on-site audits.
j. Notification Procedure:
(1) Step 1: The contractor shall quarantine all suspect products pending further direction. The contractor shall provide a statement, with problem description, justifying why this is considered suspect and how it was detected. The contractor shall NOT notify the supplier that the items are suspected as being counterfeit items. However, consultation with the OEM is authorized. Make certain the parts and all members of the lot procured for use on this contract are stored in correct environmental controls. These parts need to be protected as evidence.
(2) Step 2: Contractors that identify suspect items shall immediately notify their customer that is the next link toward the prime contractor.
Notification shall be passed up the customer chain until reaching the prime contractor. The prime contractor shall immediately notify the cognizant Contracting Officer (CO) and Contracting Office Technical Representative (COTR) of all suspect items identified.
DI-MISC-81832
- 3 -
(3) Step 3: The contractor shall make certain that the original documentation is secured as evidence and maintain any and all documentation associated with the part to include:
a. Part information such as part identifying number, lot date code, manufacturer information and originator/point of contact information
b. Any information reflecting part procurement/acquisition traceability which should include a copy of the purchase order, any and all correspondence between the buyer and the supplier to include: e-mails, records of phone conversations and paper letters of correspondence
c. Part documentation from the purported original manufacturer, distributors and suppliers (certificate of compliance and certificate of conformance)
d. All visual examination and physical analysis/testing results and the technical data package showing that the parts passed the required screening and qualification tests
e. List of company products affected
(4) Step 4: Determine that the part is or is not counterfeit (Usually accomplished as part of root cause analysis of non-conforming parts and/or materials)
(5) Step 5: If the parts are found to be counterfeit, they shall be isolated and controlled pending direction from law enforcement.
(6) Step 6: The contractor shall provide any additional required information to the government’s investigation team
END OF DI-MISC-81832
File details come from the government source that posted it. Updated .