Attch. 29 Screw Press Map and Drawings.pdf

This document is a submittal drawing and equipment specification for temporary screw press installations at the South Bay International WWTP Rehabilitation and Expansion project in San Diego, California.

The project requires two (2) temporary screw presses to be located south of the Sludge Dewatering Building. The equipment list specifies three items: (1) ASM-Mobile FSP1103 Mech South Bay screw press unit (Qty: 1, Part No. 39603869), (2) ASM-Conveyor Aux Mobile FSP SC12 7.5HP auxiliary conveyor (Qty: 1, Part No. 39603873), and (3) ASM-Cont Stand FSP1103 South Bay control stand (Qty: 1, Part No. 39603870). The screw press operates in both transport and stationary modes, with dimensions of 647.5 inches in length, 156.5 inches in height, and 102.0 inches in width when deployed. The auxiliary conveyor is extendable to varying lengths (92.1 to 118.0 inches) and includes a 7.5 horsepower motor. Key contractor requirements include verifying equipment locations prior to installation, maintaining four feet of clearance around all equipment, using clean potable or non-potable city water when possible (with regular testing of effluent water to prevent equipment corrosion), and painting equipment per project specifications SBIE 116.1 while leaving stainless steel parts unpainted. All equipment is manufactured by Schwing Bioset Inc. and includes proprietary electrical wiring details referenced in drawing 39380507.