Addendum 003 - Equipment - Module Information R2.pdf

COVER PAGE OF SELLER’S SUBMITTAL

City Name: Hanford, WA - MSA

Pall Project No.: 01.000287

Job Number: Project L-897, Subcontract 70816

Task Register 6 (Task 1 – VI Submittal Package)

To: (Contractor)

Mission Support Alliance, LLC (MSA)

PO Box 650

Richland, WA 99352

From: (Subcontractor)

Pall Water

A Division of Pall Corporation

839 State Route 13

Cortland, NY 13045

Patty Willis

Phone: 607-758-1699

Name of Project: Hanford, WA, Central Plateau WTF

Pall Document Number: NYCS000008949 Rev: 02

Description of Item: Module, MF, USA-620A

Specification Section: N/A

Deviations: N/A

INDEX:

Page 1: Cover Page Information

Page 2: Revision History and Approvals

Page 3: Tab 1 – UNA-620A Data Sheet

Pages 4-5: Tab 2 – UNA-620A Chemical Compatibility Table

Pages 6-12: Tab 3 – Calcium Chloride MSDS

Page 13: Tab 4 – 1000025497R01, Module Install Parts, 6inch

Date: 12/19/2019

PALL ADVANCED SEPARATIONS SYSTEMS

DIVISION OF PALL CORPORATION, CORTLAND, NY

Rev Name Date Created By

Approved By

Created By

Approved By

Created By

Approved By

Created By

Approved By

Revision Description

Title

Document # Revision griffinju Text Box These commodities, technology, or software may only be exported from the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

Filtration. Separation. Solution.TM

Product Data Sheet

Part Number UNA-620A

Description Hollow Fiber Membrane Water Filter

Dimensions

Membrane Area ((m ) 50

Module Length (mm) 2160

Module Diameter (mm) 165

Nominal Pore Size (µm) 0.1

Operating Conditions

Filtration Mode Outside/In

Max. Operating Temp. (Deg. C) 40 pH Range (Long Term Operation) 1 - 10 pH Range (Short Term for Cleaning) 1 – 13

Max. Transmembrane Pressure (bar) 3.0

Max. Inlet Pressure (bar) 3.0*

Max. Inlet Pressure (bar) 4.0**

* Standard locknut

** High pressure locknut

Materials of Construction

Membrane Polyvinylidenefluoride (PVDF)

Housing ABS Resin

Potting Material Polyurethane Resin

Antifreeze/Bacteriostat 40% Calcium Chloride Solution larkind Highlight

LarkinD Text Box 104 degrees F

LarkinD Text Box

538.2 square feet

LarkinD Text Box

85.04 inches

LarkinD Text Box

6.50 inches

LarkinD Text Box 3.937x10-6 inches

LarkinD Text Box

43.5 psig

LarkinD Text Box

43.5 psig

LarkinD Text Box

58.0 psig larkind Highlight larkind Highlight

Pall MF / Membrane Compatibility

Chemical Condition Compatibility

Concentration Temperature Sodium hypochlorite 1 % 25 Excellent Hydrogen peroxide 2 % 25 Excellent Formaldehyde 3 % 25 Excellent Ethanol 100 % 25 Good1 Caustic soda 1 N 25 Excellent2 Caustic soda and Sodium hypochlorite

NaOH (1N) NaClO (0.5%)

25 Excellent

Citric acid 10 % 25 Excellent Nitric acid 1 N 25 Excellent Hydrochloric acid 1 N 25 Excellent Sulfuric acid 1 N 25 Excellent Glycerin 100 % 25 Excellent Chlorinated solvents 25 Not compatible Aromatic base solvent 25 Not compatible Ester base solvents 25 Not compatible Ether base solvents 25 Not compatible Ketone base solvents 25 Not compatible

Notes:

1. Compatible up to 30 days exposure.

2. Use of caustic soda alone will result in the slight discoloration of the membrane and extraction of F- ion, however, there is no deterioration in the physical properties of membrane.

Therefore, the cleaning of module by caustic soda alone should be limited and use of caustic soda with sodium hypochlorite is recommended.

Facscan Text Box C396

DRAWING NUMBER

MATERIAL MASTER

DRAWING NAME

PROJECT ID

DWG SIZE

REVISION

SHEET OF

Copyright PALL CORPORATION This document may contain confidential technical data, including trade secrets proprietary to Pall Corporation. The drawing, design rights and all other disclosures in this document are the property of Pall Corporation. Unauthorized use, copying, distribution to third parties, manufacture, or reproduction in whole or in part is prohibited.

PALL Corporation

PROJECT ENGINEER

ENGINEER

ENGINEER

ENGINEER

CHECKER

DRAWN BY

NAME DATE

UNLESS OTHERWISE SPECIFIED, THE FOLLOWING

INFORMATION PERTAINS ONLY TO THIS SHEET

SCALE

CODE INDENTIFICATION NO.

DO NOT SCALE

FROM DRAWING

THIRD ANGLE

PROJECTION

TOLERANCE

X. ±

.X ±

.XX ±

.XXX ±

FRACTION ±

ANGLE ± DEG

DIMENSIONS ARE IN

INCHES

ONLY

MILLIMETER

ONLY

IN [mm] mm [IN]

ALL FINISHED SURFACES

μIN μm

SEE SHEET 1 FOR REVISION

17238

These commodities, technology or software may only be exported from the United States in accordance with the

Export Administration

Regulations. Diversion contrary to U.S. law is prohibited.

IMPORTANT: BEFORE ATTEMPTING TO OPERATE OR INSTALL THIS SYSTEM, IT IS ESSENTIAL TO READ AND UNDERSTAND

THIS PRODUCT'S OPERATION AND MAINTENANCE MANUAL (SHIPPED UNDER SEPARATE COVER). FAILURE TO READ THE

OPERATION AND MAINTENANCE MANUAL BEFORE ATTEMPTING TO OPERATE ANY PALL CORPORATION EQUIPMENT MAY

RESULT IN SERIOUS PERSONAL INJURY AND/OR PRODUCT DAMAGE, AND VOID ANY AND/OR ALL WARRANTIES

.XXXX ±

Pall Advanced Separation Systems Industrial, Cortland NY

D. LEONARD

WH061509

STANDARD

B

19MAY2010

L. BENJAMIN 18MAY2010

S. SMITH 19MAY2010

TEMPLATE REV: R2013.1

1:8

X

1/8

N/A

N/A

N/A

N/A

N/A

UPDATED MATERIAL MASTER NUMBERS AND NEW FORMAT

FOR VAULT.01 RLH

06MAR2013

JMG

06MAR2013

P. BRAME

06MAR2013

ENGINEERING

STANDARD

DOCUMENT

L T

L E D B Y

ORTNOC

ANDARD S

GR

O

U P

SGNIREE

NI

G

N E

MODIFY

TON

OD