23_Q_A_6_Submittal_List_2026-07-20_Amendment_0004_0004.xlsx

XLSX spreadsheet 59 KB Posted Sep 18, 2026

Attached to: DENA 332037 Eielson Roof Replacement
Solicitation number: 140P2026R0087
Issued by: Department of the Interior National Park Service National Office

About this file

Written by GovTribe AI · Sep 18, 2026

This is a Submittal List with Review Estimate template developed by the National Park Service Denver Service Center for construction document and construction phase project management. The template is specifically populated for PMIS Project 227793, titled "Replace Roof at the Eielson Visitor Center," and establishes comprehensive submittal requirements and review time estimates for the Architect/Engineer (A/E) during construction services.

The document identifies two primary responsible parties: the Design A/E during the Construction Documents (CD) phase and the Construction Contracting Officer Representative (COR) during the Construction phase. The template categorizes submittals as either Action submittals (requiring Government responsive review) or Informational submittals (reviewed by Construction Management Representative only). It establishes detailed submittal requirements across 45 specification sections encompassing structural systems (concrete, masonry, structural steel, metal fabrications), building envelope components (roof panels, bituminous membrane roofing, sheet metal flashing, sealants), interior finishes (gypsum board, flooring, painting), and MEP systems (HVAC, fire suppression, plumbing, electrical). For each submittal, the template requires identification of specification section, paragraph number, description, and submittal category, with corresponding review time estimates measured in hours by discipline (Architect, Civil Engineer, Structural Engineer, Mechanical Engineer, Electrical Engineer, Project Manager, Landscape Architect). The A/E's estimated review hours are applied against IDIQ contract hourly rates to formulate the Government's cost estimate for submittal review services to be incorporated into the A/E Construction Services task order negotiation.

View the file

Other files

File	Type	Posted
Sol_140P2026R0087_Amd_0011.pdf	PDF	Oct 13, 2026
32_Finalized_Q_and_A_amendment_011_responses_0011.pdf	PDF	Oct 13, 2026
Sol_140P2026R0087_Amd_0010.pdf	PDF	Oct 9, 2026
Sol_140P2026R0087_Amd_0009.pdf	PDF	Oct 7, 2026
31_Finalized_Q___A_for_DENA_Amendment_0009_0009.pdf	PDF	Oct 7, 2026
30_01_50_00_Temporary_Facilities_and_Controls_0008_0008.pdf	PDF	Oct 2, 2026
29_Amendment_Summary_0008_0008.pdf	PDF	Oct 2, 2026
Sol_140P2026R0087_Amd_0008.pdf	PDF	Oct 2, 2026
27_Finalized_Q___A_for_DENA_Amendment_0005_0007.pdf	PDF	Sep 28, 2026
25_DENA_332037_-_Pictures_0007.pdf	PDF	Sep 28, 2026
26_DENA_332037_Submittal_List_2026-07-20_R1_0007.pdf	PDF	Sep 28, 2026
Sol_140P2026R0087_Amd_0007.pdf	PDF	Sep 28, 2026
28_DENA_332037_EVC_Rehabilitation_Addendum_2R1_0007.pdf	PDF	Sep 28, 2026
Sol_140P2026R0087_Amd_0006.pdf	PDF	Sep 23, 2026
D01_Amendment_0006_DENA_Roof_and_Interior_Repair_0006.pdf	PDF	Sep 23, 2026
Sol_140P2026R0087_Amd_0005.pdf	PDF	Sep 23, 2026
Sol_140P2026R0087_Amd_0004.pdf	PDF	Sep 18, 2026
22_DENA_332037_Q_A_9_18_26_Amend_0004_0004.xlsx	XLSX spreadsheet	Sep 18, 2026
21_DENA_332037_-_EVC_Rehabilitation_Amendment_0004_0004.pdf	PDF	Sep 18, 2026
15_26_30_00_Facility_Electrical_Power_Generating__-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
10_02_85_00_Microbial_Remediation_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
14_21_13_00_Fire_Suppression_Sprinkler_System_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
09_02_41_19_Selective_Demolition_Pg_1-3_Amednment_0003_0003.pdf	PDF	Sep 17, 2026
20_Eielson_Visitor_Center_-_Fire_Sprinkler_As-Builts_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
Sol_140P2026R0087_Amd_0003.pdf	PDF	Sep 17, 2026
12_07_52_16_SBS_Modified_Bituminous_Membrane_Roofing_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
16_31_20_00_Earth_Moving_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
11_05_50_00_Metal_Fabrications_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
08_01_27_00_Definition_of_Contract_Line_Items_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
19_DENA_332037_-_EVC_Rehabilitation_Addendum_01_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
18_Contract_Price_Schedule_(Fields_Blank)_Amendment_0003_0003.xlsx	XLSX spreadsheet	Sep 17, 2026
17_32_96_13_Groundwater_Transplanting_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
13_12_36_00_Countertops_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
06_Specification_Index_-_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
07_01_26_01_Contract_Modification_Procedures_Pg_7_Amendment_0003_0003.pdf	PDF	Sep 17, 2026
Amendment_0002_0002.pdf	PDF	Sep 2, 2026
Sol_140P2026R0087_Amd_0002.pdf	PDF	Sep 2, 2026
Sol_140P2026R0087_Amd_0001.pdf	PDF	Aug 6, 2026
Amendment_1_DENA_332037_0001.pdf	PDF	Aug 6, 2026
DENA_332037_As_Built_Drawings_0001.pdf	PDF	Aug 6, 2026
DENA_332037_Final_Construction_Documents_Amendment_1_0001.pdf	PDF	Aug 6, 2026
05__Subcontracting_Percentage_Worksheet.pdf	PDF	Jul 31, 2026
1-55.pdf	PDF	Jul 31, 2026
Drawings_56-99.pdf	PDF	Jul 31, 2026
03__Final__Submittal_List_2026-06-12.xlsx	XLSX spreadsheet	Jul 31, 2026
Sol_140P2026R0087.pdf	PDF	Jul 31, 2026
01_DENA_332037_Final_Construction_Documents_07-20-2026.pdf	PDF	Jul 31, 2026
04_WD_AK20260001_May_17_2026.pdf	PDF	Jul 31, 2026
B08_FINAL_Solicitation_updated_7_31_26.pdf	PDF	Jul 31, 2026

Show all 49

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Instructions

	Submittal List with Review Estimate Instructions
	National Park Service (NPS) - Denver Service Center (DSC) \| 1-27-21
	DESIGN SERVICES (Construction Documents (CD) Phase)
Responsible Party: Design Architect/Engineer (A/E)
1	Enter Park Acronym, Project Management Information System (PMIS) Number, and Project Title.
2	Record construction submittal requirements. Complete Specification Section, Paragraph Number, and Description sections. Insert additional rows as required for sections containing multiple submittals.
3	In Requirements section, enter X for submittal requirements where applicable. Insert additional columns as needed under Informational or Action. Refer to Specification Section 01 33 23 for clarification. (Action submittals require Government resposive action and Informational submittals do not.) Division 1 Specifications submittals are Information submittals.
4	Attach black and white version to Specification Section 01 33 23 in project manual. Delete instructional note on top of page.
	CONSTRUCTION SERVICES (Construction Phase)
Responsible Party: Construction Contracting Officer Representative (COR)
1	Use Submittal List submitted with Final Construction Documents. Copy/paste submittal information into Submittal List with Review Estimate Template. If amendments issued, adjust submittal requirements as necessary.
2	Attach this template to Architect/Engineer (A/E) Construction Services Scope of Services.
3	Use Review Estimate to estimate time required for Architect/Engineer to accomplish Action submittal reviews. Enter estimated whole or partial number of hours per discipline.
4	Add discipline heading column as required.
5	Use total number of hours per discipline at bottom of template and apply hourly rates listed in Indefinite Delivery/Indefinite Quantity (IDIQ) contract (using appropriate option period rates) to formulate Government estimate for submittal reviews.
6	Use information from this template to negotiate submittal review portion of Architect/Engineer Construction Services task order.
7	Provide template to Construction Management Representative (CMR) to show submittals they are responsible for and submittals to be forwarded to the Architect/Engineer. All Informational submittals will be reviewed by Construction Management Representative.
Responsible Party: Architect/Engineer (A/E)
1	Indicate level of effort required for each Action submittal review by entering number of whole or partial hours for each discipline under Architect/Engineer Review Time section.
2	All Informational submittals will be reviewed by Construction Management Representative (CMR).
3	Use total number of hours per discipline at bottom of template and apply hourly rates listed in Indefinite Delivery/Indefinite Quantity (IDIQ) contract (using appropriate option period rates) to formulate estimate.
4	Use this estimate to negotiate submittals review portion of Architect/Engineer Construction Services portion of the task order.

&8&K01+024Submittal List with Review Estimate Instructions | National Park Service (NPS) - Denver Service Center (DSC) &8&K01+024page &P of &N

Template

Submittal List with Review Estimate Template

National Park Service (NPS) - Denver Service Center (DSC) | 1-27-21

			SUBMITTAL LIST							ACTION SUBMITTAL
										REVIEW ESTIMATE
	Park Acronym/Project Management Information System (PMIS) Number:			227793						(Complete this portion for Architect / Engineer (A/E)
	Project Title:		Replace Roof at the Eielson Visitor Center							construction service task order negotiation.)
			SUBMITTAL			REQUIREMENTS				ARCHITECT / ENGINEER REVIEW TIME
						(Indicate with X)				(Indicate in whole or partial hours.)
				INFORMATIONAL				ACTION
	SPECIFICATION SECTION	PARAGRAPH NUMBER	DESCRIPTION	CERTIFICATIONS OR LABORATORY TESTS	REPORTS OR CALCULATIONS
OR PLAN	MANUFACTURER DATA
AND INSTRUCTIONS	OTHER	SAMPLES	SHOP DRAWINGS	MANUFACTURER DATA
AND INSTRUCTIONS	OTHER		ARCHITECT	CIVIL ENGINEER	STRUCTURAL ENGINEER	MECHANICAL ENGINEER	ELECTRICAL ENGINEER	PROJECT MANAGER COORDINATION	LANDSCAPE ARCHITECT

01 31 00		Project Management and Coordination
1	1.3.A	Coordination Drawings	X

01 32 16		Construction Schedule
1	1.3.B	Schedule of Values	X
2	1.3.C	Critical Path Method (CPM) Reports	X
3	1.3.D	Construction Schedule	X

01 32 33		Photo Documentation
1	1.2.B	Complete Set of Digital Images	X

01 35 13.22		Archeological Requirements
1	1.3.A	Work Schedule in Archeologically Sensitive Areas	X

01 35 23		Safety Requirements
1	1.3.A	Accident Prevention Plan	X

01 40 00		Quality Requirements
1	1.4.A	Quality Control Plan		X
2	1.4.B	Qualification Data	X
3	1.4.H	Permits, Licenses, and Certificates	X

01 57 23		Temporary Storm Water Pollution Prevention
1	1.3.A.1	UPPP	X
2	1.3.B	Inspection Schedule: Pollution Prevention Measures	X
3	1.3.C	Inspection Schedule: Storm Water Pollution Prevention Measures	X
4	1.3.D	Erosion Control Products		X

01 67 00		Product Requirements
1	1.3.A	Record Submittals	X

01 73 29		Cutting and Patching
1	1.2.A	Cutting and Patching Plan	X

01 73 40		Execution
1	1.2.A	Location and Elevation Certificates	X
2	1.2.B	Landfill Receipts		X

01 74 19		Construction Waste Management and Disposal
1	1.4.A	Waste Management Plan	X
2	1.4.B	Project Waste Management Plan Worksheet		X

01 77 00		Closeout Procedures
1	1.3.A.1	Specific Warranties, Guarantees, etc.		X
2	1.3.A.2	Project Record Documents			X
3	1.3.A.3	Environmental Record Documents		X
4	1.3.A.4	Posted Operating Instructions		X
5	1.3.A.5	Tools/Spare Parts		X
6	1.3.A.6	TAB Report	X

01 78 23		Operation and Maintenance Data
1	1.2.A	O&M Manual	X

02 41 19		Selective Demolition
1	1.5.A	Engineering Survey		X
2	1.5.B	Proposed Protection Measures	X
3	1.5.C	Schedule of Selective Demolition Activities	X
4	1.5.D	Predemolition Photographs or Video		X
5	1.5.E	Statement of Refrigerant Recovery		X
6	1.5.F	Warranties		X
7	1.6.A	Inventory		X

03 30 00		Cast-In-Place Concrete
1	1.3.A.1, 2.2	Steel Reinforcing			X
2	1.3.A.2, 2.6	Admixtures			X
3	1.3.B	Design Mixtures		X
4	1.3.C.1	Cold‐Weather Placement Plan		X
5	1.3.C.2	Cold‐Weather Protection Plan		X
6	1.3.D.1	Material Certificates for Cementitious Materials	X
7	1.3.D.2	Material Certificates for Admixtures	X
8	1.3.D.3	Material Certificates for Steel Reinforcement And Accessories	X
9	1.3.E.1	Concrete Testing Reports		X
10	1.3.E.2	Cold Weather Temperature Reports		X

04 81 00		Unit Masonry Assemblies
1	1.3.A, 2.1	Concrete Masonry Unit (CMUS)				X
2	1.3.A, 2.2	Mortar and Grout				X
3	1.3.A, 2.3.A	Uncoated Steel Reinforcing Bars				X
4	1.3.A, 2.4.A	Unit Type Inserts in Concrete				X
5	1.3.A, 2.4.B	Anchor Bolts				X
6	1.3.A, 2.4.C	Postinstalled Anchors				X
7	1.3.B.1	Masonry Units Shop Drawings			X
8	1.3.B.2	Reinforcing Steel Shop Drawings			X
9	1.3.B.3	Fabricated Flashing Shop Drawings			X
10	1.4.C	Qualification Data for Testing Agency	X
11	1.4.D	Mix Designs for Each Type of Mortar and Grout		X
12	1.4.E	Cold Weather Procedures		X

05 12 00		Structural Steel Framing
1	1.3.A, 2.3	Primer			X
2	1.3.B	Shop Drawings		X
3	1.3.C	Qualification Data for Installer	X
4	1.3.C	Qualification Data for Fabricator	X
5	1.3.C	Qualification Data for Testing Agency	X
6	1.3.D	Welding Certificates	X
7	1.3.E	Mill Test Reports for Structural Steel	X
8	1.3.F.1	Product Test Report for Bolts, Nuts, and Washers	X
9	1.3.F.2	Product Test Report for Tension-Control, High Strength Bolt-Nut-Washer Assemblies	X

05 31 00		Steel Decking
1	1.2.A.1, 2.2.A	Roof Deck	X
2	1.2.A.2, 2.3.B	Mechanical Fasteners	X
3	1.2.A.3	Sidelap Fasteners	X
4	1.2.A.4, 2.3.D	Galvanizing Repair Paint	X

05 40 00		Cold Formed Metal Framing
1	1.2.A.1, 2.3.A	Exterior Non-Load-Bearing Wall Framing: Steel Studs		X
2	1.2.A.1, 2.3.B	Exterior Non-Load-Bearing Wall Framing: Steel Track		X
3	1.2.A.1, 2.3.C	Exterior Non-Load-Bearing Wall Framing: Single Deflection Track		X
4	1.2.A.1, 2.4.A	Exterior Soffit and Roof Frame		X
5	1.2.A.1, 2.4.B	Exterior Soffit and Roof Framing: Steel Track		X
6	1.2.A.1, 2.6.A	Steel Shapes and Clips
7	1.2.A.1, 2.6.B	Screw Anchors
8	1.2.A.1, 2.6.C	Mechanical Fasteners
9	1.2.A.1, 2.7.A	Galvanizing Repair Paint
10	1.2.A.2	Vertical Deflection Clips		X
11	1.2.B.1	Steel Sheet Test Reports	X
12	1.2.B.2	Power‐Actuated Anchors Test Reports	X
13	1.2.B.3	Mechanical Fasteners Test Reports	X

05 50 00		Metal Fabrications
1	1.3.A.1, 2.3.B	Steel Bolts and Nuts			X
2	1.3.A.1, 2.3.C	High‐Strength Bolts, Nuts, and Washers			X
3	1.3.A.1, 2.3.D	Stainless Steel Bolts and Nuts			X
4	1.3.A.1, 2.3.E	Anchor Bolts			X
5	1.3.A.1, 2.3.G	Cast‐in‐Place Anchors in Concrete			X
6	1.3.A.1, 2.3.H	Post‐Installed Anchors			X
7	1.3.A.2, 2.4.B	Universal Shop Primer			X
8	1.3.A.2, 2.4.C	Water‐Based Primer			X
9	1.3.A.2, 2.4.D	Epoxy Zinc‐Rich Primer			X
10	1.3.A.2, 2.4.E	Shop Primer for Galvanized Steel			X
11	1.3.A.2, 2.4.F	Galvanizing Repair Paint			X
12	1.3.A.2, 2.4.G	Bituminous Paint			X
13	1.3.A.3, 2.4.H	Shrinkage‐Resisting Grout			X
14	1.3.B	Shop Drawings		X
15	1.3.C	Delegated Design Submittals				X
16	1.4.A	Mill Certificates	X
17	1.4.B	Welding Certificates	X
18	1.4.C	Paint Compatibility Certificates	X

06 10 00		Rough Carpentry
1	1.3.A, 2.2	Dimension Lumber for Concealed Applications	X
2	1.3.A, 2.4.A	Fasteners and Anchors	X

06 11 00		Interior Rough Carpentry
1	1.3.A, 2.2	Dimension Lumber for Concealed Applications	X
2	1.3.A, 2.3	Construction Panels	X
3	1.3.A, 2.4	Fasteners and Adhesives	X

06 16 00		Sheathing
1	1.2.A, 2.1	Wall Sheathing	X

06 20 00		Finish Carpentry
1	1.3.A, 2.2.A	Hardwood Lumber		X
2	1.3.B	Shop Drawings	X

06 41 00		Architectural Wood Casework
1	1.3.A, 2.7	Panel Cores for Wood Veneer and HPDL Panels		X
2	1.3.A, 2.4	Veneer Tape Edgebanding		X
3	1.3.A, 2.8	Hardware		X
4	1.3.A, 2.9	Accessory Components		X
5	1.3.B	Shop Drawings	X

07 21 00		Thermal Insulation
1	1.2.A, 2.2.A	Molded (Expanded) Polystyrene Board Insulation, Type I	X

07 21 19		Foamed-In-Place Insulation
1	1.2.A, 2.1.A	BE-3 Foamed-In-Place Insulation		X
2	1.2.B	Manufacturer's Installation Instructions	X

07 41 13.16		Standing Seam Metal Roof Panels
1	1.2.A, 2.2	Standing Seam Metal Roof Panels	X
2	1.2.A, 2.3	Substrate Board	X
3	1.2.A, 2.4	Vapor Retarder	X
4	1.2.A, 2.5	Roof Insulation	X
5	1.2.A, 2.6.A	Aluminum Sheet	X

07 52 16		Styrene-Butadiene-Styrene (SBS) Modified Bituminous Membrane Roofing
1	1.3.A, 2.3.A	Substrate Board					X
2	1.3.A, 2.3.B	Cover Board					X
4	1.3.A, 2.4.A	Extruded-Polystyrene Board Insulation					X
5	1.3.A, 2.4.B	Molded (expanded) Polystyrene Board Insulation:					X
6	1.3.A, 2.5.A	Modified Bituminous Membrane: Base Field Ply					X
7	1.3.A, 2.5.B	Modified Bituminous Membrane: Cap Ply					X
8	1.3.B	Shop Drawings				X
10	1.4.A.1	Performance Requirement Certificate	X
11	1.4.A.2	Special Warranty Certificate	X
12	1.4.B	Product Test Reports		X
13	1.4.C	Research Reports		X
14	1.4.D.1	Fastener Pullout Test Reports		X
16	1.4.E	Field Quality-Control Reports		X
17	1.4.F	Sample Warranties			X
18	1.4.G	Maintenance Data			X

07 62 00		Sheet Metal Flashing and Trim
1	1.3.A, 2.1.A	Pre-Finished Galvanized Steel			X
2	1.3.B	Shop Drawings		X
3	1.3.C	Samples	X

07 92 00		Joint Sealant
1	1.3.A, 2.3.A	Non-Staining Silicone Sealant		X
2	1.3.A, 2.3.B	Polyurethane Sealant		X
3	1.3.A, 2.3.C	Acrylic Emulsion Latex		X
4	1.3.A, 2.3.D	Silicone, S, NS, 50, NT		X
5	1.3.B	Color Cards for Selection	X

09 21 16		Gypsum Board Assemblies
1	1.3.A, 2.1	Gypsum Board Assemblies	X
2	1.3.A, 2.2.D	Nonstructural Framing System Components	X
3	1.3.A, 2.2.E	Partition Head to Structure Connections	X
4	1.3.A, 2.3.B	Gypsum Wallboard	X
5	1.3.A, 2.4.A	Acoustic Insulation	X
6	1.3.A, 2.4.C	Finish Accessories	X
7	1.3.A, 2.4.D	Joint Materials	X
8	1.3.A, 2.4.E	Screws for Attachment to Steel Members Less Than 0.03 inch in Thickness	X
9	1.3.A, 2.4.F	Screws for Attachment to Steel Members From 0.033 to 0.112 inch in Thickness	X

09 51 00		Acoustical Ceilings
1	1.3.A, 2.3	Acoustical Units	X
2	1.3.A, 2.4	Suspension Systems	X
3	1.3.A, 2.5.A	Support Channels and Hangers	X

09 65 00		Resilient Sheet Flooring
1	1.3.B, 2.1.A	Linoleum Sheet Flooring			X
2	1.3.B, 2.2.A	Resilient Base			X
3	1.3.C	Selection Samples		X
4	1.3.D	Verification Samples		X
5	1.3.E	Maintenance Data	X

09 68 13		Tile Carpeting
1	1.3.A, 2.2	Joint Layout Drawings		X
2	1.3.A, 2.3.A	Manufacturer's Instructions			X
3	1.3.A, 2.3.B	Concrete Subfloor Test Report	X

09 91 23		Interior Painting
1	1.3.A, 2.3.A	Paint I-OP			X
2	1.3.A, 2.3.B	Paint I-OP-MD-DT
3	1.3.B	Samples		X
4	1.3.C	Manufacturer's Instructions	X

09 93 00		Staining and Transparent Finishing
1	1.3.A, 2.3.A.1	Finish on Wood - Trim: Stain		X
2	1.3.A, 2.3.A.2	Finish on Wood - Trim: Top Coat		X
3	1.3.B	Manufacturer's Instructions	X

12 36 00		Countertops
1	1.3.A, 2.1.A	Solid Surfacing Countertops		X
2	1.3.A, 2.2.A	Plywood for Supporting Substrate		X
3	1.3.A, 2.2.B	Adhesives		X
4	1.3.A, 2.2.C	Joint Sealant		X
5	1.3.B	Shop Drawings	X

20 05 29		Hangers and Supports For Mechanical
1	1.2.A, 2.2.A	Non Insulated Pipe Hangers		X
2	1.2.A, 2.3	Hanger Rods		X
3	1.2.A, 2.4	Channel Struts		X
4	1.2.A, 2.5	Steel Structure Attachments		X
5	1.2.B	Application Schedule	X
6	1.2.C.1	Test Reports: Third Party	X
7	1.2.C.2	Concrete Anchors Special Inspection Form	X

20 07 00		Insulation for Mechanical
1	1.2.A, 2.1.C	Lagging Fabric		X
2	1.2.A, 2.1.D	Thermal Insulation Coatings		X
3	1.2.A, 2.1.E	Insulating Cement		X
4	1.2.A, 2.1.G	Plastic Insulation Covers		X
5	1.2.A, 2.1.H	Metal Jackets		X
6	1.2.A, 2.2.A.1	Outside, Relief, Exhaust, and Combustion Air Duct Insulation: Rectangular Ductwork		X
7	1.2.A, 2.2.A.2	Outside, Relief, Exhaust, and Combustion Air Duct Insulation: Round Ductwork		X
8	1.2.B	Application Schedule	X

21 13 00		Fire Suppression Sprinkler System
1	1.2.A, 2.1	Piping and Fittings: Interior			X
2	1.2.A, 2.2	Sprinkler Heads			X
3	1.2.A, 2.3	Zone Isolation Valve Tags			X
4	1.2.A, 2.4	Fire Protection Backflow Preventer – Double Check Valve Assemblies			X
5	1.2.A, 2.5	Check Valve			X
6	1.2.A, 2.6	Isolation Valve			X
7	1.2.A, 2.7	Tamper Switch			X
8	1.2.A, 2.8	UL Listed Glycol Fire Protection Fluid			X
9	1.2.B	Contractor Qualifications	X
10	1.2.C	Shop Drawings and Calculations		X

22 13 16		Sanitary Waste and Vent Piping
1	1.2.A, 2.2	Vent Through Roof Flashing		X
2	1.2.B	Application Schedule	X

22 13 19		Sanitary Waste Piping Specialties
1	1.2.A, 2.1.A	Floor Drains	X

22 42 13		Commercial Water Closets and Urinals
1	1.2.A, 2.2	Floor Mounted Water Closets	X
2	1.2.A, 2.3	Accessories	X

23 05 00		Common Work Results for HVAC
1	1.2.A, 2.2.A	Thermometers		X
2	1.2.A, 2.3.A	Pressure Gauges		X
3	1.2.A, 2.4.A	Drain Valves		X
4	1.2.A, 2.7.A	Air Vents		X
5	1.2.A, 2.8.A	Dielectric Pipe Protection		X
6	1.2.A, 2.9.A	Escutcheons		X
7	1.2.A, 2.10.A	Flow Test Kit		X
8	1.2.B	Balance Valve Schedule	X

23 05 93		Testing, Adjusting and Balancing for HVAC
1	1.2.A	Balancer Qualifications and Balancing Plan	X

23 09 23		Direct Digital Control Systems for HVAC
1	1.2.A, 1.2	Contractor Qualifications	X
2	1.2.A, 1.4	BMS Software Function Index		X
3	1.2.A, 1.5.E.1	System Architecture Schematic		X
4	1.2.A, 1.5.E.2	Riser Diagram		X
5	1.2.A, 1.5.E.3	Control Valve Schedule		X
6	1.2.A, 1.5.E.4	Damper Actuator Schedule		X
7	1.2.A, 1.5.E.5	HRV Control Diagrams		X
8	1.2.A, 1.5.E.6	Terminal Unit Control Diagrams		X
9	1.2.A, 1.5.E.7	Miscellaneous Equipment Control Diagrams		X
10	1.2.A, 1.5.E.8	I/O Interface Diagrams		X
11	1.2.A, 2.2	Direct Digital Controllers			X
12	1.2.A, 2.3	Temperature Sensors			X
13	1.2.A, 2.4	Thermostats and Temperature Switches			X
14	1.2.A, 2.5	Other Switches			X
15	1.2.A, 2.6	Signal Conditioners			X
16	1.2.A, 2.7	Control Relays			X
17	1.2.A, 2.8	Control Valves			X
18	1.2.A, 2.9	Damper and Valve Actuators			X
19	1.2.A, 2.11	Panels			X

23 21 13		Hydronic Piping
1	1.2.B	Application Schedule	X

23 31 13		HVAC Ducts and Casings
1	1.2.A, 2.1.B	Duct Sealant		X
2	1.2.B	Shop Drawings: Special Fabrications	X
3	1.2.C	Shop Drawings: Substantial Deviations	X

23 33 11		Air Duct Accessories
1	1.2.A, 2.2.A	Flexible Connections: Non-Insulated Ductwork	X
2	1.2.A, 2.2.B	Flexible Connections: Insulated Ductwork	X
3	1.2.A, 2.3	Turning Vanes	X
4	1.2.A, 2.4	Spin-In Fittings	X
5	1.2.B	Shop Drawings: Contractor Fabricated Items

23 33 13		Dampers
1	1.2.A, 2.2.A	Backdraft Dampers		X
2	1.2.B	Shop Drawings: Contractor Fabricated Items	X

23 33 56		HVAC Louvers
1	1.2.A, 2.1	Louvers	X

23 82 36		Finned Tube Radiation
1	1.2.A, 2.2.A	Bonderized Steel Enclosures	X
2	1.2.A, 2.3	Nonferrous Heating Elements	X
3	1.2.A, 2.4.A	Enclosure Top Supports	X
4	1.2.A, 2.5.A	Enclosure and Element Saddle Support Brackets	X
5	1.2.A, 2.6.A	Elements Saddles	X

26 27 26		Wiring Devices and Plates
1	1.2.A,B, 2.2	Receptacles	X
2	1.2.A,B, 2.3	Plates	X

26 30 00		Facility Electrical Power Generating and Storing Equipment
1	1.4.A	Qualifications	X
2	1.4.B	Shop Drawings		X
3	1.4.C.1.a	Inverters			X
4	1.4.C.1.b	Charge Controllers			X
5	1.4.C.1.c	Batteries and Battery Rack System			X
6	1.4.C.1.d	Resistive Dump Loads and Equipment			X
7	1.4.D	Warranty Information			X
8	1.5.E	O&M Manuals				X

26 50 00		Lighting
1	1.2.A, 2.1	Light Fixtures	X
2	1.2.A, 2.5	Exit Signs and Emergency Lighting Units	X

26 51 02		Lighting Control Devices
1	1.2.A, 2.3	Wired Wallbox Vacancy Sensors		X
2	1.2.A, 2.4	Wired Occupancy Sensors		X
3	1.2.B	Manufacturer's Installation Instructions	X
4	1.2.C	Operation and Maintenance Data		X

31 20 00		Earth Moving
1	1.3.A	Traffic Control Plan		X
2	1.4.A	Gradation Analyses	X
3	1.4.B	Modified Proctor Test Results	X
4	1.4.C	Compaction Test Results	x

32 96 13		Groundcover Transplanting
1	1.5.A	Existing Conditions		X
2	1.6.a	Weed Free Certification	X

Drawings
1	C301	Geogrid Layout			X
2	C700	Stone and Rock Samples		X
3	C700	Mortar Sample		X
4	C700	Resume of Masonry Supervisor	X

Total: 0 0 0 0 0 0 0

Submittal List with Review Estimate Template | National Park Service (NPS) - Denver Service Center (DSC) &8&K01+024page &P of &N

File details come from the government source that posted it. Updated Sep 18, 2026.