Vex Robotics Bundle Kit
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is KNOXUSACG2108 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 333999 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-09-01 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions.The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: BRAND NAME OR EQUAL VEX V5 Classroom Started Bundle (Brand: Vex Robotics; SKU 276-7070)Everything needed to implement a hands-on STEM learning solution for a classroom of 12-18 students! This bundle contains all the necessary parts to bring engineering, math, technology or computer science to life with six V5 Classroom Starter kits.
Note: Swept Away Full Field Perimeter not included.
Contains (6) V5 Classroom Starter Kits
Scalable programming software suite available with VEXcode
Standards aligned STEM Labs help develop how students approach critical thinking & problem solving
Electronics components include the following:
(6) V5 Robot Brains
(6) V5 Controllers
(6) V5 Robot Radios
(6) V5 Robot Battery Li-Ion 1100mAh
(6) V5 Robot Battery Cables
(6) V5 Robot Battery Chargers
(24) V5 Smart Motors
(12) Bumper Switch v2
(18) 300mm Smart Cables
(6) 600mm Smart Cables
(6) 900mm Smart Cables
(6) USB A to Micro Cables
Structure components include the following:
(180) #8-32 Hex Nut
(90) 1-Post Hex Nut Retainer w/ Flat Bearing
(30) 1-Post Hex Nut Retainer
(42) 4-Post Hex Nut Retainer
(30) Flat Bearing
(138) Rubber Shaft Collar
(36) 0x2 Connector Pin
(48) 1/8" Spacer
(24) 3/8" Spacer
(18) 1/2" Spacer
(12) 7/8" Spacer
(180) #8-32 x 3/8" Star Drive Screw
(12) #8-32 x 1.000" Star Drive Screw
(24) #8-32 x 1/2" Locking Star Drive Screw
(24) #8-32 x 1.500" Locking Star Drive Screw
(18) 2x2x2x20 Steel U-Channels
(12) 1x2x1x15 Steel C-Channels
(12) 1x2x1x25 Steel C-Channels
(12) 2x2x14x20 Steel Angles
Motion components include the following:
(12) 4" Omni Wheels
(12) 4" Wheels
(12) 2" Shafts
(12) 3" Shafts
(6) 3.5" Shafts
(18) 4" Shafts
(6) 12T Metal Pinions
(6) 12T Metal Pinion Inserts
(6) 84T High Strength Spur Gears
(60) High Strength Gear Shaft Inserts
(6) V5 Claw Assemblies
Tools and Accessories include the following:
(12) V5 Battery Clips
(12) V5 Brain Attachment Flanges (Long)
(12) V5 Brain Attachment Flanges (Short)
(12) #32 Rubber Bands
(12) T15 Star Drive Keys
(300) 4" Zip Ties
(6) V5 Clawbot Instruction Manuals, 19, EA;LI 002: BRAND NAME OR EQUAL VRC Tipping Point Full Field & Game Element Kit (Brand: Vex Robotics; SKU 276-7048)Everything you need to build a complete VRC Tipping Point field. One Full Field & Game Element Kit (276-7048) includes the following:
(1) VRC Tipping Point Game Element Kit (276-7049)
(1) VRC Tipping Point Field Element Kit 1 (276-7051)
(1) VRC Tipping Point Field Element Kit 2 (276-7052), 19, EA;LI 003: BRAND NAME OR EQUAL VRC Anti-Static Field Tile Kit (Brand: Vex Robotics; SKU 276-7175)
Interlocking 2' x 2' Foam Tiles used to construct a VEX Robotics Competition field. These tiles are resistant to Electrostatic Discharge. 36 Tiles are required for a standard VRC Field. Field perimeter & hardware not included.
• The kit includes (36) Gray Anti-Static Foam Tiles
• Tiles have the following salient characteristics:
• Each tile is 1.1 lbs (499 g)
• 1 Tile - 2' x 2' (.61m x .61m)
• 0.63" (1.6 cm)
• Anti-Static EVA Foam (35-40), 19, EA;LI 004: BRAND NAME OR EQUAL Competition Field Perimeter Kit (Brand: Vex Robotics; SKU 278-1501)The official VEX Robotics Competition Field is setup on a foam surface, with a sheet-metal and polycarbonate perimeter frame. Inside this perimeter, game-specific elements can be added.
- Metal frame for the VEX Robotics Competition field perimeter
- Includes ALL parts required for frame assembly (includes polycarbonate)
- Includes two driver-control posts
- Does NOT include Floor Tiles or Electronics
- Modular and designed for easy assembly, disassembly, storage
- Includes the Competition Corner Bracket (4-pack).
The kit includes the following:
(24) Sheet-Metal Horizontal Field Component
(24) Sheet-Metal Vertical Field Component
(12) Clear Lexan Wall Panel - 8" x 46" x 1/8"
(16) Sheet-Metal Wall Assembly Gusset
(4) Sheet-Metal Corner Assembly Gusset
(4) Competition Field Corner Bracket
(20) Field Perimeter Rubber Feet
(2) Sheet-Metal Driver Station Post
(2) Sheet-Metal Driver Station Attachment Bracket
(2) Sheet-Metal Driver Station Base Plate
(118) 1/4-20 x 1/2" Long Button Head Hex Screw
(52) 1/4-20 Nylock Nut
(8) 10-32 x 1/2" Long Flat Head Phillips Screw
(8) 10-32 Nylock Nut, 19, EA;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions - Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.
Headquarters U.S. Army Materiel Command
Office of Command Counsel-Deputy Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil
The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable.No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation Disclosures
The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award.Reporting During Contract PerformanceEqual Opportunity
KNOXUSACG2108 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum
8/27/21, 3:08 PM Drill Rifles
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is KnoxUSACCAJB0075 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 339930 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-02-22 13:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions.The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: 1903 Drill Rifle
Product shall meet the following specifications: 1. Overall length: 43.2 in +/- 0.1 in
2. Barrel length: 24 7/8 in. +/- 0.050 in. (measured from front edge of ejection port opening-based on 1903 A3/MK5 receiver)
3. Weight: 8.4 - 8.6 lbs.
4. Center of gravity: within +/- ½ inch along barrel axis of MK5 MOD1 dummy - use 23 1/16 inches from muzzle as reference (required) location measured with drill rifle resting upright on knife edge jut in front of floorplate.
5. Rifle Stock & Handguard: Injection molded with a Proprietary No Break rated Polypropylene resin comparable to the NGA (New Guard America) high impact stock.
6. Metal receiver is heat treated for added strength and laser etched with serial number
7. All exposed stock and hand guard contours shall appear visually to be in the same size and shape as the original 1903 A3 wooden stock components.
8. Minimum level of detail required for metal components includes representations of the following: Front Sight (no blade insert), Bayonet Stud Band( without bayonet lug), Floor plate/Trigger guard/Trigger (single unit or assembly) Read Sight (proper profile plus windage knob), Magazine Cut-off level (On-flag up position), Safety Lever (off/fire position-flag to left viewed from rear), Cocking Knob (fired position), Bolt handle/knob and cylindrical body (no safety lug or extractor representations required).
9. Articulated bolt action (slide/close) to allow visual inspection of breach to ensure no cartridge can be loaded.
**Prior to shipping, an email notification, shall be sent to the WAWF acceptor***
See Attachment for Shipping instructions, ALL EQUIPMENT FULFILLMENT AND SHIPMENT TO FINAL DESTINATION UNDER THIS CONTRACT SHALL OCCUR DURING THE PERIOD 1 April 2022 -15 June 2022 No Weekend or Holidays deliveries will be accepted., 528, EA;LI 002: Drill Rifle Sling: Must be compatible with 1903 Drill Rifle :Traditional 1-1/4 inch wide double hook adjustable :Black cotton or nylon material :One Nickel sling keeper
**Prior to shipping, an email notification, shall be sent to the WAWF acceptor***
See Attachment for Shipping instructions, ALL EQUIPMENT FULFILLMENT AND SHIPMENT TO FINAL DESTINATION UNDER THIS CONTRACT SHALL OCCUR DURING THE PERIOD 1 April 2022 -15 June 2022 No Weekend or Holidays deliveries will be accepted., 1138, EA;LI 003: Drill Rifle Rubber Butt Plate: :Must be compatible with 1903 Drill Rifle
:To protect floors during indoor drills, replace the existing plate of your 1903 Drill Rifle with this metal plate covered with 1cm of molded rubber
**Prior to shipping, an email notification, shall be sent to the WAWF acceptor***
See Attachment for Shipping instructions, ALL EQUIPMENT FULFILLMENT AND SHIPMENT TO FINAL DESTINATION UNDER THIS CONTRACT SHALL OCCUR DURING THE PERIOD 1 April 2022 -15 June 2022 No Weekend or Holidays deliveries will be accepted., 1227, EA;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions - Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.
Headquarters U.S. Army Materiel Command
Office of Command Counsel-Deputy Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil
The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/.
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable.No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation Disclosures
The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award.Reporting During Contract PerformanceEqual Opportunity
KnoxUSACCAJB0075 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum
2/15/22, 1:55 PM Hammer Strike Arcade Type Machine
This solicitation is for the procurement of 8 carnival/arcade type hammer strike machines by the Utah Army National Guard (UTARNG). The UTARNG has a requirement for these machines, which must meet detailed specifications provided in the attached documentation. Quotes will be evaluated on a Lowest Price Technically Acceptable (LPTA) basis, and the contract type will be Firm-Fixed Price. Quotes are due by 9:00 AM (Mountain) on September 2, 2024, and must include the vendor's CAGE code, UEIN, and contact information.
This procurement is designated as a total small business set-aside under NAICS code 713990, All Other Amusement and Recreation Industries, with a $9.0 million size standard. Only registered small businesses in SAM.gov under this or a similar NAICS code will be considered for award. The place of performance is Draper, Utah, and the UTARNG has a requirement to purchase 8 hammer strike machines for delivery within 90 days of award.
W911YP24R0030 Department of the Army Utah Army National Guard
8/1/24, 1:22 PM Sole Source Justification - Marine Travelift
Paragraph 1:
The General Services Administration (GSA) Federal Acquisition Service Assisted Acquisition Services Region 7 is issuing a sole source justification for the procurement of Marine Travelift Plan Bearings and Hydraulic Hose Assemblies. These proprietary parts are required for critical maintenance and repair of Marine Travelift Boat Hoists. The total estimated cost of the procurement is $80,796.76. The justification cites FAR 13.106(b)(1)/(2) and 13.501(a), which allow sole-source procurement when the required item is peculiar to one manufacturer. Award will be based on the submitted quotes, and delivery is required within 60 business days after receipt of order.
Paragraph 2:
This is an unrestricted procurement with no set-aside designations. Marine Travelift is the sole source for these parts, as they are the only manufacturer with the required drawings, specifications, materials, and tooling. The anticipated award amount is $80,796.76, and the place of performance is San Diego, CA 92136, USA.
42QSSC24Q0920 General Services Administration Federal Acquisition Service Assisted Acquisition Services Region 7
6/20/24, 3:07 PM VEX Robotics Kits
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is KnoxJGLB0003 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 339930 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-08-26 15:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Special Shipping Instructions.The MICC End User requires the following items, Brand Name Only (Exact Match), to the following: LI 001: Item 1 -
Robotics Package includes the following SKU numbers and all of the associated equipment as spelled out in the Statement of Work.
Delivery Address: Multiple Locations. Please see attached distribution list.
Competition Starter Kit (SKU# 276-7030)
VEX Spin Up Full Field & Game Element Kit (SKU # 276-7500)
VEX Competition Field Perimeter Kit (SKU# 276-8242)
VRC Anti-Static Full Field Tile Kits (SKU #276-6905)
V5 Competition Field Controller Cables (4-pack) (SKU # 276-7740), 48, EA;LI 002: V5 Smart Motor (SKU# 276-4840)
VEX V5 Smart Motor provides the following:
The V5 Smart Motors provide a powerful way to move robotic assemblies and they have built-in sensors which measure rotation, rotational speed, current draw, power, temperature, and torque, 192, EA;LI 003: VEX V5 Competition Starter Kit (SKU# 276-7030)
VEX V5 Competition Starter Kit includes the following items:
Electronics - (1) V5 Robot Brain; (1) V5 Controller; (1) V5 Robot Radio; (1) V5 Robot Battery Li-Ion 1100mAh; (1) V5 Robot Battery Cable; (1) V5 Robot Battery Charger; (4) V5 Smart Motors; (2) Bumper Switch v2; (3) 300mm Smart Cables; (1) 600mm Smart Cable; (1) 900mm Smart Cable; (1) USB A to Micro Cable
Motion - (1) V5 Claw Assembly; (4) 2.75" Wheels; (2) 4" Omni Wheel; (2) 4" Wheel; (5) 12T Metal Pinion; (4) 36T High Strength Gears; (4) 60T High Strength Gears; (5) 84T High Strength Gears; (5) 12T Metal Pinion Insert; (26) High Strength Gear Shaft Insert; (16) Free Spinning Gear Inserts; (4) 2" Shafts; (6) 3" Shafts; (1) 3.5" Shaft; (5) 4" Shafts; (4) 12" Shafts; (4) 6T High Strength Sprockets; (2) 12T High Strength Sprockets; (2) 18T High Strength Sprockets; (2) 24T High Strength Sprockets; (2) 30T High Strength Sprockets; (140) High Strength Chain Links; (20) Chain Attachment Links; (25) Tank Tread Traction Links; (30) Conveyor-belt Base Links; (12) Short Conveyor-belt Inserts; (10) Medium Conveyor-belt Inserts; (10) Tall Conveyor-belt Inserts
Structure - (3) 2x2x2x20 Aluminum U-Channels; (2) 1x2x1x15 Aluminum C-Channels; (4) 1x2x1x25 Aluminum C-Channels; (6) 1x2x1x35 Aluminum C-Channels; (2) 2x2x14x20 Aluminum Angles; (4) 2x2x25 Aluminum Angles; (2) 1x1x35 Aluminum Angles; (4) 5x25 Aluminum Plates; (4) 90-Degree Gussets; (25) Flat Bearing; (1) Pillow Block Bearing; (8) Drive Shaft Bar Locks; (23) Rubber Shaft Collar; (32) Shaft Collars; (6) 0x2 Connector Pin; (28) 1/8" Spacer; (20) 1/4" Spacers; (14) 3/8" Spacer; (13) 1/2" Spacer; (2) 7/8" Spacer; (25) #8-32 x 1/4" Locking Star Drive Screws; (29) #8-32 x 1/2" Locking Star Drive Screws; (4) #8-32 x 1.500" Locking Star Drive Screws; (50) #8-32 x 3/8" Star Drive Screws; (25) #8-32 x 1/2" Star Drive Screws; (27) #8-32 x 1.000" Star Drive Screws; (30) #8-32 Hex Nuts; (200) #8-32 Nylock Nuts; (35) 1-Post Hex Nut Retainer w/ Flat Bearings; (25) 1-Post Hex Nut Retainers; (27) 4-Post Hex Nut Retainers; (10) 1/2" Standoffs; (8) 1" Standoffs; (8) 2" Standoffs
Tools and Accessories - (2) #32 Rubber Bands; (2) V5 Battery Clips; (2) Open End Wrenches; (2) T8 Star Drive Keys; (100) 4" Zip Ties; (1) V5 Clawbot Instruction Manual, 15, EA;Solicitation and Buy Attachments***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time.The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal.The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions - Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea.IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management MaintenanceShipping is FOB Destination CONUS (CONtinental U.S.).New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED.Submitted Quotes will be valid for 45 days after the auction closing.This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site.The associated North American Industrial Classification System (NAICS) code
for this procurement can be found. The small business size
standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf"52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10,
Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government
Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006,
Prohibition On Storage And Disposal Of Toxic And Hazardous Materials;
252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material
inspection and receiving report"Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law.Wide Area WorkFlow Payment Instructions252.204-7012 Safeguarding of Unclassified Controlled Technical InformationAll deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E.IAW FAR 52.212-2; Evaluation - Commercial Items, the following factors shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price."No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an all-or-nothing basis.5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.
Headquarters U.S. Army Materiel Command
Office of Command Counsel-Deputy Command Counsel
4400 Martin Road
Rm: A6SE040.001
Redstone Arsenal, AL 35898-5000
Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil
The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/ .
If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures.Wide Area WorkFlow Payment InstructionsPlease address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582.In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product.
****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****Representation and Representation DisclosuresReporting During Contract Performance
KnoxJGLB0003 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum
8/19/22, 2:11 PM