Attachment_0024_-_Capabilities_and_Missions_By_Location_(West).pdf

W58RGZ-16-R-0271

Attachment 0024

21 December 2017

CAPABILITIES AND MISSIONS BY LOCATION

For

Aviation Field Maintenance (AFM) – West Region

Capabilities and Missions By Location (West)

21 December 2017 Page 2 of 7

Attachment 0024 Revision: 21 December 2017

Change History

Revision Changes 27 February 2017 Original Issue for RFP.

21 December 2017 Changed Attachment number to 0024

Changed Program Management location requirements in paragraph 2.1.

Removed the reference to Airframe Inspection Maintenance and Sustainment (AIMS) in paragraph 2.2 and 2.3.1.

Added locations to paragraph 2.4 Added additional sites to paragraph 6.

Capabilities and Missions By Location (West)

21 December 2017 Page 3 of 7

Table of Contents Page

1. Summary

2. Enduring Missions and Locations

3. Non-enduring Mission Locations

4. Back Shop Support by Location

5. PWS Requirements and Corresponding Locations

6. Collective Bargaining Agreements (CBA) Locations

7. Outside the Continental United States (OCONUS) Requirements by Location and Specific to Host Country/Nation

Capabilities and Missions By Location (West)

21 December 2017 Page 4 of 7

1. Summary

1.1. The purpose of this document is to support the Performance Work Statement (PWS) by identifying the capabilities and missions by location.

1.2. The Areas of Responsibility (AOR) are defined in Contract Attachment 0004 and will be used throughout this document.

1.3. Any changes to this document should be cross-referenced against the latest version of Contract Attachment 0004 Areas of Responsibility (AOR) to ensure accuracy.

2. Enduring Missions and Locations

2.1. Program Management Support to AFM (PWS paragraph 3.1.1)

2.1.1. Key Program Management positions shall be located in Huntsville, Alabama area to support AFM Government Headquarters staff.

2.1.2. Other Program Management positions shall be located with the Government Regional

Management or at a different CONUS site as described in the Comprehensive Management Plan (CMP).

2.2. Reset (PWS paragraph 3.2.3.1)

2.2.1. Ft. Hood, TX; Mission Design Series (MDS): AH-64, UH/HH-60L/M

2.2.2. Marine Corps Air Station Miramar (MCAS Miramar): San Diego, California; CH-53E

2.3. Modification Work Orders (MWO) (PWS paragraph 3.2.3.2)

2.3.1. MWO may be installed during Reset where the locations will align with those in paragraph 2.2.

2.3.2. MWO may also be installed on location of the aircraft by traveling “road” teams. These teams shall be based out of the locations identified in paragraphs 2.1 or 2.2.

2.3.3. Exceptions shall be provided by the Contractor to the COR for approval.

2.4. Combat Aviation Brigade (CAB) (Unit Support) (PWS paragraph 3.2.3.3)

2.4.1. Ft. Carson, CO

2.4.2. Joint Base Lewis-McChord (JBLM)

2.4.3. Ft. Hood, TX

2.4.4. Ft. Bliss, TX

2.4.5. Ft. Riley, KS

2.4.6. Ft. Wainwright, Alaska (Note: Not a current AFM location)

2.4.7. Wheeler Army Airfield, Hawaii (Note: Not a current AFM location)

2.4.8. Republic of Korea (Note: Not a current AFM location)

2.4.9. Japan (Note: Not a current AFM location)

2.5. Airframe Condition Evaluation (ACE) (PWS paragraph 3.2.3.6)

2.5.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

2.5.2. Exceptions shall be provided by the Contractor to the COR for approval.

2.6. UH-72A Light Utility Helicopter (LUH) (PM Support) (PWS paragraph 1.3)

2.6.1. National Training Center (NTC), Ft. Irwin, CA

2.6.2. Gypsum, CO

2.6.3. Kwajalein, Republic of the Marshall Islands

2.6.4. Laredo, Texas

Capabilities and Missions By Location (West)

21 December 2017 Page 5 of 7

2.6.5. Harlingen, Texas

2.6.6. White Sands, New Mexico

2.6.7. Yakima, Washington

2.6.8. Western ARNG Aviation Training Site (WAATS) Marana, Arizona

2.7. National Maintenance Program (NMP) (PWS paragraph 3.2.3.5)

2.7.1. Ft. Hood, TX

3. Non-enduring Mission Locations

3.1. Crash and Battle Damage (CBD), Battle Damage Assessment and Repair (BDAR) (PWS paragraph 3.2.3.11)

3.1.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.2. Fit Check (PWS paragraph 3.2.1.24)

3.2.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.3. SAFR Lite (PWS paragraph 3.2.3)

3.3.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.4. Pre-mobilization (Pre-MOB) & Mobilization (MOB) (PWS paragraph 1.3)

3.4.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.5. Leave-Behind Equipment (LBE) (PWS paragraph 1.3)

3.5.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.6. Port Operations (PWS paragraph 3.2.3.4)

3.6.1. These teams shall be based out of one of the locations identified in paragraphs 2.2 or 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.7. Foreign Military Sales (FMS) (PWS paragraph 3.2.3.14)

3.7.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.8. Pass-back maintenance or Multinational Force and Observers (MFO) (PWS paragraph 1.3)

3.8.1. None Identified.

3.9. Non-enduring field and sustainment maintenance mission support (PWS paragraph 3.2) at location identified in Attachment 0004 Areas of Responsibility.

Capabilities and Missions By Location (West)

21 December 2017 Page 6 of 7

4. Back Shop Support by Location

AFM West Back Shop Support Ft.

Hood Ft.

Carson Ft.

Riley Ft.

Bliss Ft.

Lewis Blade Repair (3.2.4.4) X X L L X Blade Dryer FEDS Capability (3.2.4.13) X X Powertrain (3.2.4.14) X L L L X Machine/Welding Shop (3.2.4.5, 3.2.4.6) X X L L X Airframe (Sheet metal) Repair (3.2.4.4) X X L L X Hydraulic Shop (3.2.4.2) X X L L X Avionics/Electrical Shop (3.2.4.8) X X L L X ALSE Shop (3.2.4.9) X Fabric/Upholstery Repair (3.2.4.7) X Aircraft Survivability Equipment (ASE) Repair (3.2.4.8.2)

Battery Shop (3.2.4.11) Aircraft/Armament Capability (3.2.4.10) X X Aircraft Instrumentation Capability (3.2.4.9) Paint and Strip Capability (3.2.4.12) X L L L Component Repair (3.2.4.1) X Engine Specialized Repair Activity (ESRA) (3.2.4.3)

X – Capabilities exist at this location.

L – Capabilities are limited at this location.

5. PWS Requirements and Corresponding Locations

5.1. STAMIS Field Support (PWS paragraph 3.1.9.1.2)

5.1.1. These skill sets shall be located at each of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

5.2. Site Supervision (PWS paragraph 3.2.1.2)

5.2.1. These skill sets shall be located at each of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

5.3. Support for Maintenance Test Flight Operations (PWS paragraph 3.2.1.9)

5.3.1. These skill sets shall be located at each of the locations identified in paragraph 2.2 and correspond with the MDS for those locations. Exceptions shall be provided by the Contractor to the COR for approval.

5.4. Chief Pilot (PWS paragraph 3.1.2)

5.4.1. This skill set shall be located at one of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.5. Maintenance Test Pilot by MDS (PWS paragraph 3.2.1.9.2)

5.5.1. These skill sets shall be located at each of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.6. Operating onsite machining equipment (PWS paragraph 3.2.4.5)

Capabilities and Missions By Location (West)

21 December 2017 Page 7 of 7

5.6.1. These skill sets shall be located at Fort Hood, TX. Exceptions shall be provided by the Contractor to the COR for approval.

5.7. Welding personnel (PWS paragraph 3.2.4.6)

5.7.1. These skill sets shall be located at each of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

5.8. ALSE shop leadership and ALSE Technicians (PWS paragraph 3.2.4.9.1)

5.8.1. These skill sets shall be located at each of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

5.9. Site Safety Specialist (SSS) (PWS paragraph 4.2.2)

5.9.1. This skill set shall be located at each location identified in paragraph 2.4.

5.9.2. Exceptions shall be provided by the Contractor to the COR for approval.

5.10. Additional Duties Safety Officer (ADSO) (PWS paragraph 4.2.3)

5.10.1. This skill set shall be located at each location identified in paragraphs 2.3.2 and 2.4.

5.10.2. Exceptions shall be provided by the Contractor to the COR for approval.

5.10.3. As new non-enduring missions and locations occur, the Contractor shall ensure coverage by ADSO until a SSS is assigned permanently.

5.11. STAMIS (PWS paragraph 3.1.9.10)

5.11.1. None identified.

5.12. Contractor’s OCONUS Supervision (PWS paragraph 3.1.1.10)

5.12.1. Contractor’s OCONUS Supervision shall be collocated with the Government Regional

Management cell.

6. Collective Bargaining Agreements (CBA) Locations

6.1. Joint Base Lewis-McChord (JBLM)

6.2. Ft. Carson, CO

6.3. National Training Center (NTC), Ft. Irwin, CA

6.4. White Sands Missile Range (WSMR), New Mexico

7. Outside the Continental United States (OCONUS) Requirements by Location and Specific to Host Country/Nation

7.1. Republic of Korea (Note: Not a current AFM location)

7.2. Japan (Note: Not a current AFM location)

7.3. Alaska (Note: Not a current AFM location)

7.4. Hawaii (Note: Not a current AFM location)

3.9. Non-enduring field and sustainment maintenance mission support (PWS paragraph 3.2) at location identified in Attachment 0004 Areas of Responsibility.