Attachment_0007_-_AFM__Skill_Classification_Crosswalk_(West).xlsx

Instructions

CONUS LCAT Crosswalk

Aerospace Structural Welder Performs fusion welding on aircraft and ground support equipment to a qualified Welding Procedures Specification (WPS), performs structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders. Required to read and understand engineering drawings and welding symbols, fabricates manufacture-welded parts from engineering drawing without direct supervision, performs fusion welding and torch brazing for ground support equipment, ensuring the procedure is completed per the requirements of the national welding and brazing codes and specifications. Welds a wide variety of materials such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels. The incumbent is required to have knowledge of the materials to select the correct filler materials and shielding gas when generating the Weld Procedure Specification (WPS), and produce flight critical welds and assist in the development process of generating Weld Procedure Specifications as mandated by welding codes and specifications. Determines the sequence of welding in order to prevent or reduce the amount of warp to the weld, designs and fabricates weld holding fixtures as necessary to perform individual welding projects, performs pre-heat and post weld stress relief operations, maintains weld records. May perform duties as a Qualified Weld Inspector by inspecting own welds and those of less qualified welders, and may perform duties such as training and re-certification in the various welding processes. As defined in Attachment 0013, Welding Personnel.

Aircraft Mechanic Helper Assists Aircraft Mechanic in servicing, repairing and overhauling aircraft and aircraft engines, performing any combination of the following duties: adjusts and replaces parts such as control cables, fuel tanks, spark plugs, tires, batteries and filters, using mechanic's tools, removes inspection plates, cowling, engine covers, floor boards and related items to provide access for inspection and repair, and replaces items when work is completed, assists in towing and jacking aircraft, and disconnects instruments, ignition systems, and fuel and oil lines. This mechanic assists in dismantling, repairing, overhauling or replacing parts and assemblies such as engines, plumbing and hydraulic systems, and aircraft structural sections, performs routine duties such as furnishing materials, tools and supplies to mechanic; lifting and holding materials in place during operation; cleaning work areas and machines, tools and equipment, cleans aircraft, interior and exterior parts and assemblies with solvents or other cleaning solutions, assists in jacking and towing aircraft; Inflates tires, fills gasoline tanks and oil reservoirs, and greases aircraft, using grease gun, and may assist flight line mechanic, worker, or servicer in servicing and repairing aircraft prior to flight.

Aircraft Mechanic I Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Safely prepares aircraft for inspections and maintenance checks and services. Performs scheduled inspections and assists in performing special inspections. Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment. Mechanic applies comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Uses a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Uses a knowledge of electrical theory and of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Participates in maintenance test flights and operation checks as required. Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records. Receives technical assistance, as required, from higher-level technician. As defined in Attachment 0013, Aircraft Mechanic I.

Aircraft Painter Coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper. Smoothes surface with sandpaper and steel wool roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and paint insignia, letters or numerals on aircraft surface, using stencils.

Aircraft Servicer Services aircraft, performing any combination of the following tasks, directs incoming and outgoing aircraft near terminal or flight line parking area to assist pilot's maneuvering of the aircraft on ground, using hand or light signals or drives light truck with guiding sign, and secures aircraft in parking position with blocks, stakes, and tie downs. Performs the following tasks: operates service vehicles to replenish fuel, oil, water, waste system chemicals, oxygen, hydraulic fluid, and to remove waste, enters in the maintenance records description of the servicing performed, checks for fuel contamination by draining sumps and fuel drains; operates ground support equipment such as electrical power supply and engine starting units, examines tires for specified air pressure and condition, assists in jacking and towing aircraft, removes and replaces defective tires, positions and removes boarding platforms to unload or load aircraft passengers, unloads and loads luggage and cargo, using tow truck with luggage carts, and cleans exterior or interior of aircraft, using portable platform ladders, brushes, rags, water hose, and vacuum. The Aircraft Servicer may de-ice aircraft wings and assemblies load and unload containers of food, beverages, and dishes for in-flight meal services, trace lost luggage for customers and prepare lost baggage claims, and install drag chutes or retrieve them and send them to parachute shop for repacking.

Aircraft Technical Inspector Plan and conduct aircraft technical inspections. Inspect power plant hot section, cold section, and accessory modules. Operate and inspect pneudraulic systems including landing gear. Understand the fundamentals and inspection techniques of helicopter structural repairs. Perform troubleshooting and analyze electrical/electronic systems. Compute basic aircraft weight and balance data to include adjustments. Lectures, demonstrations, and practical exercises in inspection techniques, procedures, performance evaluation, and operational checks on the power plant, structure, and systems of helicopters trains. Evaluate the technical training program; provide technical guidance to repairers performing aircraft and subsystem maintenance on maintenance techniques and safety procedures. Check airplane flight and maintenance records to determine adherence to prescribed maintenance standards. Maintains technical library; inspect systems, subsystems, and components according to applicable technical publications and checklists before, during, and after airplane maintenance and modifications. Check and troubleshoot systems. Participate in maintenance test flights. Annotate records of required maintenance. Evaluate operational readiness of airplanes and recommends corrective action. Inspect crash-damaged airplanes and estimates time, parts, and costs to repair. Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring and diagnostic calibration. Evaluate maintenance operations and facilities for compliance with directives, technical manuals, work standards, safety procedures, and operational policies. Performs maintenance trend analysis and applies production control, quality control and other maintenance management principles and procedures to aircraft maintenance operations. As defined in Attachment 0013, Technical Inspector.

Aircraft Worker Makes repairs to aircraft following orders of higher grade worker, assists in troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems, removes, cleans, reinstalls, or replaces defective parts, accessories, and components such as worn gaskets, couplings, and fittings, bad actuators, accumulators, gauges, sections of corroded fuel and oil lines, This worker may supervise the jacking and towing of aircraft, makes adjustments and settings such as cable tension and seat movement settings and adjustments; obtains standard parts such as fuel and oil line connections and fittings, cable linkage, and spark plug cables and harnesses by referring to parts manuals and by making comparisons with samples, may perform pre-flight, thru-flight, and post-flight maintenance inspections, enter in the maintenance records description of the work performed, and services engines and aircraft components at line station making repairs, short of overhaul required to keep aircraft in safe operating condition.

Aviation Life Support Equipment (ALSE) Technical Inspector Perform all inspections and replacement of individual components of the ALSE. Maintain ALSE shop, supplies and equipment. Repair aircraft seat covers, webbing, and soundproofing blankets with shop equipment. Maintain equipment for mission requirements as directed. As defined in Attachment 0013, Aviation Life Support Equipment (ALSE) Technical Inspector.

Aviation Life Support Equipment (ALSE) Technician Maintains Aircrew Flight Equipment (AFE) for aircrew to assure the proper maintenance and operations aboard aircrafts. Ensures the maintenance inspection repair and proper use of various life support equipment for the safety of Aircrew personnel as well as the passengers aboard the aircraft in the case of an emergency situation. As defined in Attachment 0013, Aviation Life Support Equipment (ALSE) Technician.

Avionics Technician Perform maintenance checks on aircraft flight controls, stabilization systems, avionics and controlled cryptographic equipment. Maintain common/special tools and equipment. Troubleshoot equipment and diagnose repairs. Maintain shop and bench stock for aircraft avionics equipment. Maintain and test of avionics and electrical systems with integration of complex software and hardware, including electrical power generation and distribution systems, integrated avionics systems and displays, communication and navigation systems, mission equipment integration, sensors and vehicle health monitoring systems.

Computer Operator II Processes scheduled routines that present few difficult operating problems (e.g., infrequent or easily resolved error conditions). In response to computer output instructions or error conditions, this worker applies standard operating or corrective procedure, refers problems that do not respond to preplanned procedure, and may serve as an assistant operator, working under general supervision.

Computer Operator III Processes a range of scheduled routines. In addition to operating the system and resolving common error conditions, this worker diagnoses and acts on machine stoppage and error conditions not fully covered by existing procedures and guidelines (e.g., resetting switches and other controls or making mechanical adjustments to maintain or restore equipment operations). In response to computer output instructions or error conditions, the Computer Operator III may deviate from standard procedures if standard procedures do not provide a solution and refers problems which do not respond to corrective procedures to a person of supervisory or higher individual contributor level.

Computer Operator IV Adapts to a variety of nonstandard problems that require extensive operator intervention (e.g. frequent introduction of new programs, applications, or procedures). In response to computer output instructions or error conditions, this worker chooses or devises a course of action from among several alternatives and alters or deviates from standard procedures if standard procedures do not provide a solution (e.g. reassigning equipment in order to work around faulty equipment or transfer channels); then refers problems if necessary. Typically, completed work is submitted to users without supervisory review.

Computer Operator V Resolves a variety of difficult operating problems (e.g. making unusual equipment connections and rarely used equipment and channel configurations to direct processing through or around problems in equipment, circuits, or channels or reviewing test run requirements and developing unusual system configurations that will allow test programs to process without interfering with ongoing job requirements). In response to computer output instructions and error conditions or to avoid loss of information or to conserve computer time, operator deviates from standard procedures. Such actions may materially alter the computer unit's production plans. This operator may spend considerable time away from the control station providing technical assistance to lower level operators and assisting programmers, systems analysts, and subject matter specialists with resolution of problems.

Computer Programmer III Applies standard programming procedures and detailed knowledge of pertinent subject matter in a programming area such as a record keeping operation (supply, personnel and payroll, inventory, purchasing, insurance payments, depositor accounts, etc.); a well-defined statistical or scientific problem; or other standardized operation or problem. Works according to approved statements of requirements and detailed specifications. While the data are clear cut, related, and equally available, there may be substantial interrelationships of a variety of records and several varied sequences of formats are usually produced. The programs developed or modified typically are linked to several other programs in that the output of one becomes the input for another. Recognizes probable interactions of other related programs with the assigned program(s) and is familiar with related system software and computer equipment, and solves conventional programming problems, (In small organizations, may maintain programs that concern or combine several operations, i.e. users, or develop programs where there is one primary user and the others give input.) Performs such duties as developing, modifying, and maintaining assigned programs, designing and implementing modifications to the interrelation of files and records within programs in consultations with higher level staff. Monitors the operation of assigned programs and responds to problems by diagnosing and correcting errors in logic and coding; implements and/or maintains assigned portions of a scientific programming project, applying established scientific programming techniques to well-defined mathematical, statistical, engineering, or other scientific problems usually requiring the translation of mathematical notation into processing logic and code. (Scientific programming includes assignments such as: using predetermined physical laws expressed in mathematical terms to relate one set of data to another; the routine storage and retrieval of field test data, and using procedures for real-time command and control, scientific data reduction, signal processing, or similar areas.) Tests, documents work, writes and maintains operator instructions for assigned programs, and confers with other EDP personnel to obtain or provide factual data. May carry out fact-finding and programming analysis of a single activity or routine problem, applying established procedures where the nature of the program, feasibility, computer equipment, and programming language have already been decided. Job tasks may require the incumbent to analyze present performance of the program and take action to correct deficiencies based on discussion with the user and consultation with and approval of the supervisor or higher-level staff. May assist in the review and analysis of detailed program specifications, and in program design to meet changes in work processes. Works independently under specified objectives; applies judgment in devising program logic and in selecting and adapting standard programming procedures, resolves problems and deviations according to established practices, and obtains advice where precedents are unclear or not available. May guide or instruct lower level programmers; supervise technicians and others who assist in specific assignments, works on complex programs under close direction of higher level staff or supervisor, and may assist higher level staff by independently performing moderately complex tasks assigned, and performing complex tasks under close supervision. Work at a level above this is deemed Supervisory or Individual Contributor. Completed work is reviewed for conformance to standards, timeliness, and efficiency.

Computer Programmer IV Applies expertise in programming procedures to complex programs; recommends the redesign of programs, investigates and analyzes feasibility and program requirements, and develops programming specifications. Assigned programs typically affect a broad multi-user computer system which meets the data processing needs of a broad area (e.g., manufacturing, logistics planning, finance management, human resources, or material management) or a computer system for a project in engineering, research, accounting, statistics, etc. Plans the full range of programming actions to produce several interrelated but different products from numerous and diverse data elements, which are usually from different sources; solves difficult programming problems, and uses knowledge of pertinent system software, computer equipment, work processes, regulations, and management practices. Performs such duties as: developing, modifying, and maintains complex programs; designs and implements the interrelations of files and records within programs which will effectively fit into the overall design of the project; works with problems or concepts and develops programs for the solution to major scientific computational problems requiring the analysis and development of logical or mathematical descriptions of functions to be programmed; and develops occasional special programs, e.g. a critical path analysis program to assist in managing a special project. Tests, documents, and writes operating instructions for all work, confers with other EDP personnel to secure information, investigate and resolve problems, and coordinates work efforts. In addition, performs such programming analyses as: investigating the feasibility of alternate program design approaches to determine the best balanced solution, e.g., one that will best satisfy immediate user needs, facilitate subsequent modification, and conserve resources. Duties include the following: assisting user personnel in defining problems or needs, determining work organization on typical maintenance projects and smaller scale, working on limited new projects, the necessary files and records, and their interrelation with the program or working on large or more complicated projects, and participating as a team member along with other EDP personnel and users, holding responsibility for a portion of the project. Works independently under overall objectives and direction, apprising the supervisor about progress and unusual complications and modifying and adapting precedent solutions and proven approaches. Guidelines include constraints imposed by the related programs with which the incumbent's programs must be meshed. Completed work is reviewed for timeliness, compatibility with other work, and effectiveness in meeting requirements. May function as team leader or supervise a few lower level programmers or technicians on assigned work.

Computer Systems Analyst I Initial assignments are designed to expand practical experience in applying systems analysis techniques and procedures. Provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment. Carries out fact finding and analyses as assigned, (usually of a single activity or a routine problem); applies established procedures where the nature of the system, feasibility, computer equipment and programming language have already been decided; may assist a higher level systems analyst by preparing the detailed specifications required by a computer programmers from information developed by the higher level analyst, and may research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents. When cost and deadline estimates are required, results receive closer review. The supervisor defines objectives, priorities, and deadlines. Incumbents work independently; adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available. Completed work is reviewed for conformance to requirements, timeliness, and efficiency. May supervise technicians and others who assist in specific assignments. Work at a level above this is deemed Supervisory or Individual Contributor.

Computer Systems Analyst II Applies systems analysis and design skills in an area such as a record keeping or scientific operation. A system of several varied sequences or formats is usually developed, e.g. the analyst develops systems for maintaining depositor accounts in a bank, maintaining accounts receivable in a retail establishment, maintaining inventory accounts in a manufacturing or wholesale establishment, or processing a limited problem in a scientific project. Requires competence in most phases of system analysis and knowledge of pertinent system software and computer equipment and of the work processes, applicable regulations, workload, and practices of the assigned subject-matter area. Job duties require the incumbent to be able to recognize probable interactions of related computer systems and predict impact of a change in assigned system. Reviews proposals which consist of objectives, scope, and user expectations; gathers facts, analyzes data, and prepares a project synopsis which compares alternatives in terms of cost, time, availability of equipment and personnel, and recommends a course of action; upon approval of synopsis, prepares specifications for development of computer programs. Duties also include the ability to determine and resolve data processing problems and coordinate the work with program, users, etc. This worker orients user personnel on new or changed procedures, may conduct special projects such as data element and code standardization throughout a broad system, working under specific objectives and bringing to the attention of the supervisor any unusual problems or controversies. Works independently under overall project objectives and requirements, and apprises supervisor about progress and unusual complications. Guidelines usually include existing systems and the constraints imposed by related systems with which the incumbent's work must be meshed. This worker adapts design approaches successfully used in precedent systems, works on a segment of a complex data processing scheme or broad system, as described for Computer Systems Analyst, level III, works independently on routine assignments and receives instructions and guidance on complex assignments. Work is reviewed for accuracy of judgment, compliance with instructions, and to insure proper alignment with the overall system. Completed work is reviewed for timeliness, compatibility with other work, and effectiveness in meeting requirements. May provide functional direction to lower level assistants on assigned work.

ECO / Hazmat Technical Inspector Plans and carries out an itinerary of periodic inspections of the handling of hazardous materials. Inspects shipment containers for compliance with applicable hazardous materials regulations and safety appliance standards. Conducts investigations of unintentional releases of hazardous materials, or other accidents/incidents resulting in serious injury to person(s) or to property. Determines probable cause of accident or incident and if regulations were violated. Develops comprehensive reports (e.g., accident, incident, and notices of probable violation) which outline findings and recommendations.

Electrician, Maintenance Performs a variety of electrical trade functions such as the installation, maintenance, or repair of equipment for the generation, distribution, or utilization of electric energy. Work involves most of the following: installing or repairing any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment; working from blueprints, drawings, layouts, or other specifications, locating and diagnosing trouble in the electrical system or equipment, working standard computations relating to load requirements of wiring or electrical equipment, and using a variety of electrician's hand tools and measuring and testing instruments. In general, requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

Electronics Technician Maintenance I Applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. This person works under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy.

Electronics Technician Maintenance II Applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers' manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician.

Electronics Technician Maintenance III Applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers' manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering; changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower level technicians

Flight Engineer Applies knowledge and skills concerned with all primary aircraft systems critical to the performance of the aircraft, inspects the aircraft prior to takeoff for defects such as fuel or oil leaks and malfunctions in electrical, avionics, onboard computers, hydraulic or pressurization systems according to preflight checklist, and inspects aircraft interior, and exterior to include engines, fuselage and control surfaces for mechanical and structural soundness and proper operation to determine aircraft airworthiness. As applicable, loads flight data into computers, entering present position and aligning all inertial platforms on an aircraft without a navigator position, verifies passenger and cargo distribution and amount of fuel to ensure that weight and balance specifications are met, reviews aircraft maintenance documentation and ensures maintenance status complies with command operating restrictions and flight manual. Coordinates with aircraft maintenance personnel to ensure availability of aircraft, determines takeoff, in-flight and landing data based on terrain, runways, and weather conditions and aircraft weight/configuration. Assists pilot with engine starting and ground operations, and advises on engine performance and computes critical speeds and time/distance checks including the ability to extract course data and calculate estimated time of arrival. Monitors departure procedures, routing and altitude clearances, and is responsible for assisting the pilot in the operation of primary aircraft systems (propulsion, airframe, and electrical, hydraulic, environmental, aerial delivery and air defense systems). During all aircraft operations, monitors engine and aircraft system performance, analyzes instrument readings and identifies abnormal indications or system malfunctions, adjusts aircraft engine controls in-flight to ensure proper aircraft performance, and observes warning indicators and lights for fire, overheat, depressurization, radar and other systems as required by the flight manual. Operates built-in-test and troubleshooting systems, records fuel consumption, range, and in-flight performance data, and maintains records and forms covering fuel consumption and engine performance, flights, repairs, maintenance, inspections and service. Accomplishes simultaneous, multiple aerial refueling operations including the knowledge and skill to operate the aerial refueling boom and hose drogue assembly/controls to safely affect refueling contact between the tanker and multiple receiver aircraft. During rendezvous, directs receiver aircraft into contact position and advises receiver pilots of actions require maintaining a safe position. During contact, monitors instruments and observes multiple receiver aircraft for sudden or abnormal changes in position and tail boom/wing drogue refueling connections via use of closed circuit TV. In the event of aerial refueling boom system or computer failures, directs receiver aircraft pilots and uses all available means to prevent aircraft collision. May compute holding, orbit, minimum air refueling, and overrun speeds and analyzes data to determine abort procedures and emergency landing sites. Makes in-flight repairs such as replacing fuses, adjusting instruments, freeing jammed control cables and takes emergency measures to compensate for failure of equipment such as auto-pilot, wing heaters and electrical and hydraulic systems, and record malfunctions which were not corrected during flight and reports needed repairs to ground maintenance personnel.

Fuel Distribution System Operator/Fuel Handler Receives, stores, transfers, and issues fuel through pipelines at main line or terminal stations, receives fuel by tanker, ships fuel by pipeline, tank car, tank truck, and barge, prepares and checks receiving or ship's documents, connects lines, grounding wires, and loading and offloading arms or hoses to pipelines; and visually inspects samples of fuel, and checks gravity and flashpoint. This operator gauges tanks for water, temperature, and fuel levels, checks pumping systems for correct operating pressure or unusual noises, performs preventive maintenance and repairs on terminal systems, assists in maintenance of government-owned railroad loading and switch area, performs general housekeeping and grounds maintenance for terminal, pipeline and dock areas. As defined in Attachment 0013, Fuel Handler.

General Clerk III Uses some subject-matter knowledge and judgment to complete assignments consisting of numerous steps varying in nature and sequence. The General Clerk III selects from alternative methods and refers problems not solvable by adapting or interpreting substantive guides, manuals, or procedures. Typical duties include: assisting in a variety of administrative matters; maintaining a wide variety of financial or other records (stored both manually and electronically); verifying statistical reports for accuracy and completeness; compiling information; and handling and adjusting complaints.

Ground Inspector All the duties listed for Ground Support Equipment (GSE) Mechanic. All the duties listed for Aircraft Technical Inspectors (TI). Inspect all GSE assigned.

Ground Support Equipment Mechanic Diagnoses malfunctions and repairs Ground Support Equipment (GSE), advises and trains lower grade workers on diagnosis and repair of less complex repair/maintenance problems, inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications; uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnosis, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools.

Librarian Maintains library collections of books, serial publications, and documents, audiovisual and other materials and assists groups and individuals in locating and obtaining materials, furnishes information on library activities, facilities, rules and services, explains and assists in use of reference sources, such as card or book catalog, or book and periodical indexes to locate information. This worker issues and receives materials for circulation or use in library, assembles and arranges displays of books and other library materials, maintains reference and circulation materials. The Librarian also answers correspondence on special reference subjects, may compile list of library materials according to subjects or interests, and may select, order, catalog and classify materials.

Logistics/Materiel Coordinator Monitor and provide supply support. Analyze the Authorized Project Stockage Levels (APSL) and recommend revision of stockage level in support of Mission, Type, and Design Series (MDS) specific fleets. Expedite the flow of material, parts and assemblies between departments in accordance with production schedules. Ensure proper logistics support is maintained and problems identified

Machinist, Maintenance Produces replacement parts and new parts in making repairs of metal parts of mechanical equipment. Work involves most of the following: interpreting written instructions and specifications, planning and laying out of work, using a variety of machinist's hand tools and precision measuring instruments, setting up and operating standard machine tools. This incumbent is responsible for the shaping of metal parts to close tolerances, making standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining; knowledge of the working properties of the common metals, selecting standard materials, parts, and equipment required for this work; and fitting and assembling parts into mechanical equipment. In general, the machinist's work normally requires a rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.

Maintenance Manager Serves as the Regional Maintenance Manager with responsibility for planning, managing, and directing the activities of the aviation maintenance mission which include repair, rebuild, fabrication, and/or modification of major end items and secondary items (e.g. engines, transmissions, rotor heads, Flexible Engine Test Stands (FEDS), rotor blades associated with complex rotary wing aircraft systems) for the supported units within area of operations. Interfaces with supported unit’s maintenance managers, Company Commanders, and Government staff to balance priorities and workload according to mission requirements. Uses extensive knowledge of rotary wing aviation maintenance, back shop operations, and procedures in the U.S. Army and Host Nation environment to independently coordinate and integrate contractor personnel to accomplish the PWS Aviation Sustainment mission. Acts as regional focal point for rotary wing aviation support and is responsible for managing the maintenance and repair of aircraft weapon systems and its engines, airframes and components in an efficient and effective manner and for resolving problems or notifying Government within its directed mission. Plans, schedules and coordinates work operations for accomplishment by contractor personnel assigned to the activity within schedules and priorities established. Analyzes work schedules, determines manpower, equipment and material requirements taking into consideration the occupations involved, availability of manpower and equipment, deadlines and other work projects assigned. Rearranges work schedules and locations to accommodate mission readiness requirements or lack of required parts and equipment. Meets with management officials and Government representatives on a regular basis to provide information regarding progress on projects, discuss issues and recommend solutions to resolve problems. Schedules meetings to keep abreast of accomplishing schedules within appropriate time frames, manpower and materials problems, etc. Coordinates with appropriate personnel to provide information or to obtain required support services such as facilities, security, transportation, etc. Attends process reviews, meetings, etc., making needed technical contributions for the implementation of policies, procedures, and techniques which will satisfy operational requirements. Provides formal and informal status of assigned projects to support new programs and other data of interest to the Government. As defined in Attachment 0013, Logistics Management Coordinator.

Maintenance Test Pilot Perform test flights to demonstrate aircraft proficiency. Interpret meteorological data as it pertains to filing a flight plan for the navigational course of flight needed for a mission or sortie. File flight plans for all flights using authorized navigational processes. Compute weight and balance logs for the aircraft being flown. Initiate and complete all military flight or maintenance forms to document maintenance test flight completion and discrepancies. Perform Aviation Safety Official duties as directed. Communicate, troubleshoot, advise and work side by side with military pilots and technicians. Aircraft Technical Inspection, see paragraph 5 Aircraft Technical Inspectors (TI). Chief pilot duties as designated by the Site Supervision. Perform Aviation Safety Official duties. Ferry flights as assigned. As defined in Attachment 0013, Maintenance Test Pilots.

Motor Vehicle Mechanic As per SCA for Motor Vehicle Mechanic (05190), see paragraph 1. Also, washing, cleaning, and lubricating vehicles and other preventative maintenance; loading, unloading, and storing automotive parts and supplies; and maintaining work areas.

Non-Destructive Inspection (NDI) Quality Inspector As per SCA for Quality Control Inspector (99610), see paragraph 1. Inspects sub-assembly and final assembly hardware following engineering requirements.