Navy Coat Mens pgc02891_nctrf29107v3.pdf

PGC 002891 COAT, MAN'S, DRESS, POLYESTER/WOOL, GABARDINE

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL

AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE

MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT

INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

SHALL BE MADE IN ACCORDANCE WITH NCTRF PD-29107 DATED 1 July 2012

PATTERN DATE: 21 April 2009

STANDARD SAMPLE FOR POLYESTER/WOOL GABARDINE,

BLUE SHADE 3346, CONFORMING TO TYPE II,

CLASS 12 OF MIL-DTL-10176 DATED 11 MARCH 1998

IS AVAILABLE UNDER PIECE NUMBER 17267

INTERIM CHANGES TO NCTRF PD-29107:

PAGE 2, PARA. 2.2.1, UNDER "DEPARTMENT OF DEFENSE

SPECIFICATION"

ADD THE FOLLOWING: "MIL-C-44192 -

CONTAINER, SHIPPING AND STORAGE, COAT (HANGER

PACK)".

PAGE 5, PARAGRAPH 3.3.6.2. AT END OF PARAGRAPH ADD:

AS AN ALTERNATE, A NON-WOVEN FUSIBLE INTERLINING

CONFORMING TO TYPE VI, CLASS 1, STYLE B OF MIL-

C-44296, OR STYLE NO. T3G WEFT INSERTED KNIT

CHARCOAL OR BLACK MAY BE USED."

PAGE 9, PARAGRAPH 3.3.14.3.1, After PARAGRAPH 3.3.14.3 insert the following:

"3.3.14.3.1, Exclusive Label. Each coat shall contain the Exclusive label. The jacquard woven Exclusive label shall incorporate the DLA Logo (attached) and shall specify "Made exclusively for Defense Logistics Agency" and shall include "by" and the contractor's name. The label shall be positioned sewn above the inside left pocket and centered above the pocket opening. Label shall be approximately 2 inches square and sewn on all four sides. The proposed finished label's design shall be submitted to the contracting officer for approval."

PAGE 9, PARAGRAPH 3.3.14.4 AT END OF PARAGRAPH ADD:

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE

(UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE

LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

PAGE 18, ADD AFTER OPERATION 7B,

. "OR

AS AN ALTERNATE, WHEN USING S SLEEVE LINING,

FELLLING MACHINE(SEE 6.7), JOIN BACKARM SEAM OF

SLEEVE LINING.THE DISTANCE BETWEEN THE NOTCHES

ON THE FOREARM SEAM SHALL BE LEFT OPEN.

. 301 OR SSA-1 10-14

. 401 OR SSA-1 10-14

POSITION THE SLEEVE LINING TOP NOTCHES TO THE

TOP OF FOREARM SLEEVE SEAM AND TOP OF THE BACK-

ARM SLEEVE HEM. TACK FOREARM SLEEVE AND BACKARM

SEAM OF THE SLEEVE LINING TO THE FOREARM SEAM

SEAM, RESPECTIVELY. THE BACKARM SEAM TACKING

SHALL EXTEND FROM APPROXIMATELY THE MIDPOINT OF

OF THE BACKARM SEAM TO NOT MORE THAN 6 INCHES

ABOVE CREASED BOTTOM EDGE. THE FOREARM SEAM

TACKING SHALL BE FOR A DISTANCE OF 1-1/2 TO 2

INCHES BELOW THE BOTTOM LEFT OPEN FOREARM SEAM

NOTCH.

HAND OR 2-3

301 4-8"

PAGE 25, TABLE I, OPERATIONS 15B-G, DELETE

ENTIRELY AND SUBSTITUTE:

"B. POSITION POCKET WELT AND FACING PIECE ON

INSIDE BREAST POCKET MATCHING FOLD LINES. TURN

UNDER EDGES OF WELT AND FACING PIECE 1/4 TO 3/8

INCH AND STITCH 1/8 INCH FROM FOLDED EDGE.

SELVAGE NEED NOT BE TURNED UNDER. TOP EDGE OF

THE IDENTIFICATION AND SIZE LABEL SHALL BE

CENTERED, INSERTED, AND CAUGHT UNDER THE EDGE OF

THE POCKET WELT. PRINTING ON LABEL SHALL NOT BE

OBSCURED. STITCH THE REMAINING THREE SIDES OF

THE LABEL TO POCKETING. LABEL SHALL BE LOCATED

ON THE POCKET PLY NEXT TO THE COAT FRONT.

301 LSD-1 10-14

. OR

C. AS AN ALTERNATE, STITCH THE FOUR SIDES OF THE

LABEL TO POCKET PICES WITH THE TOP EDGE OF LABEL

OVERLAPPING POCKET WELT.

301 LSBJ-1 10-14

D. POSITION POCKET ASSEMBLY ON FACING/LINING

ASSEMBLY WITH INSIDE BREAST POCKET STAY CENTERED

ON UNDERSIDE OF FACING/LINING ASSEMBLY ACCORDING

TO POCKET MARKS ON PATTERNS, FORMING 3/16 INCH

WELTS. STITCH AROUND POCKET MARKS, MAKING A

5-1/4 INCH POCKET OPENING.

301 SMLR TO 10-14

. LSBT-1(A)

E. CUT OPENING OF POCKET THROUGH POCKET FACING/

LINING ASSEMBLY AND STAY PIECE MIDWAY BETWEEN

THE TWO ROWS OF STITCHING. TONGUE NOTCH THE ENDS

OF OPENING AND TURN POCKET PIECE THROUGH OPENING

F. FORM BOTTOM WELT BY TURNING SEAM ALLOWANCE UP

INTO IT AND TOPSTITCH BOTTOM WELT WITH OUTER PLY

OF POCKET TURNED UPWARD.

301 LSG-2(B) 10-14

G. FOLD OUTER PLY OF POCKET DOWN TO FINISH

POSITIOM. TOPSTITCH ENDS AND TOP WELT WITH

TONGUE NOTCH AT EACH END TURNED UNDER AND SEAM

ALLOWANCE AT TOP OF POCKET DOWNWARD.

301 LSQ-2(B) 10-14

. (SHOWS FINISHED

. SEAM AT TOP OF

. POCKET OPENING)'

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR A-A-50198A: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR A-A-50199: NO ADDITIONAL INFORMATION FOLLOWS.

COMMERCIAL ITEM DESCRIPTION A-A-52071

DATED 25 APRIL 1990 HAS BEEN AUTHORIZED FOR

USE IN PLACE 0F DDD-T-86H.

"THE REQUIREMENT FOR THE HERRINGBONE TAPE IS TYPE me, 3 /16 INCH WIDTH AND 58 PICKS

PER INCH FROM TABLE I. PHYSICAL REQUIREMENTS."

ADDITIONAL INFORMATION FOR A-A-52106:

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3 CLOTH IS

INTENDED FOR USE AS LINING MATERIAL IN DRESS COATS."

ADD "CLASS 4 CLOTH IS INTENDED TO BE USED AS A

GARMENT LINING. CLASS 5 CLOTH IS INTENDED FOR USE

AS A NECKTIE AND NECKTAB OUTERSHELL FABRIC."

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT WEIGHT

2.4 OZ; 2/1 RIGHT HAND TWILL USING 100% FILAMENT

POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4 AND CLASS 5.

CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE TWILL

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD PAGE 1,

GENERAL DESCRIPTION. LINE 5 AFTER "YARNS" ADD

"THE CLASS 4 CLOTH SHALL BE A TW0 UP-ONE DOWN RIGHT

HAND TWILL. THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE

DOWN HERRINGBONE TWILL. THE YARNS FOR CLASS 4 CLOTH

SHALL BE SINGLE PLY WITH A NOMINAL DENIER OF 70 FOR

THE WARP YARNS AND 150 FOR THE FILLING YARNS.

PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER CLASS 3"

ADD INFORMATION FOR "CLASSES 4 AND 5"

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT, PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD.(MIN.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER

"THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN

"THE CLASS 5 CLOTH, USING 100 % FILAMENT HERRINGBONE

TWILL." INSERT "THE CLASS 6 CLOTH POLYESTER SINGLE PLY

WITH BLACK 70 DENIER NOMINAL WARP AND AIR FORCE

BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING

100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL

IN THE WARP AND 150 DENIER NOMINAL IN THE FILLING DIRECTION."

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING:

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE FOLLOWING

NEW PARAGRAPH: "2.4 COLOR. THE COLOR OF THE FINISHED

CLOTH SHALL BE AS SPECIFIED (SEE 5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR SHADE.

CLASS 5 FABRIC IS MADE

FROM DYED WARP AND DYED FILLING IN TWO DIFFERENT COLORS.

(ref. T1514 - 5/23/06)

ADDITIONAL INFORMATION FOR A-A-59826: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-B-371:

PAGE 2, AT THE TOP OF THE PAGE AFTER "CLASS 3" ADD "AND 4". DELETE "CLASS 4 -WATER

AND MILDEW-RESISTANT FINISH 2, 2' METHYLENE BIS (4-CHLOROPHENOL)".

ADDITIONAL INFORMATION FOR MIL-B-3461:

MIL-B-3461G BUTTON, INSIGNIA, METAL,

. UNIFORM AND CAP, 9/30/79;

. AMENDMENT 6 DTD 6/24/03

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

3.7.3, LINE 2: DELETE "5.5" AND SUBSTITUTE "5.0"

ADD THE FOLLOWING PARAGRAPHS:

"3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED

, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE

FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT

AND SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN

4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE

INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR

SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN

RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER

ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN

4.4.4."

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE "10" AND SUBSTITUTE

"7", LINE 4, DELETE "12" AND SUBSTITUTE "8"

TABLE II, BELOW "PH": ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

"WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED.

THE WATER REPELLANT TREATMENT MUST BE

APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,

NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST (MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

(REF. T0969)

Add the following: "NOTE: MIL-DTL-32072 IS CANCELLED AND REPLACED BY A-A-59963, THREAD

POLYESTER, DATED 26 FEBRUARY 2016"

MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

ADDITIONAL INFORMATION FOR mil-c-44296: NO ADDITIONAL INFORMATION FOLLOWS.