Marine Corps Coat Mens Green pgc02049_coatv10.pdf

COAT, MAN'S: POLYESTER/WOOL, GABARDINE, GREEN 2212 (WITH BELT)

SHALL BE MADE IN ACCORDANCE WITH MIL-C-29424A DATED 15 NOVEMBER 1990 AND AMENDMENT 1 DATED 6

JAN 1992

PATTERN DATE: 8 JUNE 2016

ADDITIONAL INFORMATION FOR MIL-C-29424:

STANDARD SAMPLE FOR CLOTH, POLY/WOOL GABARDINE

10.6 OZ., GREEN SHADE 2212, CONFORMING TO TYPE

II, CLASS 12 OF MIL-DTL-10176 IS AVAILABLE ON ROLL

NO. 3935 FOR SHADE, FINISH & COLORFASTNESS.

PAGE 2, PARAGRAPH. 2.1.1,

UNDER SPECIFICATIONS FEDERAL

DELETE V-T-276 AND SUBSTITUTE A-A-52094

DELETE V-T-280 AND SUBSTITUTE A-A-50198

DELETE V-T-295 AND SUBSTITUTE A-A-59826

DELETE A-A- 50196

DELETE UU-P-268 AND SUBSTITUTE A-A-203

DELETE CCC-C-438 AND SUBSTITUTE A-A-50186

DELETE DDD-L-20, LABEL, FOR CLOTHING, EQUIPAGE,

ABD TENTAGE, (GENERAL USE).

DELETE DDD-T-86 AND SUSTITUTE A-A-52071

INSERT A-A-52106 CLOTH, TWILL, OR PLAIN WEAVE, POLYESTER AND POLYESTER BLEND

UNDER SPECIFICATIONS MILITARY

DELETE MIL-C-368, CLOTH, SATIN RAYON AND

CLOTH, TWILL RAYON)

DELETE MIL-C-15062 AND SUBSTITUTE A-A-50067

DELETE MIL-B-17757

DELETE MIL-T-43548 AND SUBSTITUTE A-A-50199

DELETE MIL-C-43718 AND SUBSTITUTE A-A-52106.

INSERT MIL-C-44296 CLOTH, FUSIBLE

INSERT MIL-DTL-32075, LABEL, FOR CLOTHING,

EQUIPAGE, AND TENTAGE (GENERAL USE)

UNDER STANDARDS, FEDERAL, DELETE FED-STD-191,

TEXTILE TEST METHODS. DELETE FED-STD-751,

STITCHES, SEAMS AND STITCHINGS.

PARAGRAPH. 2.1.1, UNDER STANDARDS, MILITARY

REINSTATE MIL-STD-147, PALLETIZED UNIT LOADS.

DELETE MIL-STD-731

PARAGRAPH. 2.1.1, AFTER STANDARDS, DELETE NEW CATEGORY

AS FOLLOWS: HANDBOOKS MILITARY

MIL-HDBK-774 - PALLETIZED UNIT LOADS

PARAGRAPH. 2.2, UNDER AMERICAN SOCIETY FOR TESTING

AND MATERIAL (ASTM) INSERT THE FOLLOWING TEST METHODS:

ASTM D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

ASTM D3775 FABRIC COUNT OF WOVEN FABRIC;

ASTM D3776 MASS PER UNIT AREA(WEIGHT)

OF FABRIC TEXTILE FABRICS(GRAB TEST)

ASTM D6193 STITCHES AND SEAMS;

ASTM D6199 WOOD MEMBERS OF CONTAINERS AND PALLETS, QUALITY OF

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN,PA 19428-2959)

INSERT THE FOLLOWING DOCUMENTS: AMERICAN

ASSOCATION OF TEXTILE CHEMISTS AND COLORISTS

(AATCC)AATCC TECHNICAL MANUAL:

8-COLORFASTNESS TO CROCKING;

15-COLORFASTNESS TO PERSPIRATION;

132-COLORFASTNESS TO DRYCLEANING;

133-COLOR- FASTNESS TO HEAT: HOT PRESSING;

158-DIMENSIONAL CHANGES ON DRYCLEANING IN PERCHLOROETHYLENE

MACHINE METHOD.

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS,

P.O.BOX 12215, RESEARCH TRIANGLE PARK, NC 27709),

AMERICAN SOCIETY FOR QUALITY CONTROL)

ANSI/ASQC Z1.4, AMERICAN NATIONAL STANDARD

SAMPLING PROCEDURES AND TABLES FOR INSPECTION

BY ATTRIBUTES. (APPLICATION FOR COPIES SHOULD

BE ADDRESSED TO AMERICAN SOCIETY FOR QUALITY

CONTROL, 600 NORTH PLANKINTON AVENUE, MILWAUKEE

WI 53201-4606)

PARAGRAPH. 3.3.2, LINING. DELETE THE PARAGRAPH ENTIRELY AND SUBSTITUTE THE

FOLLOWING:

"3.3.2 LINING. THE MATERIAL FOR LINING THE FRONTS, SLEEVES, YOKE AND VENT, MAKING THE BELT FASTENER, AND FACING THE INSIDE BREAST POCKET SHALL BE A TWILL OR SATIN, SOLUTION OR PIECE DYED ACETATE CLOTH CONFORMING TO THE REQUIREMENTS TABLE AI. THE

SHADE OF THE LINING MATERIAL SHALL BE A GOOD MATCH TO THE BASIC MATERIAL."

PARAGRAPH. 3.3.4,

LINE 2, DELETE "MIL-C-15062" AND SUBSTITUTE "A-A-50067".

LINE 4, DELETE "MIL-C-43718" AND SUBSTITUTE "A-A-52106."

PARAGRAPH. 3.3.4, AT THE END OF THE PARAGRAPH, INSERT

"AS AN ALTERNATE, THE MATERIAL MAY BE 100 PERCENT

POLYESTER, NEEDLE-PUNCHED NON-WOVEN MATERIAL,

WEIGHING BETWEEN 8.0 AND 10.0 OZ./SQUARE YARD WITH

A THICKNESS BETWEEN 0.070 AND 0.095 INCH AT 0/6 PSI

AND EXHIBITING A CROSS-MACHINE DIRECTION STIFFNESS OF

0.05 LOAD POUNDS (MINIMUM) IN ACCORDANCE WITH

ASTM-D-747, (VOL 8.01), APPARENT BENDING MODULUS OF

PLASTICS BY MEANS OF A CANTILEVER BEAM. THE COLOR

OF THE UNDERCOLLAR MATERIAL SHALL BE GREEN THAT

CLOSELY MATCHES THE BASIC MATERIAL."

PARAGRAPH. 3.3.6, LINE 2 AND 3, DELETE "TYPE I, CLASS 2

OF CCC-C-438" AND SUBSTITUTE "TYPE I OF A-A-50186."

LINES 3-4, DELETE "METHOD 5580 OF

FED-STD-191 AND SUBSTITUTE "AATCC 158"

PARAGRAPH. 3.3.6.1, FUSIBLE INTERLINING. DELETE IN its ENTIRETY AND SUBSTITUTE

"3.3.6.2 SMALL PARTS FUSIBLE INTERLINING. THE FULL FACINGS, COLLAR ENDS, FLAPS,

POCKETS, CUFFS, SHOULDER STRAPS, AND THE TURN UP OF HEM, ALL KNOWN AS "SMALL PARTS"

SHALL USE A BLACK OR CHARCOAL, NONWOVEN FUSIBLE INTERLINING. IT SHALL CONFORM TO

EITHER TYPE V OR VI, CLASS 1, STYLE A OR B; OR TYPE VIII, CLASS 1, STYLE A, OF MIL- C-44296.

NOTE: FUSIBLE TAPE OVERLAPPING ANY SEAM ON THE BOTTOM IS PROHIBITED."

PAGE 5,

PARAGRAPH 3.3.7.1 DELETE IN ITS ENTIRETY AND SUBSTITUTE

FRONTS FUSIBLE INTERLINING. THE FUSIBLE INTERLINING FOR THE COAT FRONTS AND CENTER BACK VENT SHALL BE A BLACK OR CHARCOAL, NAPPED, WOVEN TWILL MATERIAL CONFORMING TO

TYPE II, CLASS 1, STYLE B OF MIL-C-44296. AS AN ALTERNATE, STYLE NO. T3G WEFT

INSERTED KNIT OR EQUAL MAY BE USED.

THE FUSING CONDITIONS SHALL BE AS DIRECTED BY THE SUPPLIER.

PARAGRAPH 3.3.7.1.1 - CHEST PIECE DELETE IN ITS ENTIRETY AND SUBSTITUTE "THE

FLOATING CHEST PIECE FOR THE COAT SHALL CONFORM TO TYPE XVIII OF MIL-C-15065."

PARAGRAPH 3.3.8, AFTER MIL-P-15064, INSERT

"AS AN ALTERNATE, THE SHOULDER PAD SHALL CONFORM

TO THE REQUIREMENTS OF INSERT "A." OF MIL-P-15064.

PARAGRAPH 3.3.11, LINE 2, DELETE "DDD-T-86" SUBSTITUTE "A-A-52071"

PAGE 6,

PARAGRAPH 3.3.12, DELETE "type I of MIL-C-43718" AND SUBSTITUTE "class 1 of A-A-52106".

PARAGRAPH 3.3.13.1,

LINE 1, DELETE "V-T-276" AND SUBSTITUTE "A-A-52094".

UNDER TYPE, DELETE IC2" AND SUBSTITUTE "III".

DELETE "IA1 OR IA230" AND SUBSTITUTE "I".

DELETE "IA3 OR IB3" AND SUBSTITUTE "I OR II:

LINE 12, DELETE "MIL-T-43548" AND SUBSTITUTE "A-A-50199, Tex".

LINE 13, DELETE "2" AND SUBSTITUTE "3".

Page 6, PARAGRAPH 3.3.13.2: Delete and substitute:

"3 3.13.2 Silk thread replacement. The following threads are to be used as a substitute in place of silk threads for the outlined operations."

Thread Replaced Operation T-40 A-Silk For all seaming and topstitching B & F Nylon B & F Silk Buttonholes B Nylon B Silk Eyelets 0 Nylon 0 Silk Felling

PAGE 7, PARAGRAPH 3.3.14, DELETE LINES 1-2 "THE BUTTONHOLE...V-T-280" AND

SUBSTITUTE THE FOLLOWING SENTENCE "THE BUTTONHOLE GIMP SHALL BE COTTON, CONFORMING

TO SOFT FINISH (TYPE I) OR GLAZED FINISH (TYPE II) OF A-A-50198".

PAGE 7, PARAGRAPH 3.3.15.2, LINE 4 AFTER "BUTTONS 1966)" ADD "OR A GREEN THAT IS

GOOD MATCH TO THE BASIC MATERIAL.

PAGE 7, PARAGRAPH 3.3.16 Delete and substitute:

“3.3.16 Fastener, snap. The snap fastener for the belt shall be brass, black Japanned finish, or black chemical finish in accordance with MIL-F-495, round or square style, rolled edge, size 1/0 sew-on type. The snap fastener, when tested as specified in Section 4, Table IV, shall comply with the requirements specified herein.”

PAGE 7, PARAGRAPH IDENTIFICATION LABEL 3.3.17.1, LINE 2,

DELETE "DDD-L-20" AND SUBSTITUTE "MIL-DTL-32075".

PAGE 7, PARAGRAPH 3.3.17.1, IDENTIFICATION LABEL, AT

THE END OF THE FIRST SENTENCE ADD "OR AS AN ALTERNATIVE

THE USE OF 4800WT TAPE FOR LABELING IS APPROVED"

PAGE 8, 3.3.17.2, SIZE LABEL, LINE 1, DELETE "DDD-L-20"

SUBSTITUTE "MIL-DTL-32075".

PAGE 8, PARAGRAPH 3.3.17.3, LINE 2, DELETE "DDD-L-20" AND

SUBSTITUTE "MIL-DTL-32075"

PAGE 8, AFTER PARAGRAPH 3.3.17.3, ADD THE FOLLOWING PARAGRAPH:

"3.3.17.4 DLA TROOP SUPPORT EXCLUSIVE LABEL - EACH COAT SHALL CONTAIN THE EXCLUSIVE

LABEL. THE JACQUARD WOVEN EXCLUSIVE LABEL SHALL INCORPORATE THE DLA LOGO

(ATTACHED) AND SHALL SPECIFY "MADE EXCLUSIVELY FOR DEFENSE LOGISTICS AGENCY" AND

SHALL INCLUDE "BY" AND THE CONTRACTOR'S NAME. THE LABEL SHALL BE POSITIONED

CENTERED AND SEWN ABOVE THE INSTRUCTION LABEL ON THE INSIDE RIGHT FRONT FACING.

THE LABEL SHALL BE APPROXIMATELY 2 INCHES SQUARE AND SEWN ON ALL FOUR SIDES. THE

PROPOSED FINISHED LABEL'S DESIGN SHALL BE SUBMITTED TO THE CONTRACTING OFFICER FOR

APPROVAL."

PAGE 8, AFTER PARAGRAPH 3.3.17.4 ADD NEW PARAGRAPH. 3.3.17.5.

"3.3.17.5 LABEL/TAG. EACH ITEM SHALL BE

INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER USED FOR

THE TAGS SHALL BE STANDARD BLEACHED SULFATE

HAVING A BASIS WEIGHT OF 100 POUNDS WITH A

SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND

DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.THE

BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL

STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT

UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL

NSNS BY THE GOVERNMENT. THE INITIALS "UPC"

MUST APPEAR BENEATH THE CODE. THE BAR CODES

FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH

DENSITY AND SHALL BE LOCATED SO THAT THEY ARE

COMPLETELY VISIBLE ON THE ITEM WHEN IT IS

FOLDED AND OR PACKAGED AS SPECIFIED. THE LABEL'S

LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT

CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE

LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII

(TAG, PAPER) OF MIL-DTL-32075.

PAGE 8-9, PARAGRAPH 3.5.1 List of Pattern Parts: Under “ Material: Polyester and Wool, after item 17 “Belt Lining” Insert the following items:

"Item 18 Belt Optional “ “Item 19 Belt Optional Fusible” Re-number the remaining steps in sequential order.

PAGE 9, UNDER "PATTERN NOMENCLATURE"

DELETE "MATERIAL: CLOTH, RAYON LINING"

AND SUBSTITUTE "MATERIAL: CLOTH, LINING"

PAGE 10, PARAGRAPH 3.6.1, LINE 2, DELETE

"FED-STD-191" AND SUBSTITUTE "ASTM D 6193"

PAGE 11, TABLE I, OPERATION 1D., LINE 4

DELETE "RAYON" AND LINE 5 DELETE "RAYON".

PAGE 13, TABLE I, OPERATION 4D, MAKE BELT

LOOPS AND KEEPER. LINE 1, DELETE "4-1/2

INCHES" AND REPLACE WITH "4-3/4 INCHES".

Page 15 Table I Operation 7 Close ends of belt, at the end of the operation:

Add a new paragraph as follows:

As an alternate to the above operation for a 2 piece belt the following operations may be performed for a 1-piece belt:

1. Cut

2. Fuse T3-G

3. Make/ Belt on Folder with Double Needle Machine

4. Sew on Snap

5. Make Point 6.Top Stitch Point PAGE 16, Table I, Operation 8a, line 2 Make buttonhole in belt after cut delete “1” and substitute “5/8”.

PAGE 16, OPERATION 9b, UNDER "NDL" COLUMN

DELETE "20" AND SUBSTITUTE "24"

PAGE 33 TABLE I, OPERATION 33 a., LINE 3 DELETE “RAYON” PAGE 33 TABLE I, OPERATION 33 b., LINE 1 DELETE “RAYON” AND SUBSTITUTE “LINING”

PAGE 36, TABLE I, OPERATION 31 N., LINE 1, AFTER

"LABEL TO" DELETE REMAINDER OF PARAGRAPH AND

SUBSTITUTE "THE INSIDE RIGHT FRONT FACING,3-1/2 to 4 INCHES FROM FINISHED BOTTOM

EDGE OF THE COAT AND 2 INCHES IN FROM THE RIGHT FRONT EDGE OF FACING, WITH

A SINGLE ROW OF STITCHING 1/16 INCH FROM EACH EDGE".

PAGE 52, TABLE I, OPERATION 58E, AT END OF OPER-

TION: ADD NEW PARAGRAPH AS FOLLOWS:

"AS AN ALTERNATE, THE OPERATION TO FELL THE

FRONT LINING TO THE YOKE LINING MAY BE PERFORMED

BY USING AN AUTOMATIC TACKING MACHINE. TWO BLIND

TACKS SHALL BE POSITIONED WITH FIRST TACK PLACED

AT BOTTOM CORNER OF YOKE LINING AND SECOND TACK

PLACED HALFWAY IN BETWEEN LOWER CORNER OF YOKE

LINING AND ARMHOLE SEAM. THE TACKS SHALL NOT

PENETRATE THE BODY OF THE COAT AND SHALL NOT BE VIS-

IBLE ON OUTSIDE OF COAT."

PAGE 53, OPERATION 62a, DELETE STEP AND SUBSTITUTE THE FOLLOWING:

"a. POSTITION THE SHOULDER STRAPS WITH THE POINTED END OF THE STRAP EVEN WITH THE EDGE OF THE NECK, PLACED HALFWAY BETWEEN LOWER CORNER OF THE YOKE LINING AND WITH THE RAW EDGE IN LINE WITH THE ARMHOLE AND THE BACK FINISHED EDGE OF THE STRAP, 1/2

BEHIND AND IN LINE WITH THE SHOULDER SEAM. THE BUTTON SHALL BE IN ALIGNMENT WITH

THE SHOULDER STRAP BUTTONHOLE AND WHEN BUTTONED SHALL NOT CAUSE DISTORTION OF THE

STRAP OR SHOULDER."

PAGE 60, OPERATION 76.b (2) UNDER "NDL" COLUMN

LINES 2-7 DELETE "MERCERIZED COTTON 50/2 OR 3 AND

SUBSTITUTE "COTTON-COVERED POLYESTER 70/2".

PAGE 62, TABLE I, OPERATION 76f:LINES 1-4: DELETE "FELL

THE UPPER BACK EDGE OF THE FRONT LINING TO THE

YOKE LINING, PLACING THE STITCHING OVER THE FOLDED

EDGE OF THE FRONT LINING."

PAGE 67, OPERATION 83a, UNDER "BOB/LPR" COLUMN, ADD "COTTON COVERED POLYESTER 70/2".

PAGE 67, OPERATION 83a, and b., UNDER "NDL" COLUMN LINES

1, 2, AND 3 DELETE "20" AND SUBSTITUTE "24"

PAGE 67, OPERATION 83c, UNDER "NDL" COLUMN, LINES 1

& 2 DELETE "20" AND SUBSTITUTE "24".

PAGE 68, OPERATION 83e, UNDER "NDL" COLUMN, LINES

1, 2, & 3 DELETE "20" AND SUBSTITUTE "24".

PAGE 72, PARAGRAPH 4.5.1, LINE 4, DELETE

"FED-STD-191" AND USE TABLE IV.

PAGE 72, TABLE IV, UNDER "TEST METHOD" COLUMN

LINES 1-3, DELETE "5622, 5680, 5640" AND SUB-

STITUTE "AATCC 132, AATCC 15, AATCC 133" RE-

SPECTIVELY, AND AT THE END OF TABLE IV ADD NEW

COMPONENT AS FOLLOWS:

COMPONENTS CHARACTER- REQUIRMENT TEST

. ISTIC PARAGRAPH METHOD

LINING CLOTH YARNS/INCH 3.3.2 ASTM 3775

ACETATE

. WEIGHT 3.3.2 ASTM 3776

. BREAK STRENGT3.3.2 ASTM 5034

. COLORFASTNESS TO

. PERSPIRATION 3.3.2 AATCC 15

. DRYCLEANING 3.3.2 AATCC 132

. CROCKING 3.3.2 AATCC 8

PAGE 73, PARAGRAPH 4.5.1.1, UNDER "COMPONENTS" ADD THE FOLLOWING NEW COMPONENT AS

FOLLOWS:

COMPONENTS; LINING CLOTH - ACETATE

LOT SIZE EXPRESSED AS - "YARDS"

SAMPLE UNIT FOR TESTING - "1/2 YARD"

PAGE 75, PARAGRAPH.5.2.1, LINE 6, DELETE

"UU-P-268" AND SUBSTITUTE "A-A-203"

PAGE 75, PARAGRAPH 5.2.2.1, LINE 7, DELETE

"GRADE B OF UU-P-268" AND SUBSTITUTE "STYLE 2 OF A-A-203"

PAGE 75, PARAGRAPH 5.3, LINE 2 DELETE "THE SHIPPING

CONTAINERS" AND SUBSTITUTE, "UNIT PACKAGES,

SHIPPING CONTAINERS AND PALLETIZED UNIT LOADS".

(Ref. W2049)

ACETATE LINING CHANGES REPLACEMENT FOR RAYON

(FOR MARINE CORPS DRESS UNIFORMS)

TABLE AI. LINING MATERIAL.

CHARACTERISTIC REQUIREMENT VERIFICATION

. PARAGRAPH

. TWILL SATIN

YARNS PER INCH (MIN.)

WARP 120 288 4.5.1

FILLING 68 68 4.5.1

WEIGHT -OZ/YD 3.4 4.9 4.5.1

(MIN.)

BREAKING STRENGTH (LBS.,

(MIN)

DRY

WARP 74 83 4.5.1

FILLING 49 117 4.5.1

WET

WARP 54 54 4.5.1

FILLING 34 77 4.5.1

COLORFASTNESS TO:

PERSPIRATION (MIN.)

COLOR CHANGE 5 5 4.5.1

STAINING ON

COTTON 3.5 5 4.5.1

STAINING ON

WOOL 4.5 5 4.5.1

DRYCLEANING

COLOR CHANGE 4.5 5 4.5.1

STAINING ON

COTTON 4.5 5 4.5.1

STAINING ON

WOOL 4.5 5 4.5.1

CROCKING DRY 4.5 4.5 4.5.1

TABLE IV

TESTING REQUIREMENTS FOR ACETATE LINING CLOTH

COMPONENTS CHARACTER- REQUIREMENT TEST

. ISTIC PARAGRAPH METHOD

LINING CLOTH YARNS/INCH 3.3.2 ASTM D 3775

ACETATE

. WEIGHT 3.3.2 ASTM D 3776

. BREAK STRENGTH 3.3.2 ASTM D 5034

. COLORFASTNESS TO

. PERSPIRATION 3.3.2 AATCC 15

. DRYCLEANING 3.3.2 AATCC 132

. CROCKING 3.3.2 AATCC 8

PARA. 4.5.1.1 SAMPLING. UNLESS OTHERWISE SPECIFIED

IN SUBSIDIARY SPECIFICATIONS, SAMPLING SHALL

BE IN ACCORDANCE WITH THE FOLLOWING. THE LOT

SHALL BE UNACCEPTABLE IF ONE OR MORE SAMPLE

UNITS FAIL TO MEET ANY TEST REQUIREMENTS

SPECIFIED HEREIN.

LOT SIZE SAMPLE SIZE (SAMPLE UNIT)

800 OR LESS 2

801 THROUGH 22,000 3

22,001 AND OVER 5

THE UNIT FOR EXPRESSING LOT SIZE AND SAMPLE

UNIT FOR TESTING EACH COMPONENT SHALL BE IN

ACCORDANCE WITH THE APPLICABLE SUBSIDIARY

SPECIFICATION OR AS FOLLOWS:

COMPONENTS LOT SIZE SAMPLE UNIT

. EXPRESS AS FOR TESTING

LINING CLOTH

ACETATE YARDS 1/2 YARD

(Ref. 90271)

ADDITIONAL INFORMATION FOR V-B-871: NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

(ref. T1481)

ADDITIONAL INFORMATION FOR A-A-50198A:

THREAD, GIMP SHALL BE IN ACCORDANCE WITH

A-A-50198, JUNE 30, 1989.

CHANGES TO V-T-295E:

THREAD, NYLON; V-T-295 DATED AUGUST 1, 1985 IS HEREBY CANCELLED; FUTURE ACQUISITONS

SHOULD REFER TO THREAD, NYLON, A-A-59826 DATED 03 MARCH 2009 AS A REPLACEMENT.

ADDITIONAL INFORMATION: INTERIM CHANGES TO A-A-50186:

PAGE 1:

PARA. 1.1 TYPES, NEXT TO TYPE V NON-WOVEN ADD

"(MEDIUM WEIGHT)", UNDER TYPE V ADD "TYPE VI

NON-WOVEN (LIGHT WEIGHT)".

PARAGRAPH 2.1, LINE 5. GENERAL.: DELETE

"SATURATION BONDED WITH ACRYLIC TYPE BINDER"

AND SUBSTITUTE "EITHER WET-LAID, SATURATION BONDED OR THERMAL BONDED".

PAGE 2:

TABLE 1. PHYSICAL REQUIREMENTS (WOVEN) UNDER TEST

METHOD COLUMN, LINE 3 DELETE "1600" AND SUBSTITUTE

"AATCC 20 3/".

TABLE I. PHYSICAL REQUIREMENTS (WOVEN) AT BOTTOM OF

PAGE UNDER FOOTNOTE 2/ ADD THE FOLLOWING: "3/ AMERICAN ASSOCIATION OF TEXTILE

CHEMISTS AND COLORISTS

TEST METHOD."

PAGE 3, TABLE II, PHYSICAL REQUIREMENTS (NONWOVEN) UNDER

TYPE V, AND VI, ACROSS "CONSTRUCTION": DELETE "WET-LAID"

AND "WET-LAID OR SATURATE, THERMAL BONDED" AND SUBSTITUTE

"SEE 2.1" FOR BOTH TYPES.

TABLE II, UNDER TYPE VI: ADD UNDER EACH CHARACTERISTIC:

"1.5, 12, 8, 2.5, 2.5, WET-LAID OR SATURATE THERMAL BONDED" RESPECTIVELY.

PAGE 3, PARA. 3.2 FINISH. LINE 1 DELETE "AN APPROVED" AND SUBSTITUTE " A

COMMERCIALLY ACCEPTED".

PAGE 5: ADD THE FOLLOWING: "5.7 SUPER SESSION DATA.

THE TYPES OF CLOTH COVERED BY THIS COMMERCIAL ITEM

DESCRIPTION REPLACE TYPES COVERED BY CCC-C-438 AS FOLLOWS:

A-A-50186 CCC-C-438

TYPE I TYPE I, CLASSES 1 AND 2

TYPE II TYPE II, CLASS 1

TYPE III TYPE III, CLASS 1

TYPE IV TYPE III, CLASS 2

TYPE V TYPE IV, CLASS 1

TYPE VI TYPE IV, CLASS 2"

(ref. T1034 - May 19, 2006)

MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 4, PARA. 3.3.5, AFTER "TYPE III OR IV, CLASS 4 OF" DELETE "DDD-L-20" AND

REPLACE "MIL-DTL-32075,".

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR A-A-52071:

TAPE, TEXTILE, COTTON, FOR GENERAL USE.

ADDITIONAL INFORMATION FOR DDD-T-86:

INTERIM CHANGES TO DDD-T-86H:

NOTE - REDUCED AQLS APPLY AS FOLLOWS:

PAGE 9, LINE 9, DELETE "0.4" AND SUBSTITUTE,

"0.28", FOR MAJORS. DELETE "1.5" AND SUBSTITUTE

"1.0", FOR TOTALS.

COMMERCIAL ITEM DESCRIPTION A-A-52071

DATED 25 APRIL 1990 HAS BEEN AUTHORIZED FOR

USE IN PLACE 0F DDD-T-86H.

"THE REQUIREMENT FOR THE HERRINGBONE TAPE IS TYPE I, 3/16 INCH WIDTH AND 58 PICKS

PER INCH FROM TABLE I. PHYSICAL REQUIREMENTS."

ADDITIONAL INFORMATION FOR MIL-B-371:

PAGE 2, AT THE TOP OF THE PAGE AFTER "CLASS 3" ADD "AND 4". DELETE "CLASS 4 -WATER

AND MILDEW-RESISTANT FINISH 2, 2' METHYLENE BIS (4-CHLOROPHENOL)".

PAGE 3, PARAGRAPH 2.2 OTHER PUBLICATIONS. ADD THE FOLLOWING BELOW "APPLICATION FOR

COPIES SHOULD BE ADDRESSED TO: ASTM INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST

CONSHOHOCKEN, PA. 19428"

"AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER

ANALYSIS: QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN

ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE

PARK, NC 27709-2215)"

PAGE 4, PARA. 3.3.3, DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING: "3.3.3

POLYPROPYLENE YARN (AS AN ALTERNATIVE FOR TYPES III AND VII BRAID). THE YARN SHALL

BE TEXTURED POLYPROPYLENE OF SUITABLE DENIER TO MEET THE REQUIREMENTS OF THIS

DOCUMENT. POLYPROPYLENE BRAID IS APPLICABLE ONLY TO THE ITEMS LISTED IN PARAGRAPH 6.7."

AFTER PARA. 3.3.4: ADD THE FOLLOWING NEW PARA: "3.3.5. 100% TEXTURED POLYESTER(AS AN ALTERNATIVE FOR TYPES I, II, IV, AND VI).THE YARN SHALL BE TEXTURED POLYESTER OF

A SUITABLE DENIER TO MEET THE REQUIREMENTS OF THIS DOCUMENT."

PAGE 5, PARA. 3.5.3 AFTER "CLASS 3" ADD "CLASS 4." AFTER "THE CLASS 3" ADD "AND

4".

PARA. 3.5.4, DELETE IN ITS ENTIRETY.

PAGE 8, ADD THE FOLLOWING TABLE IIA:

"TABLE IIA PHYSICAL REQUIREMENTS FOR POLYESTER BRAID

TYPE DIAMETER WEIGHT PER NUMBER OF ENDS PER

(INCHES) 144 YARDS CARRIERS CARRIER

(OUNCES)

MIN.

II 5/32+/-1/32 28.0 8 1

VII 11/32+/-1/32 25.0 44 1

NUMBER YARN PLY PICKS BREAKING

OF ENDS BRAID CORE PER INCH STRENGTH

IN CORE MIN. (LBS.) MIN.

1/ 8 2 3 10 140

- - - 22 200

1/ UNDYED COTTON CORE YARNS."

PAGE 10, PARA. 4.4.2.1 YARD-BY-YARD EXAMINATION, LINE 9, DELETE "1.5" AND

SUBSTITUTE "1.0"

PAGE 13, TABLE V. END ITEM TESTS UNDER REFERENCED TEST METHOD COLUMN, LINES 4 AND 5

DELETE "1600" AND SUBSTITUTE "AATCC 20"

(ref. T0821 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-F-495:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-B-3461:

MIL-B-3461G BUTTON, INSIGNIA, METAL,

. UNIFORM AND CAP, 9/30/79;

. AMENDMENT 6 DTD 6/24/03

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

3.7.3, LINE 2: DELETE "5.5" AND SUBSTITUTE "5.0"

ADD THE FOLLOWING PARAGRAPHS:

"3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED

, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE

FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT

AND SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN

4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE

INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR

SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN

RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER

ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN

4.4.4."

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE "10" AND SUBSTITUTE

"7", LINE 4, DELETE "12" AND SUBSTITUTE "8"

TABLE II, BELOW "PH": ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

"WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED.

THE WATER REPELLANT TREATMENT MUST BE

APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,

NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST (MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

(REF. T0969)

ADDITIONAL INFORMATION FOR A-A-50067:

PAGE 1 PARA 2.2, LINE 5, AFTER " SECTION 16"

DELETE "THE CLOTH SHALL HAVE A MAXIMUM SHRINKAGE

RATE OF 2.0 IN THE WARP AND FILLING DIRECTION."

AND SUBSTITUTE " THE CLOTH SHALL HAVE A MAXIMUM

SHRINKAGE RATE OF 4.0 IN BOTH THE WARP AND

FILLING DIRECTIONS."

(Ref. T0402)

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU

OF MIL-B-17757:

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND

ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING

FIBERBOARD SHIPPING CONTAINERS.

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-P-15064:

INTERIM CHANGE TO MIL-P-15064G:

AS AN ALTERNATE PADS, SHOULDER AND SLEEVE-HEAD

ADD "BLEACHED MUSLINETTE".

PAGE 4, PARAGRAPH 3.2.1 PRINT CLOTH. ADD THE

FOLLOWING SENTENCE AT THE END OF THE PARAGRAPH

"AS AN ALTERNATE, THE TYPE IV SLEEVE-HEAD OUTER

COVER SHALL BE 100% COTTON MUSLIN WITH A MINUMUM

OF 44 WARP AND 36 FILLING YARNS PER SQUARE INCH.

TABLE I. MATERIAL REQUIREMENTS, ADD THE FOLLOW-

ING INFORMATION TO THE TABLE.

TYPE IV 44 BY 36"

PAGE 4: PARA. 3.2.2.1, LINE 2, AFTER "CLASS 1":

ADD "OR CLASS 2".

PAGE 4: PARA. 3.2.2.2,LINE 2, AFTER "UNBLEACHED"

ADD "OR BLEACHED".

PAGE 6, PARAGRAPH 3.2.6 WADDING. ADD THE FOLL-

ING SENTENCE AT THE END OF THE PARAGRAPH. "AS AN

ALTERNATE, THE TYPE IV SLEEVE-HEAD FILLER SHALL

BE 100% PRENEEDLED COTTON FILLER, WEIGHING A

MINIMUM OF 3.0 OUNCES PER SQUARE YARD AND A MAX-

IMUM OF 3.5 OUNCES PER SQUARE YARD"

PAGE 8, ADD "PARAGRAPH 3.5.10 TYPE IV. AS AN

ALTERNATE TYPE IV SLEEVE-HEAD SHALL MEASURE 15

INCHES (+/- 1/4 INCH) FOR MEN AND 13 INCHES (+/-1/4

INCH) FOR WOMEN."

PAGE 9, ADD THE FOLLOWING INFORMATION TO TABLE

II.

TABLE II. MANUFACTURING OPERATIONS REQUIREMENTS-

CONTINUED.

NO. REQUIRMENTS STITCH SEAM STITCHES THREAD

. TYPE TYPE PER INCH NDL BOB

1. CUTTING: "OR

C. THE MUSLIN SHALL BE SPLIT 3 INCHES (+/-1/8

INCH) IN THE BIAS DIRECTION."

2.CONSTRUCTION: "OR C. FOLD THE MUSLIN BIAS

STRIP TO FINISH TWO INCHES +/- 1/8 INCH. THE

COTTON FILLER WILL BE INSIDE THE FOLDED MUSLIN.

THE COTTON WILL BE CUT 2 -1/4 INCHES +/-1/8 INCH

WIDE. BOTH PIECES WILL BE SEWN WITH A STITCH

LINE APPROXIMATELY 1/2 INCH FROM THE FOLDED EDGE

OF THE SLEEVE HEAD. (SEE FIGURE 6, PAGE 37)"

301/401 EFA-1 3-4 70-2 70-2

PAGE 37, ADD FIGURE 6, SLEEVE HEAD, MAN'S AND

WOMEN'S TYPE IV."

ALTERNATE WOMEN'S PAD'S INSERT "B" REQUIREMENTS

THE SHOULDER PADS SHALL HAVE A TOP AND BOTTOM

COVER OF 4 OUNCES PER SQUARE YARD WHITE NEEDLE

PUNCHED POLYESTER FELT WHEN TESTED IN ACCORDANCE

WITH ASTM D-3776, OPTION C. THE FILLER SHALL BE

COTTON, ONE PIECE SHAPED TO FILL OUT THE PAD

WITH AN EVEN SMOOTH TAPER FROM CENTER TO ALL

EDGES. MULTIPLE PIECES ARE NOT ACCEPTABLE. THE

TOP COVER SHALL BE NOTCHED FOR SHOULDER SEAM

ALIGNMENT 4-3/4 INCHES FROM THE FRONT OF THE PAD

THE PAD SHALL BE SEWN IN A CONCAVE SHOULDER FIT-

TING FORM UTILIZING MULTI-LINE OF BASTING, TOTAL

ING 6 ROWS. THE PAD SHALL HAVE A COMPRESSED FIN-

ISHED THICKNESS MEASURING 3/8 +/- 1/8 INCH USING

A ONE INCH FOOT AT 0.1 PSI. THE FINISHED PAD

SHALL MEASURE 8-1/2 TO 9-1/2 INCHES IN LENGTH

AND 4-1/2 TO 5 INCHES IN WIDTH, WITH A 1/2 INCH

ARMHOLE CUTOUT ON EACH SIDE. THE PADS SHALL NOT

BE SIGNIFICANTLY ALTERED IN THICKNESS, SHAPE OR

DIMENSION AFTER BEING COMMERICALLY DRY CLEANED 3

TIMES WITH PERCHLOROETHELENE. THE PAD SHALL HAVE

A MINIMUM BREAKING STRENGTH OF 6.0 POUNDS IN THE

MACHINE DIRECTION AND A MINIMUM OF 3.0 POUNDS IN

IN THE CROSS DIRECTION WHEN TESTED IN ACCORDANCE

ASTM-D 5034, OPTION G-T OR G-E.

ALTERNATE MEN'S PAD'S INSERT "A" REQUIREMENTS

THE SHOULDER PADS SHALL HAVE A TOP AND BOTTOM

COVER OF 4 OUNCES PER SQUARE YARD WHITE NEEDLE

PUNCHED POLYESTER FELT WHEN TESTED IN ACCORDANCE

WITH ASTM D 3776, OPTON C. THE FILLER SHALL BE

COTTON, ONE PIECE SHAPED TO FILL OUT THE PAD

WITH AN EVEN SMOOTH TAPER FROM CENTER TO ALL

EDGES. MULTIPLE PIECES ARE NOT ACCEPTABLE. THE

TOP COVER SHALL BE NOTCHED FOR SHOULDER SEAM

ALIGNMENT 4-1/4 INCHES FROM THE FRONT OF THE PAD

THE PAD SHALL BE SEWN IN A CONCAVE SHOULDER FIT-

TING FORM UTILIZING MULTI-LINE OF BASTING, TOTAL

ING 6 ROWS. THE PAD SHALL HAVE A COMPRESSED FIN-

ISHED THICKNESS MEASURING 1/2 +/- 1/8 INCH USING

A ONE INCH FOOT AT 0.1 PSI. THE FINISHED PAD

SHALL MEASURE 9-3/4 TO 10/3/4 INCHES IN LENGTH

AND 5-3/8 TO 5-5/5 INCH IN WIDTH, WITH A 1/2 INCH

ARMHOLE CUTOUT ON EACH SIDE. THE PADS SHALL NOT

BE SIGNIFICATNLY ALTERED IN THICKNESS, SHADE OR

DIMENSION AFTER BEING COMMERCIALLY DRY CLEANED 3

TIMES WITH PERCHLOROETHELENE. THE PAD SHALL HAVE

A MINIMUM BREAKING STRENGTH OF 6.0 POUNDS IN THE

MACHINE DIRECTION AND MINIMUM OF 3.0 POUNDS IN

THE CROSS DIRECTION WHEN TESTED IN ACCORDANCE

WITH ASTM-D 5034, OPTION G-T OR G-E.

DEVIATION FROM MIL-P-15064F;

PAGE 6, PARA. 3.5.1, LINE 4 DELETE "7/8+1/8 INCH" AND

SUBSTITUTE "1/2+1/8 INCH."

(Ref. T1553) Interim specification changes to MIL-C-15065J

Page 5, Paragraph 3.3.2: Delete paragraph in its entirety and substitute:

"3.3.2 Haircloth. The material for the shoulder pieces (types IV, VI, VII, XIV, XVII, XVIII and XXII), chest pieces and reinforcement piece for top front corners (type XI) shall be a plain weave construction with 100% spun polyester warp yarns with 100% monofilament polyester filling yarns and shall conform to the requirements in Table A (see 6.7). An alternate for types VI, XVIII, XIX, and XXI shoulder piece may include fabric having warp yarns made from 100 percent cotton, from 100 percent polyester, or from any combination of polyester and cotton. The filling yarns of the alternate fabric shall be made from 100 percent nylon or polyester mono-filament and shall conform to the requirements in Table A (see 6.7).

The material shall be undyed and contain no sizing (see 4.4.1.1) or resins.

Table A. Material requirements

Shoulder Piece Alternate Shoulder Characteristic Requirements Piece Requirements Test Method Weight, oz/sq yd., min 5.2 4.6 ASTM D 3776 Yarns per inch, min:

Warp 52 51 ASTM D 3775 Filling 31 37 ASTM D 3775 Breaking strength, min:

Warp 160 75 ASTM D 5034 Filling 250 190 ASTM D 5034 Dry cleaning shrinkage (%), max., after 3 dry cleanings:

Warp 2.0% 2.0% Commercial dry cleaning 1/ 2/ Filling 2.0% 2.0% Commercial dry cleaning 1/ 2/ Stiffness, filling, load lbs., min

Initial 0.120 0.035 ASTM D 747 1/ 2/ After 3 dry cleanings 0.115 0.061 ASTM D 747 1/ 2/

1/ Material shall be steam pressed between each dry cleaning.

2/ Each individual Service reserves the right to test for appearance, shrinkage, and stiffness in an end item configuration."

Page 48, Add the following new paragraphs:

"6.7 Suggested Sources.

6.7.1 Haircloth A suggested source for the haircloth is QST Industries, Inc., 525 West Monroe Street, Suite 1400, Chicago, IL 60661, Telephone Number (312) 930-9400. QST Part #BR-CHESTPC-50-WE has been found to meet these requirements.

6.7.2 Alternate Chest Piece. A suggested source for the alternate chest piece is Cotswold Industries, Inc., 10 East 40th Street, New York, NY 10016-0301, Telephone Number (212) 689-3432. Pattern/Number 1641 USG has been found to meet these requirements.

INTERIM CHANGES TO MIL-C-15065H:

PAGE 8, TABLE II, LIST OF PATTERN PARTS, TYPE IX

AND X, DELETE ENTIRELY AND SUBSTITUTE:

"BASIC MATERIAL FRONT 2

. CHEST PIECE 2

. WEDGE PIECE (SHOULDER) 4

HAIRCLOTH SHOULDER PIECE 2

FELT OR FLANNEL CHESTPADDING 2"

DELETE FIGURE 7 AND SUBSTITUTE NEW FIGURE 7

ATTACHED.

ADDITIONAL INFORMATION FOR MIL-B-20289:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T0863)

ADDITIONAL INFORMATION FOR MIL-C-29137:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T1562)

ADDITIONAL INFORMATION FOR A-A-52106:

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3 CLOTH IS

INTENDED FOR USE AS LINING MATERIAL IN DRESS COATS."

ADD "CLASS 4 CLOTH IS INTENDED TO BE USED AS A

GARMENT LINING. CLASS 5 CLOTH IS INTENDED FOR USE

AS A NECKTIE AND NECKTAB OUTERSHELL FABRIC."

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT WEIGHT

2.4 OZ; 2/1 RIGHT HAND TWILL USING 100% FILAMENT

POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4 AND CLASS 5.

CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE TWILL

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD PAGE 1,

GENERAL DESCRIPTION. LINE 5 AFTER "YARNS" ADD

"THE CLASS 4 CLOTH SHALL BE A TW0 UP-ONE DOWN RIGHT

HAND TWILL. THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE

DOWN HERRINGBONE TWILL. THE YARNS FOR CLASS 4 CLOTH

SHALL BE SINGLE PLY WITH A NOMINAL DENIER OF 70 FOR

THE WARP YARNS AND 150 FOR THE FILLING YARNS.

PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER CLASS 3"

ADD INFORMATION FOR "CLASSES 4 AND 5"

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT, PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD.(MIN.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER

"THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN

"THE CLASS 5 CLOTH, USING 100 % FILAMENT HERRINGBONE

TWILL." INSERT "THE CLASS 6 CLOTH POLYESTER SINGLE PLY

WITH BLACK 70 DENIER NOMINAL WARP AND AIR FORCE

BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING

100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL

IN THE WARP AND 150 DENIER NOMINAL IN THE FILLING DIRECTION."

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING:

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE FOLLOWING

NEW PARAGRAPH: "2.4 COLOR. THE COLOR OF THE FINISHED

CLOTH SHALL BE AS SPECIFIED (SEE 5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR

SHADE. CLASS 5 FABRIC IS MADE

FROM DYED WARP AND DYED FILLING IN TWO DIFFERENT COLORS.

CLASS 5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622 ROLL #89-2.

(ref. T1514 - 5/23/06)

ADDITIONAL INFORMATION FOR MIL-C-44296:

INTERIM SPECIFICATION CHANGES TO MIL-C-44296A:

PAGE 1, PARAGRAPH 1.1, SCOPE., LINE 1: AFTER "AND" INSERT "STITCH-REINFORCED

NONWOVEN".

PAGE 1, PARAGRAPH 1.2, LINE 12: BETWEEN "TYPE X-CIRCULAR KNIT SUBSTRATE" AND "CLASS

1" INSERT "TYPE X1- "STITCH-REINFORCED NONWOVEN".

PAGE 1, PARAGRAPH 1.2. CLASSIFICATION. BELOW "TYPE IX" ADD "TYPE X - CIRCULAR KNIT

SUBSTRATE"

PAGE 2, PARAGRAPH 2. APPLICABLE DOCUMENTS ADD FOLLOWING NEW PARAGRAPH: "2.1.3 OTHER

PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT

SPECIFIED HEREIN. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH ARE

DOD ADOPTED SHALL BE THOSE LISTED IN THE ISSUE OF THE DODISS SPECIFIED IN THE

SOLICITATION. UNLESS OTHERWISE SPECIFIED, THE ISSUES OF THE DOCUMENTS NOT LISTED

IN THE DODISS SHALL BE THE ISSUES OF THE NONGOVERNMENT DOCUMENTS WHICH ARE CURRENT

ON THE DATE OF THE SOLICITATION.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER

ANALYSIS QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO AMERICAN

ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE

PARK, NC 27709-2215)"

PAGE 3, ADD THE FOLLOWING NEW PARAGRAPH: "3.1.2.10 TYPE X. TYPE X SHALL BE A

CIRCULAR KNIT. WHEN SPECIFIED (SEE 6.2), THE FACE SIDE SHALL BE NAPPED."

PAGE 3: AFTER PARAGRAPH 3.1.2.10,ADD THE FOLLOWING: "3.1.2.11 TYPE X1. TYPE X1

SHALL BE STITCH- REINFORCED NONWOVEN WHEREBY A SERIES OF CHAINSTITCHING IS SEWN IN

THE MACHINE DIRECTION OF THE SUBSTRATE IN ORDER TO REINFORCE THE NONWOVEN

CONSTRUCTION."

PAGE 7, PARAGRAPH 3.4. PHYSICAL REQUIREMENTS. ADD THE FOLLOWING NEW TABLE AFTER

TABLE VII:

"TABLE VII. A PHYSICAL REQUIREMENTS FOR TYPE X

STYLE CLASS WEIGHT (INCLUDING BURSTING

ADHESIVE) STRENGTH

OZ/SQ/YD. LBS. (MIN.

MINIMUM MAXIMUM

A 1,2,3 OR 4 1.4 1.8 60

FIBER CONTENT

1/

1/ 100% NYLON OR POLYESTER."

PAGE 7,PARAGRAPH 3.4 PHYSICAL REQUIREMENTS.: AFTER TABLE"V111" ADD NEW TABLE 1X:

"TABLE 1X,PHYSICAL REQUIREMENTS FOR TYPE X1

BREAKING STRENGTH

WGT, OZ/YD2 LBS, (MIN) STITCHING

STYLE CLASS MIN MAX MACH X-MACH CONTENT REIN

FORCEMENT

A 1,2,3 1.0 1.8 10.0 1.0 1/ 2/

1/ 50 TO 100 PERCENT POLYESTER WITH REMAINING PERCENTAGE NYLON OR RAYON.

2/ STITCH REINFORCEMENT CONDUCTED WITH SINGLE MULTIFILAMENT THREAD USING

CHAINSTITCH STITCH TYPE WITH CHAINSTITCH LOOPS ON FUSIBLE SIDE TO PROTECT FROM

UNRAVELING."

PAGE 7, PARAGRAPH 3.4.1. BONDING STRENGTH.

- LINE 2, DELETE "(EXCEPT CLASS 5)" AND SUBSTITUTE "(EXCEPT TYPE IX WHEN USED AS

FUSIBLE SEAM TAPE AND CLASS 5)".

- LINES 7 AND 8, DELETE "OR SHEETING MATERIAL".

PAGE 9, PARA. 4.2.2.1, LINE 22, DELETE "30" AND SUBSTITUTE "20". LINE 24, DELETE

"45" AND SUBSTITUTE "30".

PAGE 11, TABLE VIII. END ITEM TESTS UNDER TEST METHOD COLUMN, LINES 2 AND 3 DELETE

"1600" AND SUBSTITUTE "AATCC 20".

PAGE 12, PARAGRAPH 4.3.1.1. BONDING STRENGTH PROCEDURE (INITIAL AND AFTER

LAUNDERING/DRY CLEANING). DELETE THE FIRST AND SECOND SENTENCES IN THEIR ENTIRETY

AND SUBSTITUTE: "CUT A 12 INCH WARP BY 11 INCH FILLING SAMPLE FROM BOTH THE

OUTERSHELL AND FUSIBLE MATERIALS SPECIFIED FOR CONTRACT USE (SEE 6.5)."

PAGE 15: AT THE END OF PARAGRAPH 6.1.1,ADD THE FOLLOWING:

" E. STITCH REINFORCED NONWOVEN TYPE X1 OFFERS HIGH DEGREE STRENGTH/STABILIZATION FOR TAPE AND STAY APPLICATION FOR LARGE OR SMALL PART FUSIBLES AND IS INTENDED TO

PROVIDE VERTICAL STABILITY AND ABRASION RESISTANCE."

PAGE 16, PARAGRAPH 6.5. BONDING STRENGTH DISPUTE PROCEDURE. INSERT THE FOLLOWING

BETWEEN THE FIRST AND SECOND SENTENCES: "IN SOME CASES, OUTERSHELL SAMPLES

REPRESENTATIVE OF SEPARATE PRODUCTION LOTS MAY BE USED TO DETERMINE IF DIFFERENT

FINISHES MAY AFFECT BONDING STRENGTH."

(ref. T0998 - 5/23/06)

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN.

WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR

REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN

SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH

THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN

EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE

PARALLEL TO THE FACE OF THE DIAL PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE

4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES:

1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF

THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER.

1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS

THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE

METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2,

PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN

SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH

THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO

THE FACE OF THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA.

5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS

ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE

SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK

TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND

BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO

A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL

CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3:

AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1, PARA. 4: DELETE

"APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA. 5.1, LINE 3: AFTER "AT"

DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3

MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR

OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR.

RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR,

INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE

BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE

END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF

ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH

RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST

EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS

NOT NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN

ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO

10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE

VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED

FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR

EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE

VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE

REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE

MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS,

AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH

THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC

ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY

METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST."

(Ref. T0215)

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

(ref. T0216 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-STD-1490:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T0365)

MIL-STD-731 IS HEREBY CANCELLED, NOTICE 2 DATED 12/5/95. ASTM-D-6199 - "STANDARD

PRACTICE FOR QUALITY OF WOOD MEMBERS

OF CONTAINERS AND PALLETS" HAS BEEN ADOPTED AS A REPLACEMENT

AS OF 7/29/98.

(ref. T0340 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-STD-2073-1:

NO ADDITIONAL INFORMATION FOLLOWS

(Ref. T0898)

INTERIM CHANGES TO MIL-STD-1490F:

PAGE 1, PARA. 1.2.1, UNDER MARINE CORPS, ADD

MODEL FORM SIZE 28, CHEST 30, WAIST 24, SEAT-HIP

30 FOR USE IN EXAMINING SIZE 30 FINISHED COATS.

MIL-STD-1490F PAGES 6 & 7, TABLE II DELETE IN

ITS ENTIRETY AND SUBSTITUTE "TABLE II SAMPLING

PROVISIONS".

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP MAX ACCP PT VALU

. NO. FOR

. SELECTED 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS DEFECTS

. (SEE 1.2)

UP THRU 50 20 0 3 7

51-150 32 0 5 11 151-280 50 0 7 13 281-500 80 0 15 19 501-1200 125 1 17 26 1201-3200 200 1 19 36 3201-10,000 315 2 28 54 10,001-35,000 500 3 40 80

35,000 & OVER 800 5 61 120

TIGHTENED

UP THRU 50 20 0 3 5

51-150 32 0 4 8 151-280 50 0 5 10 281-500 80 0 7 13 501-1200 125 1 11 20 1201-3200 200 1 15 31 3201-10,000 315 2 24 45 10,001-35,000 500 3 36 67

35,001 & OVER 800 5 54 100

REDUCED

UP THRU 280 20 0 2-5 1/ 7

281-500 32 0 4-8 1/ 12 501-1200 50 0 7-11 1/ 17 1201-3200 80 0 8-14 1/ 23 3201-10,000 125 1 14-20 1/ 31 10,001-35,000 200 1 18-25 1/ 45

35,001 & OVER 315 2 25-32 1/ 67

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.8.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE.