Marine Corps Coat Mens Blue PGC02916v2A.pdf

COAT, MAN'S, DRESS BLUE WITH GOLD BUTTONS, MARINE CORPS, SHALL BE MADE IN ACCORDANCE WITH MIL-C-19516G DATED 6 MARCH 1991, INTERIM AMENDMENT 1 DATED 14 MAY 1992, ATTACHMENT1 DATED 10

MARCH 2004

PATTERN DATE: 8 DECEMBER 1986

STANDARD SAMPLE CLOTH, POLY/WOOL GABARDINE,10.6 OZ., DARK BLUE SHADE 2312 CONFORMING TO TYPE II, CLASS 12 OF MIL-DTL-10176K IS AVAILABLE ON ROLL NO. 3876 FOR SHADE, FINISH AND

COLORFASTNESS.

PAGE 2, PARAGRAPH. 2.1.1,

UNDER SPECIFICATIONS FEDERAL

DELETE V-T-276 AND SUBSTITUTE A-A-52094

DELETE V-T-280 AND SUBSTITUTE A-A-50198

DELETE V-T-301 AND SUBSTITUTE A-A-50196

DELETE NN-P-71

DELETE UU-P-268 AND SUBSTITUTE A-A-203

DELETE DDD-L-20, LABEL, FOR CLOTHING, EQUIPAGE,

ABD TENTAGE, (GENERAL USE).

DELETE DDD-T-86 AND SUSTITUTE A-A-52071

INSERT A-A-52106 CLOTH, TWILL, OR PLAIN WEAVE, POLYESTER AND POLYESTER BLEND

UNDER SPECIFICATIONS MILITARY

DELETE MIL-C-368, CLOTH, SATIN RAYON AND

CLOTH, TWILL RAYON)

DELETE MIL-C-16375 AND SUBSTITUTE A-A-52097

DELETE MIL-B-17757

DELETE MIL-C-29365

DELETE MIL-C-43718 AND SUBSTITUTE A-A-52106.

INSERT MIL-C-44296 CLOTH, FUSIBLE

INSERT MIL-DTL-32075, LABEL, FOR CLOTHING,

EQUIPAGE, AND TENTAGE (GENERAL USE)

UNDER STANDARDS, FEDERAL, DELETE FED-STD-191,

TEXTILE TEST METHODS. DELETE FED-STD-751,

STITCHES, SEAMS AND STITCHINGS.

PARAGRAPH. 2.1.1, UNDER STANDARDS, MILITARY

DELETE MIL-STD-105

REINSTATE MIL-STD-147, PALLETIZED UNIT LOADS.

PARAGRAPH. 2.1.1, AFTER STANDARDS, DELETE NEW CATEGORY

AS FOLLOWS: HANDBOOKS MILITARY MIL-HDBK-774 - PALLETIZED UNIT LOADS

PARAGRAPH. 2.2, UNDER AMERICAN SOCIETY FOR TESTING

AND MATERIAL (ASTM) INSERT THE FOLLOWING TEST METHODS:

ASTM D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

ASTM D3775 FABRIC COUNT OF WOVEN FABRIC;

ASTM D3776 MASS PER UNIT AREA(WEIGHT)

OF FABRIC TEXTILE FABRICS (GRAB TEST)

ASTM D6193 STITCHES AND SEAMS;

ASTM D6199 WOOD MEMBERS OF CONTAINERS AND PALLETS, QUALITY OF

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

ASTM, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428-2959)

INSERT THE FOLLOWING DOCUMENTS: AMERICAN

ASSOCATION OF TEXTILE CHEMISTS AND COLORISTS

(AATCC)AATCC TECHNICAL MANUAL:

8-COLORFASTNESS TO CROCKING;

15-COLORFASTNESS TO PERSPIRATION;

132-COLORFASTNESS TO DRYCLEANING;

133-COLOR- FASTNESS TO HEAT: HOT PRESSING;

158-DIMENSIONAL CHANGES ON DRYCLEANING IN PERCHLOROETHYLENE MACHINE METHOD.

(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS,

P.O.BOX 12215, RESEARCH TRIANGLE PARK, NC 27709),

AMERICAN SOCIETY FOR QUALITY CONTROL)

ANSI/ASQC Z1.4, AMERICAN NATIONAL STANDARD

SAMPLING PROCEDURES AND TABLES FOR INSPECTION

BY ATTRIBUTES. (APPLICATION FOR COPIES SHOULD

BE ADDRESSED TO AMERICAN SOCIETY FOR QUALITY

CONTROL, 600 NORTH PLANKINTON AVENUE, MILWAUKEE

WI 53201-4606)

PARAGRAPH. 3.3.2, LINING. DELETE THE PARAGRAPH ENTIRELY AND SUBSTITUTE THE FOLLOWING:

"3.3.2 LINING. THE MATERIAL FOR LINING THE COAT, POCKET FLAPS, COLLAR, VENT, AND COLLAR EYELET COVERS SHALL BE A TWILL OR SATIN, SOLUTION OR PIECE DYED ACETATE CLOTH CONFORMING TO THE REQUIREMENTS TABLE AI. THE SHADE OF THE LINING MATERIAL SHALL BE A GOOD MATCH TO THE

BASIC MATERIAL."

ACETATE LINING CHANGES REPLACEMENT FOR RAYON

(FOR MARINE CORPS DRESS UNIFORMS)

TABLE AI. LINING MATERIAL.

CHARACTERISTIC REQUIREMENT VERIFICATION

. PARAGRAPH

. TWILL SATIN

YARNS PER INCH (MIN.)

WARP 120 288 4.5.1

FILLING 68 68 4.5.1

WEIGHT -OZ/YD 3.8 4.9 4.5.1

(MIN.)

BREAKING STRENGTH (LBS.,

(MIN)

DRY

WARP 74 83 4.5.1

FILLING 49 117 4.5.1

WET

WARP 54 54 4.5.1

FILLING 34 77 4.5.1

COLORFASTNESS TO:

PERSPIRATION (MIN.)

COLOR CHANGE 5 5 4.5.1

STAINING ON

COTTON 3.5 5 4.5.1

STAINING ON

WOOL 4.5 5 4.5.1

DRYCLEANING

COLOR CHANGE 4.5 5 4.5.1

STAINING ON

COTTON 4.5 5 4.5.1

STAINING ON

WOOL 4.5 5 4.5.1

CROCKING DRY 4.5 4.5 4.5.1

TABLE IV

TESTING REQUIREMENTS FOR ACETATE LINING CLOTH

COMPONENTS CHARACTER- REQUIREMENT TEST

. ISTIC PARAGRAPH METHOD

LINING CLOTH YARNS/INCH 3.3.2 ASTM D 3775

ACETATE

. WEIGHT 3.3.2 ASTM D 3776

. BREAK STRENGTH 3.3.2 ASTM D 5034

. COLORFASTNESS TO

. PERSPIRATION 3.3.2 AATCC 15

. DRYCLEANING 3.3.2 AATCC 132

. CROCKING 3.3.2 AATCC 8

PARA. 4.5.1.1 SAMPLING. UNLESS OTHERWISE SPECIFIED

IN SUBSIDIARY SPECIFICATIONS, SAMPLING SHALL

BE IN ACCORDANCE WITH THE FOLLOWING. THE LOT

SHALL BE UNACCEPTABLE IF ONE OR MORE SAMPLE

UNITS FAIL TO MEET ANY TEST REQUIREMENTS

SPECIFIED HEREIN.

LOT SIZE SAMPLE SIZE (SAMPLE UNIT)

800 OR LESS 2

801 THROUGH 22,000 3

22,001 AND OVER 5

THE UNIT FOR EXPRESSING LOT SIZE AND SAMPLE

UNIT FOR TESTING EACH COMPONENT SHALL BE IN

ACCORDANCE WITH THE APPLICABLE SUBSIDIARY

SPECIFICATION OR AS FOLLOWS:

COMPONENTS LOT SIZE SAMPLE UNIT

. EXPRESS AS FOR TESTING

LINING CLOTH

ACETATE YARDS 1/2 YARD

(Ref. 90271)

PARAGRAPH. 3.3.3,

LINE 5, DELETE "MIL-C-43718" AND SUBSTITUTE "A-A-52106."

PARAGRAPH. 3.3.5.1,

DELETE IN ITS ENTIRETY AND SUBSTITUTE

FRONTS FUSIBLE INTERLINING. THE FUSIBLE INTERLINING FOR THE COAT FRONTS AND CENTER BACK VENT SHALL BE A BLACK OR CHARCOAL, NAPPED, WOVEN TWILL MATERIAL CONFORMING TO TYPE II, CLASS 1, STYLE B OF MIL-C-44296. AS AN ALTERNATE, STYLE NO. T3G WEFT INSERTED KNIT OR EQUAL MAY BE

USED.

THE FUSING CONDITIONS SHALL BE AS DIRECTED BY THE SUPPLIER.

PARAGRAPH. 3.3.5.1.1,

CHEST PIECE DELETE IN ITS ENTIRETY AND SUBSTITUTE "THE FLOATING CHEST PIECE FOR THE COAT

SHALL CONFORM TO TYPE XVIII OF MIL-C-15065.

PARAGRAPH. 3.3.5.2,

FUSIBLE INTERLINING FOR SMALL PARTS DELETE IN ITS ENTIRETY AND SUBSTITUTE

THE FUSIBLE INTERLINING FOR THE FACINGS, FLAPS, POCKETS, CUFFS, SHOULDER STRAPS,COLLARS AND SLEEVE PIECES SHALL USE A BLACK OR CHARCOAL, NONWOVEN FUSIBLE INTERLINING. IT SHALL CONFORM TO EITHER TYPE V OR VI, CLASS 1, STYLE A OR B; OR TYPE VIII, CLASS 1, STYLE A, OF MIL-C- 44296.

NOTE: FUSIBLE TAPE OVERLAPPING ANY SEAM ON THE BOTTOM IS PROHIBITED."

PARAGRAPH. 3.3.7, AFTER MIL-P-15064, INSERT "AS AN ALTERNATE, THE SHOULDER PAD SHALL CONFORM

TO THE REQUIREMENTS OF INSERT "A." OF MIL-P-15064.

PARAGRAPH 3.3.11, LINE 2, DELETE "DDD-T-86" SUBSTITUTE "A-A-52071"

PARAGRAPH 3.3.12, DELETE "type of MIL-C-16375" AND SUBSTITUTE "class 1 of A-A-52097".

ADDITIONAL INFORMATION FOR MIL-C-19516G DATED 10 OCTOBER 2010

PAGE 8 PARAGRAPH 3.3.13.1 SILK THREAD REPLACEMENT: DELETE AND SUBSTITUTE:

THREAD REPLACED OPERATION

T-40 A-SILK FOR ALL SEAMING AND TOPSTITCHING

B&F NYLON B&F SILK BUTTONHOLES

B NYLON B SILK EYELETS

O NYLON O SILK FELLING

PAGE 150: ADD THE FOLLOWING NEW PARAGRAPH:

6.9 SUGGESTED SOURCE FOR THE REPLACEMENT THREAD IS UTICA THREAD CO.,458 DANBURY ROAD, NEW

MILFORD, CT 06776,(860)355-8558

PARAGRAPH 3.3.13.2,

LINE 1, DELETE "V-T-276" AND SUBSTITUTE "A-A-52094".

UNDER TYPE, DELETE IC2" AND SUBSTITUTE "III".

DELETE "IB3" AND SUBSTITUTE "I OR II:

PAGE 9, PARAGRAPH 3.3.14, DELETE LINES 1-2 "THE BUTTONHOLE...V-T-280" AND SUBSTITUTE THE FOLLOWING SENTENCE "THE BUTTONHOLE GIMP SHALL BE COTTON, CONFORMING TO SOFT FINISH (TYPE I)

OR GLAZED FINISH (TYPE II) OF A-A-50198".

PAGE 10, PARAGRAPH 3.3.15.2, line 4 after "Buttons 1966)" add "or a black that is good match to the basic material.

PAGE 10, PARAGRAPH 3.3.17.1, IDENTIFICATION LABEL, AT

THE END OF THE FIRST SENTENCE ADD "OR AS AN ALTERNATIVE

THE USE OF 4800WT TAPE FOR LABELING IS APPROVED"

PAGE 11 PARAGRAPH 3.3.17.5, DELETE THE CURRENT REQUIREMENTS FOR THE "DSCP EXCLUSIVE LABEL" IN

ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING:

"3.3.17.5 DLA TROOP SUPPORT EXCLUSIVE LABEL - EACH COAT SHALL CONTAIN THE EXCLUSIVE LABEL.

THE JACQUARD WOVEN EXCLUSIVE LABEL SHALL INCORPORATE THE DLA LOGO (ATTACHED) AND SHALL SPECIFY "MADE EXCLUSIVELY FOR DEFENSE LOGISTICS AGENCY" AND SHALL INCLUDE "BY" AND THE CONTRACTOR'S NAME. THE LABEL SHALL BE POSITIONED CENTERED AND SEWN ABOVE THE INSTRUCTION LABEL ON THE INSIDE RIGHT FRONT FACING. THE LABEL SHALL BE APPROXIMATELY 2 INCHES SQUARE AND SEWN ON ALL FOUR SIDES. THE PROPOSED FINISHED LABEL'S DESIGN SHALL BE SUBMITTED TO THE

CONTRACTING OFFICER FOR APPROVAL."

PAGE 11, AFTER PARAGRAPH 3.3.17.5 ADD NEW PARAGRAPH. 3.3.17.6.

"3.3.17.6 LABEL/TAG. EACH ITEM SHALL BE

INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR

PERSONAL CLOTHING ITEMS. THE PAPER USED FOR

THE TAGS SHALL BE STANDARD BLEACHED SULFATE

HAVING A BASIS WEIGHT OF 100 POUNDS WITH A

SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND

DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND

SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER.THE

BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL

STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT

UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL

NSNS BY THE GOVERNMENT. THE INITIALS "UPC"

MUST APPEAR BENEATH THE CODE. THE BAR CODES

FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH

DENSITY AND SHALL BE LOCATED SO THAT THEY ARE

COMPLETELY VISIBLE ON THE ITEM WHEN IT IS

FOLDED AND OR PACKAGED AS SPECIFIED. THE LABEL'S

LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC)

MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF

MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER)

OF MIL-DTL-32075.

PAGE 13, PARAGRAPH 3.6.1, LINE 3, DELETE "FED-STD-751

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND

READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S

LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC)

MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF

MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER)

OF MIL-DTL-32075.

ADDITIONAL INFORMATION FOR A-A-50196:

(NO CURRENT CHANGES TO A-A-50196B)

ADDITIONAL INFO FOR UU-P-268: UU-P-268 IS CANCELLED.

USE A-A-203C DATED 1/3/96 AND A-A-1894A DATED 5/27/93.

(ref. T0688 - 9/11/06)

ADDITIONAL INFORMATION FOR DDD-T-86:

INTERIM CHANGES TO DDD-T-86H:

NOTE - REDUCED AQLS APPLY AS FOLLOWS:

PAGE 9, LINE 9, DELETE "0.4" AND SUBSTITUTE,

"0.28", FOR MAJORS. DELETE "1.5" AND SUBSTITUTE

"1.0", FOR TOTALS.

COMMERCIAL ITEM DESCRIPTION A-A-52071

DATED 25 APRIL 1990 HAS BEEN AUTHORIZED FOR

USE IN PLACE 0F DDD-T-86H.

"THE REQUIREMENT FOR THE HERRINGBONE TAPE IS TYPE I, 3/16 INCH WIDTH AND 58 PICKS PER INCH

FROM TABLE I. PHYSICAL REQUIREMENTS."

ADDITIONAL INFORMATION FOR A-A-52071:

TAPE, TEXTILE, COTTON, FOR GENERAL USE.

ADDITIONAL INFORMATION FOR MIL-C-368:

(USE OF IMPORTED YARN AUTHORIZED FOR

CLASS 1 CLOTH)

INTERIM CHANGES TO MIL-C-368J:

PAGE 2, PARA. 1.2, ADD THE FOLLOWING:

"CLASS 4 - TWILL, 3.7 OUNCE, RELAXED FINISH.".

PAGE 3, PARA. 2.2, ADD THE FOLLOWING:

"AATCC 20 - FIBER ANALYSIS: QUALITATIVE"

PAGE 4, TABLE I, UNDER "CLASS" COLUMN, DELETE

"1" AND SUBSTITUTE "1 AND 4".

PAGE 8, ADD THE FOLLOWING NEW SUBPARAGRAPH:

"3.8.1 RELAXED FINISH. CLASS 4 CLOTH SHALL HAVE

A RELAXED FINISH APPLIED ON A TENTER FRAME

DURING THE FINISHING PROCESS.".

PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,

LINE 1, DELETE "1600" AND SUBSTITUTE "AATCC 20".

PAGE 8, TABLE II, ADD THE FOLLOWING:

"SHRINKAGE (CLASS 4) 3.8, 3.8.1 5580".

ADDITIONAL INFORMATION FOR MIL-B-371:

PAGE 2, AT THE TOP OF THE PAGE AFTER "CLASS 3" ADD "AND 4". DELETE "CLASS 4 -WATER AND

MILDEW-RESISTANT FINISH 2, 2' METHYLENE BIS (4-CHLOROPHENOL)".

PAGE 3, PARAGRAPH 2.2 OTHER PUBLICATIONS. ADD THE FOLLOWING BELOW "APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: ASTM INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA.

19428"

"AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) AATCC 20 - FIBER ANALYSIS:

QUALITATIVE (APPLICATIONS FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN ASSOCIATION OF TEXTILE

CHEMISTS AND COLORISTS (AATCC), P.O. BOX 12215, TRIANGLE PARK, NC 27709-2215)"

PAGE 4, PARA. 3.3.3, DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING: "3.3.3

POLYPROPYLENE YARN (AS AN ALTERNATIVE FOR TYPES III AND VII BRAID). THE YARN SHALL BE TEXTURED POLYPROPYLENE OF SUITABLE DENIER TO MEET THE REQUIREMENTS OF THIS DOCUMENT.

POLYPROPYLENE BRAID IS APPLICABLE ONLY TO THE ITEMS LISTED IN PARAGRAPH 6.7."

AFTER PARA. 3.3.4: ADD THE FOLLOWING NEW PARA: "3.3.5. 100% TEXTURED POLYESTER(AS AN ALTERNATIVE FOR TYPES I, II, IV, AND VI).THE YARN SHALL BE TEXTURED POLYESTER OF A SUITABLE

DENIER TO MEET THE REQUIREMENTS OF THIS DOCUMENT."

PAGE 5, PARA. 3.5.3 AFTER "CLASS 3" ADD "CLASS 4." AFTER "THE CLASS 3" ADD "AND 4".

PARA. 3.5.4, DELETE IN ITS ENTIRETY.

PAGE 8, ADD THE FOLLOWING TABLE IIA:

"TABLE IIA PHYSICAL REQUIREMENTS FOR POLYESTER BRAID

TYPE DIAMETER WEIGHT PER NUMBER OF ENDS PER

(INCHES) 144 YARDS CARRIERS CARRIER

(OUNCES)

MIN.

II 5/32+/-1/32 28.0 8 1

VII 11/32+/-1/32 25.0 44 1

NUMBER YARN PLY PICKS BREAKING

OF ENDS BRAID CORE PER INCH STRENGTH

IN CORE MIN. (LBS.) MIN.

1/ 8 2 3 10 140

- - - 22 200

1/ UNDYED COTTON CORE YARNS."

PAGE 10, PARA. 4.4.2.1 YARD-BY-YARD EXAMINATION, LINE 9, DELETE "1.5" AND SUBSTITUTE "1.0"

PAGE 13, TABLE V. END ITEM TESTS UNDER REFERENCED TEST METHOD COLUMN, LINES 4 AND 5 DELETE

"1600" AND SUBSTITUTE "AATCC 20"

(ref. T0821 - May 18, 2006)

ADDITIONAL INFORMATION FOR MIL-B-3461:

MIL-B-3461G BUTTON, INSIGNIA, METAL,

. UNIFORM AND CAP, 9/30/79;

. AMENDMENT 6 DTD 6/24/03

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-DTL-10176:

INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K:

WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE

CLOTH SHALL BE PIECE DYED.

3.7.3, LINE 2: DELETE "5.5" AND SUBSTITUTE "5.0"

ADD THE FOLLOWING PARAGRAPHS:

"3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED

, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE

FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT

AND SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN

4.4.4.

3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE

INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR

SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN

RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER

ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN

4.4.4."

PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD

EXAMINATION, LINE 3, DELETE "10" AND SUBSTITUTE

"7", LINE 4, DELETE "12" AND SUBSTITUTE "8"

TABLE II, BELOW "PH": ADD THE FOLLOWING UNDER

THEIR RESPECTIVE COLUMNS:

"WATER REPELLENCY:

SPRAY RATING:

INITIAL--------3.7.3.1---------5526

AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526

SPONGING:

COLD WATER SPONGING IS REQUIRED. A PROPER

ALCOHOL WETTING AGENT SHALL BE USED TO INSURE

SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT

FINISH IS NOT RELEASED.

THE WATER REPELLANT TREATMENT MUST BE

APPLIED BEFORE THE SPONGING OPERATION.

ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.

CODE OF FEDERAL REGULATIONS

16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES

ACT REGULATIONS.

29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH

STANDARDS.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO U.S

GOVERNMENT PRINTING OFFICE, SUPERINTENT OF

DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC

20402-9328.)

PRINCIPLES AND METHODS OF TOXICOLOGY,

A. WALLACE HAYES (EDITOR), 1989, PP 394-396.

(APPLICATIONS FOR COPIES OF REFERENCED

DOCUMENTS SHOULD BE ADDRESSED TO RAVEN

PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK,

NY 10036.)

TOXICITY. THE FINISHED CLOTH SHALL NOT

PRESENT A DERMAL HEALTH HAZARD WHEN USED

AS INTENDED.

TOXICITY ASSESSMENT. THE CONTRACTOR MUST

FURNISH INFORMATION WHICH CERTIFIES THAT

THE FINISHED PRODUCT IS COMPOSED OF MATERIALS

WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR

PROVIDE SUFFICIENT TOXICITY DATA TO SHOW

COMPATIBILITY WITH PROLONGED, DIRECT SKIN

CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD

INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION

STUDY IN LABORATORY ANIMALS AND A REPEATED

INSULT HUMAN PATCH TEST (MODIFIED DRAIZE

PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER

THE SUPERVISION OF A QUALIFIED DERMATOLOGIST

USING AT LEAST 100 FREE LIVING INDIVIDUALS.

INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH,

NAVY SHADE 3346 ONLY.

APPLICABLE WHEN PROCURING CLOTH FOR THE

FOLLOWING ITEMS:

COAT, MANS, BLUE, DRESS, MIL-C-29107

COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628

SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631

SLACKS, WOMAN'S, MIL-S-29630

TROUSERS, MANS, CLASS 12 MIL-T-41828

(REF. T0969)

ADDITIONAL INFORMATION FOR MIL-P-15064:

INTERIM CHANGE TO MIL-P-15064G:

AS AN ALTERNATE PADS, SHOULDER AND SLEEVE-HEAD

ADD "BLEACHED MUSLINETTE".

PAGE R, PARAGRAPH 3.2.1 PRINT CLOTH. ADD THE

FOLLOWING SENTENCE AT THE END OF THE PARAGRAPH

"AS AN ALTERNATE, THE TYPE IV SLEEVE-HEAD OUTER

COVER SHALL BE 100% COTTON MUSLIN WITH A MINUMUM

OF 44 WARP AND 36 FILLING YARNS PER SQUARE INCH.

TABLE I. MATERIAL REQUIREMENTS, ADD THE FOLLOW-

ING INFORMATION TO THE TABLE.

TYPE IV 44 BY 36"

PAGE 4: PARA. 3.2.2.1, LINE 2, AFTER "CLASS 1":

ADD "OR CLASS 2".

PAGE 4: PARA. 3.2.2.2,LINE 2, AFTER "UNBLEACHED"

ADD "OR BLEACHED".

PAGE 6, PARAGRAPH 3.2.6 WADDING. ADD THE FOLL-

ING SENTENCE AT THE END OF THE PARAGRAPH. "AS AN

ALTERNATE, THE TYPE IV SLEEVE-HEAD FILLER SHALL

BE 100% PRENEEDLED COTTON FILLER, WEIGHING A

MINIMUM OF 3.0 OUNCES PER SQUARE YARD AND A MAX-

IMUM OF 3.5 OUNCES PER SQUARE YARD"

PAGE 8, ADD "PARAGRAPH 3.5.10 TYPE IV. AS AN

ALTERNATE TYPE IV SLEEVE-HEAD SHALL MEASURE 15

INCHES (+/- 1/4 INCH) FOR MEN AND 13 INCHES (+/-1/4

INCH) FOR WOMEN."

PAGE 9, ADD THE FOLLOWING INFORMATION TO TABLE

II.

TABLE II. MANUFACTURING OPERATIONS REQUIREMENTS-

CONTINUED.

NO. REQUIRMENTS STITCH SEAM STITCHES THREAD

. TYPE TYPE PER INCH NDL BOB

1. CUTTING: "OR

C. THE MUSLIN SHALL BE SPLIT 3 INCHES (+/-1/8

INCH) IN THE BIAS DIRECTION."

2.CONSTRUCTION: "OR C. FOLD THE MUSLIN BIAS

STRIP TO FINISH TWO INCHES +/- 1/8 INCH. THE

COTTON FILLER WILL BE INSIDE THE FOLDED MUSLIN.

THE COTTON WILL BE CUT 2 -1/4 INCHES +/-1/8 INCH

WIDE. BOTH PIECES WILL BE SEWN WITH A STITCH

LINE APPROXIMATELY 1/2 INCH FROM THE FOLDED EDGE

OF THE SLEEVE HEAD. (SEE FIGURE 6, PAGE 37)"

301/401 EFA-1 3-4 70-2 70-2

PAGE 37, ADD FIGURE 6, SLEEVE HEAD, MAN'S AND

WOMEN'S TYPE IV."

ALTERNATE WOMEN'S PAD'S INSERT "B" REQUIREMENTS

THE SHOULDER PADS SHALL HAVE A TOP AND BOTTOM

COVER OF 4 OUNCES PER SQUARE YARD WHITE NEEDLE

PUNCHED POLYESTER FELT WHEN TESTED IN ACCORDANCE

WITH ASTM D-3776, OPTION C. THE FILLER SHALL BE

COTTON, ONE PIECE SHAPED TO FILL OUT THE PAD

WITH AN EVEN SMOOTH TAPER FROM CENTER TO ALL

EDGES. MULTIPLE PIECES ARE NOT ACCEPTABLE. THE

TOP COVER SHALL BE NOTCHED FOR SHOULDER SEAM

ALIGNMENT 4-3/4 INCHES FROM THE FRONT OF THE PAD

THE PAD SHALL BE SEWN IN A CONCAVE SHOULDER FIT-

TING FORM UTILIZING MULTI-LINE OF BASTING, TOTAL

ING 6 ROWS. THE PAD SHALL HAVE A COMPRESSED FIN-

ISHED THICKNESS MEASURING 3/8 +/- 1/8 INCH USING

A ONE INCH FOOT AT 0.1 PSI. THE FINISHED PAD

SHALL MEASURE 8-1/2 TO 9-1/2 INCHES IN LENGTH

AND 4-1/2 TO 5 INCHES IN WIDTH, WITH A 1/2 INCH

ARMHOLE CUTOUT ON EACH SIDE. THE PADS SHALL NOT

BE SIGNIFICANTLY ALTERED IN THICKNESS, SHAPE OR

DIMENSION AFTER BEING COMMERICALLY DRY CLEANED 3

TIMES WITH PERCHLOROETHELENE. THE PAD SHALL HAVE

A MINIMUM BREAKING STRENGTH OF 6.0 POUNDS IN THE

MACHINE DIRECTION AND A MINIMUM OF 3.0 POUNDS IN

IN THE CROSS DIRECTION WHEN TESTED IN ACCORDANCE

ASTM-D 5034, OPTION G-T OR G-E.

ALTERNATE MEN'S PAD'S INSERT "A" REQUIREMENTS

THE SHOULDER PADS SHALL HAVE A TOP AND BOTTOM

COVER OF 4 OUNCES PER SQUARE YARD WHITE NEEDLE

PUNCHED POLYESTER FELT WHEN TESTED IN ACCORDANCE

WITH ASTM D 3776, OPTON C. THE FILLER SHALL BE

COTTON, ONE PIECE SHAPED TO FILL OUT THE PAD

WITH AN EVEN SMOOTH TAPER FROM CENTER TO ALL

EDGES. MULTIPLE PIECES ARE NOT ACCEPTABLE. THE

TOP COVER SHALL BE NOTCHED FOR SHOULDER SEAM

ALIGNMENT 4-1/4 INCHES FROM THE FRONT OF THE PAD

THE PAD SHALL BE SEWN IN A CONCAVE SHOULDER FIT-

TING FORM UTILIZING MULTI-LINE OF BASTING, TOTAL

ING 6 ROWS. THE PAD SHALL HAVE A COMPRESSED FIN-

ISHED THICKNESS MEASURING 1/2 +/- 1/8 INCH USING

A ONE INCH FOOT AT 0.1 PSI. THE FINISHED PAD

SHALL MEASURE 9-3/4 TO 10/3/4 INCHES IN LENGTH

AND 5-3/8 TO 5-5/5 INCH IN WIDTH, WITH A 1/2 INCH

ARMHOLE CUTOUT ON EACH SIDE. THE PADS SHALL NOT

BE SIGNIFICATNLY ALTERED IN THICKNESS, SHADE OR

DIMENSION AFTER BEING COMMERCIALLY DRY CLEANED 3

TIMES WITH PERCHLOROETHELENE. THE PAD SHALL HAVE

A MINIMUM BREAKING STRENGTH OF 6.0 POUNDS IN THE

MACHINE DIRECTION AND MINIMUM OF 3.0 POUNDS IN

THE CROSS DIRECTION WHEN TESTED IN ACCORDANCE

WITH ASTM-D 5034, OPTION G-T OR G-E.

DEVIATION FROM MIL-P-15064F;

. PAGE 6, PARA. 3.5.1, LINE 4

. DELETE "7/8+1/8 INCH" AND

. SUBSTITUTE "1/2+1/8 INCH."

(Ref. T1553)

ADDITIONAL INFORMATION FOR MIL-C-15065:

INTERIM CHANGES TO MIL-C-15065

PAGE 5, PARA. 3.3.2

LINE 6, AFTER "TYPES" ADD "IV"

LINE 7, AFTER "HAVING": ADD "SINGLE"

LINE 7, DELETE *FROM 100% POLYESTER).

LINE 10, AFTER "NYLON" AND MONO-FILAMENT

INSERT "OR POLYESTER".

LINE 11, DELETE "42" AND SUBSTITUTE "41"

LINE 12, DELETE "5.6" OUNCES" AND SUBSTITUTE

"5.4 OUNCES"

LINE 13, DELETE "0.060" AND SUBSTITUTE "0.055"

FOR MEN'S COAT FRONT, TYPE XI

COAT, MANS, DRESS BLUE MC, MIL-C-19156G

PATTERN DATE, DELETE COAT FRONT 31 MAY 1988

ADD; COAT FRONTS 29 OCT 1999

INTERIM CHANGES TO MIL-C-15065J:

PAGE 8, TABLE II, LIST OF PATTERN PARTS, TYPE IX

AND X, DELETE ENTIRELY AND SUBSTITUTE:

"BASIC MATERIAL FRONT 2

. CHEST PIECE 2

. WEDGE PIECE (SHOULDER) 4

HAIRCLOTH SHOULDER PIECE 2

FELT OR FLANNEL CHESTPADDING 2"

DELETE FIGURE 7 AND SUBSTITUTE NEW FIGURE 7

ATTACHED.

Page 7.Delete "Para. 3.4" and substitute "Page 6, Para 3.34".

Line 2, after "or flannel" add "or needle punched polyester" Line 4, after "felt" add "or needle punched polyester" After para. 3.3.4.2, add the following new paragraph:

"3.3.4.3 Polyester. The polyester shall be unbleached, needle punched non-woven material.

The weight of the material shall be 3.4 (max), oz./sq. yd. The initial thickness shall be

0.055 inch and thickness after three commercial perchloethylene dry cleanings and pressings shall be 0.65 inch (max.), when tested using a 1-/8 diameter foot gage at 0.1 psi. The breaking strength in the machine direction shall be 20 lb. (min.) and in the cross machine direction shall be 40 lb. (min.) when tested as specified in ASTM D 5034. The polyester material shall not shrink or elongate more than 4.0 percent (max.) in the machine direction and 2.5 percent (max.) in the cross-machine direction after three commercial dry cleanings, when tested as specified in 4.4.1.2 (see 6.7)".

Page 10, Table II, under "Component" for "Type XVIII", after "Felt or flannel", add "or needle punched polyester" Page 11, Table II, under "Component" for "Type XXV", after "Felt", add "or needle punched polyester" Page 15, Table III, Operation 1.e., Line 1, after "or flannel" add "or needle punched polyester" Page 15, Table III, Operation 1.e.(1), Line 1, after "felt" add "or needle punched polyester" Page 15, Table III, Operation 1.e(1), for Type XVIII, line 1, after "felt" add "or needle punched polyester" Page 34, Table III, Operation 21.c., Line 1, after "felt" add "or needle punched polyester" Page 36, add the following new paragraphs:

4.4.1.2.1 Preparation of specimens. Three (3) 22 inch by 22 inch square specimens shall be cut parallel to the machine and cross machine directions to within 3 inches of the selvage from the polyester sample. An 18 inch square shall be marked as a minimum at each corner within the 22 inch specimen with indelible ink. No marks shall be closer to the edge of the specimen than 1 inch. The specimen shall be commercially dry cleaned three times using perchoethylene solvent. Samples shall be bottom steam pressed after each dry cleaning for twenty seconds in a non-locked position and vacuumed for 10 seconds.

4.4.1.2.2 Dimensional stability calculation. Each of the three 22 inches by 22 inches specimens shall be laid out without tension on a flat surface. Care should be taken that the specimens are free from wrinkles and creases. The previously measured distances marked on the specimens (initial measurement, 18 inches) in the warp direction shall be remeasured to the nearest 1/16 inch, recorded, averaged and calculated for dimensional change. The dimensional change of the sample unit (3 specimens) shall be calculated to the nearest 0.10 percent using the following formula:

Dimensional change, percent = (A-B)/A x 100

Where A = Average of initial measurements (18 inches) B = Average measurements after dry cleaning Page 44, Table V, under "Examine: for "Type XXV fronts", line 2, delete "Shoulder piece felt:" and substitute "Shoulder piece".

Page 48, add the following new paragaraph:

6.7 Polyester material. A suggested style and source for the specified material is Style CTF006-3, Product No. F012772 available from National Nonwovens, P.O. Box 150, Easthampton, MA 01027, Telephone (413) 527-3445

(Ref. T1552)

The following changes to MIL-C-15065 have been approved by the Army and Air Force as of June 2009:

Page 5, Paragraph 3.3.2: Delete paragraph in its entirety and substitute: "3.3.2 Haircloth.

The material for the shoulder pieces (types IV, VI, VII, XIV, XVII, XVIII and XXII), chest pieces and reinforcement piece for top front corners (type XI) shall be a plain weave construction with 100% spun polyester warp yarns with 100% monofilament polyester filling yarns and shall conform to the requirements in Table A (see 6.7). The material shall be undyed and contain no sizing (see 4.4.1.1) or resins.

Table A. Material requirements

Characteristic Requirement Test Method

Weight, oz/sq yd., min 5.2 ASTM D 3776

Yarns per inch, min:

Warp 52 ASTM D 3775

Filling 31 ASTM D 3775

Breaking strength, min:

Warp 160 ASTM D 5034 Filling 250 ASTM D 5034

Dry cleaning shrinkage (%), max., after 3 dry cleanings:

Warp 2.0% Commercial dry cleaning 1/ 2/ Filling 2.0% Commercial dry cleaning 1/ 2/

Stiffness, filling, load lbs., min Initial 0.120 ASTM D 747 1/ 2/ After 3 dry cleanings 0.115 ASTM D 747 1/ 2/

1/ Material shall be steam pressed between each dry cleaning.

2/ Each individual Service reserves the right to test for appearance, shrinkage, and stiffness in an end item configuration."

Page 48, Add the following new paragraph:

"6.7 Suggested Source. A suggested source for the haircloth is QST Industries, Inc., 525 West Monroe Street, Suite 1400, Chicago, IL 60661, Telephone Number (312) 930-9400. QST Part # BR-CHESTPC-50-WE has been found to meet these requirements."

ADDITIONAL INFORMATION FOR MIL-C-16375:

NOTE. A-A-52097 HAS BEEN AUTHORIZED IN

PREFERENCE TO MIL-C-16375

(Ref. T0997)

ADDITIONAL INFORMATION FOR MIL-B-17757:

MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT.

THE FOLLOWING DOCUMENTS ARE AUTHORIZED FOR USE IN LIEU

OF MIL-B-17757:

ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING

CONTAINERS.

(ref. T0857 - 6/15/06)

ADDITIONAL INFORMATION FOR MIL-C-43718:

MIL-C-43718C HAS BEEN CANCELLED

A-A-52106 HAS BEEN AUTHORIZED AS A REPLACEMENT

INTERIM SPECIFICATION CHANGES TO MIL-C-43718C:

PAGE 3, PARA. 2.2, ADD THE FOLLOWING:

"AATCC 20 - FIBER ANALYSIS: QUALITATIVE"

PAGE 5, PARA. 3.9, DELETE ENTIRELY AND

SUBSTITUTE: "3.9 SEAM EFFICIENCY. ALL STAPLE

FIBER BASED CLOTH SHALL HAVE A SEAM EFFICIENCY

OF NOT LESS THAN 80 PERCENT; WHEREAS, 100 PER-

CENT TEXTURIZED FILAMENT POLYESTER SHALL HAVE

A SEAM EFFICIENCY OF NOT LESS THAN 70 PERCENT

WHEN TESTED AS SPECIFIED IN 4.4.3."

PAGE 8, TABLE II, UNDER TEST METHOD COLUMN,

LINE 1, DELETE "1600" AND SUBSTITUTE "AATCC 20".

ADDITIONAL INFORMATION FOR A-A-52106:

INTERIM CHANGES TO A-A-52106:

PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3 CLOTH IS

INTENDED FOR USE AS LINING MATERIAL IN DRESS COATS."

ADD "CLASS 4 CLOTH IS INTENDED TO BE USED AS A

GARMENT LINING. CLASS 5 CLOTH IS INTENDED FOR USE

AS A NECKTIE AND NECKTAB OUTERSHELL FABRIC."

PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT WEIGHT

2.4 OZ; 2/1 RIGHT HAND TWILL USING 100% FILAMENT

POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4 AND CLASS 5.

CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE TWILL

PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD PAGE 1,

GENERAL DESCRIPTION. LINE 5 AFTER "YARNS" ADD

"THE CLASS 4 CLOTH SHALL BE A TW0 UP-ONE DOWN RIGHT

HAND TWILL. THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE

DOWN HERRINGBONE TWILL. THE YARNS FOR CLASS 4 CLOTH

SHALL BE SINGLE PLY WITH A NOMINAL DENIER OF 70 FOR

THE WARP YARNS AND 150 FOR THE FILLING YARNS.

PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER CLASS 3"

ADD INFORMATION FOR "CLASSES 4 AND 5"

CHARACTERISTIC CLASS 4 CLASS 5

MATERIAL CONTENT, PERCENT:

POLYESTER 100% 100%

COTTON 0 0

RAYON 0 0

COLORFASTNESS TO:

PERSPIRATION GOOD GOOD

SUBLIMATION GOOD GOOD

WET DRY-CLEANING GOOD GOOD

CROCKING (MIN.) 3.5 3/ 3.5 3/

(BLACK OR DARK

BLUE COLORS) 1.0 3/ 1.0 3/

LABILE SULFUR CONTENT 4/ 4/

WEIGHT, OZ. /SQ. YD.(MIN.) 2.4 3.0

YARNS PER INCH (MIN.)

WARP 124 140

FILLING 76 75

BREAKING STRENGTH POUNDS (MIN.)

WARP 140 160

FILLING 110 130

TEARING STRENGTH POUNDS (MIN.)

WARP 5.0 14.0

FILLING 3.0 10.5

PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER

"THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN

"THE CLASS 5 CLOTH, USING 100 % FILAMENT HERRINGBONE

TWILL." INSERT "THE CLASS 6 CLOTH POLYESTER SINGLE PLY

WITH BLACK 70 DENIER NOMINAL WARP AND AIR FORCE

BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING

100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL

IN THE WARP AND 150 DENIER NOMINAL IN THE FILLING DIRECTION."

PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS:

TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING:

PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE FOLLOWING

NEW PARAGRAPH: "2.4 COLOR. THE COLOR OF THE FINISHED

CLOTH SHALL BE AS SPECIFIED (SEE 5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR SHADE. CLASS 5

FABRIC IS MADE

FROM DYED WARP AND DYED FILLING IN TWO DIFFERENT COLORS.

CLASS 5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622 ROLL #89-2.

(ref. T1514 - 5/23/06)

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL STANDARDS

ISO 9001:2008

OR AMERICAN SOCIETY FOR QUALITY ASQ 2008 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR

BID PROPOSAL FOR EVALUATION AND APPROVAL BY DLA TROOP

SUPPORT'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT

LIMITED TO THE INTERNATIONAL STANDARDS ISO 9001

OR ASQ 2008 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION.

(ref. T1286 )

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

(ref. T0216 - May 18, 2006)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product", or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes".

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR

SHIPMENT AND STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF

MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN.

NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL

BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.