S02 - Attachment 7(c) - Technology Cut Sheets - Part 3 of 11 CPI.pdf

US & Canada +1-800-834-4969 Toronto, Ontario, Canada +905-850-7770 chatsworth.com techsupport@chatsworth.com

Latin America +52-55-5203-7525 Toll Free within Mexico 01-800-01-7592 chatsworth.com.co

Europe +44-1628-524-834 chatsworth.com

Middle East & Africa Dubai, UAE +971-4-2602125 chatsworth.ae

Asia Pacific +86 21 6880-0266 chatsworth.com.cn

Protecting your technology investment.PRODUCT DATA SHEET

Global Availability

Networked Electronic Access

Control (EAC) Swinghandle Kit provides a networked electronic lock solution for physical security of data center cabinets. Secure Array®

IP Consolidation technology connects up to 32 controllers

(32 cabinets) under one IP address, providing significant savings in networking costs.

Audit trail for regulatory compliance is available through the web interface.

Networked Electronic Access Control

SPECIFICATIONS

Audit Trail for Regulatory Compliance The web interface keeps a record of every access attempt and integrates the information with DCIM for easy reporting.

Preinstallation in CPI Cabinets Entire locking system can be shipped preinstalled within CPI Globalframe® and TeraFrame® Cabinets saving significant deployment time and costs.

Deployment Savings through Secure Array Locks can be networked through Secure Array IP Consolidation, allowing up to 32 locks to be linked under a single IP address.

Remote Access Control Remotely program, monitor and control cabinet access through a user-friendly web interface. The slim form factor controller that enables remote management can easily be mounted within 0U locations.

Smart Card Authentication Proximity card reader recognizes existing employee 125 kHz or 13.56 MHz RFID cards including HID, iClass®, MIFARE® and DESFire technologies.

ADVANTAGES

Description Smart card-based electronic access solution kit Use For indoor use only, in environmentally controlled areas. May not be used in harsh environments.

Includes

(2) Electronic Swinghandles, (1) front and (1) rear door swinghandle with integrated card reader module

• Size: Fits standard 5.9"H x 1"W (150 mm x 25 mm) swinghandle cutout (refer to installation instruction for detailed dimensions information)

• Supported Cards: 125 kHz or 13.56 MHz RFID cards with 4, 7 or 8 byte Unique Identifiers (UID) Ordered separately

• Material and Finish: Glass-filled nylon, PC/ABS (UL94-V0) Controller Module; 1.4"H x 7"W x 4"D (34.9 mm x 177.8 mm x 101.6 mm)

• Attachment: Magnetic strip

• Input Power: 100 - 240V, 50/60Hz; IEC C14 connector with detachable C13 to C14 power cord

• Network/External/Connections:

- (1) 10/100/1000 Mbps RJ-45 Ethernet connection (IPv4 and IPv6)

- (1) RJ11 Environmental Probe connection

- (1) RJ45 Secure Array In linking connection (RS-232); (1) RJ45 Secure Array Out linking connection

- (2) USB ports for firmware updates

- (2) Proprietary auxiliary ports for connecting Front and Rear Door Electronic Swinghandles

• Management Interfaces / Protocols Supported:

- HTTPS based Onboard Web interface; SNMP v1,v2 and v3; LDAP & Active Directory

Wire Harness: (1) 6’ (1.8 m) Cat 5e cable with electronic lock connectors; (1) 10’ (3.0 m) Cat 5e cable with electronic lock connectors

Door Sensors: (3) surface-mount magnetic sensors and conductor cables

• Loop type: closed

• Electrical configuration: normally open (N/O)

• Reed form: A

Certifications RoHS, FCC Part 15 Class A, En 55022; UL60950, IEC60950 (Controller only)

KEY FEATURES

• Integrated sensors for lock and latch status, monitoring and alarm functions

• Reader recognizes existing employee 125kHz or

13.56 MHz RFID cards

• Secure Array IP Consolidation links up to 32 controllers under the same IP address

• Remote unlock capability

• User-configurable unlock time delay

• Slim factor controller can be mounted in 0U spaces

• Bi-color LED (blue/magenta) to indicate lock and handle status

• Integration with LDAP and Radius for added security

• High-security lock with mechanical key override

• Available for CPI GlobalFrame® and TeraFrame® families of cabinets

• Event logging for auditing purposes

PRODUCT DATA SHEET

Interested in learning more about Electronic Access Control solutions? Call us at 800-834-4969, or email Technical Support at techsupport@chatsworth.com.

CPI now offers Extended Limited Warranties on CPI-Branded Electronic products, available for two additional years beyond the expiration of the Original Warranty Period (3 years).

Contact CPI Customer Service, or visit www.chatsworth.com/ warranty for more information.

Networked Electronic Access Control

Networked EAC Swinghandle Kit is a networked locking solution that addresses evolving security requirements for IT applications and regulatory compliance. The intelligent lock provides physical security and monitoring capabilities through a user-friendly interface.

The Networked EAC provides remote front and rear lock control and keeps a record of each cabinet access attempt. The lock is equipped with a bi-color (blue/magenta) status LED that provides a visible notification of the latch status.

Sensors in the lock generate output signals for remote access monitoring, and send notifications when conditions of the latch or door change.

The design of the swinghandle also features an efficient microprocessor-controlled gear motor that ensures minimal power consumption and accommodates both left and right doors.

Preinstallation in CPI Cabinets Networked EAC can be shipped preinstalled as a complete system within CPI GlobalFrame and TeraFrame Cabinets that have special, purpose-built routing paths for all wiring. Cabinet-level environmental monitoring is also available through integrated temperature/humidity sensors.

Optimize Deployment Costs with Secure Array IP Consolidation Through Secure Array IP Consolidation technology, which allows up to 32 controllers to be networked under one IP address, you can significantly reduce network deployment and operating costs.

Smart Card Readers and Remote Access The lock includes proximity card readers that accommodate most access control application needs. The locks open with 125 kHz or 13.56 MHz RFID smart card, including HID, iClass, MIFARE and DESFire technologies. A log of each access attempt associated with a specific user is maintained automatically. A mechanical key override is included for when network connectivity is lost.

Locks can also be remotely accessed through the software interface. Program the locks to remain open for a designated period, and they will automatically close after a user-configured timeout has elapsed. The software monitors the locks for latch condition, handle condition and door condition. If the lock is tampered with, the software logs and sends warnings to the administrative user.

Radius and LDAP authentication are supported. A local account in the software interface will need to be created in order to store the smart card ID, and assign related group cabinet access.

Networked EAC is also compatible with third-party software and can be monitored using some DCIM software such as Power IQ® for eConnect® for optimal data management.

Networked EAC Swinghandle Kit Networked EAC Swinghandle Kit includes:

• Controller Module with built-in web interface

• Front and rear swinghandles

• 3 door sensors (front and rear doors)

• 2 wiring harnesses (for front and rear connection)

• 2 mechanical override keys

Environmental Probe with Temperature and Humidity Sensor Attach up to two probes in the Controller Module using a splitter. When attached, temperature and humidity measurements are reported in through the web interface.

RF IDeas EAC Smart Card Reader Use RF IDeas EAC Smart Card Reader for programming any smart cards into the Controller Module.

EAC Smart Cards

• 13.56MHz MIFARE Smart Cards

• Sold in packs of 20

EAC Door Sensor Kit EAC Door Sensor Kit includes:

• 4 door sensors

• 4 conductor cables; 10' (3 m) each

EAC Wire Harness Kit Use EAC Wire Harness Kit as a spare if you need to connect the EAC with PDUs.

• 2 wire harnesses (for front and rear connection)

ORDERING INFORMATION

Part Number

Description Shipping Weight lb (kg)

36720-701 Networked EAC Swinghandle/Smart Card Kit 7 (3.2)

17761-003

(2) Environmental Probes with (1) Temperature and (1) Humidity

Sensor, with splitter, 2"H x 2"W 72"L (50 mm x 50 mm x 1828 mm) 1 (0.5)

17761-001 Environmental Probe with (1) Temperature and (1) Humidity

Sensor, 1"H x 1"W x 72"L (25 mm x 25 mm x 1828 mm) 1 (0.5)

17761-002 Environmental Probe Splitter, 2"H x 2"W x 6"L (50 mm x 50 mm x 152 mm) 1 (0.5)

36653-001 RF IDeas EAC Smart Card Reader 1 (0.5) 36654-001 EAC Smart Cards, Pack of 20 1 (0.5) 36652-001 EAC Door Sensor Kit 1 (0.5) 36651-001 EAC Wire Harness Kit 1 (0.5)

While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products.

©2019 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, Clik-Nut, CPI, CPI Passive Cooling, eConnect, Evolution, GlobalFrame, MegaFrame, Motive, QuadraRack, RMR, Saf-T-Grip, Secure Array, SeismicFrame, SlimFrame, TeraFrame and Velocity are federally registered trademarks of Chatsworth Products. CUBE-iT, EuroFrame and Simply Efficient are trademarks of Chatsworth Products. All other trademarks belong to their respective companies. Rev.3 05/19 MKT-60020-695

USE WITH

• GlobalFrame and TeraFrame Cabinets

• Power IQ for eConnect

36720-701

17761-001

36653-001

36654-001

36652-001

36651-001 http://www.chatsworth.com/products/cabinet-and-enclosure-systems/environmental-enclosures/ http://www.chatsworth.com/warranty

)�*+��,-./+0�� ��1 �1� ��1�

��22�3�%%�"�� ���4%5��� ���1

67/89.

�1� �1�

;+��<.�6�=*���,>/+0�

?&@����ABC

1��1 1�

,=+��D�0+E0 ����1 ����� �1��

FGHIJKILMNOPHQGOIJKRMHSHNPOLMTJUIVJMIWFXYZ[\]O\[]Ô_̀ ]̀

abcdecbfghidjkldkemhnodpqnqidirmdkgeebcidsdtbuvwbxfndexymdbvdzzz{|}~��z���}{|���

§̈©ª«¬®̄°«±²³́µ

¶dabcdgnmduqirdn·xwwdm̧gqe·mvidnghrdxnd·bfm·nodcbgimcndxvfd d¹ºmcd·bfgwmndqvd»¼½d¾l¿dcxhÀn

¶d»ÁÂdlvhwgfmnd·gwiqewmndiqmÃfbuvdebqvin

¶dkgeebcindgedibdÄÅdwºdƼ�»dÀyÇdbÈdm̧gqe·mvid

É~��

ÊË�ÌÍ�

ÎÍ�|�ÏÐ�Ï�Ñ

Ò}ÏÐÐÏÑÓÔ

ÕÍÏÓ}�

ÖÌÔ×ØÓÙ

ÚżÛÚÃÜ»¼

ÝxhÀÃÞbgvidkrmwÈod»Ádßd»¼½àdßd»Å½tddddd ddÆÚáâd··dßdÄãÅd··Ç ÚdÆ»�áÇ ä§åæ§çèé«çèê䧬ëìçäè íîïðñòóôõîöî÷øòùôúöûüýòûþÿò�ô�öûü�ð÷ò���ïð

/�001#�2�� �3��4$���

5�6 +7�89:

5�� 7�<

=>?@AB

CDEFGHIJKLMJGNOPQRS

TUUVWXYZXUY[U

\M]̂N\J_ÊL àbcdefgchcdi jklmnopqrsstupvj wxxywz{y{|}| ~haheh

�lnl��lup���onrlupvo�o�o �|x�yw�xy���x

��o�t�ln����l�p�

��x�xpv�o�t�ln��p�nl�m��tup����ppjsspnrk��tpn�t�n����ppjssp�no���on�tp��sl�kp�lp���rnpn�t����r��p�l��o�r�t�pp}��x

������������� ¡¡� �¢£¤¥¦¤§̈©�ª£«¢�¤¥¦¬̈££©ª�§̈®¥̄¤°¥̈¤±

²³́ µ³¶·̧ ¹¶·º²³»¼½¶²·

CDM¾KNQ¿MMOL¾ÀGOMQÁG\JQÂDIQSG\MQÊH\KGHQ\JOQÃÄÅQV[WXXQMONGOMQÆOÊHÇKNÈQ

ĈHÇGHIQCDM¾KNQÉÆCCÊQ̂NQ\JOQÃÄÅQUËVZ[QMONGOMQÄNGLKNÈQĈHÇGHIQCDM¾KNQÉÄCCÊQ

KÀ̂HIQ]G\JQNOÌDGNOÇQM\KGHÀOMMQM\OOÀQJKNÇ]KNOQ\̂QÍKM\OHQ\JOQ\]̂ÎĴÀOQIN̂DHÇQ

ÀDIMQ\̂Q\JOQCDM¾KN_

ÏQQÐWQÀDIMQKNOQXÎĴÀOQÀDIMQ]G\JQVÑUÒQJKNÇ]KNO

ÏQQÐXPQXÑËQKHÇQUÑËQÀDIMQKNOQXÎĴÀOQÀDIMQ]G\JQ[ÑYÒQJKNÇ]KNO

ÓÔÕÖ×ع¼ÕÕÙÚÖÛÜÙÕ¹ÝÜÞß¹àÔá¹·ÔÞÕ âãäåæçèéêëìíêçìíåçîïðñçòóôðçõõöçä÷øùúô ûüýþÿ�����������

�B?

�B��?�A��@� ?����B

�%�AA�� �

�B� %�

UËVZWÎËVX ÆCCQÄK\\ONH XQ(QVXQ(QVÑUQÉZËQ(Q[ËËQ(QW_UÊ [QOKEJWQOKEJVQOKEJËQOKEJ ZQÉX_[Ê

UËVZYÎËXË ÄCCQÄK\\ONH UQ(QXËQ(QVÑUQÉVËËQ(QZVËQ(QW_UÊ [QOKEJWQOKEJVQOKEJVQOKEJ VVQÉZ_ËÊ

UËVZYÎËVX ÄCCQÄK\\ONH UQ(QVXQ(QVÑUQÉVËËQ(Q[ËËQ(QW_UÊ [QOKEJWQOKEJVQOKEJVQOKEJ YQÉ[_WÊ

Toronto, Ontario, Canada +905-850-7770 chatsworth.com techsupport@chatsworth.com

Latin America +52-55-5203-7525 Toll Free within Mexico 01-800-01-7592 chatsworth.com.co

Europe +44-1628-524-834 chatsworth.com

Middle East & Africa Dubai, UAE +971-4-2602125 chatsworth.ae

Asia Pacific +86 21 6880-0266 chatsworth.com.cn

Protecting your technology investment.PRODUCT DATA SHEET

Global Availability

CUBE-iT™ Wall-Mount

Cabinet provides a secure, easy-to-install, swing-out storage solution for information and communications technology

(ICT) equipment. Attractive design, security features and range of optional fan kits make it ideal for public areas or equipment rooms with limited floor space.

CUBE-iT™ Wall-Mount Cabinet

SPECIFICATIONS

ADVANTAGES

Description Wall-mount enclosure with lockable front door and swing-out rear access to equipment

Use For indoor use only, in environmentally controlled areas; may not be used outdoors, in harsh environments, or in air-handling spaces

Available Sizes

• Heights: 24" (610 mm), 36” (910 mm) and 48" (1220 mm)

• Widths: 24" (610 mm); 19" EIA rack-mount

• Depths: 18" (460 mm), 24" (610 mm), 30" (760 mm)

Usable Interior Space

• Heights: 12U, 19U, 26U

• Widths: 19" EIA rack-mount

• Depths: refer to dimensional drawings on page 2

Cable Access

• (8) 1" (25.4 mm) and 3" (76 mm) knockouts, 4 top/4 bottom. Knockouts can accept 3/4” (19 mm) or 2.5” (63.5 mm) conduit

• (4) Edge-protection grommets are included for the 3" (76 mm) knockouts

• Removable top/bottom panel on rear panel *Can't remove while under load; must remove center chassis

• (1) Rectangular knockout, 9"W x 2.2"D (230 mm x 55 mm)

Equipment Support

(1) Pair L-shaped equipment mounting rails in the main cabinet body

• 19"W, EIA-310-D compliant

• Universal hole pattern, 5/8"-5/8"-1/2" vertical hole spacing

• Threaded #12-24 equipment mounting holes

• 5"D (130 mm) rear panel punched to accept accessory equipment mounting brackets, see dimensional drawings on page 2

• Includes 50 each #12-24 equipment mounting screw

Easy Access to Equipment

• Three-part, swing-out design enables easy access to the front and rear of installed equipment

Modern, Sleek Design

• Attractive design with multiple door styles and colors make it suitable for use in public areas outside of telecommunications rooms

• Low-decibel, dual-fan kit option provides quiet operation while keeping active equipment cool

Retrofit Capability

• Removable top and bottom rear panels with a rectangular knockout are perfect for retrofit deployments over existing equipment and cabling

Increased Security

• A single lock and key on the front door provides access to the cabinet; the rear section is only accessible via an internal latch inside the front door

High Load Rating

• 300 lb (136 kg) UL 2416 Listed load rating supports heavier equipment

Cable Management Features and Options

• A host of optional cable management accessories help keep cables neat and organized

KEY FEATURES

• Three-part, swing-out design allows access and service to the front and rear of equipment

• A single lock and key (CH751) on the front door provides access to the entire cabinet

• Rear panel includes 1” (25.4 mm) and 3" (76 mm) knockouts, and can accept 3/4” (19 mm) and 2.5” (63.5 mm) conduit. The 3” (76 mm) knockouts include edge-protection grommets

• Rear panel features cable tie and attachment points for accessory rack-mount brackets

• UL® 2416 Listed, 300 lb (136 kg) load rating

• Internal latch mechanism secures the rear panel;

slim-profile does not impact cabling space

• Hinge design allows the installer to remove the rear panel for easier installation on the wall

• Cabinet body includes one pair of adjustable depth 19" EIA threaded equipment mounting rails

• Cable pass-through knockout with optional brush seal makes it ideal for retrofit installations

• Optional low-decibel (31 dB), dual-fan kit provides quiet operation while cooling equipment

• Factory-prepped bonding feature provides convenience and reduces installation time

• Ships fully assembled

Chatsworth Products

Space-Saving Design and Easy Access to Equipment

CUBE-iT Wall-Mount Cabinets feature highly functional elements to provide class-leading support and storage of ICT equipment. CUBE-iT Cabinets allow easy access to the front and rear of the cabinet, making it ideal for telecommunications rooms. Additionally, high airflow vent pattern and optional low-decibel, dual-fan kit provides equipment cooling without interfering noise. The new modern, sleek design with range of options make the cabinet ideal for use in office spaces, conference rooms, classrooms, or any public spaces where floor space is limited.

The swing-out, three-part design secures equipment while maintaining ease of access for serviceability. CUBE-iT Wall-Mount Cabinet is accessed by a keyed lock on the front door.

Once unlocked, an internal latch is accessible just inside the front door on the main chassis.

Simply turn the lever to release the main chassis from the wall to gain access to the rear of equipment. Additionally, the cabinet is configurable for right or left swing.

The cabinet body delivers exceptional strength and rigidity. The UL 2416 Listed 300 lb (136 kg) load-rating provides tested support for heavier equipment. For an updated look with a robust, high-quality viewing panel, the front door has an optional tempered glass window.

Use CUBE-iT Wall-Mount Cabinet to meet growing demands, Power over Ethernet (PoE) deployments, faster wireless and premise networks, audio and video equipment, security and monitoring equipment and smart building initiatives.

The removable top and bottom rear panels feature a rectangular cable pass-through knockout with optional brush seals, providing a larger opening for cables that can accept patch panels, making CUBE-iT a great solution for retrofit and existing infrastructure, or for use with factory-terminated structured cabling.

CUBE-iT Wall-Mount Cabinet is available in three heights and three depths to support 12U, 19U or 26U of equipment.

SPECIFICATIONS

CUBE-iT™ Wall-Mount Cabinet

Load Capacity 300 lbs (136 kg) of equipment, open or closed

Certifications

• UL-2416

• cUL CSA C22.2

• UL 508A: Type 1

• NEMA Type 1

• IEC 60529 IP20

Material

• Steel sheet cabinet body, rear panel and door

• Door is extruded metal frame with solid metal or tinted tempered glass panel

• Equipment mounting rails are aluminum

Construction Riveted and bolted

Finish Powder coat paint Black or Glacier White

DIMENSIONS:

RELATED ACCESSORIES

• Universal Cable Runway

• Rack-Mount Shelf

• Foot Kit for CUBE-iT Wall-Mount Cabinet

• Saf-T-Grip® Straps

• Horizontal Rack Busbar

• Horizontal Switched eConnect® PDU

• RIM-750

• Ground Jumper

Depth

Overall - A Cabinet Body - B Max. Equipment - C

18" (460 mm) 11.7 (297 mm) 15.9 (403 mm)

24" (610 mm) 17.7" (449 mm) 21.9" (556 mm)

30" (760 mm) 23.7" (602 mm) 27.9" (708 mm)

NOTE: Maximum equipment depth denotes values that still allow the center chassis to swing away from rear panel.

CUBE-iT™ Wall-Mount Cabinet

ORDERING INFORMATION:

Part Number

Cabinet Depth

Door Style Shipping Weight lb (kg)

24”H (610 mm) CUBE-iT Cabinet

11890-X24 18” (460 mm) Solid 90 (40.9)

11901-X24 18” (460 mm) Tempered Glass 90 (40.9)

11840-X24 24" (610 mm) Solid 101 (45.9)

11900-X24 24" (610 mm) Tempered Glass 101 (45.9)

11996-X24 30” (760 mm) Solid 112 (50.9)

12419-X24 30” (760 mm) Tempered Glass 112 (50.9)

36”H (910 mm) CUBE-iT Cabinet

11890-X36 18” (460 mm) Solid 114 (51.8)

11901-X36 18” (460 mm) Tempered Glass 114 (51.8)

11840-X36 24" (610 mm) Solid 128 (58.2)

11900-X36 24" (610 mm) Tempered Glass 128 (58.2)

11996-X36 30” (760 mm) Solid 142 (64.5)

12419-X36 30” (760 mm) Tempered Glass 142 (64.5)

48"H (1220 mm) CUBE-iT Cabinet

11890-X48 18” (460 mm) Solid 139 (63.2)

11901-X48 18” (460 mm) Tempered Glass 139 (63.2)

11840-X48 24" (610 mm) Solid 155 (70.5)

11900-X48 24" (610 mm) Tempered Glass 155 (70.5)

11996-X48 30” (760 mm) Solid 171 (77.7)

12419-X48 30” (760 mm) Tempered Glass 171 (77.7)

CUBE-iT Wall-Mount Cabinets

• Attaches to the wall with included installation hardware

• Available in 12U, 19U and 26U heights, with solid metal or tempered glass door options

• All cabinet styles are 24"W (610 mm)

• Includes CH751 keyed lock

Note: X=Color; 7=Black and E=Glacier White

ACCESSORIES:

Vertical Cabling Section for CUBE-iT Wall-Mount Cabinet

• Attaches to the outside edge of equipment mounting rails

• 4U height; openings align with rack-mount unit spaces on equipment mounting rails

• Sold in pairs

• Order additional kits as-needed per cable management requirements

Vertical Lashing Bracket for CUBE-iT Wall-Mount Cabinet

• Provides multiple lashing points for premise cables

• Attaches to center chassis with included hardware

• Adjustable front-to-rear

Part Number

Description Shipping Weight lb (kg)

40971-X24 24”H x 4”W (610 mm x 100 mm) 4 (1.8)

40971-X36 36”H x 4”W (910 mm x 100 mm) 6 (2.7)

40971-X48 48”H x 4”W (1220 mm x 100 mm) 8 (3.6)

Note: X=Color; 7=Black and E=Glacier White

P/N 11900-724 shown

Standard Fan and Filter Kit for CUBE-iT Wall-Mount Cabinet

• Pressurizes interior of the cabinet, forcing warm air out of open vents

• Assembly Includes 1 fan, 1 filter, and 1 vent cover

• Noise Level: 39 dB (measured at 3' (1 m) distance)

• Airflow: 115 CFM (170 CMH)

• 6'L (1.8 m) NEMA 5-15P/6-15P Power Cord

Part Number

Description Shipping Weight lb (kg)

40972-001 115 Volt, 50/60 Hz, 5-15P power cord 2 (0.8)

40972-002 230 Volt, 50/60 Hz, 6-15P Power cord 2 (0.8)

40973-001 Replacement Filter Kit, Pack of 5 2 (0.8)

Low-Decibel Dual-Fan and Filter Kit for CUBE-iT Wall-Mount Cabinet

• Pressurizes interior of the cabinet, forcing warm air out of open vents

• Assembly Includes 2 fans and 2 filters

• Noise Level: 31 dB (measured at 3' (1 m) distance)

• Recommended placement on bottom right and left sides of the cabinet

• Airflow: 120 CFM (204 CMH)

• 6'L (1.8 m) NEMA 5-15P/6-15P Power Cord

Part Number

Description Shipping Weight lb (kg)

40975-001 115 Volt, 50/60 Hz, 5-15P power cord 4 (1.8)

40975-002 230 Volt, 50/60 Hz, 6-15P Power cord 4 (1.8)

40973-001 Replacement Filter Kit, Pack of 5 2 (0.8)

Part Number

Description Shipping Weight lb (kg)

40970-704 4U, 7"H x 0.5"D (178 mm x 13 mm) 3 (1.4)

40970-707 7U, 12.3"H x 0.5"D (311 mm x 13 mm) 3 (1.4)

40970-711 11U, 19.3"H x 0.5"D (489 mm x 13 mm) 4 (1.8)

Color is black.

Interested in learning more about CUBE-iT Enclosure solutions? Call us at 800-834-4969, or email Technical Support at techsupport@chatsworth.com.

CPI now offers Extended Limited Warranties on CPI-Branded Electronic products, available for two additional years beyond the expiration of the Original Warranty Period (3 years).

Contact CPI Customer Service, or visit www.chatsworth.com/ warranty for more information.

CUBE-iT™ Wall-Mount Cabinet

While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products.

©2018 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, Clik-Nut, CPI, CPI Passive Cooling, eConnect, Evolution, GlobalFrame, MegaFrame, OnTrac, QuadraRack, RMR, Saf-T-Grip, SeismicFrame, SlimFrame, TeraFrame and Velocity are federally registered trademarks of Chatsworth Products. CUBE-iT, EuroFrame, Motive, Secure Array and Simply Efficient are trademarks of

Chatsworth Products. All other trademarks belong to their respective companies. Rev.11 02/18 MKT-60020-701

ACCESSORIES:

Cable Port Brush Kit for CUBE-iT Wall-Mount Cabinet

• Optional cover when rectangular knockout on the rear panel is removed

• Seals opening around cables with brush seal

• Sold in pairs

Part Number

Description Shipping Weight lb (kg)

25190-000 0.8”H x 10.6”W x 2.9”D

(20 mm x 268 mm x 74 mm) 2 (0.9)

Horizontal Wire Management Bar for CUBE-iT Wall-Mount Cabinet

• Attaches to the rear of the equipment mounting rails

• Secures premise cables after termination on patch panels

• Includes mounting hardware and 12 cable ties

Part Number

Description Shipping Weight lb (kg)

11837-701 1.5”H x 19.3”W x 3.7”D

(38 mm x 490 mm x 94 mm) 4 (1.8)

Power Strip for CUBE-iT Cabinets

• Select straight or locking plug style

• 115 VAC; 15 Amp or 20 Amp

• 10'L (3 m) power cord and circuit breaker

• Includes (8) 5-20R outlets

Part Number

Description Shipping Weight lb (kg)

12820-701 15A Power Strip, NEMA 5-15P 4 (1.8)

12820-702 15A Power Strip, NEMA L5-15P 4 (1.8)

12820-705 20A Power Strip, NEMA 5-20P 4 (1.8)

12820-706 20A Power Strip, NEMA L5-20P 4 (1.8)

Equipment Mounting Rail Kit for CUBE-iT Wall-Mount Cabinet

• Use with equipment that needs front and rear support

• Sold in pairs

• Aluminum material

Part Number

Description Shipping Weight lb (kg)

12787-524 12U; For 24”H (610 mm) cabinet 4 (1.8)

12787-536 19U; For 36”H (910 mm) cabinet 6 (2.7)

12787-548 26U; For 48”H (1220 mm) cabinet 8 (3.6)

Note: CUBE-iT Wall-Mount includes one pair of Equipment Mounting Rails

90˚ Mounting Bracket for CUBE-iT Cabinets

• Attaches to rear panel on CUBE-iT Cabinets

• Creates a 19” EIA x 2U vertical rack-mount space

• 2 brackets per kit, 3.9”H x 1”W x 4”D

(99 mm x 25.4 mm x 101.6)

Part Number

Description Shipping Weight lb (kg)

13285-501 2U, 1 pair, Clear finish 3 (1.4)

LED Light Kit for CUBE-iT Cabinets

• Attaches to the bottom, top or side of CUBE-iT Cabinets

• Toggle switch, 4W LED light

• Detachable, 120 VAC with NEMA 1-15P Power Cord

Part Number

Description Shipping Weight lb (kg)

12803-701 LED Light Kit, 4W, 120 Vac 2 (0.9)

Rack-Mount Shelf

• For use with small equipment such as modems, routers and fiber modules in 19” EIA racks

• 1U; Includes multiples tie-down points

• Supports up to 20 lb (9.1 kg) of equipment

Part Number

Description Shipping Weight lb (kg)

40974-X19 Rack-Mount Shelf, 1U x 19”W x 10”D

(483 mm x 250 mm) 4 (1.8)

Foot Kit for CUBE-iT Wall-Mount Cabinet

• For use on desktops or floor when not installed on a wall

• Pack of 4

Part Number

Description Shipping Weight lb (kg)

13483-001 Foot Kit 2 (0.9)

Ground Jumpers

• Provide common bonding from equipment rack or cabinet to halo conductor

• Available individually or in packages of 10

• Constructed of UL Listed components

Part Number

Description Shipping Weight lb (kg)

40159-009 9’ (2.7 m) Ground Jumper, 1 Each 2 (0.9)

40159-019 9’ (2.7 m) Ground Jumper, 10 Each 20 (1.9)

Note: X=Color; 7=Black and E=Glacier White

Note: Surge-protected options available http://www.chatsworth.com/products/cabinet-and-enclosure-systems/environmental-enclosures/

+,-./011 2113441567.8/6,819:.168168;<./1=764467.-.:/>1?84.//1,-<.:@6/.1/A.;6B6.C1 D11E8/-9449-6,817?/-1;,8B,:71@6-<19441:.49-.C189-6,894198C14,;941;,C./11 F113441G:9;H.-1H6-/19:.1/,4C1/.A9:9-.4IJ1K,,44.//17,?8-68L1M?--,8/19:.168;4?C.C1B,:168/-9449-6,81681NOE1;9M68.-/J11 P11Q,:17,:.168B,:79-6,8R1A4.9/.1;,8-9;-1K.;<1S?AA,:-19-1TUVWXYZZ[\T]VŴTX_[\TẀV[a bcdefghdi jkllmnnnnnnnnonnnnnnnnpqnnnnnnnomkrstnuvwxl yDz2{1N<9-/@,:-<1O:,C?;-/R1E8;J1

3441:6L<-/1:./.:|.CJ

3441A:,C?;-/1}?,-.C19:.1/?M~.;-1-,1 9|9649M646-I1M9/.C1,81798?B9;-?:68L1

;9A9;6-I198C1/<6AA68L1C9-./1/<,?4C1M.1

;,8/6C.:.C1./-679-./1,84IJ1

�<64.1.|.:I1.BB,:-1<9/1M..8179C.1-,1

.8/?:.1-<.19;;?:9;I1,B1944168B,:79-6,8R1

NOE1C,./18,-19;;.A-1469M646-I1B,:198I1

.::,:/1,:1,76//6,8/198C1:./.:|./1-<.1:6L<-1 -,1;<98L.168B,:79-6,8198C1C./;:6A-6,8/1,B1 46/-.C1/.:|6;./198C1A:,C?;-/J1 rjj

.N,88.;-1�.:-6;941O5�R1�,86-,:.CR

�D2�DzR12zB-1�F7�R 2Dz�Dz��1K<:..1O<9/.1E8A?-R1Dz3R1 �F��1N2F1���1N2{1�?-4.-/R1Dz��1�?-A?-bcdefghdi jkllmnnnnnnnnonnnnnnnnpqnnnnnnnomkrstnuvwxl yDz2{1N<9-/@,:-<1O:,C?;-/R1E8;J1

3441:6L<-/1:./.:|.CJ

3441A:,C?;-/1}?,-.C19:.1/?M~.;-1-,1 9|9649M646-I1M9/.C1,81798?B9;-?:68L1

;9A9;6-I198C1/<6AA68L1C9-./1/<,?4C1M.1

;,8/6C.:.C1./-679-./1,84IJ1

�<64.1.|.:I1.BB,:-1<9/1M..8179C.1-,1

.8/?:.1-<.19;;?:9;I1,B1944168B,:79-6,8R1

NOE1C,./18,-19;;.A-1469M646-I1B,:198I1

.::,:/1,:1,76//6,8/198C1:./.:|./1-<.1:6L<-1 -,1;<98L.168B,:79-6,8198C1C./;:6A-6,8/1,B1 46/-.C1/.:|6;./198C1A:,C?;-/J1 � rjj

.N,88.;-1�.:-6;941O5�R1�,86-,:.CR

�D2�DzR12zB-1�F7�R 2Dz�Dz��1K<:..1O<9/.1E8A?-R1Dz3R1 �F��1N2F1���1N2{1�?-4.-/R1Dz��1�?-A?-

/�001#�2�� �3��4$���

5�6 +7�89:

5�� 7�<

=>?@AB

CDEFGHIJKLMJGNOPQRS

TUUVWXYZXUY[U

\M]̂N\J_ÊL àbcdefgchcdi jklmnopqrsstupvj wxxywz{y{|}| ~haheh

�lnl��lup���onrlupvo�o�o �|x�yw�xy���x

��o�t�ln����l�p�

��x�xpv�o�t�ln��p�nl�m��tup����ppjsspnrk��tpn�t�n����ppjssp�no���on�tp��sl�kp�lp���rnpn�t����r��p�l��o�r�t�pp}��x

������������� ¡¡� �¢£¤¥¦¤§̈©�ª£«¢�¤¥¦¬̈££©ª�§̈®¥̄¤°¥̈¤±

���¡�²³́ �²³µ��¶·�²�³

RMOQ̧̂NG¹̂H\KºQ»KEFQĈH¼GHIQCDM½KNQ¾̂NQÊHM̂ºG¼K\GHIQO¿DGÀLOH\Q½̂H¼GHI_Q

Á̂HM\NDE\O¼Q̂¾Q[ÂVWÃÄ\JGEFQÅQ[ÂUÃ̧QÆU_ÇW[QLLQÅQVÈ_VQLLÉQJKN¼Ä¼NK]HQOºOE\N̂ºÊ\GEQ

\̂DIJQÀG\EJQVVËQKºº̂ÊQÊÀÀONQ½KNQ]G\JQOGIJ\QÌWÄ[XQ\KÀÀO¼QºDIQL̂DH\GHIQĴºOMQ̂HQ

VÃQÆXZ_UQLLÉQEOH\ONMQKH¼Q\]̂QÀKGNMQ̂¾QZÂVWÃQÆÇ_È[YQLLÉQ¼GKLO\ONQĴºOMQMÀKEO¼Q

[ÂUÃQÆVÈ_VQLLÉQKÀKN\Q¾̂NQK\\KEJGHIQIN̂DH¼QÍDLÀONM_

ÎQÏ\JONQÊHÐIDNK\ĜHMQKÑKGºK½ºOQ̂HQNO¿DOM\

ÎQRÒÓQÒGM\O¼

ÔKN\QHDL½ONQÊHMGM\MQ̂¾QCDM½KNQKH¼QKQJKN¼]KNOQFG\Q\JK\QGHEºD¼OMÕ

ÎQÆVÉQMÀºGEOQÀºK\OQ½KNPQ[ÃÒQÆYËQLLÉ

ÎQÆXÉQÌVXÄXUQÊÀÀONQLKEJGHOQMENO]M

ÎQÆXÉQÌVXQÊÀÀONQÖK\Q]KMJONM

ÎQÆYÉQÌWÄ[XQÊÀÀONQLKEJGHOQMENO]M

ÎQÆYÉQÌWQNGHIQ\ONLGHKºM

×ØÙÚÛØÜÝÞßàáÞâãàäØÜåÚÜæàäçèéÞÙ

VÈÃQNKEFQ]G¼\JQCDM½KNQMĴ]H

êë?ì í>îïB?

ðBñò?óAìó@ô õöóAAóô÷ø ùBó÷öì úïøûü÷ý

VËWVËÄËVÈ »KEFQĈH¼GHIQCDM½KNPQVÈþÿQÆUYX_WQLLÉQ»KEF XQÆË_ÈÉ

VËWVËÄËX[ »KEFQĈH¼GHIQCDM½KNPQX[þÿQÆZYU_XQLLÉQ»KEF [QÆV_UÉ

VËWVËÄË[Z »KEFQĈH¼GHIQCDM½KNPQ[ZþÿQÆYYÈQLLÉQ»KEF UQÆV_YÉ

Openpath Standard Smart Reader v2

Flush mounted in gang box

Surface mounted on the wall

Surface mounted with casing and snap cover exposed

The Openpath door reader leverages industry leading security combined with an elegant design that will enhance any door and office environment. The Smart Reader v2 is a multi-technology reader that supports both low (125 kHz) and high (13.56 MHz) frequencies. The standard reader can be flush mount inside a single gang box, providing a slim profile.

Openpath creates smart security solutions for the modern office.

The company’s flagship product, Openpath Access, combines sleek hardware with an app, enabling employees to enter the office using their smartphone. Unlike legacy systems, Openpath’s software is cloud-based, meaning Access easily scales with your business and seamlessly integrates with platforms like G Suite and Azure AD.

Openpath’s patented SurePath Mobile technology ensures reliability and quick entry via Bluetooth, Wi-Fi and LTE. With encryption at every level and powerful, user-level permissions, Openpath Access is both more secure and more dynamic than traditional access control systems. Openpath Access’ streamlined, customizable features make office management easier than ever.

Openpath Access access control for the modern workplace

OP-R2-STND

Standard Smart Reader v2 for more information visit openpath.com contact us to get started: 1-844-673-6728 | sales@openpath.com

Features

• Snap-on faceplate

• Modern design, can seamlessly blend into or upgrade the aesthetics of any entry

• Indoor/outdoor design

• Supports auxiliary Wiegand readers connected through the Openpath reader

• Functions seamlessly with the mobile application

• Available on both Android and iOS

• Works with Smart Watches in addition to the mobile app

• Supports remote unlocking with user-level privileges

Installation

• Easy installation via RS-485 wiring

• Compatible with legacy Wiegand wiring

Security

• Fully encrypted communication between mobile app and controller

• Fully encrypted communication between Openpath key cards and reader

• Eliminates the threat of copying or cloning Openpath key cards

System Compatibility

• Reader works with Openpath Access System including Openpath controllers, cloud management software, and mobile app

Dimensions

Connections to Auxiliary

Temperature should not exceed -30°C to 60°C (-22°F to 140°F)

Wiegand Reader

Primary Controller

Connections

PIGTAIL color Name (short) Name (full)

Gray GND Ground (RTN) Blue +B RS485-B Violet -A RS485-A Orange VIN +12V IN

Red VO Wiegand Voltage Black GND Wiegand RTN Green WD0 Wiegand Data 0 White WD1 Wiegand Data 1 Brown LED Wiegand LED Yellow BUZZER Wiegand Buzzer

OP-R2-STND

Standard Smart Reader v2

Smart Reader v2

• Openpath DESFire EV2

• MIFARE Classic/DESFire/Ultralight (ISO14443A) CSN

• Openpath Proximity

• HID® Proximity

• LenelProx®

Card Compatibility

Cloud Managed

Form

Color

Frequency

NFC

Openpath Prox Cards/Fobs

HID® Prox

LenelProx®

Openpath DESFire EV2

MIFARE/DESFire (CSN)

Standards

Certification

Yes

Standard

Black, White

125 kHz, 13.56 MHz

Yes

Yes

Yes

ISO 14443A, Prox

FCC, UL 294, CE

Yes

Yes

Yes

Openpath Bluetooth Yes

Auto Proximity Unlock Yes

Environmental IP65

Wave to Unlock/Touch Yes

• With back cover, no gang box: 7.4 x 12.0 x 2.3 cm (2.9 x 4.7 x 0.9 in)

• No back cover, on gang box: 7.4 x 12.0 x 1.1 cm (2.9 x 4.7 x 0.43 in)

• Reader works with legacy access control systems via Mobile Gateway option

• Includes tamper resistant secure storage for more information visit openpath.com contact us to get started: 1-844-673-6728 | sales@openpath.com

• Lifetime warranty

Power Rating

• 0.25A @ 12VDC

• 0.12A @ 24VDC

Specifications

Toronto, Ontario, Canada +905-850-7770 chatsworth.com techsupport@chatsworth.com

Latin America +52-55-5203-7525 Toll Free within Mexico 01-800-01-7592 chatsworth.com.co

Europe +44-1628-524-834 chatsworth.com

Middle East & Africa Dubai, UAE +971-4-2602125 chatsworth.ae

Asia Pacific +86 21 6880-0266 chatsworth.com.cn

Protecting your technology investment.PRODUCT DATA SHEET

Availability: US, Canada, Latin America, Europe and Middle East

RMR® Swing Wall-Mount

Enclosure is an advanced industrial enclosure engineered to protect equipment with cutting-edge sealing technology, certified ingress protection ratings, and multiple equipment mounting options to support

IT equipment, automation electronics and electrical controls and instrumentation in nonhazardous indoor locations.

RMR® Swing Wall-Mount Enclosure

SPECIFICATIONS

Provides equipment with NEMA Type 12 and IP 55 rated protection against ingress of solid foreign objects and dripping noncorrosive liquids, using advanced formed-in-place foam gasket technology at each opening and cable entry point

Enables quick access to the front and rear of equipment through a double-hinged, swing-out design

Supports airflow and cooling options specially certified for industrial applications to maintain equipment cooling requirements outside of normal IT settings and equipment rooms

Features attachment points along the front, rear, top, bottom and sides, providing quick and secure mounting of plates, rails and accessories at any point along the frame

Allows a complete enclosure solution to be configured under a single part number, including the exact size frame, mounting system, door, gland plates and ventilation that you require

Offers short lead times for modified enclosures– change size or color, and add openings for connections, controls and HMI

ADVANTAGES

Industry Standards

Industrial Control Panel Enclosure, NEMA Type 12, IP 55 Enclosure is rated for indoor use and protects equipment against the ingress of dust, lint and other debris, as well as dripping and splashing noncorrosive liquids.

Type 12 Enclosures are:

- UL Listed, Industrial Control Panel Enclosures, Type 1, 2, 3R, 5 and 12; File Number NITW.E473128

- UL Listed, Industrial Control Panel Enclosures for Canada, Type 1, 2, 3R, 5 and 12, File NITW7.E473128

- UL Classified to IP 55 Degrees of Protection by Enclosures Certified to IEC Publication, EOFI.E486325

RoHS, REACH

Cabinet Includes Enclosure with swing-out chassis and hinged, swing door Equipment mounting rails and/or mounting panels/personalized support options Metric hardware

Overall Dimensions

Heights:

- 9U, 19.1” (486 mm) - 18U, 34.9” (886 mm)

- 12U, 24.4” (619 mm) - 21U, 40.1” (1019 mm)

- 15U, 29.7” (753 mm) - 26U, 48.9” (1241 mm) Widths: 23.6” (600 mm) and 27.6” (700 mm) Depths: 20.0” (510 mm), 24.0” (610 mm) and 29.9” (760 mm)

Equipment Space 19" EIA (482.6 mm) Equipment Mounting Rails: (1 pair) or (1) Fixed Depth Mounting Plate

Load Ratings 9U - 18U, 19.2" (486 mm) - 34.9" (886 mm): 110 lb (50 kg) 21U and 26U, 40.1" (1019 mm) - 48.9" (1241 mm): 250 lb (113 kg)

KEY FEATURES

• Fully welded enclosure, sealed with formed-in-place foam gasket technology to guarantee NEMA Type 12 and IP 55 protection ratings

• Accessible three-part design provides front and rear access to equipment

• Available with solid metal or tempered glass door

• Optional mounting plates provide support for instrumentation and systems control automation electronics

• Optional 19"EIA Mounting Rail Kit provides support for rack-mount networking, compute and storage equipment

• Optional cable management accessories available

• Optional thermal management and sealing options available

RMR Swing Wall-Mount Enclosure

SPECIFICATIONS

Materials and Construction

Plates:

- Steel enclosure, welded construction

- Steel Mounting Plates and Doors, attach to enclosure with hardware Sealing:

- Formed-in-place foam gaskets; metric hardware

Doors

Door is removable and can be replaced if damaged Door has a Quarter-Turn Wing Knob with CH751 Keyed Lock Door options include:

- Single Solid Metal Door

- Single Tempered Glass Door, with high impact .25" (6 mm) thick glass

Certifications/ Compliance

NEMA Type 12 and IEC 60529, IP 55 All enclosures are:

- UL Listed, Industrial Control Panel Enclosures, Type 12, File Number NITW.E473128

- UL Listed, Industrial Control Panel

- UL Listed, Industrial Control Panel Enclosures for Canada, Type 12, File NITW7.E473128 Enclosures without filter fans or air conditioners are:

- UL Classified, Degrees of Protection by Enclosures Certified to IEC Publication, EOFI.E486325

EIA-310-E (for 19”EIA equipment rails)

Finishes Enclosure assembly is welded, welds are ground smooth and enclosure is finished with powder coat paint Color options: Black or Hammer Gray (RAL 7035)

Description Wall-mounted enclosure with hinged, three-part design, certified with NEMA Type 12 and IP 55 ratings to protect IT automation and control equipment

Installation

Standard design features prepunched holes in rear section for use with lag bolts or machine screws

Hardware washers feature gaskets and close-fit mounting holes to maintain NEMA Type 12 and IP 55 ratings Mounting brackets available

Equipment Support

All equipment support options are electrically bonded to the frame and painted to match enclosure Enclosures are comprised of three sections: a rear section that mounts to the wall, a center section that hinges open and a front door Each enclosure includes (4) PEM studs on the rear of the attaching a rear mounting panel Each center section includes punched attachment points along the sides spaced on 1"D (25 mm) increments and 1.75"H (44.45 mm) increments 19” EIA (482.6 mm) Equipment Rails:

- 12-24 tapped or square-punched mounting rails, 2 pairs

- Adjustable depth; attaches to frame or optional horizontal support slides

- Feature 1.75” (44.45 mm) U spacing (vertical), EIA-310-E

Universal Hole Spacing

- Electrically bonded to frame

Rear Equipment Mounting Panel:

- Attaches to the rear section of the enclosure

Adjustable Depth Equipment Mounting Panel:

- Attaches to center section

Airflow/Ventilation

Side Panels:

- Optional square-shaped fan/filter opening on each side panel for quick installation access

- Other penetration options available upon request

Rear Section

- Solid (no ventilation)

- Upper and lower gland plates for fan/filter access

- Nonrated brushes, sized to fit in place of gland plate

- Other opening options available upon request

Grounding/Bonding Solutions

Door and rear section are bonded to the center section with ground jumpers Rear section includes a two-point connection for service grounding Grounding wires included on all enclosures

Cable Entry

Standard panels are solid Rear Section, top and bottom may include optional sealed openings with removable solid gland plates or brushed covers (brush covers change rating to NEMA Type 1)

Additional Accessories

Cable tie slots located on the mounting rails Optional Short Finger Cable Manager Optional Vertical Lashing Brackets Optional Front-to-Rear Lashing Bracket Kitting and optional preinstallation with accessory purchase

Cabinet is comprised of

- Front Door

- Center Section

- Rear Section

Equipment mounting options include:

- Fixed Depth Mounting Plate for Rear Section

- Adjustable Depth Mounting Plate for Center Section

- Multi-Mount (Square-Punched) mounting rails for Center Section

RMR Swing Wall-Mount Enclosure

PRODUCT INFORMATION

NEMA Type 12 and IP 55 Ratings for Nonhazardous Indoor Locations Chatsworth Products (CPI) RMR Swing Wall-Mount Enclosure provides exceptional protection for network, communication, automation and control equipment in nonhazardous indoor locations. The RMR Swing Wall-Mount Enclosure features welded steel panels with robotically applied, formed-in-place foam gaskets and optional sealed cable entry points. These features effectively maintain the enclosure’s NEMA 12 and IP 55 protection ratings, which certify that the equipment is protected from the intrusion of solid foreign objects such as dirt, dust, lint and fibers, as well as noncorrosive liquid such from dripping and light spray or splashing. The RMR Swing Wall-Mount Enclosure features a solid or windowed front door equipped with a CH751 key-latch for security purposes. The robust design of the RMR Swing Wall-Mount Enclosure protects personnel from hazardous moving parts and electrical equipment within the enclosure.

The RMR Swing Wall-Mount Enclosure is a completely sealed, solid enclosure that features many modification possibilities. Many ventilation and cooling options are available to meet airflow requirements, and multiple cable entry points and accessories are available for configuration with short lead time.

Accessible Three-Part Design The RMR Swing Wall-Mount Enclosure features a three-part design with a solid rear section, hinged center section and a solid or windowed front door, equipped with a CH751 key-latch for security purposes. The enclosure’s center section enables the front portion to release, swinging away from the wall section to provide front and rear access to equipment. This allows for quick installation and maintenance, which limits the amount of time that sensitive equipment is exposed to the environment. As a security measure to prevent unauthorized access, the center section of the RMR Swing Wall-Mount Enclosure is only accessible when the front door is unlatched.

Expanded Equipment Support All RMR Enclosures feature configurations that include 19” EIA (482.6 mm) rails or mounting plates. These options ensure compatibility with a number of electronic installations that extend beyond communications and network devices to include automation and control equipment. Attachment points are punched around the interior perimeter of the frame, providing top-to-bottom, front-to-back and side-to-side mounting locations for accessories.

Enhanced Cable Management Options The RMR Fixed Wall-Mount Enclosure may be ordered with top and/or bottom cable openings that are sealed with removable gland plates for NEMA Type 12 or IP 55 protection or a brush seal, which reduces protection rating to NEMA Type 1.

Many of CPI’s top-rated accessories such as Short Finger Cable Mangers and Vertical Lashing Brackets are available for the RMR Swing Wall-Mount Enclosure. In addition, a Front-to-Rear Cable Lashing Bracket has been developed for use with the RMR Swing Wall-Mount Enclosure. This new accessory attaches to the frame and aligns with each U space to provide a dedicated front-to-rear pathway, preventing high volume cabling from dropping into the U space below.

Quality Airflow with Enhanced Environmental Protection CPI can modify the standard RMR Swing Wall-Mount Enclosure with openings for filtered fan kits or closed-loop cooling units, while maintaining the enclosure’s NEMA Type 12 and IP 55 protection ratings. Filtered fan kits mount to the enclosure’s side panels and are available in a range of airflow specifications and voltages. A variety of cooling unit options is available to meet the demands of indoor NEMA Type 12 applications.

Modified Enclosures CPI offers modified enclosures with short lead times. Additional sizes and colors are available. Specify a variety of openings for cable entry, controls and HMI. Select, kit or have CPI preinstall accessories, all in a manner that maintains NEMA Type 12 and IP 55 protection ratings. Contact CPI Technical Support to request a modified enclosure.

Interested in learning more about our RMR Industrial Enclosures? Call us at 800-834-4969 or email Technical Support at techsupport@chatsworth.com

RMR Swing Wall-Mount Enclosure

A 3 - H W D FR - FD RD SP L - C BP TP

9. Latch 2 Quarter-Turn Wing Knob with CH751 Keyed Lock

10. Color C Black G Hammer Gray RAL 7035

12. Top Panel 1 Solid 2 Gland Top Plate 3 Brush Gland

For the full line of enclosure configurations, use the RMR Product Designer at www.chatsworth.com/product-designer. For additional assistance, contact Technical Support at 800-843-4969.

RMR Swing Wall-Mount Enclosure Matrix:

1. Type Double-Hinged 3

4. Depth in mm

20.0 510 A

24.0 610 B

29.9 760 C

6. Front Door Single Solid Metal Door 1 Single Tempered Glass Door 2

7. Rear Door 1 Not Applicable

8. Side Panel 1 Single Solid 2 Intake Filter Fan, 4.9" (125 mm), 38 CFM (65 CMH), 115 VAC

4 Cooling Unit, 900-1300 Btu/hr (263-381 W), 115 VAC

11. Bottom Panel 1 Solid 2 Gland Plate 3 Brush Gland

2. Height U in mm 9 19.1 486 1

12 24.4 619 2 15 29.7 753 3 18 34.9 886 4 21 40.1 1019 5 26 48.9 1241 6

3. Width in mm

23.6 600 1

27.6 700 2

5. Frame Style Multi-Mount (Square-Punched) Rails, 1 Pair, 19" EIA (482.6 mm)

A

Fixed Depth Mounting Plate B

Multi-Mount (Square-Punched) Rails, 1 Pair, 19"EIA and Fixed Depth Mounting Plate

C http://chatsworth.com/industrial-enclosures

RMR Swing Wall-Mount Enclosure

GENERAL ACCESSORIES

RMR Wall-Mount Enclosure Lag Bolt Mounting Kit Lag Bolt Mounting Kit includes (6) M8 x 40 mm Lag Bolts and Sealing Washers for attaching the enclosure to a plywood back board.

Part Number Shipping Weight lb (kg)

37049-001 3 (1.4)

Mounting Plates for RMR Wall-Mount Enclosure Systems Mounting Plates are flat panels that provide a way of attaching a variety of network, automation or control equipment devices into the enclosure for flexible support configurations.

• Fixed Mounting Plates are solid metal panels that are installed in a side-to-side orientation at the rear of the enclosure onto the back of the frame and can be ordered with the enclosure

• Adjustable Mounting Plates are solid metal panels that attach in a side-to-side orientation in the middle section of the enclosure and can be adjusted in depth by one-inch increments and are ordered as accessories

RMR Wall-Mount Enclosure Fixed Depth Mounting Plate

Part Number Enclosure Width in (mm) Enclosure

Height in (mm)

Plate Height in (mm)

Plate Width in (mm)

Shipping Weight lb (kg)

23.6 (600) 27.6 (700)

37075-X01 37075-X31 19.1 (486) 14 (356) * 15 (6.9)

37075-X04 37075-X34 24.4 (619) 20 (508) * 19 (8.7)

37075-X05 37075-X35 26.1 (664) 21 (534) * 20 (9.1)

37075-X07 37075-X37 29.7 (753) 25 (635) * 22 (10.0)

37075-X10 37075-X40 34.9 (886) 30 (762) * 26 (11.8)

37075-X13 37075-X43 40.1 (1019) 35 (889) * 30 (13.7)

37075-X18 37075-X48 48.9 (1241) 44 (1118) * 36 (16.4)

X=Color; C=Black, G=Hammer Gray. *Plate width is 20"W (508 mm) for 23.6"W (600 mm) enclosures and 24"W (610 mm) for 27.6"W (700 mm) enclosures. *Shipping weights are for 27.6"W (700 mm) models.

RMR Quick Wall-Mounting Kit RMR Quick Wall-Mounting Kit features a cleat design that allows for quick and easy mounting of the RMR Wall-Mount Enclosure.

Part Number

Width in (mm)

Shipping Weight lb (kg)

37045-X01 24 (610) 12 (5.5)

37045-X05 28 (712) 13 (5.9)

X=color: C=Black, G=Hammer Gray.

RMR Wall-Mount Enclosure Adjustable Depth Mounting Plate

Part Number Enclosure Width in (mm) Enclosure

Height in (mm)

Plate Height in (mm)

Plate Width in (mm)

Shipping Weight lb (kg)

23.6 (600) 27.6 (700)

37076-X01 37076-X31 19.1 (486) 14 (356) * 15 (6.9)

37076-X04 37076-X34 24.4 (619) 20 (508) * 19 (8.7)

37076-X07 37076-X37 29.7 (753) 25 (635) * 22 (10.0)

37076-X10 37076-X40 34.9 (886) 30 (762) * 26 (11.8)

37076-X13 37076-X43 40.1 (1019) 35 (889) * 30 (13.7)

37076-X18 37076-X48 48.9 (1241) 44 (1118) * 36 (16.4)

X=Color; C=Black, G=Hammer Gray. *Plate width is 20"W (508 mm) for 23.6"W (600 mm) enclosures and 24"W (610 mm) for 27.6"W (700 mm) enclosures. *Shipping weights are for 27.6"W (700 mm) models.

Equipment Mounting Rails Equipment Mounting Rails provide support for 19”EIA (482.6 mm) rack-mount equipment and can be ordered with the enclosure

• Attach to the frame of the enclosure

• Adjustable-depth, supports 19” EIA (482.6 mm) rack-mount equipment

• Universal (vertical) hole pattern, 1U are 1.75"H (44.45 mm)

• 12-24 tapped for screws or multi-mount (square-punched) for cage nuts

• Electrically bonded to the enclosure frame

RMR Wall-Mount Enclosure 19" EIA Multi-Mount (Square-Punched) Rails

Part Number Enclosure Width in (mm) Enclosure

Height in (mm)

Rack Mount

Space (U)

Shipping Weight lb (kg)

23.6 (600) 27.6 (700)

37065-X01 37065-X31 19.1 (486) 9 6 (2.8)

37065-X04 37065-X34 24.4 (619) 12 7 (3.2)

37065-X07 37065-X37 29.7 (753) 15 8 (3.7)

37065-X10 37065-X40 34.9 (886) 18 8 (3.7)

37065-X13 37065-X43 40.1 (1019) 21 9 (4.1)

37065-X18 37065-X48 48.9 (1241) 26 10 (4.6) X= Color; C= Black and G= Hammer Gray. Shipping weight is for 27.6"W (700 mm) models.

RMR Wall-Mount Enclosure 19" EIA 12-24 Tapped Rails

Part Number Enclosure Width in (mm) Enclosure

Height in (mm)

Rack Mount

Space (U)

Shipping Weight lb (kg)

23.6 (600) 27.6 (700)

37067-001 37067-031 19.1 (486) 9 6 (2.8)

37067-004 37067-034 24.4 (619) 12 7 (3.2)

37067-007 37067-037 29.7 (753) 15 8 (3.7)

37067-010 37067-040 34.9 (886) 18 8 (3.7)

37067-013 37067-043 40.1 (1019) 21 9 (4.1)

37067-018 37067-048 48.9 (1241) 26 10 (4.6)

Finish is Brushed Aluminum. Shipping weight is for 27.6"W (700 mm) models.

CABLE MANAGEMENT

RMR Swing Wall-Mount Enclosure Front-To-Back Rear Cable Lashing Bracket Front to Rear Cable Lashing Bracket routes high volumes of cables from front-to-rear of the cabinet, preventing cabling from invading the U space below the cable run.

• Attaches to the frame to provide a dedicated front to rear pathway

• Includes: Trough and installation hardware

• Material: Steel bracket

Part Number

Depth in (mm)

Shipping Weight lb (kg)

37084-X01 20.0 (510) 4 (1.5)

37084-X02 24.0 (610) 4 (1.5)

37084-X03 29.9 (760) 5 (2.3)

X= Color; C= Black and G= Hammer Gray.

RMR Swing Wall-Mount Enclosure

RMR Wall-Mount Enclosure Short Finger Cable Manager Short Finger Cable Manager is a T-shaped cable guide that creates a pathway for cables next to the rail for better organization. Use it with Front-to-Rear Lashing Bracket for optimum performance.

• Attaches to and adjusts with mounting rails

• Passes up to 24 cables per U space through openings on

Short Finger Cable Manager

• Includes: Finger Cable Manager and installation hardware

• Material: Steel panels, plastic guides and latches

RMR Wall-Mount Enclosure Vertical Lashing Bracket Vertical Cable Lashing Bracket creates a simple, separate vertical pathway for a small bundle of cables and has…