S02 - Attachment 6(f) - Mechanical Cut Sheets - 2.0 Ton Split System.pdf

Specifi cations are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

Job Name:

System Reference: Date:

Indoor Unit PKA-A24KA7

Outdoor Unit PUY-A24NHA7

INDOOR UNIT FEATURES

• Sleek, compact design

• Simple installation

• Vane setting for air fl ow direction control

• Auto fan speed mode

• Ideal for spaces such as server rooms, daycare centers, classrooms, churches, small offi ces, and more

• Multiple control options available:

○ kumo cloud® smart device app for remote access

○ Third-party interface options

○ Wired or wireless controllers

OUTDOOR UNIT FEATURES

• Variable speed INVERTER-driven compressor

• Pre-charged with refrigerant volume for piping length up to 70 ft

• Low ambient cooling down to -40°F providing 100% capacity (with wind baffl es)

• 24-hour continuous operation (cooling mode)

• High pressure protection

• Fast restart

• Superior energy and operational effi ciency

• Seacoast protection*

○ External Outer Panel: Phosphate coating + Acrylic-Enamel coating

○ Fan Motor Support: Epoxy resin coating (at edge face)

○ Separator Assembly Valve Bed: Epoxy resin coating (at edge face)

○ Blue Fin treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants.

○ Condenser coil and base panel rated for 2,000 hours in accordance with ASTM B117 testing

*Seacoast protection standard from 2022 production

PKA-A24KA7 & PUY-A24NHA7

24,000 BTU/H WALL-MOUNTED INDOOR UNIT

24,000 BTU/H COOLING ONLY OUTDOOR

Brandon.S.Garbrecht Text Box EHRM Infrastructure Upgrades –San Antonio, TX / VA Project # 671-22-700

Brandon.S.Garbrecht Text Box

2.0 Ton Split System

Specifications are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

SPECIFICATIONS: PKA-A24KA7 & PUY-A24NHA7

test

Cooling at 95°F1

Maximum Capacity BTU/H 24,000 Rated Capacity BTU/H 24,000 Minimum Capacity BTU/H 10,000 Maximum Power Input W 1,960 Rated Power Input W 1,960 Moisture Removal Pints/h 5.0 Sensible Heat Factor 0.77 Power Factor [208V / 230V] % 95.7 / 95.7

Efficiency

SEER 21.4

EER1 12.2

ENERGY STAR® Certified No

Electrical

Voltage, Phase, Frequency 208/230, 1, 60 Guaranteed Voltage Range V AC 198 - 253 Voltage: Indoor - Outdoor, S1-S2 V AC 208/230 Voltage: Indoor - Outdoor, S2-S3 V DC 24 Short-circuit Current Rating [SCCR] kA 5 Recommended Fuse/Breaker Size (Oudoor) A 25 Recommended Wire Size [Indoor - Outdoor] AWG 14 Power Supply Indoor unit is powered by the outdoor unit

Indoor Unit

MCA A 1.0

Fan Motor Full Load Amperage A 0.36 Fan Motor Type DC Motor Airflow Rate at Cooling, Dry CFM 635–705–775 Airflow Rate at Cooling, Wet CFM 570–635–700 Airflow Rate at Heating, Dry CFM 635–705–775 Sound Pressure Level [Cooling] dB[A] 39–42–45 Sound Pressure Level [Heating] dB[A] 39–42–45 Drain Pipe Size In. [mm] 5/8 [16] Coating on Heat Exchanger — External Finish Color White Munsell 1.0Y 9.2/0.2 Unit Dimensions W x D x H: In. [mm] 46-1/16 x 11-5/8 x 14-3/8 [1,170 x 295 x 365] Package Dimensions W x D x H: In. [mm] 51 x 14-1/4 x 18-1/2 [1,295 x 362 x 470] Unit Weight Lbs. [kg] 46 [21] Package Weight Lbs. [kg] 53 [24]

Indoor Unit Operating Temperature Range Cooling Intake Air Temp [Maximum / Minimum]* °F 90 DB, 72 WB / 66 DB, 61 WB

Outdoor Unit

MCA A 19.0

MOCP A 26

Fan Motor Full Load Amperage A 0.4 Fan Motor Output W 86 Airflow Rate [Cooling / Heating] CFM 1940 Refrigerant Control LEV Defrost Method Reverse Cycle Coating on Heat Exchanger Blue Fin Coating*** Sound Pressure Level, Cooling1 dB(A) 47 Compressor Type INVERTER-driven twin rotary Compressor Model SNB172FWHM1 Compressor Rated Load Amps A 7 Compressor Locked Rotor Amps A 11.0 Compressor Oil [Type // Charge] oz. FV50S // 23 External Finish Color Ivory Munsell 3Y 7.8/1.1 Base Pan Heater N/A Unit Dimensions W x D x H: In. [mm] 37-13/32 x 13 (+1-3/16) x 37-1/8 [950 x 330 (+30) x 943] Package Dimensions W x D x H: In. [mm] 40-15/16 x 17-11/16 x 40-11/16 [1040 x 450 x 1033] Unit Weight Lbs. [kg] 151 [68] Package Weight Lbs. [kg] 176 [80]

Outdoor Unit Operating Temperature Range Cooling Air Temp [Maximum / Minimum]* °F 115 DB / -40 DB

Refrigerant

Type R410A Maximum Charge Quantity Lbs, oz 7.0, 11.0 Initial Charge Quantity Ft. [m] 70.0 [20.0] Additional Refrigerant Charge Per Additional Piping Length oz./Ft. [g/m] 0.3 [22.5]

NOTES:

AHRI Rated Conditions (Rated data is determined at a fixed compressor speed) 1Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB

*Indoor/Outdoor Unit Operating Temperature Range (Cooling Air Temp [Maximum / Minimum]):

• Wind baffles required to operate below 23°F DB in cooling mode.

• Cooling-only system with advanced wind baffle: -40°F - 115°F.

• Refer to wind baffle documentation for further information.

**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re-start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):

• System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

***Blue Fin Coating Standard from 2022 production:

• PU(Y/Z)-A(12/18)NKA7 - Beginning with serial number 12U*****

• PU(Y/Z)-A(24/30/36/42)NKA7 - Beginning with serial number 1ZU*****

SPECIFICATIONS: PKA-A24KA7 & PUY-A24NHA7

test

Piping

Gas Pipe Size O.D. [Flared] In.[mm] 5/8 [15.88] Liquid Pipe Size O.D. [Flared] In.[mm] 3/8 [9.52] Maximum Piping Length Ft. [m] 225 [68] Maximum Height Difference Ft. [m] 100 [30] Maximum Number of Bends 15

NOTES:

AHRI Rated Conditions (Rated data is determined at a fixed compressor speed) 1Cooling (Indoor // Outdoor) °F 80 DB, 67 WB // 95 DB, 75 WB

*Indoor/Outdoor Unit Operating Temperature Range (Cooling Air Temp [Maximum / Minimum]):

• Wind baffles required to operate below 23°F DB in cooling mode.

• Cooling-only system with advanced wind baffle: -40°F - 115°F.

• Refer to wind baffle documentation for further information.

**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re-start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):

• System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

***Blue Fin Coating Standard from 2022 production:

• PU(Y/Z)-A(12/18)NKA7 - Beginning with serial number 12U*****

• PU(Y/Z)-A(24/30/36/42)NKA7 - Beginning with serial number 1ZU*****

Specifications are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

Specifications are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

INDOOR UNIT ACCESSORIES: PKA-A24KA7

Control Interface

3-Pin Connector PAC-715AD BACnet® and Modbus® Interface PAC-UKPRC001-CN-1 IT Extender PAC-WHS01IE-E kumo station® for kumo cloud® PAC-WHS01HC-E Thermostat Interface PAC-US445CN-1 USNAP Adapter PAC-WHS01UP-E Wireless Interface for kumo cloud® PAC-USWHS002-WF-2

Remote Sensor

Flush Mount Remote Temperature Sensor PAC-USSEN002-FM-1 Flush Mount Temperature Sensor PAC-USSEN001-FM-1 Remote Temperature Sensor PAC-SE41TS-E Wireless temperature and humitity sensor for kumo cloud® PAC-USWHS003-TH-1

Wired Remote Controller

Deluxe Wired MA Remote Controller† PAR-40MAAU Simple MA Remote Controller† PAC-YT53CRAU-J Touch MA Controller† PAR-CT01MAU-SB

Wireless Remote Controller kumo touch™ RedLINK™ Wireless Controller MHK2 Lockdown bracket for remote controller RCMKP1CB Wireless MA Receiver PAR-FA32MA-W Wireless MA Remote Controller PAR-FL32MA-E

Condensate

Blue Diamond (Advanced) Mini Condensate Pump w/ Reservoir & Sensor (208/230V) [recommended] X87-721 Blue Diamond (MegaBlue Advanced) Condensate Pump w/ Reservoir & Sensor X87-835 Drain Pan Level Sensor/Control SS610E Refco Condensate Pump (100-240 VAC) GOBI-II Refco Condensate Pump (100-240 VAC) up to 120,000 BTU/H COMBI

Disconnect Switch (30A/600V/UL) [fits 2” X 4” utility box] - Black TAZ-MS303

Lineset

10’ x 3/8” x 10’ x 5/8” Lineset (Twin-Tube Insulation) MPLS385812T-10 100’ x 3/8” x 100’ x 5/8” Lineset (Twin-Tube Insulation) MPLS385812T-100 15’ x 3/8” x 15’ x 5/8” Lineset (Twin-Tube Insulation) MPLS385812T-15 30’ x 3/8” x 30’ x 5/8” Lineset (Twin-Tube Insulation) MPLS385812T-30 50’ x 3/8” x 50’ x 5/8” Lineset (Twin-Tube Insulation) MPLS385812T-50 65’ x 3/8” x 65’ x 5/8” Lineset (Twin-Tube Insulation) MPLS385812T-65

Specifications are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

OUTDOOR UNIT ACCESSORIES: PUY-A24NHA7

Air Outlet Guide Air Outlet Guide (1 Piece) PAC-SG59SG-E

Centralized Drain Pan Centralized Drain Pan PAC-SG63DP-E Drain Pan PAC-SG64DP-E

Control/Service Tool

Control/Service Tool PAC-SK52ST M- & P-Series Maintenance Tool Cable Set M21EC0397 Maintenance Tool Interface PAC-USCMS-MN-1 USB/UART Conversion Cable (Required for all laptop connection) M21EC1397

Hail Guards Hail Guard HG-A6

M-NET Converter M-NET Converter PAC-SJ85MA-E M-NET Converter PAC-SJ95MA-E

Mini-Split Wire

14 Gauge, 4 wire MiniSplit Cable—250 ft. roll S144-250 14 Gauge, 4 wire MiniSplit Cable—50 ft. roll S144-50 16 Gauge, 4 wire MiniSplit Cable—250 ft. roll S164-250 16 Gauge, 4 wire MiniSplit Cable—50 ft. roll S164-50

Mounting Pad Condensing Unit Mounting Pad: 24” x 42” x 3” ULTRILITE2

Stand

18” Single Fan Stand QSMS1801M 24” Single Fan Stand QSMS2401M Condenser Wall Bracket QSWB2000M-1 Condenser Wall Bracket - Stainless Steel Finish QSWBSS Outdoor Unit Stand — 12” High QSMS1201M

Wind Baffle

Front Wind Baffle WB-PA5 Rear Wind Baffle WB-RE5 Side Advanced Wind Baffle WB-SD5

Specifications are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

Front side

46-1/16(1170) 9-1/2(241)33-21/32(855)2-29/32(74)

-3

/8 (3

Emergency operation switch (cooling/heating)

Terminal block for Outdoor unit

Terminal block for MA-remote controller

Front side(Grille open)

Terminal block for power supply (option)

Filter hook

6-1/16(154) 4-27/32(123)

18-31/32(482)Liquid pipe

17-15/32(444)Gas pipeDrain hose

5-9/32(134)

M in

.9 /3

2( 7)

Center measurement hole [ 3/32([ 2.5)

Knockout hole for rear piping

75-[ 3/16([ 5.1) Tapping screw hole

Mount board

Wall hole for right rear piping

Indoor unit outline

4-[ 11/32([ 9) Bolt hole

1/ 8(

3)

R1-15/32(R37.5)

2- 1/

8(

5/8(15.5)

-9

/3 2(

9)

0 17 -9

/3 2(

9)

-1

/8 (3

/3

2(

-3

/8 (5

.4

-7

/8 (4

-3

/3 2(

8.

5)

-1 /8

(3

-1 1/

(3

-3

/8 (3

4-

/3 2(

0)

2- 3/

8(

/3 2(

-5

/1 6(

5.

5)

-7 /8

(4

-3

/3 2(

8.

5)

-1 /8

(3

.5

-1

1/

(3

-3

/8 (3

4-

/3 2(

0)

2- 3/

8(

1-1/4(32)

12-5/32(308.5)

31/32(25)

11-1/2(292) 11(279.5)

9-17/32(242) 7-9/16(192)

5-19/32(142) 4-29/32(125) 4-19/32(117) 3-15/16(100) 2-15/16(75) 1-31/32(50)

-1

/8 (3

)0

-3

/4 (3

.2

-1

5/

(4

.5

1/2(12.5)

11-1/2(292) 10-13/32(264) 9-1/32(229.5) 8-17/32(217) 6-9/16(167) 5-3/32(129.5) 4-1/8(104.5) 3-7/16(87.5) 2-15/32(62.5) 1-15/32(37.5) 1/2(12.5)

2-1/8(54)

31/32(25)

12-1/4(311)

8-

/3 2(

6.

5)

-1

1/

(3

-7

/8 (5

.5

7- 7/

(1

-1

1/

(3

-1

1/

(4

.2

-1

/3 2(

5)

-1

/3 2(

5)

A

5/

(7 .8

3-

1/

(7 7)

2- 5/

8(

2-9/16(65)

B

Knockout hole for piping

13/32(10.7)

2- 9/

(6

5)

3-1/32(77) 3-7/16(87)

C

5/

(7 .8

2-9/16(65)

3- 1/

(7

7) 2-

5/ 8(

Louver(manual)Vane(auto)

Knockout hole for lower piping

Under side

BB

Receiver DEFROST/STAND BY lamp

Operation lamp

2-19/32(66)

/3

2(

1-

1/ 4(

2- 3/

(5

3)

1-3/16(30) 1-3/8(35)

Mount board

C

Knockout hole for right piping

Right side

11-5/8(295) 3/16(5)

Left side

A

Knockout hole for left piping

Top side

2- 9/

(6

5.

2)

5-

/3 2(

0.

3)

7/

(1 1)

17(431.7)16-11/16(423.7)

Air outlet

Air inlet

M in

.1 -7

/8 (4

8)

M in.

9-

/3 2(

0)

Required space(Indoor unit)

Min.3-31/32(100.5)Min.8-21/32(220)

Min.2-1/16(52.3)

3 2

Refrigerant pipe: 3/8 O.D([ 9.52)

Refrigerant pipe: 5/8 O.D([ 15.88)

5/8([ 16) O.D3 Drain hose

Piping connection

1 Liquid pipe

2 Gas pipeThrough hole

[ 2-15/16 ([ 75)

[ 2-15/16~[ 3-5/32 ([ 75~[ 80)

Sleeve (purchased locally) Flared connection: 5/8F

Flared connection: 3/8F

Effective length: 23-1/32 (585)

Unit: inch (mm)

INDOOR UNIT DIMENSIONS: PKA-A24KA7

FORM# PKA-A24KA7 & PUY-A24NHA7 - 202302

1340 Satellite Boulevard Suwanee, GA 30024 Toll Free: 800-433-4822 www.mehvac.com

Specifications are subject to change without notice. © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved.

Drain hole (5- ø33<1-5/16>)

Bottom piping hole (knockout)

<5-23/32>

<5-23/32>

<5-23/32>

<8-21/32>30 <1-3/16>

<3

-3 /1

6>

<8

-5 /8

71<2-13/16> 71 <2

-1 3/

Rear piping cover Front piping cover

2-12×36 oval holes (Foundation Bolt M10<W3/8>)

Air Discharge

Rear Air Intake

Side Air Intake

2-U Shaped notched holes (Foundfation Bolt M10<W3/8>)

Installation Feet

0<

175<6-7/8>

57<2-1/4> 41 <1-5/8>

<1 -1

/3 2>

<1

-3 /3

2>

0<

-9 /1

6>

<3

/4

<3

1/

70 <2-3/4>

175 <6-7/8> 600<23-5/8>

40<19/32>

53<2-3/32>

61<2-13/32>

Side Air Intake

Handle for moving

Air Intake

Rear Air Intake

Handle for moving

Min.100mm <3-15/16>

Min. 500mm <19-11/16>

Handle for moving

Handle for moving

Service panel Earth terminal

Left ... Power supply wiring Reight ... Indoor/Outdoor wiring

Terminal Connections

9<

-1

1/

950<37-13/32> 322<12-11/16>

<3 7-

1/ 8>

<1 8-

5/ 8>

<2

9/

*1

<1

7- 5/

8> *1

<1 6-

/3

2>

Min. 10mm <3/8>

Min. 10mm <3/8>

FR

EE

When installing the conduit, Set the attachment to the inner side of each panel.

1/2 Conduit attachment

2-ø22.2<7/8>

<1

-7 /3

2>

74<2-19/32>

40<1-9/16>

1 ... Refrigerant GAS pipe connection (FLARE) ø15.88(5/8F)

... Refrigerant LIQUID pipe connection (FLARE) ø 9.52(3/8F) *1... Indication of STOP VALVE connection location.

Example of Notes

Power supply wiring hole (2- ø27<1-1/16>knockout) Rear trunking hole (knockout)

Rear piping hole (knockout)

<2

-1 /2

<2 -7

/1 8>

<2

9/

<2

-3 /1

6>

<1 -1

/1 6> 92<3-5/18>

65 <2-9/16>

45<1-25/32> 40<1-9/16> ø92 <3-5/8>

Power supply wiring hole (2-ø27knockout)

Front trunking hole (knockout)

Front piping hole (knockout)

45<1-25/32>

65<2-9/16> 92<3-5/8>

40<1-9/16>

<2

-1 /2

<2

9/

<2 -7

/8

<2

-3 /1

6>

<1 -1

/1 6>

92<3-5/8>

Right piping hole (knockout)

Right trunking hole (knockout)

Power supply wiring hole (2- ø27knockout)

19<3/4> 55 <2-3/16>

<2

9/

<1 -1

/1 6>

<3

-5 /8

92 <3-5/8>

40<1-9/16>75 <2-31/32>

<2

-7 /1

8>

<2 -1

/2

92<3-5/8>

Piping knockout Hole Details

Ma x.

<Foundation bolt height>

<1

-3 /1

6>

Min.

Mi n.

Service space

10 <13> Min.

500 <19-11/16>

<1

9-

/1 6>

<3 -1

5/

M in

Dimensions of space needed for service access are shown in the below diagram.

Please secure the unit firmly with 4 foundation (M10<W3/8>) bolts.

(Bolts and washers must be purchased locally.)

Piping and wiring connections can be made from 4 directions:

FRONT,Right,Rear and Below.

4 PIPING-WIRING DIRECTIONS3 FOUNDATION BOLTS2 SERVICE SPACE1 FREE SPACE (Around the unit)

The diagram below shows a basic example.

Explantion of particular details are given in the installation manuals etc.

ø ø

FOUNDATION

OUTDOOR UNIT DIMENSIONS: PUY-A24NHA7