Amendment 0005 PS-77-001.0_SD2_PNY B77 POD_Shop Drawing Submittal.pdf
PDF 120 KB Posted
- Solicitation number
- N4008525R3500
About this file
This document is a technical specification sheet for a Metalclad Switchgear Series 5 electrical equipment product designed for the Philadelphia Navy Yard B77 POD #2 project. The switchgear has a rated maximum voltage of 15.0 kV, an impulse withstand rating of 95 kV BIL, and a continuous current rating of 2000 amperes. It features a 3-phase, 3-wire, 60 Hz power system configuration with silver-plated copper bus bars braced for 50kA RMS symmetrical short circuit current.
Key technical specifications include vacuum breakers with 15.0 kV/25kA rating, control wiring using #14 AWG SIS type wire, and options such as traceability labels, shorting terminal blocks, strip heaters, and certified test reports. The equipment is manufactured by Philadelphia Electrical Equipment Co. with a total lineup weight of 13,000 lbs, divided into two shipping splits. The project number is 224143, and the specific model is PG-B77-2 with serial number 224143-2000, designed for indoor Type 1 construction with ANSI #61 finish and zinc phosphate treatment.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
electrical equipment co.
Philadelphia
KLJGFDSKJH
KLJGFDSKJH
FDDFD
CONSULTANTS
POWER SYSTEMS EQUIPMENT
CUTOM SWITCHGEAR
POST OFFICE BOX 1480
WEST CHESTER, PA USA 19380
TEL: 484-840-0860 FAX: 484-840-0863
PEECOENERGY.COM
MODEL SERIAL
PHILADELPHIA NAVY YARD B77 POD #2
PG-B77-2 224143-2000
GENERAL NOTES:
POWER SYSTEM DATA:
13200V 3Ph 3W 60Hz, 3 Phase Wye, 3 Wire, Solidly Grounded 95 kV BIL, 60 HERTZ FREQUENCY
BUS SYSTEM DATA:
2000 AMPERES, SILVER PLATED COPPER, EPOXY INSULATED
MAIN BUS BRACED FOR 50KA RMS SYMMETRICAL.
GLASS POLYESTER STAND-OFF INSULATORS
GLASS POLYESTER BETWEEN SECTION BUS BARRIER
BREAKER BUSHINGS IN CELL ARE POLYESTER
BARE COPPER GROUND BUS
ENCLOSURE DATA:
TYPE 1 INDOOR CONSTRUCTION
ALTITUDE ABOVE SEA LEVEL BETWEEN: 0 - 3299 ft / 0 - 1005 m
ANSI #61 FINISH, PROCEDURES: ZINC PHOSPHATE WITH NON-CHROMIC SEAL,
RUST INHIBITED TREATMENT WITH BAKED POLYESTER COATING.
REAR ACCESS BY BOLTED PANELS
WHITE INTERIOR LOW VOLTAGE PANELS
HANDLING:
SWITCHGEAR SHIPPING SECTIONS ARE FURNISHED WITH FOUR LIFTING
LUGS. A CRANE SHALL BE USED WITH A SLING AND A SPREADER BAR.
SWITCHGEAR WEIGHT WITH BREAKERS INSTALLED:
SHIPPING SPLIT Shipping Split - 1, 6490.00 LBS/2943.86 KG SHIPPING SPLIT Shipping Split - 2, 6510.00 LBS/2952.94 KG
LINEUP WEIGHT 13000.00 LBS/5896.80 KG
BREAKER WEIGHT:
1200A, 380 LBS 173KG
CODE STANDARDS:
ANSI, NEMA, UL Recognized
UR LABEL IS REQUIRED
PRODUCT INFORMATION:
WIRING:
CONTROL WIRING IS # 14 AWG, TYPE SIS
CURRENT CIRCUIT WIRING IS # 12 AWG, TYPE SIS
WIRES SHALL BE LABELED WITH DESTINATION MARKING (DESTINATION-ORIGIN)
TERMINATIONS:
INSULATED RING TYPE LUGS SHALL BE USED (WHERE APPLICABLE) ON ALL LOW VOLTAGE SCREW/STUD TERMINALS.
TERMINAL BLOCKS ARE COMPRESSION SOLDERLESS BOX LUGS (TYPE GR6).
COMPRESSION BOX LUGS (TYPE GR6) TERMINAL BLOCKS FOR ALL COMMUNICATIONS TERMINATIONS
WHEN REQUIRED.
BREAKER SPECIFICATION:
BREAKER TYPE IS SERIES 5 - VACUUM
BREAKER RATING: 15.0kV/25kA ANSI C37.09 (STD BKR)
CLOSE CONTROL POWER IS 125VDC FROM BATTERY SYSTEM
TRIP CONTROL POWER IS 125VDC FROM BATTERY SYSTEM
MOC 5a/5b
OPTIONS/ACCESSORIES:
TRACEABILITY LABEL REQUIRED
SHORTING TERMINAL BLOCKS FOR ALL CT CIRCUITS
STRIP HEATERS WITH THERMOSTAT
BREAKER LIFT TRUCK
CERTIFIED TEST REPORTS
ELECTRIC RACKING
SPECIAL FEATURES:
Special Dpl Pole Bkr in lieu of fuses #: 171027 Special Hastings GB Studs #: 170676
TOC 5a/5b
FACTORY ORDER NO.
RATED MAXIMUM VOLTAGE
IMPULSE WITHSTAND (BIL)
FREQUENCY
CONTINUOUS CURRENT
MAX SHORT CIRCUIT CUR.
kV kV
HZ
A kA SYM
SMYRNA, TN USA
46006-801-01
METALCLAD SWITCHGEAR
SERIES 5
15.0
1098765432
R
EV
B Y
D
AT
E
R
EV
N O
H
G
F
E
D
C
B
A
DRAWING NUMBER:
DRAWING TITLE:
AUTHOR: AJL
DRAWING NOTES:
1.)
B77 POD SWITCHGEAR
NAMEPLATES & INFO
A-2004
PROJECT:
CLIENT:
PROJECT NUMBER:
DATE: JAN. 03, 2025
SUBMITTAL RELEASE
NOT FOR CONSTRUCTION
AJ
L
/0
3/
PAID
224143
PHILADELPHIA NAVY YARD
B77 POD SWITCHGEAR
PROJECT #2
Equipment Company and is to be returned upon request.
purpose detrimental to the interest of Philadelphia Electrical to be used for furnishing information to others or for any other Equipment Company and is loaned upon the condition that it is not This drawing/information is the property of Philadelphia Electrical
USA
(1254) 840-0863 - Fax
(1254) 840-0860 - Phone West Chester, PA 19380
PO Box 11250
Equipment Company Philadelphia Electrical
PASS AND STOW
PHILADA
MCMLXXXI
PEECO
File details come from the government source that posted it. Updated .