CDRL_A059.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved

OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

TM: _____ TDP: ____ Other: ___X__

D. SYSTEM/ITEM

AMPHIBIOUS COMBAT VEHICLE (ACV)

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

TBD

1. DATA ITEM NO.

A059

2. TITLE OF DATA ITEM

CONCEPTUAL DESIGN DRAWINGS/MODELS

3. SUBTITLE

VULNERABILITY MODELING MUVES-S2 MODEL

4. AUTHORITY (Data Acquisition Document No.)

DI-SESS-81001D

5. CONTRACT REFERENCE

SOW PARA 3.3.21.1

6. REQUIRING OFFICE

PROGRAM MANAGER

ADVANCED AMPHIBIOUS

ASSAULT (PM AAA)

7. DD 250 REQ

LT

9.

DIST STATEMENT

REQUIRED

SEE BLOCK 16

10. FREQUENCY

TWO (2) TIMES

12. DATE OF FIRST

SUBMISSION

90 DAC

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLOCK 16

Draft

Final

Reg Repro

16. REMARKS

BLOCK 4: ASSOCIATED INPUT INFORMATION TO SUPPORT THE UNDERSTANDING OF THE

MODEL IS ALSO REQUIRED.

BLOCK 8: INITIAL SUBMISSION, PRELIMINARY DESIGN REVIEW (PDR)/CRITICAL DESIGN

REVIEW (CDR): THE GOVERNMENT WILL HAVE 67 CALENDAR DAYS TO REVIEW AND

PROVIDE COMMENTS ON THE PDR/CDR ARTIFACT. ACCEPTANCE IS BASED ON TECHNICAL

CONTENT. THE CONTRACTOR SHALL HAVE 15 CALENDAR DAYS TO UPDATE THE

TECHNICAL CONTENT DEFICIENCIES AND RESUBMIT FOR REVIEW. THE GOVERNMENT WILL

HAVE 15 CALENDAR DAYS TO ACCEPT THE SUBMISSION.

2ND SUBMISSION, SYSTEM VERIFICATION REVIEW (SVR): THE GOVERNMENT WILL HAVE 45

CALENDAR DAYS TO REVIEW AND PROVIDE COMMENTS ON THE SVR ARTIFACT.

ACCEPTANCE IS BASED ON TECHNICAL CONTENT. THE CONTRACTOR SHALL HAVE 15

CALENDAR DAYS TO UPDATE THE TECHNICAL CONTENT DEFICIENCIES AND RESUBMIT FOR

REVIEW. THE GOVERNMENT WILL HAVE 15 CALENDAR DAYS TO ACCEPT THE SUBMISSION.

BLOCK 9: DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE (DoD) AND UNITED STATES (U.S.) DoD CONTRACTORS ONLY;

ADMINISTRATIVE/OPERATIONAL USE, 19 APR 2012. OTHER REQUESTS SHALL BE REFERRED

TO PROGRAM EXECUTIVE OFFICER – LAND SYSTEMS (PM AAA), 2200 LESTER STREET,

QUANTICO, VA 22135-6050.

BLOCK 13: 2ND SUBMISSION (SVR): 60 CALENDAR DAYS FOLLOWING COMPLETION OF THE

LAST SYSTEM VERIFICATION TEST IDENTIFIED IN THE GOVERNMENT INTEGRATED MASTER

SCHEDULE AND COMMUNICATED TO THE CONTRACTOR AT THE PROGRAM MANAGEMENT

REVIEWS.

BLOCK 14: ELECTRONIC SUBMISSION REQUIRED. THE CONTRACTOR SHALL PROVIDE AN

ELECTRONIC COPY TO THE CONTRACTING OFFICER’S REPRESENTATIVE (COR) AND

ATLERNATE COR.

SEE BLOCK 16

15. TOTAL

G. PREPARED BY

Fitch CIV Dennis

H. DATE

I. APPROVED BY

Was CIV Joseph E

J. DATE

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 1

TDP OPTION SELECTION WORKSHEET

SYSTEM: DATE PREPARED:

A. CONTRACT NO.

B. EXHIBIT/ATTACHMENT

NO.

C. CLIN

D. CDRL DATA ITEM NO.

1. TDP Level (X and complete as applicable.)

A. CONCEPTUAL LEVEL

DEVELOPMENTAL LEVEL

PRODUCTION LEVEL

B. REMARKS:

2. TYPE AND FORMAT (X all that apply and complete as applicable)

A.

TYPE 2D: 2D DRAWINGS

TYPE 3D: 3D MODEL ONLY

TYPE 3D: 3D MODELS WITH

ASSOCIATED 2D DRAWINGS

B.

NATIVE CAD (SPECIFY TYPE) _______ ______________________

ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.)

ISO32000 PORTABLE DOCUMENT FORMAT: _______

OTHER ELECTRONIC FORMAT (SPECIFY TYPE)

HARDCOPY:

REMARKS: ________________________________________________________

3. CAGE Code AND DOCUMENT

NUMBERS

A. CONTRACTOR CAGE AND DOCUMENT NUMBERS

GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D)

D. To Be Assigned By:

B. USE CAGE CODE: C. USE DOCUMENT NUMBERS:

4. DRAWING FORMATS (X one and complete as applicable)

CONTRACTOR FORMAT.

GOVERNMENT FORMAT.

REMARKS: _________________________________________________________________________________________

5. TDP ELEMENTS REQUIRED (X all that apply)

ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR-OR THE FOLLOWING ARE REQUIRED:

CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

PRODUCT DRAWINGS/MODELS AND ASSOCIATED LIST

COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LIST

QUALITY ASSURANCE PROVISIONS

SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIFICATIONS

SOFTWARE DOCUMENTATION

SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LIST

6. ASSOCIATED LISTS (X and complete as applicable)

A. PARTS LIST (X ONE) (1) INTEGRAL (2) SEPARATE

B. DATA LIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

C. INDEX LIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

D. WIRINGLIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

E. INDENTURE DATA LIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

F. APPLICATION LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

ASME Y14.100

ENGINEERING DRAWING

PRACTICES WITH

APPENDICES

B C D E

ASME Y14.24 TYPES AND APPLICATIONS OF

ENGINEERING DRAWINGS

ASME Y14.34 ASSOCIATED LIST

ASME Y14.35 REVISION OF ENGINEERING DRAWINGS

AND ASSOCIATED LIST

ASME Y14.41 DIGITAL PRODUCT DATA PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCES

OTHER STANDARDS APPLY AS

DESCRIBED:

COMPANY STANDARDS

PERMITTED: YES NO

8. OTHER TAILORING