The file's text, extracted by GovTribe without its formatting.
TM Content
-10
MIL-STD-40051-2B
Reference
Element Name
| FRONT MATTER |
| R |
| 5.2.1 |
| <paper.frnt> |
| Front cover |
| R |
| 5.2.1.1 |
| <frntcover> |
| (MC) Promulgation letter |
| R |
| 5.2.1.3 |
| <promulgation> |
| Warning summary |
| R |
| 5.2.1.4 |
| <warnsum> |
| Change transmittal page |
| R |
| 5.2.1.5 |
| <chgsheet> |
| List of effective pages/work packages |
| R |
| 5.2.1.6 |
| <loepwp> |
| Title page |
| R |
| 5.2.1.7 |
| <titleblk> |
| Table of contents |
| R |
| 5.2.1.9 |
| <contents> |
| How to use this manual |
| R |
| 5.2.1.10 |
| <howtouse> |
CHAPTER 1.
GENERAL INFORMATION, EQUIPMENT DESCRIPTION, AND THEORY OF OPERATION
| GENERAL INFORMATION WORK PACKAGE |
| R |
| B.5.2 |
| <ginfowp> |
| Maintenance forms, records, and reports |
| R |
| B.5.2.4 |
| <mfrr> |
Reporting Equipment Improvement Recommendations (EIR)
| Hand Receipt (HR) manuals |
| N/A |
| B.5.2.6 |
| <handreceipt> |
Corrosion Prevention and Control
(CPC) (MC)
Ozone Depleting Substances
(ODS)
| Destruction of Army materiel to prevent enemy use |
| R |
| B.5.2.9 |
| <destructmat> |
| Preparation for storage or shipment |
| R |
| B.5.2.10 |
| <pssref> |
| Warranty information |
| N/A |
| B.5.2.11 |
| <wrntyref> |
| Nomenclature cross-reference list |
| R |
| B.5.2.12 |
| <nomenreflist> |
| List of abbreviations/acronyms |
| R |
| B.5.2.13 |
| <loa> |
| Quality of material |
| P |
| B.5.2.15 |
| <qual.mat.info> |
Safety, care, and handling
| Nuclear hardness |
| N/A |
| B.5.2.17 |
| <hcp> |
Calibration
| Item unique identification (IUID) |
| N/A |
| B.5.2.19 |
| <iuid> |
TABLE A-II. Operators and combined operator/maintenance requirements matrix for
MIL-STD-40051-2B
A –IV-1
USMC MODIFYED
Source: https://assist.dla.mil -- Downloaded: 2015-01-15T17:57Z Check the source to verify that this is the current version before use.
MIL-STD-40051-2B
Reference
Element Name
| Supporting information for repair parts, special tools, TMDE, and support equipment |
| P |
| B.5.2.26 |
| <supdata> |
Copyright credit line
| EQUIPMENT DESCRIPTION AND DATA WORK PACKAGE |
| R |
| B.5.3 |
| <descwp> |
| Equipment characteristics, capabilities, and features |
| R |
| B.5.3.3 |
| <eqpinfo> |
| Location and description of major components |
| R |
| B.5.3.4 |
| <locdesc> |
Differences between models
| Equipment data |
| R |
| B.5.3.6 |
| <eqpdata> |
| THEORY OF OPERATION WORK PACKAGE |
| R |
| B.5.4 |
| <thrywp> |
CHAPTER X.
OPERATOR INSTRUCTIONS
| DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS WORK PACKAGE |
| R |
| C.5.2.2.1 |
| <ctrlindwp> |
| OPERATION UNDER USUAL CONDITIONS WORK PACKAGE |
| R |
| C.5.2.2.2 |
| <opusualwp> |
| Operation under usual conditions task |
| R |
| C.5.2.2.2.3 |
| <opertsk> |
Security measures for electronic data
| Siting requirements |
| N/A |
| C.5.2.2.2.5 |
| <site> |
| Shelter requirements |
| N/A |
| C.5.2.2.2.6 |
| <shelter> |
Assembly and preparation for use
Initial adjustments, before use and self-test
| Operating procedures |
| R |
| C.5.2.2.2.9 |
| <oper> |
Operating auxiliary equipment
Preparation for movement
Decals and instruction plates
| C.5.2.2.2.13 |
| <instructplt> |
| OPERATION UNDER UNUSUAL CONDITIONS WORK PACKAGE |
| R |
| C.5.2.2.3 |
| <opunuwp> |
Security measures for electronic data
| Unusual environment/weather |
| R |
| C.5.2.2.3.5 |
| <unusualenv> |
Fording and swimming
MIL-STD-40051-2B
Reference
Element Name
Interim Chemical, Biological, Radiological, and Nuclear (CBRN) decontamination procedures
| Jamming and Electronic Countermeasures (ECM) procedures |
| N/A |
| C.5.2.2.3.8 |
| <ecm> |
Degraded operation procedures
Decals and instruction plates
| C.5.2.2.3.10 |
| <instructplt> |
EMERGENCY WORK PACKAGE
STOWAGE AND DECAL/DATA PLATE GUIDE WORK PACKAGE
ON-VEHICLE EQUIPMENT LOADING PLAN WORK PACKAGE
CHAPTER X. TROUBLESHOOTING MASTER INDEX
APPENDIX D
D.5.4.4 <tim> <masterindexcategory>
TROUBLESHOOTING INDEX WORK PACKAGE
CHAPTER X. TROUBLESHOOTING PROCEDURES
NOTE
The notation (*) indicates that at least one of the these content items shall be included
APPENDIX D
D.5.4.2 <tim> <troublecategory>
INTRODUCTION WORK PACKAGE
TROUBLESHOOTING INDEX WORK PACKAGE
*OPERATIONAL CHECKOUT WORK PACKAGES
*TROUBLESHOOTING WORK PACKAGES
*COMBINED OPERATIONAL CHECKOUT AND TROUBLESHOOTING WORK PACKAGES
MIL-STD-40051-2B
Reference
Element Name
CHAPTER X. PMCS
MAINTENANCE INSTRUCTIONS
NOTE
PMCS may be in its own chapter or may be combned with other maintenance work packages in a maintenance chapter but not both places.
APPENDIX E
E.5.2.1 <mim> <pmcscategory>
| PMCS INTRODUCTION WORK PACKAGE |
| R |
| E.5.3.4.1 |
| <pmcsintrowp> |
| PMCS, INCLUDING LUBRICATION INSTRUCTIONS, WORK PACKAGE |
| R |
| E.5.3.4.2 |
| <pmcswp> |
CHAPTER X.
MAINTENANCE INSTRUCTIONS
NOTE
PMCS is required as a minimum in one maintenance chapter. PMCS may be in its own chapter or may be combned with other maintenance work packages in a maintenance chapter but not both places.
E.5.2.2 E.5.2.3 <mim> <maintenancepmcscateg ory> <maintenancecategory>
| SERVICE UPON RECEIPT WORK PACKAGE (MAINTAINER LEVEL ONLY) |
| P |
| E.5.3.2 |
| <surwp> |
| Service upon receipt tasks |
| P |
| E.5.3.2.3 |
| <surtsk> |
| Siting |
| P |
| E.5.3.2.3.1 |
| <siting> |
| Shelter requirements |
| P |
| E.5.3.2.3.2 |
| <shltr> |
| Service upon receipt of materiel |
| P |
| E.5.3.2.3.3 |
| <surmat> |
| Installation instructions |
| P |
| E.5.3.2.3.4 |
| <install> |
| Preliminary servicing of equipment |
| P |
| E.5.3.2.3.5 |
| <preserv> |
| Preliminary checks and adjustment of equipment |
| P |
| E.5.3.2.3.6 |
| <prechkadj> |
| Preliminary calibration of equipment |
| P |
| E.5.3.2.3.7 |
| <precal> |
| Circuit alignment |
| P |
| E.5.3.2.3.8 |
| <calign> |
| Ammunition markings |
| P |
| E.5.3.2.3.9.1 |
| <mark> |
| Classification of defects |
| P |
| E.5.3.2.3.9.2 |
| <ammo.defect> |
| Ammunition handling |
| P |
| E.5.3.2.3.9.3 |
| <ammo.handling> |
| Procedures to activate ammunition |
| P |
| E.5.3.2.3.9.4 |
| <arm> |
| Additional maintenance task |
| P |
| E.5.3.2.3.10 |
| <other.surtsk> |
| Follow-on maintenance |
| P |
| E.5.3.2.3.11 |
| <followon.maintsk> |
MIL-STD-40051-2B
Reference
Element Name
EQUIPMENT/USER FITTING INSTRUCTIONS WORK PACKAGE
| PMCS INTRODUCTION WORK PACKAGE |
| R |
| E.5.3.4.1 |
| <pmcsintrowp> |
| PMCS WORK PACKAGE |
| R |
| E.5.3.4.2 |
| <pmcswp> |
MAINTENANCE WORK PACKAGES
Maintenance tasks
Inspect
Test
Service
Adjust
Align
Calibrate
| E.5.3.5.3.7 |
| <calibration> |
Remove
Install
Replace
Repair
Paint
| Overhaul |
| P |
| E.5.3.5.3.13 |
| <overhaul> |
| Rebuild |
| P |
| E.5.3.5.3.14 |
| <rebuild> |
Lubricate
Mark
Pack
Unpack
Preserve
Prepare for use
| E.5.3.5.3.20 |
| <prepforuse> |
Assemble
Disassemble
Clean
Nondestructive inspection
Radio interference suppression
Place in service
Towing
Jacking
Parking
Mooring
Covering
Hoisting
Sling loading
External power
Preparation for shipment and storage
Arm
Load
Unload
Software maintenance
| E.5.3.5.3.39 |
| <softwaremaint> |
MIL-STD-40051-2B
Reference
Element Name
Additional maintenance task
| E.5.3.5.3.40 |
| <other.maintsk> |
Follow-on maintenance
| E.5.3.5.3.41 |
| <followon.maintsk> |
GENERAL MAINTENANCE WORK PACKAGE
| LUBRICATION INSTRUCTIONS WORK PACKAGE |
| R |
| E.5.3.8 |
| <lubewp> |
| ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGE (MAINTAINER LEVEL AND ABOVE) |
| P |
| E.5.3.10 |
| Illustrated list of manufactured items introduction work package |
| P |
| E.5.3.10.1 |
| <manu_items_introwp> |
| Manufacturing procedures work package |
| P |
| E.5.3.10.2 |
| <manuwp> |
| TORQUE LIMITS WORK PACKAGE (MAINTAINER LEVEL AND ABOVE) |
| P |
| E.5.3.11 |
| <torquewp> |
| WIRING DIAGRAMS WORK PACKAGE (MAINTAINER LEVEL AND ABOVE) |
| P |
| E.5.3.12 |
| <wiringwp> |
CHAPTER X.
AUXILIARY EQUIPMENT MAINTENANCE INSTRUCTIONS
APPENDIX E
E.5.2.6 <mim> <auxiliarycategory>
AUXILIARY EQUIPMENT MAINTENANCE WORK PACKAGE
| ILLUSTRATED LIST OF MANUFACTURED ITEMS WORK PACKAGE (MAINTAINER LEVEL AND ABOVE) |
| P |
| E.5.3.10 |
| Illustrated list of manufactured items introduction work package |
| P |
| E.5.3.10.1 |
| <manu_items_introwp> |
| Manufacturing procedures work package |
| P |
| E.5.3.10.2 |
| <manuwp> |
| TORQUE LIMITS WORK PACKAGE (MAINTAINER LEVEL AND ABOVE) |
| R |
| E.5.3.11 |
| <torquewp> |
| WIRING DIAGRAMS WORK PACKAGE (MAINTAINER LEVEL AND ABOVE) |
| P |
| E.5.3.12 |
| <wiringwp> |
CHAPTER X. AMMUNITION
MAINTENANCE INSTRUCTIONS
APPENDIX E
E.5.2.7 <mim> <ammunitioncategory>
AMMUNITION MAINTENANCE WORK PACKAGE
MIL-STD-40051-2B
Reference
Element Name
AMMUNITION MARKING INFORMATION WORK PACKAGE
| E.5.3.15.2 |
| <ammo.markingwp> |
| FOREIGN AMMUNITION (NATO) WORK PACKAGE |
| N/A |
| E.5.3.15.3 |
| <natowp> |
CHAPTER X.
PARTS INFORMATION
(-10, -13, -14) (-13&P, -14&P)
P P
| INTRODUCTION WORK PACKAGE |
| P |
| F.5.3.5 |
| <introwp> |
| REPAIR PARTS LIST WORK PACKAGE |
| P |
| F.5.3.6 |
| <plwp> |
| REPAIR PARTS FOR SPECIAL TOOLS WORK PACKAGE |
| P |
| F.5.3.7 |
| <stl_partswp> |
| KIT PARTS LIST WORK PACKAGE |
| P |
| F.5.3.8 |
| <kitswp> |
| BULK ITEM WORK PACKAGE |
| P |
| F.5.3.9 |
| <bulk_itemswp> |
| SPECIAL TOOLS LIST WORK PACKAGE |
| P |
| F.5.3.10 |
| <stlwp> |
| NSN INDEX WORK PACKAGE |
| P |
| F.5.3.11.1 |
| <nsnindxwp> |
| P/N INDEX WORK PACKAGE |
| P |
| F.5.3.11.2 |
| <pnindxwp> |
| REFERENCE DESIGNATOR INDEX WORK PACKAGE |
| P |
| F.5.3.11.3 |
| <refdesindxwp> |
CHAPTER X.
DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE
NOTE
If a separate destruction of material manual is not developed for this equipment, then the destruction chapter must be included.
| DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE INTRODUCTION WORK PACKAGE |
| R |
| H.5.3 |
| <destruct-introwp> |
| Authority to destroy |
| R |
| H.5.3.3 |
| <authorize_to_destroy |
| Reporting destruction |
| R |
| H.5.3.4 |
| <report_destruct> |
| General destruction information |
| R |
| H.5.3.5 |
| <general_destruct_inf |
o>
| Degree of destruction |
| R |
| H.5.3.6 |
Essential components and spare parts
| H.5.3.7 |
| <component_spares> |
MIL-STD-40051-2B
Reference
Element Name
| DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE PROCEDURES WORK PACKAGE |
| R |
| H.5.4 |
| <destruct-materialwp> |
Parts list
| H.5.4.3 |
| <essential_spares> |
| Specific destruction procedures |
| R |
| H.5.4.4 |
| <proc> |
CHAPTER X.
SUPPORTING INFORMATION
NOTE
Applicable supporting information work packages shall be arranged in the order in which they are presented here and numbered accordingly.
| REFERENCES WORK PACKAGE |
| R |
| G.5.2 |
| <refwp> |
| INTRODUCTION FOR NON- AVIATION TWO-LEVEL MAINTENANCE MAC WORK PACKAGE |
| P |
| G.5.3.1 |
| <macintrowp> |
| MAC WORK PACKAGE (NON- AVIATION TWO-LEVEL) |
| P |
| G.5.3.3 |
| <macwp> |
| COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS WORK PACKAGE |
| R |
| G.5.4 |
| <coeibiiwp> |
ADDITIONAL AUTHORIZATION LIST (AAL) WORK PACKAGE
| EXPENDABLE AND DURABLE ITEMS LIST WORK PACKAGE |
| R |
| G.5.6 |
| <explistwp> |
TOOL IDENTIFICATION LIST WORK PACKAGE
MANDATORY REPLACEMENT PARTS WORK PACKAGE
CRITICAL SAFETY ITEMS WORK PACKAGE
SUPPORT ITEMS WORK PACKAGE
ADDITIONAL SUPPORTING WORK PACKAGES
| REAR MATTER |
| R |
| 5.2.3 |
| <rear> |
Glossary
Alphabetical index
| NAVMAC 10772 |
| R |
| 5.2.3.3 |
| <da2028> |
| Authentication page |
| R |
| 5.2.3.4 |
| <authent> |
MIL-STD-40051-2B
Reference
Element Name
Foldout pages
| Back cover |
| R |
| 5.2.3.6 |
| <back> |
Legend R - Required P - Prohibited Shaded - As Required