Attachment 6 - ES7650_Oct2000 - MIL-STD-1916.pdf
Military Standard Oct 2000 PDF 35 KB Posted
- Attached to
- MJU-76B Pre-solicitation Synopsis
- Solicitation number
- FA8213-25-R-B009
About this file
This document is an attachment specifying the Department of Defense (DoD) Preferred Methods for Product Acceptance using MIL-STD-1916, dated October 2000. The attachment mandates that all references to previous standards (MIL-STD-105, MIL-STD-414, MIL-STD-1235, and ANSI Z1.4) in the Technical Data Package (TDP) are replaced by MIL-STD-1916. Verification Levels (VL) will replace Acceptable Quality Levels (AQLs), with VL IV specified for major characteristics and VL II for minor characteristics, establishing specific quality control parameters for the procurement action.
View the file
Other versions and copies of MIL-STD-1916
| File | Revision | Posted | Attached to |
|---|---|---|---|
| Attachment 6 - ES7650_Oct2000 - MIL-STD-1916.docx | Oct 2000 | MJU-76/B Flare, Countermeasure | |
| ES7650_Oct2000-MIL-STD-1916.pdf | Oct 2000 | BBU-35A/B Impulse Cartridges | |
| Attachment6_ES7650_Oct2000-MILSTD1916.pdf | Oct 2000 | MJU-53/B | |
| Attachment 0009 MIL-STD-1916 DOD TEST METHOD STANDARD 04-01-1996.PDF | Apr 1, 1996 | M772 & M776 Mechanical Time Super Quick (MTSQ) Fuzes | |
| Attachment 04_MIL-STD-1916.pdf | Revision not stated | 9MM Barrier Blind Cartridge | |
| Attachment_0005_-_Contractor_Acceptable_Test_Procedures_(MIL_STD_1916).pdf | Revision not stated | M110 Semi-automatic Sniper System (SASS) |
Who attaches MIL-STD-1916
Other files
Show all 30
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ES7650
MIL-STD-1916
52.245-4545 Oct 2000
The Department of Defense (DoD) Preferred Methods for this Acceptance of Product, MIL-STD-1916, shall be used for this procurement action. All references to MIL-STD-105, MIL-STD-414, MIL-STD-1235, and ANSI Z1.4 appearing in the Technical Data Package (TDP) are replaced by MIL-STD-1916.
Verification Levels (VL) shall replace AQLs and shall be VL IV for major characteristics and VL II for minor characteristics.
(End of attachment)
(ES7650)
File details come from the government source that posted it. Updated .