Attachment 12 - SPI 1370015904428.pdf
PDF 1 MB Posted
- Attached to
- MJU-76B Pre-solicitation Synopsis Federal contract opportunity
- Solicitation number
- FA8213-25-R-B009
About this file
This document is a Special Packaging Instruction (SPI) for a Flare, Countermeasure, detailing precise packaging requirements for military munitions. The SPI provides comprehensive instructions for packaging and preserving flares, including detailed specifications for container dimensions, cushioning, desiccant placement, and sealing. Key technical requirements include military preservation standards (MIL-STD-2073-1), specific marking guidelines (MIL-STD-129), and compliance with international wood packaging material standards for shipping.
The document includes multiple packaging configuration details, with specific notes about asset packaging, hazard classification requirements, and international shipping regulations. Notably, the packaging must meet heat treatment standards for wooden materials (56 degrees Centigrade for 30 minutes) and requires certification by an accredited agency recognized by the American Lumber Standards Committee. The packaging is designed to protect infrared countermeasure flares during transportation, with precise cushioning and support specifications to prevent damage.
View the file
Other files for this federal contract opportunity
Show all 30
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
CUI
NOTES
1. PLACE CUSHION REF.-1 INTO THE BOTTOM OF PA-19 CAN. PLACE SUPPORT REF.-2 ON TOP OF CUSHION REF.-1.
THE (2) SUPPORTS, REF.-2, MAY BE LAMINATED TOGETHER USING CONTACT ADHESIVE A-A-1936 OR EQUIVALENT.
2. WHEN ALL FLARES HAVE BEEN INSERTED PLACE TOP CUSHION REF.-3.
3. PLACE DESICCANT, REF.-4, INTO CUTOUT CUSHION, REF.-3. CLOSE LID ATTACH SEAL REF.-5.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1 : ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 4: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
NOTES
1. PLACE CUSHION REF.-1 INTO BOTTOM OF PA-19 CAN. PLACE FIBERBOARD SPACER REF.-2 ON TOP OF CUSHION REF.-1.
INSERT PARTITIONS REF.-3 AND REF.-4 INTO CAN.
2. INSERT 30 EACH FLARES INTO CAN LEAVING ALL OUTSIDE ROWS EMPTY. PLACE DESICCANT, REF.-7, INTO 2 OUTSIDE
CORNER SPACES, CUTTING EITHER PARTITION TO FIT.
3. WHEN ALL FLARES HAVE BEEN INSERTED PLACE FIBERBOARD SPACER REF.-5 AND CUSHION REF.-6 ON TOP OF FLARES.
4. CLOSE LID ATTACH SEAL REF.-8.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
MUNITION NOTICES
NOTICE 1 : ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING
IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG
WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.
NOTICE 4: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.
File details come from the government source that posted it. Updated .