MS 075 Gas Meter Pulser.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

ROOTS® Solid State Pulser

The ROOTS® Solid State Pulser+ generates low frequency pulses which represent volumetric information necessary for remote data collection units. Solid state construction eliminates mechanical switches and ensures maximum reliability.

No battery and no maintenance are required.

The dual connector option allows one connector to be used with your AMR system and a separate connector for your customer. These pulsers are available for our Series B3 (Life-Lubed™) meters and Series A1 (LM-MA) meters.

Shown: ROOTS® Meter Series B3 with Pulser

Features

• Bounceless Switch

• Internal Mounting

• No Battery

• No Moving Parts

• Reliable Wiegand Technology

• Rugged,Weatherproof Housing

• Corrected & Uncorrected Outputs

• Universal Interface

Specifications Loop Voltage 3-30 VDC Maximum Loop Current 10 mA Contact Bounce 0 msec Min. Pulse Width 50 msec or 50% of Duty Cycle

(whichever is smaller) Switch Closed R < 10 OHMS Switch Opened R > 1 MEGA OHM Temperature Range -40°F to +140°F

-40°C to +60°C Humidity 95% non-condensing Output* Form C Series 3 & 1 TC (Temp. Comp.) Version Non-compensated and Compensated Pulse Counter (CTR) Version Non-compensated Pulse Outputs Single or Dual Connectors

(MS Circular, Conduit, or Cable Gland) + U.S. Patent Number; 5,530,298

* Form A wiring acceptable. A two-wire Form B will not function properly.

Note: Solid State Pulser can be purchased in a conversion kit or factory installed on a ROOTS® Meter.

Version Type # Connectors P/N P/N Meter Pulse Pulse Non-Comp. Comp.

Amph. Conn. Conduit Conn. Size Rate Rate Pulse Pulse

#399 Kit #399 Kit (English) (Metric) Wiring Wiring Series B3 Counter Single 057128-060 057128-130 8C-3M 10 cf 0.1 m3 ABC (Life-Lubed) Counter Single 057128-060 057128-130 5M-11M 10 cf 1.0 m3 ABC

Counter Single 057128-060 057128-130 16M-38M 100 cf 1.0 m3 ABC Counter Single 057128-060 057128-130 56M 100 cf 10.0 m3 ABC Counter Dual 057128-070 057128-130 8C-3M 10 cf 0.1 m3 ABC Counter Dual 057128-070 057128-130 5M-11M 10 cf 1.0 m3 ABC Counter Dual 057128-070 057128-130 16M-38M 100 cf 1.0 m3 ABC Counter Dual 057128-070 057128-130 56M 100 cf 10.0 m3 ABC

TC Single 057128-310 057128-260 8C-3M 10 cf .1 m3 ABC DEF TC Single 057128-310 057128-260 5M-11M 10 cf 1.0 m3 ABC DEF TC Single 057128-310 057128-260 16M 100 cf 1.0 m3 ABC DEF TC Dual 057128-320 057128-260 8C-3M 10 cf .1 m3 ABC DEF TC Dual 057128-320 057128-260 5M-11M 10 cf 1.0 m3 ABC DEF TC Dual 057128-320 057128-260 16M 100 cf 1.0 m3 ABC DEF

LM-MA Counter Single 052901-001 052901-101 1.5M-5M 10cf 0.1m3 ABC Counter Single 052901-003 052901-103 7M-11M 10cf 1.0m3 ABC Counter Single 052901-003 052901-103 16M 100cf 1.0m3 ABC Counter Dual 052901-002 052901-102 1.5M-5M 10cf 0.1m3 ABC Counter Dual 052901-004 052901-104 7M-11M 10cf 1.0m3 ABC Counter Dual 052901-004 052901-104 16M 100cf 1.0m3 ABC

TC Single 052902-001 052902-101 1.5M-5M 10cf ABC DEF TC Single 052902-003 052902-103 7M-11M 10cf ABC DEF TC Single 052902-003 052902-103 16M 100cf ABC DEF TC Dual 052902-002 052902-102 1.5M-5M 10cf ABC DEF TC Dual 052902-004 052902-104 7M-11M 10cf ABC DEF TC Dual 052902-004 052902-104 16M 100cf ABC DEF

FM Counter Single 052901-005 052901-105 23M-38M 100cf 1.0m3 ABC (Foot Mount) Counter Single 052901-005 052901-105 56M-102M 100cf 10.0m3 ABC

Counter Dual 052901-006 052901-106 23M-102M 100cf 1.0m3 ABC Counter Dual 052901-006 052901-106 56M-102M 100cf 10.0m3 ABC

Application Guide

Note: For Series 3 Pulser-Ready Accessory Units, a credit may be applied for deduction of magnets from SSP #399 Kits.

HAZARDOUS LOCATION

INSTALLATION MUST BE IN ACCORDANCE WITH

ANSI/ISA RP 12.6OR NEC ANSI/NFPA 79, ARTICLE 504.

FOR INSTALLATION IN CANADA, INSTALL IN ACCORDANCE

WITH THE CANADIAN ELECTRICAL CODE, PART 1.

A

C

SIG

COM

Not Connected

MS CONNECTOR

(IF EQUIPPED)

NON COMPENSATED

NON-HAZARDOUS LOCATION

MAXIMUM SAFE AREA VOLTAGE 250V RMS

CAUTION: ASSOCIATED APPARATUS MUST NOT SUPPLY VOLTAGE

EXCEEDING 30 VOLTS OR CURRENT IN EXCESS OF 10 MILI-AMPS

USE CSA APPROVED POSITIVE BARRIERS HAVING THE FOLLOWING PARAMETERS:

28 Vdc (Max), 300 ohms (Min)

EXAMPLE: MTL787S (CONNECTIONS SHOWN IN DIAGRAM)

NOTE:

ACCESSORY MODEL SSP FOR USE WITH

ROOTS® SERIES B3 GAS METERS.

INSTALL IN ACCORDANCE WITH THE BARRIER MANUFACTURER'S INSTRUCTIONS.

Field Wiring Diagram Solid State Pulser

Customer Installation

Drawing Number A057159-000

SHIELDSHIELD

( GROUND)

< 1 OHM

GROUNDING BUS

TYPICAL INSTRUMENT CONNECTION

ASSOCIATED APPARATUS

+3 TO +30 VDC, <10 mA

R +VDC

PULSE IN

COMTO BARRIER

IF RESISTOR MUST BE INSTALLED, CHOOSE VALUE BY R = VDC/.01

EXAMPLE: IF VDC IS 5 VOLTS,

R = 5 /.01 = 500 OHMS.

DO NOT USE A VALUE SMALLER THAN THIS.

PRELIMINARY INFORMATION. APPROVALS NOT YET GRANTED

MTL787S

(BROWN)

(GREEN)

(RED)

B

D

F

SIG

Not Connected

MS CONNECTOR

(IF EQUIPPED)

COMPENSATED

SHIELDSHIELD

( GROUND)

< 1 OHM

GROUNDING BUS

ASSOCIATED APPARATUS

+3 TO +30 VDC, <10 mA

MTL787S

(WHITE)

(BLACK)

(BLUE)

E

MATERIAL APPROVAL SUBMITTAL

(See Instructions on Reverse)

Form Approved OMB No 9000-0062

Expires May 31, 2005

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to the Department of Defense, Washington Headquarters Services, Directorate for Information Operations and

Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project OMB No 9000-0062, Washington DC 20503. Please DO NOT RETURN your form to either of these addresses. Send your completed form to: SAF/AQCP, 1060 Air Force Pentagon, Washington DC

TO: (Contracting Officer) FROM: (Contractor) DATE

CONTRACT NUMBER SUBMISSION NUMBER SUBMITTAL

PREVIOUS SUBMISSION NUMBER PROJECT NUMBER

TO BE COMPLETED BY CONTRACTOR FOR GOVERNMENT USE ONLY

ITEM

NO.

SPECIFICATION SECTION/

PARA NO./DRAWING NO.

DESCRIPTION OF MATERIAL

(Include Type, Model Number, Catalog Number, Mfg., etc.)

AP-

PROVED

DISAP-

PROVED

SEE

REVERSE

INITIAL

BY COMPLETING THIS FORM, THE UNDERSIGNED CONTRACTOR CERTIFIES THAT

THE MATERIAL COMPLIES WITH ALL SPECIFICATIONS OF SUBJECT CONTRACT.

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

FOR GOVERNMENT USE ONLY

TO: (Base Civil Engineering Officer)

For Evaluation and Action RNLT ________________ OR SOONER

TO: (AF Contracting Office)

RECOMMEND APPROVAL DISAPPROVAL AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE

TO: (Contractor)

APPROVED

DISAPROVED AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE SIDE. REQUEST

RESUBMITTAL ON DISAPPROVED ITEMS WITHIN ____ DAYS OF DATE SHOWN BELOW.

AF IMT 3000, 20030901, V1 PREVIOUS EDITION IS OBSOLETE.

New Resubmittal

COMMENTS

(Number to correspond with applicable Item Number on reverse)

INSTRUCTIONS TO CONTRACTORS

1. The term "material" is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. This form is to be used by contractors for submitting Shop Drawings, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to be prepared in 4 copies, signed, and provided to the contracting officer with appropriate attachments.

3. Item(s) to be approved will be clearly tabbed or identified. Data pertaining to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Requests submitted shall be numbered consecutively, by contract, in the space entitled "Submission No.". This number, in addition to the Contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A single submission should be used for all work of a section of the specifications, but in NO instance should the submission include work for more than one (1) contract. Submittals requiring priority handling will be submitted by separate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

AF IMT 3000, 20030901, V1 (REVERSE)

2019-08-29T10:34:33-0500

ROLAN.PATRICK.M.1515150249

2019-08-29T10:39:55-0500

GARRIGAS.CHRISTA.L.1287173314

TO Contracting Officer: SrA Lydia SimpkinsWater

FROM Contractor: FARR Builders LLC S. Gevers, San Antonio, TX 78210

DATE: 28 August 2019

CONTRACT NUMBER: FA4661-15-D-0001

SUBMISSION NUMBER: 75

PREVIOUS SUBMISSION NUMBER: 74

PROJECT NUMBER: FNWZ 12-0053

ITEM NORow1: 1

SPECIFICATION SECTION PARA NODRAWING NORow1: Per Sow

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow1: Gas Meter Pulser Details And Specs

INITIALRow1: PR

ITEM NORow2:

SPECIFICATION SECTION PARA NODRAWING NORow2:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow2:

INITIALRow2:

ITEM NORow3:

SPECIFICATION SECTION PARA NODRAWING NORow3:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow3:

INITIALRow3:

ITEM NORow4:

SPECIFICATION SECTION PARA NODRAWING NORow4:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow4:

INITIALRow4:

ITEM NORow5:

SPECIFICATION SECTION PARA NODRAWING NORow5:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow5:

INITIALRow5:

ITEM NORow6:

SPECIFICATION SECTION PARA NODRAWING NORow6:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow6:

INITIALRow6:

ITEM NORow7:

SPECIFICATION SECTION PARA NODRAWING NORow7:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow7:

INITIALRow7:

ITEM NORow8:

SPECIFICATION SECTION PARA NODRAWING NORow8:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow8:

INITIALRow8:

ITEM NORow9:

SPECIFICATION SECTION PARA NODRAWING NORow9:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow9:

INITIALRow9:

ITEM NORow10:

SPECIFICATION SECTION PARA NODRAWING NORow10:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow10:

INITIALRow10:

ITEM NORow11:

SPECIFICATION SECTION PARA NODRAWING NORow11:

DESCRIPTION OF MATERIAL Include Type Model Number Catalog Number Mfg etcRow11:

INITIALRow11:

DATE YYYYMMDD: 2019/08/28

TYPE OR PRINT NAME AND GRADE: Wayne Owens, PS

TO Base Civil Engineering Officer: 502 CE

RNLT:

DATE YYYYMMDD_2:

TYPE OR PRINT NAME AND GRADE_2:

TO AF Contracting Office:

DATE YYYYMMDD_3: 20190829

TYPE OR PRINT NAME AND GRADE_3: Patrick Rolan, GS-12

TO Contractor:

DATE YYYYMMDD_4: 20190829

TYPE OR PRINT NAME AND GRADE_4: Christa Garrigas, CO

Text5:

Check Box6: Yes

Check Box7: Off

Check Box8: Off

Check Box9: Off

Check Box10: Off

Check Box11: Off

Check Box12: Off

Check Box13: Off

Check Box14: Off

Check Box15: Off

Check Box16: Off

Check Box17: Off

Check Box18: Off

Check Box19: Off

Check Box20: Off

Check Box21: Off

Check Box22: Off

Check Box23: Off

Check Box24: Off

Check Box25: Off

Check Box26: Off

Check Box27: Off

Check Box28: Off

Check Box29: Off

Check Box30: Off

Check Box31: Off

Check Box32: Off

Check Box33: Off

Check Box34: Off

Check Box35: Off

Check Box36: Off

Check Box37: Off

Check Box38: Off

Check Box3: Yes

Check Box50: Off

Check Box4: Yes

Check Box5: Off

Check Box39: Yes

Check Box40: Off

COMMENTS Number to correspond with applicable Item Number on reverseRow1: