MS 041 Toilet Accessories and Fire Ext.pdf

MATERIAL APPROVAL SUBMITTAL

(See Instructions on Reverse)

Form Approved OMB No 9000-0062 Expires May 31, 2005

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to the Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project OMB No 9000-0062, Washington DC 20503. Please DO NOT RETURN your form to either of these addresses. Send your completed form to: SAF/AQCP, 1060 Air Force Pentagon, Washington DC

TO: (Contracting Officer) FROM: (Contractor) DATE

CONTRACT NUMBER SUBMISSION NUMBER SUBMITTAL

PREVIOUS SUBMISSION NUMBER PROJECT NUMBER

TO BE COMPLETED BY CONTRACTOR FOR GOVERNMENT USE ONLY

ITEM

NO.

SPECIFICATION SECTION/

PARA NO./DRAWING NO.

DESCRIPTION OF MATERIAL

(Include Type, Model Number, Catalog Number, Mfg., etc.)

AP-

PROVED

DISAP-

PROVED

SEE

REVERSE INITIAL

BY COMPLETING THIS FORM, THE UNDERSIGNED CONTRACTOR CERTIFIES THAT

THE MATERIAL COMPLIES WITH ALL SPECIFICATIONS OF SUBJECT CONTRACT.

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

FOR GOVERNMENT USE ONLY

TO: (Base Civil Engineering Officer)

For Evaluation and Action RNLT ________________ OR SOONER

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

TO: (AF Contracting Office)

RECOMMEND APPROVAL DISAPPROVAL AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

TO: (Contractor)

APPROVED DISAPROVED AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE SIDE. REQUEST

RESUBMITTAL ON DISAPPROVED ITEMS WITHIN ____ DAYS OF DATE SHOWN BELOW.

DATE (YYYYMMDD) SIGNATURE

AF IMT 3000, 20030901, V1 PREVIOUS EDITION IS OBSOLETE.

Capt. Hillary Ince FARR Builders LLC S. Gevers, San Antonio, TX 78210 29 Mar.2018

FA4661-15-D-0001 41

40 FNWZ 12-0053

1 Per SOW Toilet Accessories & Details PR 1 Per SOW Fire Extinquisher PR

2018-03-29 Wayne Owens, PS

502 CE

20180410 A1C Yeongsoo Jeon

7 CONS

20180409 Patrick Rolan, GS-12 FARR Builders LLC.

20180410

TYPE OR PRINT NAME AND GRADE

1st Lt Teresa Elsbree

JEON.YEONGSOO.1538040

Digitally signed by

JEON.YEONGSOO.1538040130

Date: 2018.04.10 11:09:15 -05'00'

Digitally signed by ROLAN.PATRICK.M.1515150249 Date: 2018.04.09 16:01:34 -05'00'

COMMENTS

(Number to correspond with applicable Item Number on reverse)

INSTRUCTIONS TO CONTRACTORS

1. The term "material" is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. This form is to be used by contractors for submitting Shop Drawings, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to be prepared in 4 copies, signed, and provided to the contracting officer with appropriate attachments.

3. Item(s) to be approved will be clearly tabbed or identified. Data pertaining to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Requests submitted shall be numbered consecutively, by contract, in the space entitled "Submission No.". This number, in addition to the Contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A single submission should be used for all work of a section of the specifications, but in NO instance should the submission include work for more than one (1) contract. Submittals requiring priority handling will be submitted by separate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

AF IMT 3000, 20030901, V1 (REVERSE)

TOILET ACCESSORIES

Section 10 28 13

A8054

PROJECT: Dyess Air Force Base - Building 8040 Repair Maintenance Shop 1081 2nd Street Dyess AFB, TX 79607

CONTRACTOR: Farr Builders, LLC 3401 S. Gevers Ste. 1 San Antonio, TX 78210

ARCHITECT: Castillo Architects 981 Southpark Dr Littleton, CO

Prepared By: Tex-Oma Builders Supply Co.

2701 Commerce Street Wichita Falls, Texas 76301

Date: March 20, 2018

Dyess Air Force Base - Building 8040 DOOR HARDWARE

A8054 SECTION 08710

March 20, 2018 Page 1 of 3

Hardware Schedule

HEADING #TA (SET #TA)

1 Other Door #CLR MEN

Opening Description:

1 Mirror 747F-024360S MIHW

2 TOILET TISSUE DISP. BRAD

1 TOWEL/WASTE UNIT 2277-110000 BRAD

1 Soap Dispenser BRADLEY 4 5/8" x 10 9/16" BRAD

2 SHELF 8" X 16" 758-16000 BRAD

HEADING #TA.1 (SET #TA)

1 Other Door #CLR WOMEN

Opening Description:

1 Mirror 747F-024360S MIHW

2 TOILET TISSUE DISP. 522-000000 BRAD

1 TOWEL/WASTE UNIT 2277-110000 BRAD

1 Soap Dispenser BRADLEY 4 5/8" x 10 9/16" BRAD 2 Napkin Disposal 4781-11 BRAD 1 Napkin/Tampon Vendor BRADLEY 16 1/2" x 27 7/8" BRAD

HEADING #TA.2 (SET #TA)

1 Other Door #DLR MEN

Opening Description:

1 Mirror 747F-024360S MIHW

1 TOWEL/WASTE UNIT 2277-110000 BRAD

2 Soap Dispenser BRADLEY 4 5/8" x 10 9/16" BRAD

1 COAT RACK 36" 4 HOOKS 9944-000 BRAD

March 20, 2018 Page 2 of 3

HEADING #TA.3 (SET #TA)

1 Other Door #DLR WOMEN

Opening Description:

1 Mirror 747F-024360S MIHW

1 TOWEL/WASTE UNIT 2277-110000 BRAD

2 Soap Dispenser BRADLEY 4 5/8" x 10 9/16" BRAD

HEADING #TA.4 (SET #TA)

1 Other Door #IAP MEN 1 Other Door #IAP WOMEN

Opening Description:

2 TOILET TISSUE DISP. 522-000000 BRAD

HEADING #TA.5 (SET #TA)

1 Other Door #RESPIRATOR ROOM

Opening Description:

1 Mirror 747F-024360S MIHW

1 TOWEL/WASTE UNIT 2277-110000 BRAD

HEADING #TA.6 (SET #TA)

1 Other Door #JANITOR

Opening Description:

1 COAT RACK 36" 4 HOOKS 9944-000 BRAD

March 20, 2018 Page 3 of 3

HEADING #Div 10.1 (SET #DIV 10) 1 Other Door #PAINT WORKSHOP 1 Other Door #BLASTING WORKSHOP

Opening Description:

2 EYE WASH HAND/FOOT #19314LL MIAC

Frameless Mirror

© 2014 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 2 4/28/2014 This information is subject to change without notice.

Bradley_Mirror_747

Frameless mirror:

Model 747-XXXX with Clip Fasteners (Specify width and height)

Model 747-024360 (24" x 36") BradEX®

Product Materials MIRROR: first quality ¼" float glass, thermosetting infrared-cured paint backing.

Manufactured in accordance with ASTM C 1036 and ASTM C 1503. Edges ground and polished smooth.

Installation Verify all rough-in dimensions prior to installation.

MODEL 747: Secure mounting clips (metal) to wall with screws included, then engage mirror into clips.

Guide Specification Frameless mirror shall be of first quality 1/4" float glass, guaranteed for 15 years against silver spoilage. Edges ground and polished smooth.

Frameless Mirror shall be Bradley Model 747-______" W x______" H (specify width and height).

Model 747 series frameless mirrors can be fabricated to a maximum size of 60"W x 96"H.

ADA Compliant Consult local and national accessibility codes for proper installation guidelines.

Conformity and compliance to local and national codes is the responsibility of the installer.

Toilet Tissue Dispenser

© 2017 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 1 7/17/2017 This information is subject to change without notice.

Bradley_TPDispenser_522

Model 522 — BradEX®

Controlled Delivery Dual Roll (For Single Roll see Model 505)

Product Materials UNIT: diecast zinc. Copper and nickel polished chrome-plated finish.

Capacity Two standard core toilet tissue rolls through 5" in diameter and 4½" wide.

Operation Push button unlocks support arms to permit servicing of unit. Tension spring on stationary arm controls paper delivery.

Installation Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (included) at holes provided.

Guide Specification Surface-mounted toilet tissue dispenser shall be chrome-plated diecast zinc and hold two standard core toilet tissue rolls. Tension spring controls paper delivery.

Overall dimensions: 10-1/2"W x 27⁄16"H x 4-1/4"D.

10½ (267mm)

4¼" (108mm)

3" (76mm)

1³⁄₁₆" (30mm)

2⁷⁄₁₆" (62mm)

3" (76mm)

© 2014 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 2 4/14/2011 This information is subject to change without notice.

Bradley_CombiDispenser_2277_10_11

Towel Dispenser/Waste Receptacle

Model 2277 — Recessed BradEX®

Model 2277-10 — Semi-Recessed (recesses 3½"; projects 7")

Model 2277-11 — Surface-Mounted (projects 10½")

Contemporary Series — Satin Finish

Product Materials CABINET: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges.

DOOR: 18 gauge stainless steel. ½" return for maximum rigidity. Concealed full length stainless steel piano hinge and 2 tumbler locks keyed like other Bradley units.

TOWEL DISPENSER: furnished (manufactured by others). Rolled edge on dispenser opening.

WASTE RECEPTACLE INSERT: leakproof molded plastic.

Capacity Towel Dispenser — one standard core 8" or 9"W x 800'L roll paper towel Waste Receptacle Insert — 10.5 gal. (1.4 cu. ft.)

Operation Towel dispenser delivers preset length of towel (2½", 4" or 5" per stroke).

Waste receptacle insert removable by unlocking cabinet door. Operates with less than 5 lbs. of force.

Installation Verify all rough-in dimensions prior to installation. Recessed unit requires rough wall opening 15¾"W x 39½"H x 10¼"D (Semi-recessed unit only 3½" deep). Secure to framing with mounting screws (included) at holes provided.

Shim at screw points as required. Surface-mounted units must have holes drilled by installer.

Guide Specification Recessed combination towel dispenser and waste receptacle shall be fabricated of heavy gauge stainless steel with exposed surfaces in satin finish. Cabinet door of 18 gauge stainless steel with full length concealed piano hinge and secured by 2 tumbler locks. Towel dispenser shall be activated with less than 5 lbs. of force and have the capacity to hold one standard core 8" or 9"W x 800'L roll paper towel. Removable 10.5 gal.

leakproof molded plastic insert for waste receptacle.

Overall dimensions: 173⁄8"W x 41¼"H x 10½"D.

ADA Compliant Consult local and national accessibility codes for proper installation guidelines.

Conformity and compliance to local and national codes is the responsibility of the installer.

© 2014 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 2 of 2 4/14/2011 This information is subject to change without notice.

Bradley_CombiDispenser_2277_10_11

Dimensions

Dim. "A" Key Surface:

For Dim. "A"

Top of Rough Wall Opening

Bottom of Rough Wall Opening

Actuator top to finished floor

48" (1219mm) 52½" (1334mm) 13" (330mm)

45" (1143mm) 49½" (1257mm) 10" (254mm)

42" (1067mm) 46½" (1181mm) 7" (178mm)

40" (1016mm) 44½" (1130mm) 5" (127mm)

Rough wall opening:

Surface Mount: No rough opening, see overall dimensions

Recessed: 15¾" (401mm) Wide x 39½" (1004mm) High x 10¼" (261mm) Deep

Recessed: 15¾" (401mm) Wide x 39½" (1004mm) High x 3½" (89mm) Deep

41¼" (1048mm)

½" (13mm)

8" (203mm)

17³⁄₈" (441mm)

26⁵⁄₈" (676mm)

39¹⁄₈" (994mm)

Dim. "A" to finished floor

15¼" (387mm)

10⁹⁄₁₆" (268mm)

7⁹⁄₁₆" (192mm)

3¹⁄₁₆" (78mm)

2³⁄₈" (60mm)

2" (51mm)

35¹⁄₈" (892mm)

8" (203mm)

6A01 Soap Dispenser

© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 2 4/8/2014 This information is subject to change without notice.

Bradley_SoapDispenser_6A01

Diplomat Series

Product Materials BODY: Heavy gauge stainless steel with exposed surfaces in architectural satin finish. Front has matching curvature to other Bradley Diplomat washroom accessories.

WALL PLATE: ABS plastic.

RESERVOIR: reusable plastic, holds 27 oz.

BATTERY BOX: Plastic, holds (4), "AA" Alkaline batteries, not included.

Capacity 27 oz.(800 ml) of bulk foam soap

Operation Place hands under soap spout and hold to dispense liquid. (2"-3" sensing range.) Sight gauge indicates refill time. Refill by unlocking lock with special key (supplied), swinging open dispenser body. Remove cap to refill internal soap tank.

Installation Verify all rough-in dimensions prior to installation. Secure separate mounting bracket with mounting screws (included) at holes provided. Unlock the cover. Open and remove tank. Secure unit to wall by installing the mounting screws. Install batteries (not included). Fill tank with premixed, bulk foam soap. Close and lock the cover.

Guide Specification Soap Dispenser: Bradley Corp. Diplomat Series Model 6A01: Surface-mounted automatic soap dispenser, with face formed with contemporary contours, radii, and finish matching related accessories in manufacturer's designer series. Capacity 27 oz (800 ml). Equipped with hinged cover and completely concealed mounting plate.

Vandal resistant filler hole cover and sight gauge. Corrosion-resistant foam soap valve.

Overall dimensions: 4⁵⁄₈"W x 10⁹⁄₁₆"H x 4³⁄₁₆"D.

Model 6A01-11—Surface-Mounted Foam Tank Type Vertical BradEX®

For information on Warranties, Maintenance and BAA/ARRA Compliance, visit our web site at:

bradleycorp.com/products/accessories/.

ADA Compliant Consult local and national accessibility codes for proper installation guidelines.

Conformity and compliance to local and national codes is the responsibility of the installer.

MasterFormat Title: Commercial Toilet Accessories MasterFormat Number: 10 28 13.13

OmniClass Title: Soap Holders, Dispensers OmniClass Code: 23.40.20.21.34

6A01 Soap Dispenser

© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 2 of 2 4/8/2014 This information is subject to change without notice.

Bradley_SoapDispenser_6A01

43⁄16" (106mm)

45⁄8" (117 mm)

109⁄16" (268 mm)

Dimensions

Dim. "A" Key Surface:

For Dim. "A" Locate Top of

Unit Locate Bottom of

Unit

Bottom of dispensing tube to finished floor

48" (1219mm) 58" (1473mm) 47¹⁄₁₆" (1205mm)

45" (1143mm) 55" (1397mm) 44¹⁄₁₆" (1129mm)

42" (1067mm) 52" (1321mm) 41¹⁄₁₆" (1053mm)

40" (1016mm) 50" (1270mm) 39¹⁄₁₆" (1002mm)

Dim. "A" to finished floor

755, 756, 758 Shelf

© 2014 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 1 4/5/2013 This information is subject to change without notice.

Bradley_Shelf_755_756_758

Surface-mounted shelf:

Model 755-XX (5" depth, specify length)

Model 756-XX (6" depth, specify length)

Model 758-XX (8" depth, specify length)

Product Materials SHELF: 18 gauge stainless steel with exposed surfaces in architectural satin finish. End brackets are integral.

CENTER BRACKETS: (shelves over 24" length) 16 gauge stainless steel. Welded to shelf.

Installation Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (included) at holes provided.

Length No. of Center Brackets

6" to 24" 0

25" to 48" 1

49" to 72" 2

73" to 96" 3

97" to 112" 4

Guide Specification Surface-mounted shelf shall be fabricated of 18 gauge stainless steel with exposed surfaces in satin finish and integral end brackets. Shelves over 24" long shall have 16 gauge intermediate support brackets of matching stainless steel.

Surface-Mounted Shelf shall be Bradley Model 755, 756, 758-______" (specify length).

BradEX® Models Depth

(Inches) Length

(Inches) Overall

Dimension (Inches)

Overall Dimensions (Millimeters)

Standard Model Number

5" 12" 5 x 12 127 x 305 755-12

5" 18" 5 x 18 127 x 457 755-18

8" 24" 8 x 24 203 x 610 758-24

3¾" (95mm)

5⁄8" (16mm)

¾" (19mm)

Center Brackets spot-welded to Shelf

2" (51mm)

Length as Required

3⁄8" (10mm) 18" (457mm)

9943, 9944, 9945, 9946 Hat and Coat Rack

© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 1 2/20/2013 This information is subject to change without notice.

Bradley_CoatRack_9943_44_45_46

Model 9943 – 3 Hooks BradEX®

Model 9944 – 4 Hooks

Model 9945 – 5 Hooks

Model 9946 – 6 Hooks

Product Materials BACKPLATE: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Backplate is open through the center and does not have end caps.

HOOKS: 14 gauge stainless steel

Installation Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (included) at holes provided.

Guide Specification Surface-mounted hat and coat rack shall be fabricated of 22 gauge stainless steel in satin finish. Hooks shall be of 14 gauge stainless steel.

Dim. “A”

Dim. “B”

7¼" (184mm)

3" (76mm)

25⁄8" (67mm)

Mounting Holes

Dim. “C”

Dimensions Model No. Dim. “A” Dim. “B” Dim. “C” Hooks

9943 24" (610 mm) 9" (229 mm) 3" (76 mm) 3

9944 36" (914 mm) 10" (254 mm) 3" (76 mm) 4

9945 48" (1219 mm) 11" (279 mm) 2" (51 mm) 5

9946 60" (1524 mm) 10¾" (273 mm) 3¼" (83 mm) 6

MODEL 9944 SHOWN

9983, 9984, 9985, 9986 Utility Shelves

© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 1 2/20/2013 This information is subject to change without notice.

Bradley_UtilityShelf_9983_84_85_86

Model 9983 – 2 Hooks/3 Holders

Model 9984 – 3 Hooks/4 Holders BradEX®

Model 9985 – 4 Hooks/5 Holders

Model 9986 – 5 Hooks/6 Holders

Product Materials SHELF: 18 gauge stainless steel with exposed surfaces in architectural satin finish.

BRACKETS: 16 gauge stainless steel with exposed surfaces in architectural satin finish.

HOOKS: 14 gauge stainless steel HOLDERS: spring-activated rubber cams on plated steel retainers. Will hold a mop or broom handle with a diameter between 5/8" and 1".

DRYING ROD: 1/4" diameter solid stainless steel with satin finish.

Operation Weight of mop or broom holds handle in place.

Installation Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (not included) at holes provided.

Guide Specification Surface mounted utility shelf shall be fabricated of 18 gauge stainless steel in satin finish with 16 gauge brackets and 14 gauge hooks. Drying rod of 1/4" stainless steel. Mop and broom holders to have spring-activated rubber cams.

“C”2-11/16" (68 mm)

6-5/8" (168 mm)

DRYING ROD

MOP HOLDERS

8" (203 mm)

“B”

6-1/8" (156 mm)

1-9/16" (40 mm)

HOOKS

“A”

Dimensions Model No. Dim. “A” Dim. “B” Dim. “C” Hooks Holders

9983 30" (762 mm) 16-3/4" (425 mm) 12" (305 mm) 2 3

9984 36" (914 mm) 22-7/8" (581 mm) 10" (254 mm) 3 4

9985 42" (1067 mm) 28-7/8" (733 mm) 9" (229 mm) 4 5

9986 48" (1219 mm) 34-7/8" (886 mm) 8-3/8" (213 mm) 5 6

Napkin/Tampon Vendor

© 2017 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 2 12/11/2017 This information is subject to change without notice.

Bradley_Vendor_407_11

Model 407 — Recessed for 4" Deep Wall Model 407-11 — Surface-Mounted (projects 4½")

Contemporary Series — Satin Finish

Product Materials CABINET fabricated of 22 gauge stainless steel with exposed surfaces in architectural satin finish. All welded construction.

DOOR fabricated of 18 gauge stainless steel with exposed surfaces in architectural satin finish. Secured with full-length piano hinge and two tumbler locks keyed like other Bradley accessory units.

COIN BOX fabricated of 22 gauge stainless steel. Secured with tumbler lock keyed differently than door for security. Coin mechanisms are available with free, $.10, $.25, $.50, $1.00, Canadian $.25 or Canadian Loonie denomination.

Capacity 18 napkins (3" x 4¼" x 1" box) and 28 tampons (51⁄8" long x ¾" diameter tube).

Dispenses most popular brands.

Operation Insertion of coin permits clockwise rotation of handle to dispense product. Unit will not accept coin when product is empty. Access door allows refilling of product and emptying of coin box.

Installation Verify all rough-in dimensions prior to installation.

Recessed Unit: Requires rough wall opening 161⁄8"W x 277⁄8"H x 4"D. (fully recessed). Insert cabinet into wall opening and secure to framing (by installer) with included screws through holes provided. Shim at screw points as required.

Surface Unit: Secure cabinet to wall with screws (not included) at holes provided.

Guide Specification Surface and recessed combination napkin/tampon vendor shall be fabricated of 22 gauge stainless steel with exposed surfaces in satin finish. Door shall be fabricated of 18 gauge stainless steel with a full-length piano hinge and two tumbler locks keyed like other Bradley units. Coin box shall be secured with differently keyed lock for extra security. Two coin mechanisms shall permit dispensing eighteen napkins and twenty-eight tampons with free, $.10, $.25, $.50, $1.00, Canadian $.25 or Canadian Loonie denomination.

Overall dimensions: 17¼"W x 291⁄8"H x 43⁄8"D.

Select Model Currency Description Suffix

US Free -40

US 10¢ -42

US 25¢ BradEX® -45

Foreign Canadian 25¢ -45

US 50¢ -43

US $1.00

-44

Foreign Canadian Loonie

Napkin/Tampon Vendor

© 2017 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 2 of 2 12/11/2017 This information is subject to change without notice.

Bradley_Vendor_407_11

Recessed

Surface-Mounted

291⁄8" (740mm)

½" (13mm)4"

(102mm)

7½" (191mm)

26" (660mm)

9" (229mm)

½" (13mm)

4½" (114mm)

3" (76mm)

273⁄8" (695mm)

1713⁄16" (437mm)

155⁄8" (397mm)

291⁄8" (740mm)

7½" (191mm)

1713⁄16" (437mm)

1713⁄16" (437mm)

291⁄8" (740mm)

9½" (241mm)

26½" (673mm)

1115⁄16" (303mm)

25⁄8" (67mm)

Dimensions

4781-11 Napkin Disposal

© 2016 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Orders composed of products indicated as Bradex® will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley.

Page 1 of 1 11/17/2016 This information is subject to change without notice.

Bradley_WasteReceptacle_4781-11

Model 4781-11 — Surface-Mounted BradEX®

Standard Series — Satin Finish

Product Materials COVER: 22 gauge stainless steel with exposed surfaces in architectural satin finish. Heavy-duty stainless steel piano hinge.

CONTAINER: 22 gauge stainless steel with exposed surfaces in architectural satin finish. All welded construction with rounded front corners.

Operation Top opens for removal of waxed paper liner. Box of 500 waxed paper liners are available by ordering part number P11-022

Installation Verify all rough-in dimensions prior to installation. Secure to wall or partition with mounting screws (included) at holes provided.

Guide Specification Surface-mounted napkin disposal shall be fabricated of 22 gauge stainless steel with exposed surfaces in satin finish. Top attached by piano hinge.

Overall dimensions: 8"W x 11-3/8"H x 4-1/4"D.

Dim. "A" Key Surface: For Dim. "A" Top of Unit Bottom of Unit

Waste receptacle top lip to finished floor

40" (1016mm) 40" (1016mm) 28½" (724mm)

36" (914mm) 36" (914mm) 24½" (622mm)

32" (813mm) 32" (813mm) 20½" (521mm)

Rough wall opening:

Surface Mount: No rough opening, see overall dimensions

ADA Compliant Consult local and national accessibility codes for proper installation guidelines.

Conformity and compliance to local and national codes is the responsibility of the installer.

4-1/4" (108mm)

1³⁄₈" (35mm)

1-5/8" (41mm)

5¹⁄₈" (130mm)

Mounting Hole

(qty. 2)

8" (203mm)

11-3/8" (289mm)

S19314LL, S19314UU

Combination Drench Shower and Halo™ Eyewash with Foot Pedal

© 2018 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 1 of 2 3/6/2018 This information is subject to change without notice.

Bradley_SafetyCombi_S19314LL_UU

• Halo™ and SpinTec™ Deliver the Most Effective Shower and Eye Washdown Coverage and Spray Pattern

• Exceeds ANSI/ISEA Z358.1 Specifications

• Exceeds European EN 15154-2 and EN 15154-1

• Industry's Only Self-Draining Design – The Aquaduct™

• Separate Supply and Waste Pipes – Meets CEN and Plumbing Requirements

• Ergonomic Hand Activation Eyewash Paddle – Easy to Reach from Any Direction

• Fully-Assembled and Factory-Tested Eyewash with Hinged Dust Covers

• Universal Identification Sign and Inspection Tag Included

• Classified by Underwriters Laboratories Inc. to ANSI/ISEA Z358.1.

• Listed by Intertek to EN 15154-2 and EN 15154-1

• SpinTec showerheads are covered by one or more of the following patents: 8,113,446;

7,806,348; 8,490,895; D594,089; D669,555; Reg. Comm. Des. D001079560-0001.

Other patents pending.

• Halo is Covered by One or More of the Following Patents: 9,700,484; 9,314,398;

D662220; D673298; D662605; D685920; D662219; and D671228. Other Patents Pending.

Specifications Standard Combination Drench Shower/Eyewash Units save space and fit easily into any work environment. Shower valve operates quickly by a pull rod with a triangular handle.

Shower provides a superior washdown with a more even spray pattern. Halo eyewash, operated by an ergonomic, highly visible push handle or foot pedal, provides effective wash down coverage and spray pattern. Integral strainer reduces debris in the water and also prevents clogging.

This plumbing fixture is not intended to dispense water for human consumption through drinking or for preparation of food or beverages.

Pipe and Fittings Piping to 1-1/4" NPT water supply inlet on unit. Piping to 1-1/4" NPT drain outlet.

1-1/4" piping assembly manufactured of one of the following materials:

• Galvanized steel with BradTect® safety yellow coating

Ball Valve 1" shower ball valve and ½" stay-open eyewash valve manufactured of the following materials and supplied with type 304 stainless steel pull rod and handle:

• Chrome-plated brass

SpinTec™ Showerhead Standard showerhead is 3.1" (78.7mm) diameter highly visible yellow impact-resistant plastic. 10¾" (273mm) diameter corrosion-resistant stainless steel shroud (S19314UU).

SpinTec drench showerhead features integral 22 GPM (83.3 L) flow control (exceeds minimum water flow of 20 GPM (75.7L) at 30 PSI (2.0 bar)), conserving water and helping to accurately size your tepid water system.

SpinTec Flow Rate vs Inlet Pressure at Fixture

10 20 30 40 50 60 70 80 90

Inlet pressure at Fixture (psig)

Fl ow

R at e (g pm

Eyewash The Halo eyewash system offers a high performance rinsing platform that provides rapid relief to an individual’s eyes that have been injured by chemicals or particulate. The eyewash includes an integral 5.1 GPM (19.2 L) flow control, providing water at a safe velocity while maintaining its effectiveness (exceeds minimum water flow of 0.4 GPM (1.5 L) at 30 PSI (2.0 bar)). The eyewash is protected by flip open dust covers that open when the product is activated by Type 304 stainless steel push handle or foot activation by Type 304 stainless steel foot pedal. Safe, steady water flow under varying water supply conditions from 30–90 PSI (2.0-6.1 bar) is assured by integral flow control in the sprayhead assembly. Sprayheads are made from an impact resistant ABS plastic.

Bowl Bowl is constructed of Type 304 corrosion-resistant stainless steel.

For information on all available S19314 models, please see tech data document Bradley_SafetyCombi_S19314Series.

Model Description

S19314LL

Halo eyewash, plastic showerhead, stainless steel bowl, hand/foot activated

S19314UU

Halo eyewash, plastic showerhead w/ stainless steel shroud & bowl, hand/foot operated eyewash

Tepid Water Options

Navigator S19-2100 EFX25 Emergency Thermostatic Mixing Valve

Keltech SNA-Series Tankless Water Heater

Satisfies ANSI/ISEA Z358.1 tepid water requirements.

S19314LL, S19314UU

Combination Drench Shower and Halo™ Eyewash with Foot Pedal

© 2018 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309

800 BRADLEY (800 272 3539) +1 262 251 6000

bradleycorp.com

Page 2 of 2 3/6/2018 This information is subject to change without notice.

Bradley_SafetyCombi_S19314LL_UU

6" (152mm)

62¼" (1581mm) to bottom of base

Ø 3.1" (78.7mm)

941⁄8" (2391mm) to bottom of base

2613⁄16" (681mm)

861⁄8" (2188mm) to bottom of base

923⁄16" (2342mm) to bottom of base

Standard drain outlet

34¾" (883mm) to Bottom of Base

Foot Pedal Activation

All dimensions assume standard thread engagement. Variations in manufacturing allow for +/- 1⁄8"(3mm) per threaded joint. To find the tolerance of a dimension, add the number of thread joints across the length of the dimension and multiply it by 1⁄8" (3mm).

Eyewash Bowl

13" (330mm)

18½" (470mm)

677⁄8" (1724mm) to bottom of base

S19314 shown with Foot Pedal

Stainless Steel Ø 10¾" (273mm)

Plastic Showerhead with Stainless Steel Shroud

FIRE EXTINGUISHERS

Section 10 44 16

PROJECT: Dyess Air Force Base - Building 8040 Repair Maintenance Shop 1081 2nd Street Dyess AFB, TX 79607

CONTRACTOR: Farr Builders, LLC 3401 S. Gevers Ste. 1 San Antonio, TX 78210

ARCHITECT: Castillo Architects 981 Southpark Dr Littleton, CO

Prepared By: Tex-Oma Builders Supply Co.

2701 Commerce Street Wichita Falls, Texas 76301

Date: March 20, 2018

DYESS AIR FORCE BASE – BLDG 8040

FIRE EXTINGUISHER CLARIFICATIONS

1. Note, bracket 577 is standard for the MP20 Fire Extinguisher. Please advise if desired change on bracket for pricing.

Dyess Air Force Base - Building 8040

March 20, 2018 Page 1 of 1

Fire Extinguisher Schedule

HEADING #Div 10.1 (SET #DIV 10) 1 Other Door #PAINT WORKSHOP 1 Other Door #BLASTING WORKSHOP

Opening Description:

6 Multipurpose MP20 LARS Extinguisher

HEADING #Div 10 (SET #DIV 10) 1 Other Door #PARTS AIR LOCK 1 Other Door #CORRIDOR 1 Other Door #HOT DESK 1 Other Door #RESPIRATOR RM

Opening Description:

4 Multipurpose MP20 LARS Extinguisher

Fire Extinguishers — MP,DC & HT Series Submittal and Detail Sheet

PROJECT:_____________________________

MODEL NUMBER:_______________________

ARCHITECT:___________________________

DATE:_______________________________

LOCATION:___________________________

QUANTITY:___________________________

CONTRACTOR:_________________________

DISTRIBUTOR:_________________________

MP SERIES-Multi-Purpose Dry Chemical These units contain specially fluidized and siliconized mono ammonium phosphate powder which smothers and breaks the chain reaction on Class B fires, fuses and insulates Class A fires, and, as a non-conductor of electricity, is effective on Class C fires.

DC SERIES-Regular Dry Chemical These units contain specially siliconized sodium bicarbonate powder with free flowing and non-caking additives, suitable for fires in flammable liquids, and energized electrical equipment.

All multi-purpose and regular dry chemical units feature: Heavy DOT steel cylinders * Rugged metal valves and siphon tubes * Replaceable molded valve stem seals * Pull pin-upright squeeze grip operation * Approved to -65 degrees F. * Non-toxic * Pressure gauges*

HT SERIES-Halotron I Halotron I is an EPA approved clean agent which discharges as a rapidly evaporating liquid, leaving no residue. It effectively extinguishes Class A, B and C fires and is intended for use in areas formerly protected by Halon 1211.

MODEL

NUMBER

NOMINAL

CAPACITY

SHIPPING

WEIGHT

CYLINDER

DIAMETER

OVERALL

HEIGHT

OVERALL

WIDTH

UL

RATING

STANDARD

BRACKET*

OPTIONAL

BRACKET**

MP2½

MP5

MP5-A

MP6

MP10

MP20

2½ lbs.

5 lbs.

5 lbs.

6 lbs.

10 lbs.

20 lbs.

5½ lbs.

9¼ lbs.

9¼ lbs.

12¾ lbs.

18 lbs.

38 lbs.

3 in.

4¼ in.

4¼ in.

5 in.

5 in.

7 in.

15½ in.

15¼ in.

15¼ in.

16 in.

20in.

23¼ in.

5¾ in.

7¼ in.

7¼ in.

7¾ in.

7¾ in.

10¼ in.

1A-10B:C 2A-10B:C 3A40B:C 3A-40B:C 4A-80B:C

1OA-12OB:C

16591 16591

B-2, 818, 821, 862

818, 821, 862 808, 862

B-2, 846, 862

DC2½

DC5

DC6

DC10

DC20

2½ lbs.

5½ lbs.

6 lbs.

10 lbs.

20 lbs.

5½ lbs.

9½ lbs.

13 lbs.

18 lbs.

38 lbs.

3 in.

4¼ in.

5 in.

5 in.

7 in.

15½ in.

15¼ in.

16¼ in.

20 in.

23¼ in.

5-3/4 in.

7¼ in.

8½ in.

7-3/4 in.

10¼ in.

IOB:C

4OB:C

4OB:C

6OB:C

12OB:C

16591

B-2, 818, 821, 862

808, 862 B-2, 846, 862

HT2½

HT5

HT11

HT15½

2½ lbs.

5 lbs.

11 lbs.

15½ lbs.

5¼ lbs.

9½ lbs.

22½ lbs.

27½ lbs.

3 in.

4¼ in.

6 in.

6 in.

15½ in.

15¼ in.

21 in.

21 in.

5½ in.

5-3/4 in.

9¼ in.

9¼ in.

2B:C 5B:C

1A:10B:C 2A:10B:C

N/A N/A

*NOTE: Standard brackets are included with all extinguishers at no additional cost. If specified, optional brackets are only available at additional cost. All of the above brackets are designed to accommodate Larsen's extinguishers. While most comparably sized extinguishers usually will function with the above brackets, Larsen's cannot assume responsibility for variations in cylinder dimensions among various extinguisher suppliers.

LARSEN'S MANUFACTURING COMPANY

7421 Commerce Lane N.E., Mpls, MN 55432

Phone: (763) 571-1181 FAX: (763) 571-6900 www.larsensmfg.com

FLORIDA DIVISION:

3130 N.W. 17th Street, Ft. Lauderdale, FL 33311 Phone: (954) 486-3325 FAX: (954) 486-3352

©2011 Larsen's Mfg. Co.