MS 063 Store Front Doors and Windows.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

LEGENDS & SYMBOLS:

FINISH TYPE & COLOR:

GLASS MAKE UP:

GLAZING

TYPE:

DESCRIPTION:

SYSTEM:

- Oldcastle BuilidingEnvelope

-- FG3000 Multiplane, Center Set Glazed with

1" glazing

INDEX:

SHEET

NUMBER

DESCRIPTION

DRAWN BY:

BM

CHECKED:

DATE ON PLANS:

SHEET NUMBER:

1.01

3.01

COVER PAGE

N

O R

T H

S

E

A B

I L

X

P

F

A.F.F. = ABOVE FINISHED FLOOR

CL. = CENTER LINE

DIM. = DIMENSION

D.L.O. = DAYLIGHT OPENING

D.O. = DOOR OPENING

E. = EXISTING

EL. = ELEVATION

F.F. = FINISH FLOOR

N.I.C. = NOT IN CONTRACT

N.T.S. = NOT TO SCALE

REF. = REFERENCE

U.N.O. = UNLESS NOTED OTHERWISE

V.I.F. = VERIFY IN FIELD

· The Labeled Dimensions

ARE NOT Exact. They Are An Educated Rough Estimate Based On The Plans Provided.

FINISHED WOOD PLYWOOD

BATT INSULATIONDIMENSION LUMBER

GROUTFACE BRICK

GLAZED TILERIGID INSULATION

MARBLECUT STONE

ACOUSTICAL CEILINGCONCRETE

SHIM PACKCONCRETE BLOCK

ALUMINUMSTEEL IN SECTION

DENOTES BLOCKING OR SHIM, NOT CONTINUOUS

NOT NECESSARILY ONE PIECE & NOT BY

DENOTES BACKER ROD OR CAULK ROPE

ANCHOR LOCATION

FASTNER LOCATION

DIMENSIONAL REFERENCE / ELEVATION

WORKING POINT

S FIELD APPLIED SEALANT

SHOP DRILLSD

FIELD DRILLFD

GLAZING INDICATION NUMBER1

5.01

DETAIL NUMBER

SHEET NUMBER

15 A4.01 ARCHITECTURAL SHEET NO.

DETAIL NO.

ARCHITECTURAL DETAIL NO.

ELEVATION TITLE (LARGE TRIANGLE)

REVISION NUMBER (SMALL TRIANGLE)

ELEVATION LOCATION - VIEW POINTA

4.01 ELEVATION MARK/TITLE

ELEVATION SHEET TITLE

DENOTES NORTH DIRECTION

Dark Bronze Anodized

DETAILS

IN

W

G

BOLD & UNDERLINED ARE MOST COMMONLY USED

DYESS

AIR FORCE BASE - TEXAS

SHOP DRAWINGS PROVIDED FOR:

3443 NORTH 1ST STREET

ABILENE, TX 79603

PH: 325-673-8141

FAX: 325-673-8143

INSTALLER:

7TH ENGINEER SQUADRON

ABILENE, TEXAS

1.01

ABBREVIATIONS:

GLAZED

BY:

SUPPLIED

BY:

BINSWANGER

GLASS

BINSWANGER GLASS

1/22/19

REVISION DATE:

C

IT

: C

ST

IL

1" IGU HEAT TREATED/LAMINATED

" BRONZE

" SPACER

" CLEAR LAMINATED

ELEVATIONS

- Oldcastle BuilidingEnvelope

-- Narrow Stile Door with 10" Bottom Rail, glazed with

" laminated glazing

" BRONZE LAMINATED

2.01

FLOOR PLAN

2.02-2.04

***REVIEW AND APPROVAL OF THE WITHIN DRAWINGS ARE ONLY FOR CONFORMANCE WITH THE GENERAL DESIGN CONCEPT OF THE PROJECT GENERALLY EXPRESSED IN THE CONTRACT DOCUMENTS. REVIEW AND APPROVAL OF THE WITHIN DRAWING ARE NOT CONDUCTED FOR THE PURPOSE OF DETERMINING THE ACCURACY AND

COMPLETENESS OF DETAILS, LIKE DIMENSIONS OR QUANTITIES, OR FOR SUBSTANTIATING INSTRUCTIONS FOR THE INSTALLATION OF PERFORMANCE OF THE SYSTEMS, ALL OF WHICH REMAIN THE RESPONSIBILITY OF THE CONTRACTOR AS REQUIRED BY THE CONTRACT DOCUMENTS. THE DP'S REVIEW AND APPROVAL SHALL NOT

CONSTITUTE APPROVAL OF ANY CONSTRUCTION MEANS, METHODS, TECHNIQUES, SEQUENCES, OR ANY SAFETY PRECAUTIONS OR PROCEDURES AND APPROVAL OF SPECIFIC ITEMS SHALL NOT INDICATE APPROVAL OF ANY ASSEMBLY OF WHICH THE ITEM IS A COMPONENT.

2.02

2.03

2.04

D

FLOOR PLAN

2.01

(1) Thus

Oldcastle BuildingEnvelope

- FG3000 Multiplane, Center Set

Glazing Type:

1"

" Bronze

" Air Spacer

" Clear Laminated

Heat Treated/Laminated

Finish: Dark Bronze Anodized

AutoCAD SHX Text

F.W. . V.I.F.

D.L.O. V.I.F.

R.O..

D.L.O. V.I.F..

F.H. V.I.F..

Door Mark #: 1

" Bronze Laminated

D

Door Mark #: 1

" Bronze Laminated

3.01 4

QTY:

Description:

Catalog Number:

1 ea.

Offset Pivots

Intermediate Pivots

Surface Closer

Pull/Push

Cylinder

Thumbturn

OP-6 & 7, OP-9 &10

OP-11

LCN 4040

PB-21, PH-20

CY-1

CY-3

Manufacturer:

Manufacturer Standard

QTY:

Description:

Catalog Number:

Offset Pivots

Intermediate Pivots

Surface Closer

Pull/Push

Cylinder

Thumbturn

OP-6 & 7, OP-9 &10

OP-11

LCN 4040

PB-21, PH-20

CY-1

CY-3

Manufacturer:

D.O..

D.O.

D.O.

D.O..

(4) Thus

3.01 4

3.01 6

FG-3000 Multiplane

Intermediate

Horizontal

Sub-sill & sill

Jamb Vertical

Head

Vertical

Sub-sill & sill

Frame Head &

Top Rail

Frame Jamb &

Narrow Stile

9 Oldcastle

BuildingEnvelope

10" Bottom Rail with Threshold

ANCHOR BOLTS

MO-244/MO-678 HEAD RECEPTORS W/ V-11 GASKETS

SHIM, BACKER ROD & SEALANT

FG-3495 HEAD

FG-1133 TYP.

1" GLAZING

FG-3144 GLASS STOP

FG-3198 SILL

1/4" WEEP HOLES REQ'D IN FLASHING @ CENTER LINE OF MULLIONS

ANCHOR BOLT, CAP SEALED

CONT. SEAL

FG-3223 SILL FLASHING

FG-3000- FP-15 SILL ANCHOR

1" GLAZING ON FG-3220 SETTING BLOCK

FS-8(#14 X 1" HH SLOTTED) ASS'Y SCREW TYP.

FG-3495 JAMB

FG-2122 ALUM. FILLER 4" LONG @ ANCHORS, RUN FG-2188 VINYL FILLER BETWEEN (OPTIONAL)

ACCESS HOLE

ANCHOR BOLT

END DAM @ SILL FLASHING SET IN SEALANT

SEE HORIZ. FOR WATER DIVERTER INFO

FG-3197 HORIZONTAL

FG-3220 SETTING BLOCK (2) PER D.L.O.

FG-1000-FP-2 WATER DIVERTER SET IN SEALANT

FS-8 (#14 X 1" HH SLOTTED) ASS'Y SCREW TYP.

SEE HORIZ. VIEW FOR WATER DIVERTER INFO

FG-3495

FG-3514 COMPOSITE FILLER

FG-3198 SILL

1/4" WEEP HOLES REQ'D IN FLASHING @ CENTER LINE OF MULLIONS

ANCHOR BOLT, CAP SEALED

CONT. SEAL

FG-3223 SILL FLASHING

FG-3000- FP-15 SILL ANCHOR

1" GLAZING ON FG-3220 SETTING BLOCK

FG-2145

*FG-2120

FG-3220

FG-3163

FG-2145

*FG-2120

FG-3156

FG-2188

VINYL

FILLER

D-3

D-1

S-148

D-61

DYESS 1.01

Sheets and Views

DYESS-TITLE PAGE

DYESS 2.01

Sheets and Views

DYESS-2.01

DYESS 2.02

Sheets and Views

DYESS-2.02

DYESS 2.03

Sheets and Views

DYESS-2.03

DYESS 2.04

Sheets and Views

DYESS-2.04

DYESS 3.01

Sheets and Views

DYESS-3.01

MATERIAL APPROVAL SUBMITTAL

(See Instructions on Reverse)

Form Approved OMB No 9000-0062 Expires May 31, 2005

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to the Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project OMB No 9000-0062, Washington DC 20503. Please DO NOT RETURN your form to either of these addresses. Send your completed form to: SAF/AQCP, 1060 Air Force Pentagon, Washington DC

TO: (Contracting Officer) FROM: (Contractor) DATE

CONTRACT NUMBER SUBMISSION NUMBER SUBMITTAL

PREVIOUS SUBMISSION NUMBER PROJECT NUMBER

TO BE COMPLETED BY CONTRACTOR FOR GOVERNMENT USE ONLY

ITEM

NO.

SPECIFICATION SECTION/

PARA NO./DRAWING NO.

DESCRIPTION OF MATERIAL

(Include Type, Model Number, Catalog Number, Mfg., etc.)

AP-

PROVED

DISAP-

PROVED

SEE

REVERSE INITIAL

BY COMPLETING THIS FORM, THE UNDERSIGNED CONTRACTOR CERTIFIES THAT

THE MATERIAL COMPLIES WITH ALL SPECIFICATIONS OF SUBJECT CONTRACT.

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

FOR GOVERNMENT USE ONLY

TO: (Base Civil Engineering Officer)

For Evaluation and Action RNLT ________________ OR SOONER

TO: (AF Contracting Office)

RECOMMEND APPROVAL DISAPPROVAL AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE

TO: (Contractor)

APPROVED DISAPROVED AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE SIDE. REQUEST

RESUBMITTAL ON DISAPPROVED ITEMS WITHIN ____ DAYS OF DATE SHOWN BELOW.

AF IMT 3000, 20030901, V1 PREVIOUS EDITION IS OBSOLETE.

Y

OF SUBJECT CONTRACT.

Capt. Hillary Ince FARR Builders LLC S. Gevers, San Antonio, TX 78210 23 Jan. 2019

FA4661-15-D-0001 63

62 FNWZ 12-0053

1 Per Sow Store Front Doors And Windows 2 Per Sow Drawings 3 Per Sow Floor Plan 4 Per Sow Elevations 5 Per Sow Details

2019-01-23 Wayne Owens, PS

502 CE

1515150249C

Typewritten Text

20190215 Patrick Rolan, GS-12

1514202059A

20190215

Merry Sargent-Green, CO

COMMENTS

(Number to correspond with applicable Item Number on reverse)

INSTRUCTIONS TO CONTRACTORS

1. The term "material" is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. This form is to be used by contractors for submitting Shop Drawings, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to be prepared in 4 copies, signed, and provided to the contracting officer with appropriate attachments.

3. Item(s) to be approved will be clearly tabbed or identified. Data pertaining to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Requests submitted shall be numbered consecutively, by contract, in the space entitled "Submission No.". This number, in addition to the Contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A single submission should be used for all work of a section of the specifications, but in NO instance should the submission include work for more than one (1) contract. Submittals requiring priority handling will be submitted by separate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

AF IMT 3000, 20030901, V1 (REVERSE)

2019-02-15T11:44:21-0600

ROLAN.PATRICK.M.1515150249

2019-02-19T13:27:45-0600

SARGENTGREEN.MERRY.K.1138303361