MS 043A Finish Hardware stanley cover letter.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

DISCOUNT %

P.O.# PRICE LIST

Distributor: Dist. PO Number:

Acct#:

Proj Mgr Email:

Address:

City: State: Zip Code:

Phone: Fax:

Contractor:

Job Name:

Contact Email:

Company:

School District (if applicable):

Project Address:

Required Information Regarding Stanley Distributor

Project Manager:

Required Information Regarding Project Contractor

Contact Person:

Contact Mobile:

Proj Mgr Mobile:

Building Turnover Date:

CONTRACT CONSTRUCTION ORDER FULFILLMENT COVER LETTER

MUST BE SUBMITTED WITH COMPLETE INFORMATION, INCLUDING P.O. AND HARDWARE SCHEDULE

QUOTE NUMBER

Required Information Regarding the End User

School Name (if applicable):

For Stanley Use Only

End User Customer #: Keying System

Notes

Customer Number Stanley Security Solutions, Inc.

6161 East 75th Street

Indianapolis, IN 46250 Phone: 800-964-5625 www.stanleysecuritysolutions.com

Patented, Premium or Standard

If Received

Perm. Core Due Date (REQUIRED) denny.farley

Typewriter

Tex-Oma Builders Supply

2701 Commerce Street

Wichita Falls

Texas

76301

940-766-4269

Highlight

Underline admin

Danny Craig danny.craig@tex-oma.com

940-766-4030

1515150249C

Typewritten Text

Dyess AFB, Texas

Skip Constantine paul.constantine@us.af.mil

325-660-5997

COMMENTS

(Number to correspond with applicable Item Number on reverse)

INSTRUCTIONS TO CONTRACTORS

1. The term "material" is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. This form is to be used by contractors for submitting Shop Drawings, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to be prepared in 4 copies, signed, and provided to the contracting officer with appropriate attachments.

3. Item(s) to be approved will be clearly tabbed or identified. Data pertaining to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Requests submitted shall be numbered consecutively, by contract, in the space entitled "Submission No.". This number, in addition to the Contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A single submission should be used for all work of a section of the specifications, but in NO instance should the submission include work for more than one (1) contract. Submittals requiring priority handling will be submitted by separate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

AF IMT 3000, 20030901, V1 (REVERSE)

COMMENTS Number to correspond with applicable Item Number on reverseRow1: The locksmith comments:

Since there isn't a lot of doors to be cored up, I will acquire codes for the building and pin the cores myself. Just send the blank cores and keys to me.

Delivered cores/keys to Building 8024.

Thanks, Skip Constantine, Dyess AFB Locksmith

2018-05-08T14:52:32-0500

ROLAN.PATRICK.M.1515150249

MATERIAL APPROVAL SUBMITTAL

(See Instructions on Reverse)

Form Approved OMB No 9000-0062

Expires May 31, 2005

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to the Department of Defense, Washington Headquarters Services, Directorate for Information Operations and

Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project OMB No 9000-0062, Washington DC 20503. Please DO NOT RETURN your form to either of these addresses. Send your completed form to: SAF/AQCP, 1060 Air Force Pentagon, Washington DC

TO: (Contracting Officer) FROM: (Contractor) DATE

CONTRACT NUMBER SUBMISSION NUMBER SUBMITTAL

PREVIOUS SUBMISSION NUMBER PROJECT NUMBER

TO BE COMPLETED BY CONTRACTOR FOR GOVERNMENT USE ONLY

ITEM

NO.

SPECIFICATION SECTION/

PARA NO./DRAWING NO.

DESCRIPTION OF MATERIAL

(Include Type, Model Number, Catalog Number, Mfg., etc.)

AP-

PROVED

DISAP-

PROVED

SEE

REVERSE

INITIAL

BY COMPLETING THIS FORM, THE UNDERSIGNED CONTRACTOR CERTIFIES THAT

THE MATERIAL COMPLIES WITH ALL SPECIFICATIONS OF SUBJECT CONTRACT.

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

FOR GOVERNMENT USE ONLY

TO: (Base Civil Engineering Officer)

For Evaluation and Action RNLT ________________ OR SOONER

TO: (AF Contracting Office)

RECOMMEND APPROVAL DISAPPROVAL AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE

TO: (Contractor)

APPROVED

DISAPROVED AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE SIDE. REQUEST

RESUBMITTAL ON DISAPPROVED ITEMS WITHIN ____ DAYS OF DATE SHOWN BELOW.

AF IMT 3000, 20030901, V1 PREVIOUS EDITION IS OBSOLETE.

New Resubmittal

COMMENTS

(Number to correspond with applicable Item Number on reverse)

INSTRUCTIONS TO CONTRACTORS

1. The term "material" is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. This form is to be used by contractors for submitting Shop Drawings, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to be prepared in 4 copies, signed, and provided to the contracting officer with appropriate attachments.

3. Item(s) to be approved will be clearly tabbed or identified. Data pertaining to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Requests submitted shall be numbered consecutively, by contract, in the space entitled "Submission No.". This number, in addition to the Contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A single submission should be used for all work of a section of the specifications, but in NO instance should the submission include work for more than one (1) contract. Submittals requiring priority handling will be submitted by separate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

AF IMT 3000, 20030901, V1 (REVERSE)

PROJECT:

LOCATION:

TEX-OMA BUILDERS PROJECT NUMBER:

GENERAL CONTRACTOR:

ARCHITECT:

SCHEDULE FOR FINISHED HARDWARE

(Please Use the Spaces Allocated Below for Approval Stamps or

Notes)

▼ CONTRACTOR APPROVAL STAMP & NOTES ▼

▼ ARCHITECTURAL APPROVAL STAMP & NOTES ▼

Tex-Oma Builders Supply Co.

2701 Commerce Street / Wichita Falls, TX 76301 Phone: (940) 766-4269 / Fax: (940) 766-4030 juan.aguilar

DYESS AIR FORCE BASE - BUILDING 8040

DYESS AIR FORCE BASE, TX

A8054

FARR BUILDERS LLC

CASTILLO ARCHITECTS

DISCOUNT %

P.O.# PRICE LIST

Distributor: Dist. PO Number:

Acct#:

Proj Mgr Email:

Address:

Contractor:

Job Name:

Company:

School District (if applicable):

Project Address:

Required Information Regarding Stanley Distributor

Project Manager:

Required Information Regarding Project Contractor

Proj Mgr Mobile:

Building Turnover Date:

CONTRACT CONSTRUCTION ORDER FULFILLMENT COVER LETTER

MUST BE SUBMITTED WITH COMPLETE INFORMATION, INCLUDING P.O. AND HARDWARE SCHEDULE

QUOTE NUMBER

Required Information Regarding the End User

School Name (if applicable):

For Stanley Use Only

End User Customer #: Keying System

Notes

Customer Number Stanley Security Solutions, Inc.

6161 East 75th Street

Indianapolis, IN 46250 Phone: 800-964-5625 www.stanleysecuritysolutions.com

Patented, Premium or Standard

If Received

Perm. Core Due Date (REQUIRED)

Tex-Oma Builders Supply

Wichita Falls

Texas

76301

940-766-4269

Highlight

Danny Craig danny.craig@tex-oma.com

940-766-4030

Dyess Air Force Base - Building 8040

HARDWARE CLARIFICATIONS

1. Please complete attached Stanley Letter of Authorization to allow us to order the cylinders/cores.

2. Please note, opening 26 has been assigned a closer in order to comply with fire rating requirements.

3. Please note that locksets, rim cylinders, and cores have been changed to 7 pin verses 6 pin. Rose has been change to 3 ½ base on previous Dyess AFB project.

4. Please note, opening 9 has been confirmed as a storefront door and will be scheduled HW set 9.

Please inform us is change is required.

DOOR HARDWARE

Section 08710

PROJECT: Dyess Air Force Base - Building 8040 Repair Maintenance Shop

1081 2nd Street

Dyess AFB, TX

79607

CONTRACTOR: Farr Builders, LLC 3401 S. Gevers Ste. 1

San Antonio, TX

78210

ARCHITECT: Castillo Architects 981 Southpark Dr

Littleton, CO

Prepared By: Tex-Oma Builders Supply Co.

Wichita Falls, Texas 76301

Date: April 17, 2018

Dyess Air Force Base - Building 8040 DOOR HARDWARE

A8054 SECTION 08710

April 17, 2018 Page 2 of 3

Manufacturer List

Code Name BE Best Access Systems

FALC Falcon Lock

MC McKinney

NO Norton

PE Pemko

PR Precision

RO Rockwood

Option List

Code Description S3 ANSI Strike Package

36" 36" Door Width

SN-134 SEX NUTS - SPRAYED FINISH - 1 3/4" Door

STAMPED - Key Stamping (Specify)

CORMAX PATENTED KEYING Cormax Patented Keying

Finish List

SS Stainless Steel

26D Satin Chrome

626 Satin Chromium Plated

630 Satin Stainless Steel

689 Aluminum Painted

GREY Grey

US32D Stainless Steel, Dull

Dyess Air Force Base - Building 8040 DOOR HARDWARE

A8054 SECTION 08710

April 17, 2018 Page 3 of 3

Opening List

Opening Hdw Set Hdw Heading Opening Label Door Type Frame Type 1 9 9 D7-E

2 9 9.1 D7-E

3 6 6 D1-I

4 3 3.1 D5-E

5 5 5 D2-I

6 7 7.2 D1-I

7 5 5 D2-I

8 2 2.1 D1-I

9 9 9 D7-E

10 5 5.1 D1-I

11 5 5.1 D1-I

12 7 7 D1-I

13 7 7 D1-I

14 7 7.1 D3-I

15 7 7.1 D3-I

16 7 7.1 D1-I

17 7 7.1 D1-I

19 3 3 D5-E

21 2 2 D1-I

22 2 2 D3-I

23 4 4 D4-E

24 1 1 D4-E

25 1 1 D4-E

26 8 8.1 90Min D6-E

29 1 1 D4-E

30 2 2 D1-I

31 1 1 D4-E

32 2 2 D3-I

33 2 2 D1-I

34 2 2 D1-I

36 1 1 D4-E

April 17, 2018 Page 1 of 8

Hardware Schedule

HEADING #1 (SET #1)

1 Single Door #24 EXTERIOR from BLASTING WORKSHOP 21 90° RHR

1 Single Door #25 EXTERIOR from BLASTING WORKSHOP 21 90° LHR

1 Single Door #29 EXTERIOR from EXISTING PAINT BOOTH 23 90° LHR

1 Single Door #31 EXTERIOR from EXISTING PAINT BOOTH 23 90° RHR

1 Single Door #36 EXTERIOR from EXISTING PAINT BOOTH 23 90° RHR

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D4-E x HMF

15 Hinges MPB79 4 1/2 x 4 1/2 NRP 26D MC

2 Exit Device 2108 X 4908A 36" LHR 630 PR

3 Exit Device 2108 X 4908A 36" RHR 630 PR

5 Rim Cylinder 12E-72 STD CORMAX PATENTED KEYING 626 BE

5 Temp Core Black FALC

5 Closer P7500 SN-134 689 NO

5 Kick Plate K1050 10" x 34" US32D RO

5 Key Blanks 1AM-1MM11 STAMPED - BE

5 Weatherstrip 379 CR 1 x 36" 2 x 84" PE

5 Raindrip 346 A 40" PE

5 Door Bottom Sweep 57 AV 36" PE

5 Threshold 171 A 36" PE

15 Door Silencers 608-RKW GREY RO

5 Install Doors & INSTALL DOORS & HARDWARE MIHW

Hardware

Note: Key Blanks are to be stamped "US property - Do Not Duplicate"

April 17, 2018 Page 2 of 8

HEADING #2 (SET #2)

1 Single Door #21 BLASTING WORKSHOP 21 from TOOL CRIB 18 90° RHR

1 Single Door #22 BLASTING WORKSHOP 21 from STORAGE 19 90° LHR

1 Single Door #30 EXISTING PAINT BOOTH 23 from TOOL CRIB 24 90° RHR

1 Single Door #32 EXISTING PAINT BOOTH 23 from PAINT MIX ROOM 25 90° RHR

1 Single Door #33 EXISTING PAINT BOOTH 23 from PAINT STORAGE 26 90° RHR

1 Single Door #34 EXISTING PAINT BOOTH 23 from STENCIL ROOM27 90° RHR

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D1-I x HMF (21, 30, 33, 34)

3' 0" x 7' 0" x 1 3/4" x HMD Type D3-I x HMF (22, 32)

18 Hinges MPB79 4 1/2 x 4 1/2 26D MC

6 Lockset 9K3-7AB15D STD CORMAX PATENTED 626 BE

KEYING S3

6 Temp Core Black FALC

6 Closer P7500 SN-134 689 NO

6 Kick Plate K1050 10" x 34" US32D RO

6 Key Blanks 1AM-1MM11 STAMPED - BE

6 Door Bottom Sweep 57 AV 36" PE

6 Threshold 171 A 36" PE

18 Door Silencers 608-RKW GREY RO

6 Install Doors & INSTALL DOORS & HARDWARE MIHW

HEADING #2.1 (SET #2)

1 Single Door #8 CORRIDOR 7 to CLEAN STORAGE 5 90° LH

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D1-I x HMF

3 Hinges MPB79 4 1/2 x 4 1/2 26D MC

1 Lockset 9K3-7D15D STD CORMAX PATENTED KEYING 626 BE

S3

1 Temp Core Black FALC

1 Key Blanks 1AM-1MM11 STAMPED - BE

3 Door Silencers 608-RKW GREY RO

1 Install Doors & INSTALL DOORS & HARDWARE MIHW

HEADING #3 (SET #3)

April 17, 2018 Page 3 of 8

1 Single Door #19 EXTERIOR from PARTS AIR LOCK 15 90° LHR

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D5-E x HMF

3 Hinges MPB79 4 1/2 x 4 1/2 NRP 26D MC

1 Lockset 9K3-7AB15D STD CORMAX PATENTED 626 BE

1 Closer P7500 SN-134 689 NO

1 Kick Plate K1050 10" x 34" US32D RO

1 Weatherstrip 379 CR 1 x 36" 2 x 84" PE

1 Raindrip 346 A 40" PE

1 Door Bottom Sweep 57 AV 36" PE

1 Threshold 171 A 36" PE

HEADING #3.1 (SET #3)

1 Single Door #4 EXTERIOR SECURED RECIEVING 14 from HOT DESK 90° RHR

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D5-E x HMF

April 17, 2018 Page 4 of 8

HEADING #4 (SET #4)

1 Single Door #23 EXTERIOR from RISER ROOM 28 90° LHR

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D4-E x HMF

1 Lockset 9K3-7D15D STD CORMAX PATENTED KEYING S3 626 BE

HEADING #5 (SET #5)

1 Single Door #5 CORRIDOR 7 to BREAK ROOM 4 90° LH

1 Single Door #7 CORRIDOR 7 to BREAK ROOM 4 90° RH

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D2-I x HMF

6 Hinges MPB79 4 1/2 x 4 1/2 26D MC

2 Passage Set 9K3-0N15D S3 626 BE

2 Closer P7500 SN-134 689 NO

6 Door Silencers 608-RKW GREY RO

2 Install Doors & INSTALL DOORS & HARDWARE MIHW

April 17, 2018 Page 5 of 8

HEADING #5.1 (SET #5)

1 Single Door #10 CORRIDOR 7 to CLR MEN 8 90° RH

1 Single Door #11 CORRIDOR 7 to CLR WOMEN 9 90° RH

2 Push Plate 70C-RKW 4 X 16 US32D RO

2 Door Pull 107 X 70C US32D RO

2 Weatherstrip 379 CR 1 x 36" 2 x 84" PE

HEADING #6 (SET #6)

1 Single Door #3 CORRIDOR 7 to NCO OFFICE 3 90° RH

Note: Key Blanks are to be stamped "US property - Do Not Duplicat"

April 17, 2018 Page 6 of 8

HEADING #7 (SET #7)

1 Single Door #12 CLR MEN 8 from DLR MEN 10 90° RHR

1 Single Door #13 CLR WOMEN 9 from DLR WOMEN 11 90° LHR

2 Push Plate 70C-RKW 4 X 16 US32D RO

2 Door Pull 107 X 70C US32D RO

2 Kick Plate K1050 10" x 34" US32D RO

2 Weatherstrip 379 CR 1 x 36" 2 x 84" PE

2 Door Bottom Sweep 57 AV 36" PE

2 Threshold 171 A 36" PE

HEADING #7.1 (SET #7)

1 Single Door #14 DLR MEN 10 from IAP MEN 12 90° RHR

1 Single Door #15 DLR WOMEN 13 from IAP WOMEN 13 90° LHR

1 Single Door #16 IAP MEN 12 from RESPIRATOR ROOM16 90° RHR

1 Single Door #17 IAP WOMEN 13 from RESPIRATOR ROOM16 90° LHR

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D1-I x HMF (16, 17)

3' 0" x 7' 0" x 1 3/4" x HMD Type D3-I x HMF (14, 15)

12 Hinges MPB79 4 1/2 x 4 1/2 26D MC

4 Push Plate 70C-RKW 4 X 16 US32D RO

4 Door Pull 107 X 70C US32D RO

4 Closer P7500 SN-134 689 NO

4 Kick Plate K1050 10" x 34" US32D RO

4 Weatherstrip 379 CR 1 x 36" 2 x 84" PE

4 Door Bottom Sweep 57 AV 36" PE

4 Threshold 171 A 36" PE

12 Door Silencers 608-RKW GREY RO

4 Install Doors & INSTALL DOORS & HARDWARE MIHW

April 17, 2018 Page 7 of 8

HEADING #7.2 (SET #7)

1 Single Door #6 CORRIDOR 7 to JANITOR 6 90° LH

1 Passage Set 9K3-0N15D S3 626 BE

HEADING #8.1 (SET #8)

1 Single Door #26 EXISTING PAINT BOOTH 23 from BLASTING 90° LHR

WORKSHOP 21

Opening Description: 3' 0" x 7' 0" x 1 3/4" x HMD Type D6-E x HMF x 90Min

1 Closer P7500 SN-134 689 NO

HEADING #9 (SET #9)

1 Single Door #1

1 Single Door #9 EXTERIOR from CORRIDOR 7 90° RHR

Opening Description: 3' 0" x 7' 0" Type D7-E

2 Door Bottom Sweep(By 57 AV 36" PE

Others)

1 Threshold(By Others) 171 A 36" PE

1 Threshold(By Others) 179 AT 36" PE

April 17, 2018 Page 8 of 8

HEADING #9.1 (SET #9)

1 Single Door #2

Opening Description: 3' 0" x 7' 0" Type D7-E

1 Door Bottom Sweep(By 57 AV 36" PE

Others)

1 Threshold(By Others) 179 AT 36" PE

FM-16

800-346-7707 | www.mckinneyhinge.com Check the web site for the up-to-date catalog

McKinney is a brand associated with Corbin Russwin, Inc., an ASSA ABLOY Group company. Copyright © 2012-2017, Corbin Russwin, Inc.

All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.

Fu ll

M o rt is e H in ge s

MacPro® Five Knuckle Standard Weight Series

• Plain bearing hinges are for standard weight doors only

• For doors with a closing device, MPB79 bearing hinge must be used

• For heavy weight doors with a closing device, select a MPB68, heavy weight bearing hinge

• MacPro templated hinges are made to conform to

ANSI/BHMA 156.1, 156.7

• For available finishes consult the factory

The MacPro line offers contractor grade hinges to get the job done right. High quality MacPro hinges are an extraordinary value, ideal when you need large quantities of standard hinges.

MP79

MPB79

MPB91

Application *41/2" x 41/2"

Specifications

Inches mm Gauge No. of Holes

Fasteners

Machine Wood

41/2" x 4" 114.3 x 101.6 .134 8 1/2 x 12-24 11/4 x 12

41/2" x 41/2" 114.3 x 114.3 .134 8 1/2 x 12-24 11/4 x 12

No.

ANSI Cross Reference Base Material Weight Bearing

MP79 A8133 Steel STD Plain Bearing

MPB79 A8112 Steel STD Bearing

MPB91 A5112 Stainless* STD Bearing

Options:

NRP Non-Removable Pin

4 A P E X 2 0 0 0 S E R I E S D E V I C E S

R

IM

E X

IT

D

V

IC

S

Apex 2100 Series - Reversible Apex FL2100 Fire Exit Series - Reversible

Apex 21 Series – Nonhanded

RIM EXIT DEVICES

DOORS - For all types of single and double doors with a mullion. For mullions, see page 18. Available for 1-3/4” to 2-1/4” thick, up to 4’-0” wide opening. For thicker doors, consult factory. Furnished standard for 1-3/4” thick, 3’-0” wide opening.

DEVICE - Covers ANSI A115.2 (Type 161), A115.18 cylinder lock and A115.1 (Type 86) Mortise Lock preparation.

FUNCTIONS - Functions are field selectable except for the Double Cylinder option. The device is furnished for a desired function if specified. If not specified the “03” function is furnished standard.

DOUBLE CYLINDER - Handed, “10” Function available.

Requires two rim type cylinders, not furnished standard.

See page 5 and 19.

BASE MATERIAL - The Cover, Touchbar, Device Channel, Lock/Hinge Side Filler and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. 628 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components. See “Finish & Base Material” chart page 3.

CHASSIS - Investment Cast Steel, Zinc Dichromated.

LATCHBOLT - Stainless Steel, Deadlocking, 3/4” throw.

STRIKES - No. S300, Investment Cast Stainless Steel, Black Powder Coated furnished standard. No. S988, optional strike for use on Aluminum Door applications, please specify when ordering. No. S458, optional strike for use on Mullion applica-tions, please specify when ordering.

For optional strike information see page 34.

DOGGING - 1/4” turn hex key dogging standard. NOT available on Fire Exit Hardware.

TOUCHBAR HEIGHT - 39-15/16” from floor standard. May be varied as situation dictates.

REVERSIBLE - Reversible for all functions and Trims.

Standard packaging RHRB.

UL LISTED - Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE Ratings see page 33. Conforms to UL10C and

UBC 7-2.

ANSI/BHMA - Devices are BHMA certified for ANSI 156.3, Grade 1.

FINISHES - 605, 606, 612, 613, 625, 626W, 628, 630.

For Finish description see page 3.

CYLINDERS - Rim Type, not furnished standard. Specify when required. For cylinder details see page 19.

STILE WIDTH - See Stile Information on page 36.

RETROFIT APPLICATIONS - The 2100 and FL2100 Series Devices are designed to retrofit into other manufacturers’ mounting hole locations. 1700 Series Pull Trim and 4900 Series Lever Trim may also be factory set for these applications by specifying prefix “R” (e.g. 2108 R4908A).

Consult factory for details.

DEVICE OPTIONS

Prefix Description Page C Quick Connect Plugs DE Delayed Egress E Electric Device ELR Electric Latch Retraction FL Fire Exit Hardware HC Windstorm and Hurricane Code Device LDS Latchbolt Monitoring Double Switch LS Latchbolt Monitoring Switch MLR Motorized Latch Retraction ............................40-41 Q Wireless Access Management System ..........30-32 TDS Touchbar Monitoring Double Switch TS Touchbar Monitoring Switch WTDS Weatherized Touchbar Mon. Dbl. Switch WTS Weatherized Touchbar Monitoring Switch To specify add Prefix to Device No. (e.g. TS2103)

Suffix Description Page ALK Exit Alarm: battery operated ALW Exit Alarm: remote power BRL Braille Touchbar CD Cylinder Dogging DS Door Position Monitoring Switch LD Less Dogging SEC Security Screws SNB Sex Nut and Bolt WALW Weatherized Exit Alarm: remote power To specify add Suffix to Device No. (e.g. 2103CD)

The 21 Series Device is designed to be compatible with many manufacturers’ Access Control exterior trim. The device incor-porates a center driven cam to receive the tailpiece of the access control product. The tailpiece rotation required to retract the latch is a minimum of 50 degrees.

S300 Standard

S458 Optional

S988 Optional

Rectangle

5A P E X 2 0 0 0 S E R I E S D E V I C E S

T

IM

STRIMS

1700A “A” Grip

1700B “B” Grip

1700C “C” Grip

2000C “C” Grip

4900A “A” Lever

4900B “B” Lever

4900C “C” Lever

4900D “D” Lever

4900K “K” Knob

1. All Trims are furnished with wrought plates and extruded or cast solid grips.

2. Specify Grip Design (A,B,C) (“A” Grip furnished standard for 1700 Series Trim, “C” Grip furnished standard for 2000 Series Trim)

3. 630 Trim is furnished for 628 Devices.

4. 626 Trim is furnished for 626W Devices.

Retrofit Applications The R1700 Series Trim is designed to retrofit into other manufacturers’ installations when used with the wide stile Apex Series Devices.

V4908A Vandal Resistant Trim A heavy duty lever trim designed to with stand abuse and vandalism. Composed of extra strength shock-absorbing “overload” springs and heavy duty investment cast stainless steel internal components. Lever returns to the “home” position eliminating the need to reset the lever.

Retrofit Applications The R4900 Series Trim is designed to retrofit into other manufacturers’ installations when used with the wide stile Apex Series Devices.

1. All the escutcheons and levers are castings or forgings.

2. Specify Lever or Knob Design (A,B,C,D,K) and Handing (“A” Lever x RHRB furnished standard)

3. 626 Trim furnished for 626W, 628 and 630 Devices.

• For Trim dimensions see page 38.

• Trims are BHMA certified for ANSI 156.3, Grade 1.

• Trims are through bolted and will cover 161 and 86 cutouts (except for 2000C Trim).

• Cylinder, Rim Type, not furnished standard. For cylinder details see page 19.

ANSI 01 02 03 05 08 10* 14 15

Function Double Cylinder No Cylinder No Cylinder Exit Only Dummy Key Key Key Inside Key Lever/Knob Thumbpiece (cover plate) Trim Retracts Locks/Unlocks Locks/Unlocks Locks/Unlocks Always Always Latchbolt Thumbpiece Lever/Knob Lever/Knob Active Active Device 2101 2102 2103** 2105 2108 2110 2114 2115 Nos. FL2101 FL2103** FL2105 FL2108 FL2110 FL2114 FL2115 Trim 1701 1702A 1703A 1705A 4908A 4908A 4914A 1715A Nos. R1701 R1702A R1703A R1705A V4908A V4908A R4914A R1715A 2001 2002C 2003C 2005C R4908A R4908A 2015C

4901 4902A 4903A RV4908A RV4908A

R4901 R4902A R4903A

Device with Trim: Add Suffix: for options, see page 4.

Add Prefix: “V” Vandal Resistant Lever Trim “R” Retrofit Trim Add Suffix: Lever or Knob Design (A,B,C,D, K) Grip Design (A,B,C) Add Suffix: “KNR” Knurled Lever or Grip

Device No.

Add Prefix for options, see page 4.

Device Only: Device no., hand, finish, strike, and door size including thickness:

(e.g. TS2108CD x RHRB x 630 x S300 x 3’-0” x7’-0” x 1-3/4” ) Trim Only: Trim no., hand, finish, strike, and door size including thickness: (e.g. V4908A x RHRB x 626 x 1-3/4” )

* “10” Function is handed ** 2103 & FL2103 x Cylinder Only Application includes Cylinder Attachment Kit “CA-03”

TS2108CD x V4908AKNR x RHRB x 630 x S300 x 3’-0” x 7’-0” x 1-3/4” Device w/options Trim No. Hand Finish Strike Door Size

6 9K Series Heavy Duty Cylindrical Locks – Levers

Description Outside Lever Inside Lever

Function & Diag.

(ANSI No.)

Latch operated by Locked by Unlocked by Locked by

Unlocked

Single keyed

Entrance (AB) F109 • Rotating the inside lever,

• Rotating the outside lever– only when the inside push button is out,

• Turning the key in the outside lever

• Pushing the inside button,

• Pushing and turning the inside button. Turning the button keeps the outside lever locked until the button is turned back lever, (only when the button is not turned)

• Rotating the inside lever, (only when the button is not turned).

• Closing the door (only when the button is not turned)

Cannot be locked

Always unlocked

Storeroom (D) F86 • Turning the key in the outside lever,

• Rotating the inside lever

Always fixed Cannot be unlocked Cannot be

Service Station (E) F92

• Rotating the inside lever,

• Rotating the outside lever-only when the inside push button is out.

• Pushing the inside button,

• Pushing and turning the inside button. Turning the button keeps the outside lever locked until the button is turned back

• Closing the door-only when the button is not turned,

• Turning back the slotted button

Hotel Guest Room

(H) F93

(Indicator Included)

• Turning the key in the outside lever-only when the inside push button is out,

• Removing the core with a control key and using a special emergency key

Always fixed Key block feature is released by:

• Closing the door

Pushing the inside button projects an “occupied” indicator in the outside lever and blocks all operating keys.

Hotel Guest Room

(HJ)

(No Indicator) lever-only when the inside push button is out,

• Removing the core with a control key and using a special emergency key

Always fixed Key block feature is released by:

Pushing the inside button blocks all operating keys, but no “occupied” indicator is projected.

Classroom (R) F84 • Rotating the inside lever,

• Rotating the outside lever when not locked by key

Turning the key in the outside lever, Turning the key in the outside

Dormitory (T) F90 • Rotating the inside lever, when not locked by key or push button

• Pushing the button on the inside lever

• Rotating the inside lever (only when locked by push button),

• Closing the door (only when locked by push button)

Double keyed*

Corridor (C) F88 • Rotating the inside lever, when not locked by key, Turning the key in the inside lever Turning the key in the inside lever Cannot be

Storeroom* (G) F91 • Rotating the outside lever when not locked by key,

• Rotating the inside lever when not locked by key

• Turning the key in the inside

• Turning the key in the inside lever, outside lever

Turning the key in either the inside or the outside, locks or unlocks both sides.

* ATTENTION: Locksets that secure both sides of the door are con trolled by building codes and the Life Safety Code. In an emergency exit situation, failure to quickly unlock the inside lever could be hazardous or even fatal.

79K Series Heavy Duty Cylindrical Locks – Levers

Description Outside Lever Inside Lever

Function & Diag.

(ANSI No.)

Latch operated by Locked by Unlocked by Locked

Unlocked

Double keyed (Continued)

Intruder (IN) F11 • Rotating inside lever,

• Rotating outside lever only when not locked by inside or outside key

• Turning key in the inside lever,

• Turning key in the inside lever, Communicating*

(S) F80

• Rotating the inside or outside lever (if unlocked)

Turning the key in the outside lever Turning the key in the outside

Turning the key in the inside

Turning the key in the inside

Turning the key in either lever, locks or unlocks its own lever independently..

Communicating*

(W) F87

Always fixed Cannot be unlocked Always fixed Cannot be unlocked

Keyless

Privacy (L) F76 • Rotating the inside lever only when the inside push button is out

Pushing the inside button • Rotating the outside slotted button,

• Closing the door.

Passage (N) F75 • Rotating the inside lever, Cannot be locked Always unlocked Cannot be

Exit (NX) F89 Rotating the inside lever Always fixed Always fixed Cannot be

Patio (P) F77 • Rotating the inside lever,

• Rotating the outside lever only when the inside push button is out

Pushing the inside button • Rotating the inside lever, Exit (Y) Rotating the inside lever Cannot be

Single Dum my Trim

(1DT)

This is a single, surface-mounted lever for an inactive door or a non-latching door

* ATTENTION: Locksets that secure both sides of the door are con trolled by building codes and the Life Safety Code. In an emergency exit situation, failure to quickly unlock the inside lever could be hazardous or even fatal.

4 9K Series Heavy Duty Cylindrical Locks – Levers

Lever Styles and Trim

Shipping Weights The chart is the ap prox i mate shipping weight for the standard 9K func tions locksets. This weight includes the weight of the lockset with the “#15” style lever, “K” style rose, latch, strike package, and box. Listed separately are the ap prox i mate weights for “with core” and “less core” shipments.

Lock Function Nomenclature

Case Quantity Shipping Weight With Core

Shipping Weight Less Core

Y 9 31 lbs

N 9 40 lbs.

L,NX,P 9 40 lbs.

AB,D,E,H,HJ,R,T 9 42 lbs. 40 lbs.

C,G,IN,S,W 9 44 lbs. 40 lbs.

#14C #15C #16C

#14D

#14K

#14L

#15D

#15K

#15L

#16D

#16K

#16L

10 9K Series Heavy Duty Cylindrical Locks – Levers

8KL5 Deadlocking Latch

Bolt throw – 9/16”

Backset – 5”

Front – 2 1/4” x 1 1/8” beveled.

Tube – To fit 1” diameter hole in door edge.

To order: (with unit) designate “9K5” on How to Order (page 3).

To order: (without unit) designate “8KL5-SL” (Spring Latch) or DL (Deadlocking Latch) and finish.

8KS2 Strike (Supplied Standard)

Dimension: Conforms to ANSI A115.2 for 1 3/8” doors (2 3/4” x 1 1/8” with curved lip and box).

To order: (with unit) designate “STK” on

To order: (without unit) designate 8KS2 and finish.

8KL4 Deadlocking Latch

Backset – 3 3/4”

To order: (with unit) designate “9K4” on

“8KL4-SL” (Spring Latch) or DL

8KL3 Deadlocking Latch

Backset – 2 3/4”

To order: (with unit) designate “9K3” on

“8KL3-SL” (Spring Latch) or DL

8KS3 Strike

Dimension: Conforms to ANSI A115.2 for 1 3/4” doors (4 7/8” x 1 1/4” with curved lip).

To order: (with unit) designate “S3” on How to Order (page 3).

To order: (without unit) designate 8KS3 and fin ish.

Deadlocking Latches & Strikes

8KS3–7/8 Flat Strike

Dimension: Conforms to ANSI A115.2 for 1 3/4” doors (4 7/8” x 1 7/8” flat)

To order: (with unit) designate “S3-7/8” on How to Order (page 3).

To order: (without unit) designate 8KS3- 7/8 and fin ish.

CORMAX™ Patented Keying System BEST® CORMAX™ is the premier patented keying system offered by BEST. CORMAX will meet your needs for security, key control, and convenience. A simple solution with no compromising allowed.

CORMAX is the upgrade path for existing BEST Standard, Premium, and MX8 customers; and it is an essential element of non-residential access control as security administrators strive to eliminate the unauthorized duplication of keys.

CORMAX offers the following features and benefits:

• A long-term US utility patent that guarantees the extended useful life of the system through 2027.

• A second, independent locking mechanism that utilizes a patented set of built-in side pins to provide higher security.

• Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature.

• CORMAX cores and keys are available exclusively through BEST sales offices. Key blanks are only sold to individuals authorized by the customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer’s facility.

• CORMAX cores are certified to meet the security, safety, and reliability requirements of BHMA A156.5 Grade 1.

• Picking and drilling resistance options are available if higher levels of security are desired.

• Complete factory masterkeying service offered, and at no charge with purchase of BEST locksets and PHI exit devices.

• Keyways are organized in families of four keyways each, with double-milled and quad-milled key levels to facilitate the design of masterkey systems in multi-building campuses.

• BEST CORMAX cores are compatible with all existing BEST interchangeable core housings, eliminating the need for new or modified locksets.

CORMAX™

Patented Keying System

119K Series Heavy Duty Cylindrical Locks – Levers

STK strike (standard) S3 strike 9K door preparation with through-bolt mountings

Sample Specification Acceptable Manufacturers A. Locksets and Latchsets BEST - No Substitution.

1. Locksets and latchsets: ANSI A156.2, Series 4000, Grade 1 UL listed, extra heavy-duty cylindrical type.

2. Backset 2 3/4 inches (70mm)

3. Interchangeable core 7-pin: [Restricted keyway] [Patented] [Standard] [__________].

4. Locksets to have anti-rotational studs that are through-bolted.

5. Keyed lever with no exposed keeper hole.

6. Each lever to have independent spring mechanism designed to control lever only.

7. Outside lever sleeve seamless, 1-piece construction, hardened steel alloy.

8. Keyed Lever: Removable only after core is removed, by authorized control key, to allow access to knob keeper

9. Hub, side plate, anti-rotational studs 1-piece casting with shrouded locking lug.

B. Keys and Keying

A. Cylinders: 7-pin, interchangeable core and keyed into a [New] [Existing] factory registered Grand Masterkey System with a [Standard] [Restricted] [Patented] keyway.

1. Acceptable Material: Cylinders as manufactured by BEST.

B. Provide construction cores and keys during construction period. Construction control and operating keys and cores are not part of permanent keying system or furnished on same keyway (or key section) as permanent keying system.

C. Permanent Keys and Cores: Prepare permanent cores and keys in accordance with keying schedule. [Stamp with applicable key mark for identification.] [Do not stamp.] [__________].

D. Provide Grand Masterkeys, Masterkeys and other Security Keys.

E. Furnish keys in the following quantities:

1. [4] [_______] each Grand Masterkeys.

2. [4] [_______] each Masterkeys per set.

3. [2] [_______] each Change keys each keyed core.

4. [6] [_______] each Construction masterkeys.

5. [2] [_______] each Control keys.

6. Install permanent cores in locksets.

F. Return construction cores to [{BEST} factory representative] [Hardware manufacturer’s representative].

Strikes & Door Preparation

2 M O R T I S E A N D

12E Rim Cylinder Standard rim cylinder ap pli ca tions re quire the use of BEST’s 1E rim cyl in der series. BEST rim cylinders are interchangeable with other manufacturers’ rim cyl in ders. BEST rim cyl in ders are ma chined from solid bar stock and are avail able in a variety of fin ish es. The standard pack age for the BEST rim cylinder includes cylinder, RP3 ring package, 1E-S2 spin dle, clamp plate and clamp plate screws. BEST rim cyl in ders feature the BEST in ter change able core and may be master keyed into any existing Best system.

1E Mortise Cylinder Standard mortise applications require use of BEST’s 1E series cylinders with standard 1E-C4 cam. BEST cylinders may be al tered to func tion with oth er man u fac tur ers’ locks by use of dif fer ent cams (see page 8) and dif fer ent cyl inder rings (see page 9). Special cyl in der vari a tions are available for most ap pli ca tions (see pag es 4 & 5). BEST cylinders are ma chined from brass or bronze bar stock and are avail able in a variety of fin ish es. Ad di tion al se cu ri ty is pro vid ed by a set screw that mounts di ag o nal ly in the cyl inder wall and when tightened, holds the cylinder se cure ly in the housing. BEST mortise cylinders feature the BEST in ter change able core and may be mas ter- keyed into any existing BEST system. Contact your local Stanley Security Solutions sales office for in for ma tion on special cyl in der ap pli ca tions not listed in this catalog.

“A”

TABLE OF CONTENTS

1E Series features 1E Series specs/how to order 1E Series rings/spindles/mortise/service equipment 1E Series special cylinders ..................................................................4, 5 1EJ7J4/1EK7K4 high security cylinders Patented keying system

1E SERIES – FEATURES

1E SERIES HOW TO ORDER

IE

Specifications Specifications

Page Page

Eurocylinders Cylinders and cams 1E Cylinder special rings 5E Series specs/accessories 5E Series how to order 1E Series how to order (continued)

Cylinder diameter– 1 5⁄32” To order: example: 1E74-C4-RP3-626 Products covered by on or more of the following patents:

5,590,555 5,794,472

Cylinder diameter– 1 5⁄32” To order: example: 12E72-S2-RP3-626

Cylinder

Dimension

Door Thick ness

1E-64 1 1⁄8” 1 5⁄8” to 2 1⁄4”

1E-74 1 1⁄4” 1 7⁄8” to 2 1⁄2”

Cylinder

Dimension

Door Thick ness

12E62 1 3⁄16” 1” to 2 3⁄4”

12E72 1 11⁄32” 1 1⁄4” to 3”

1E 12E

1E 7 4 C4 RP3 626 **

Series Core Housing

Function Code

Length Code Cam or Spindle Rings Finish

See p. 12 0– dummy 6 – 6-pin 7– 7 pin housing accepts all Best cores

See p. 12 (1E74 only) Blank– Standard 22– 1 3⁄8” 24– 1 1⁄2” up to 6”

C4– Standard cam C181– Adams Rite MS cam S2– Standard spindle

RP– Rim cylinder RP1– Tapered cylinder RP2– 6 pin mortise RP3– 7 pin mortise RP4– 3E mortise

626 690 Satin*

606 612 613 619 Bright* 605 611

(See page 4-5)

(See code below) (For special cams see page 8) (For special rings see page 9)

*Indicates extra cost ** Must specify keymark and number of keys or designate L/C for less core.

O

W

6 M O R T I S E A N D

1EK7K4 High Security Cylinder

IG

C

U

IT

Y

IE

S 1E HIGH SECURITY CYLINDERS

1EJ7J4 – 1EK7K4 Cylinder Features Designed for high security applications, BEST offers the 1EJ7J4 high security cylinder and special 5C in ter change able core. This special cylinder is listed by Underwriters Laboratories as meet ing UL437 stan dard for key locks. The cylinder pro vides additional strength through a hardened stainless steel alloy ring, face and keyway disc. Cyl in der also con forms to ANSI A156.5 mortise cyl in der, Grade 1A. The 1EJ7J4 cylinder must be combinated at the fac to ry. The 1EK7K4 cyl in der is available where UL listing is not a requirement, and can be ordered uncombinated.

NOTE: Both 1EJ7J4 and 1EK7K4 require long blade key for operation.

1EJ7J4 – 1EK7K4 Cylinder Specifications Diameter: 1 5⁄32”. 1.150-32 (NS-2A) threaded mortise cylinder.

Mounting length: 7 pin– 1 1⁄16”.

Material: Brass (cylinder) and stainless steel ring.

Finish: 630 (nickel plated satin stainless steel material).

Cylinder rings: High security wrench resistant, ma chined from stainless steel, hardened, and nickel plated. Spe cial door preparation re quired.

Diameter of hole 1 3⁄4”.

Cylinder face, Keyway disc.: Stainless steel, hardenedCam:

Supplied with C258 cam. See page 8 for special cams.

To order: Designate “J4” or “K4” on Step “C”order procedure. (see page 2.)

1EJ7J4 High Security Cylinder

C

A X

P

A

N

K

IN

G

S T

CORMAX™ PATENTED KEYING SYSTEM

BEST® CORMAX™ is the premier patented keying system offered by Stanley Security Solutions.

CORMAX will meet your needs for security, key control, and convenience. A simple solution with no compromising allowed.

CORMAX is the upgrade path for existing BEST Standard, Premium, and MX8 customers; and it is an essential element of non-residential access control as security administrators strive to eliminate the unauthorized duplication of keys.

CORMAX offers the following features and benefits:

• A long-term US utility patent that guarantees the extended useful life of the system through 2027.

• A second, independent locking mechanism that utilizes a patented set of built-in side pins to provide higher security.

• Several levels of geographical exclusivity, including national exclusivity, are available via the patented side pin feature.

• CORMAX cores and keys are available exclusively through Stanley sales offices. Key blanks are only sold to individuals authorized by the customer to ensure key blanks do not end up in the possession of unauthorized personnel either inside or outside the customer’s facility.

• CORMAX cores are certified to meet the security, safety, and reliability requirements of BHMA A156.5 Grade 1.

• Picking and drilling resistance options are available if higher levels of security are desired.

• Complete factory masterkeying service offered, and at no charge with purchase of BEST locksets and PHI exit devices.

• Keyways are organized in families of four keyways each, with double-milled and quad-milled key levels to facilitate the design of masterkey systems in multi-building campuses.

• BEST CORMAX cores are compatible with all existing BEST interchangeable core housings, eliminating the need for new or modified locksets.

CORMAX™

Patented Keying System

The “A” keyway is standard for I/C products and will be supplied unless otherwise specified.

Falcon keyways shown here are equivalent to Best and Arrow I/C keyways of the same names.

Consult factory for restricted keyways not listed here.

When ordering locks or cores master keyed into existing Best, Arrow or other compatible

I/C systems, a copy of the bitting list for the existing system is required with the order.

Interchangeable core keyways

A B C D E F G HDD N Q R TDTBJ K L M

A2, A3 and A4 Systems Falcon master keying uses the A2 System (depths 0-9) standard. We can provide cores into competitors’ A4 (depths 0-5) key systems but we generate new A4 systems solely at the discretion of our Key Systems Department. We do not support the A3 System

(Depths 0-6). However, any Falcon core can be combinated to A3 specs in the field.

Interchangeable core

Advantages Interchangeable core (I/C) offers maximum flexibility to the building owner. Whenever a key is lost or stolen, locks can be rekeyed quickly by non-locksmith personnel. All it takes is the special “control” key.

This key is used to remove and install all cores in the system. Just go to the door, remove the old core and install the new one with the control key. Security is regained in seconds!

Falcon’s interchangeable cores and I/C locksets are compatible with other small format interchangeable core (SFIC) products, such as

Best and Arrow. Use our locks with their cores and vice versa. In most cases Falcon can even furnish cores master keyed into your existing Best or Arrow key system. Just include a copy of your existing bitting list with the order.

Construction cores

Interchangeable core jobs requiring construction keying are furnished with temporary cores which are keyed alike to a combination unrelated to the permanent system’s master key.

When the building is turned over to the owner, the permanent cores are installed and the construction cores are returned to Falcon Lock for credit. Orders must include the name and address of the person to whom the construction keys and permanent master and change keys should be sent.

16 • Falcon • Cylinders, keys and keying systems

Available Finishes:

CS-110 x 70C 1/17

Specifications:

MATERIAL:

Aluminum, Brass, Bronze, or Stainless Steel

FASTENERS:

#6 x 5/8" Oval Head Sheet Metal Screws; 1/4"-20 x 2 1/4" Thru Bolt & Finish Washer (standard 1 3/4" door)

OPTIONS:

• Barrier Free available in 2 1/2" clearance — use BF prefix when ordering (BF110 x 70C)

• Advise if door thickness is other than 1 3/4"

• Mounting selections for standard duty 1/4"-20 can be viewed under

Mounting Details at www.rockwoodmfg.com

PULL:

Ø 1"

SIZE:

4" x 16"

CTC:

8"

PLATE:

WEIGHT:

3.9 lbs.

ANSI A156.6:

J405

• US3/605

• US4/606

• US10/612

• US10B/613

• US10BE/613E

• US26/625

• US26D/626

• US28/628

• US32/629

• US32316

• US32D/630

• US32D316

• US32DMS

Architectural Door Accessories

Rockwood 110 x 70C - 4" x 16" Pull Plate

300 Main Street Rockwood, Pennsylvania 15557 P: 800.458.2424 • F: 800.922.9212 www.rockwoodmfg.com • orders.rockwood@assaabloy.com Copyright © 2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

CS-70C-RKW 1/17

Aluminum, Brass, Bronze, or Stainless Steel

FASTENER:

#6 x 5/8" Oval Head Sheet Metal Screws

FEATURES:

Four beveled edges

ORDERING:

OPTIONS:

1.0 lbs.

ANSI A156.6: J301

Architectural Door Accessories

Rockwood 70C-RKW - Push Plate - .050" Thick

P: 800.458.2424 • F: 800.922.9212 www.rockwoodmfg.com • orders.rockwood@assaabloy.com Copyright © 2017, Rockwood Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Rockwood Manufacturing Company is prohibited.

APPLiCATioNS

Copyright © 2015, Yale Security inc., an ASSA ABLoY Group company. All rights reserved.

reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.

7500 SERIES

InStItutIonal dooR cloSER

Regular Arm This is the only pull-side application where a double lever arm is used. it is the most power efficient application for a door closer. Sufficient frame, door and/or ceiling clearance must be considered.

Since the arm assembly projects directly out from the frame, this application may present an aesthetics issue or be prone to vandalism.

to the regular arm application. There must be sufficient frame face and/or ceiling clearance for this application. it requires a top rail on the door of just 2-1/8" (54mm). This application provides the best door control for doors in exterior walls that swing out of a building.

The entire door closer and arm assembly project from the frame, similar to the regular arm application, where matters of appearance and malicious abuse can be of concern.

Consideration must be given to depth of frame reveal.

Parallel Arm This application provides the most appealing design appearance for a surface-mounted door closer having a double lever arm. This also makes it beneficial in vandalism-prone areas. it is on the push side of the door and the arm assembly extends almost parallel to the door. in the closed position, there is very little or no hardware projecting beyond the frame face in most situations.

Due to the geometry of the arm it is approximately 25% less power-efficient than a regular arm application. The entire closer and arm assembly are mounted below the frame stop, requiring

the hold open arm.

Non-hold open arm shown Non-hold open arm shown

Non-hold open arm shown

PARALLEL ARM

Copyright © 2015, Yale Security inc., an ASSA ABLoY Group company. All rights reserved.

reproduction in whole or in part without the express written permission of Yale Security inc. is prohibited.

7500 SERIES

InStItutIonal dooR cloSER

5/8" Ref (16)

13-5/8" (346)

Hinge or Pivot

3-7/8" (98)

2-1/8" (54)

6-1/2"* (165)

1-3/4"* (44)

Mounting holes for closer body are spaced 2-3/8" (86mm) vertically x 6-3/4" (171mm) horizontally.

* This dimension will vary. Standard non-hold open arm illustrated.

Model Number

Non-Hold Open Hold Open Interior Exterior

30" (76) —

7500 7500H

36" (91) 30" (76)

42" (107) 36" (91)

48" (122) 42" (107)

54" (137) 48" (122)

with 5/8" (16mm) Frame Stop

Without Drop Plate With 7788 Drop Plate

P7500 P7500H P7580 P7500H P7580

5-7/8" (149)

6-1/4" (159)

5-3/8" (137)

2-3/4" (70)

1-7/8" (48)

Note: Contact factory if door weight exceeds 250 lbs.

379_R

Copyright © 2008, 2014 Pemko Manufacturing Co. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

379_R_CUT Rev 2 - 11.07.14

TITLE:

PREPARED FOR:

PREPARED BY:

DATE:

COMMENTS:

PERIMETER GASKETING:

ADJUSTABLE JAMB WEATHERSTRIP

AVAILABLE FINISHES: C, D, G

WIDTH: 1/2” (12.7 mm)

PROFILE HEIGHT: 1-5/16” (33.3 mm) TOTAL HEIGHT WITH INSERT: 1-15/32” (37.3 mm)

C (Clear Anodized Aluminum) D (Dark Bronze Anodized Aluminum) G (Gold Anodized Aluminum) sponge

EPDM

(R)

Example: 346 I C I 36

TYPE: Overhead Rain Drip

MATERIAL: 6063-T6 Aluminum Alloy and Temper Retainer

FINISH: A (Mill Finish), C (Clear Anodized), D (Dark Anodized), G (Gold Anodized), PW (Painted White)

LENGTHS: Up to 180"

WIDTH: 2-1/2" (63.5 mm)

HEIGHT: 5/8" (15.875 mm)

WEIGHT: Estimated per foot: 0.35 lbs

LEAD TIME: 4 working days (or less)

AVAILABLE: 346_ is shipped from Pemko’s Memphis, Ventura, Vancouver and Toronto locations

WARRANTY: 5 Years from purchase date

CROSS REFERENCE: Draftseal: DS166; Hager: 810S; Crowder: W3; NGP: 16; Reese: R201; Zero: 142A

INSTRUCTIONS, CAD DRAWINGS, PROFILE DRAWINGS and CUT SHEET Available upon request and on website

346_

Profile # Finish Length

Copyright © 2017 Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved.

Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited.

346_TS Revised

06.09.17 Page

Pemko Product Reference Tech-Spec

Commercial Door Bottoms

171_

Copyright © 2008 Pemko Manufacturing Co. All rights reserved.

171_CUT Rev 1 - 04.01.08

COMMERCIAL ThREShOLDS:

SADDLE ThREShOLDS

AVAILABLE…