MS 036 MBCI Panels.pdf

MATERIAL APPROVAL SUBMITTAL

(See Instructions on Reverse)

Form Approved OMB No 9000-0062

Expires May 31, 2005

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to the Department of Defense, Washington Headquarters Services, Directorate for Information Operations and

Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project OMB No 9000-0062, Washington DC 20503. Please DO NOT RETURN your form to either of these addresses. Send your completed form to: SAF/AQCP, 1060 Air Force Pentagon, Washington DC

TO: (Contracting Officer) FROM: (Contractor) DATE

CONTRACT NUMBER SUBMISSION NUMBER SUBMITTAL

PREVIOUS SUBMISSION NUMBER PROJECT NUMBER

TO BE COMPLETED BY CONTRACTOR FOR GOVERNMENT USE ONLY

ITEM

NO.

SPECIFICATION SECTION/

PARA NO./DRAWING NO.

DESCRIPTION OF MATERIAL

(Include Type, Model Number, Catalog Number, Mfg., etc.)

AP-

PROVED

DISAP-

PROVED

SEE

REVERSE

INITIAL

BY COMPLETING THIS FORM, THE UNDERSIGNED CONTRACTOR CERTIFIES THAT

THE MATERIAL COMPLIES WITH ALL SPECIFICATIONS OF SUBJECT CONTRACT.

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

FOR GOVERNMENT USE ONLY

TO: (Base Civil Engineering Officer)

For Evaluation and Action RNLT ________________ OR SOONER

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

TO: (AF Contracting Office)

RECOMMEND APPROVAL DISAPPROVAL AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

TO: (Contractor)

APPROVED

DISAPROVED AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE SIDE. REQUEST

RESUBMITTAL ON DISAPPROVED ITEMS WITHIN ____ DAYS OF DATE SHOWN BELOW.

DATE (YYYYMMDD) TYPE OR PRINT NAME AND GRADE SIGNATURE

AF IMT 3000, 20030901, V1 PREVIOUS EDITION IS OBSOLETE.

New Resubmittal

COMMENTS

(Number to correspond with applicable Item Number on reverse)

INSTRUCTIONS TO CONTRACTORS

1. The term "material" is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. This form is to be used by contractors for submitting Shop Drawings, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to be prepared in 4 copies, signed, and provided to the contracting officer with appropriate attachments.

3. Item(s) to be approved will be clearly tabbed or identified. Data pertaining to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Requests submitted shall be numbered consecutively, by contract, in the space entitled "Submission No.". This number, in addition to the Contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A single submission should be used for all work of a section of the specifications, but in NO instance should the submission include work for more than one (1) contract. Submittals requiring priority handling will be submitted by separate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

AF IMT 3000, 20030901, V1 (REVERSE)

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

BY MBCI PRIOR TO INSTALLATION. ALL PREFABRICATED ROOF CURBS MUST BE A

AutoCAD SHX Text

MINIMUM OF .080-THICKNESS, ONE-PIECE ALUMINUM WITH THE CURB FLANGE

AutoCAD SHX Text

DESIGNED TO MATCH THE CONFIGURATION OF THE STANDING SEAM PANEL. EACH

AutoCAD SHX Text

BY MBCI) USE OF THIS TYPE OF CURB DOES NOT REQUIRE AN ADJUSTMENT OF THE

AutoCAD SHX Text

CURB FLANGE MUST MEET WITH AN ADJACENT STANDING SEAM WITH A MINIMUM OF

AutoCAD SHX Text

6" BEYOND THE REQUIRED CURB OPENING. (ROOF CURBS AND ROOF JACKS ARE NOT

AutoCAD SHX Text

THE USE OF ANY ROOF CURB AND ROOF JACK MUST BE PRE-APPROVED

AutoCAD SHX Text

ROOF PANEL LENGTH. CUSTOMER TO PLACE ROOF CURB SIZE AND LOCATION OF EACH

AutoCAD SHX Text

%%UNOTE:%%U

AutoCAD SHX Text

CURB ON MBCI'S ROOF LAYOUT.

AutoCAD SHX Text

THE TOTAL NUMBER OF ROOF CURBS ON THIS PROJECT IS: %%U

AutoCAD SHX Text

THE DESIGN CRITERIA FOR THIS PROJECT IS AS FOLLOWS:

AutoCAD SHX Text

LIVE LOAD

AutoCAD SHX Text

WIND SPEED

AutoCAD SHX Text

COLLATERAL LOAD =

AutoCAD SHX Text %%uBUILDING CODE:

AutoCAD SHX Text

CATEGORY

AutoCAD SHX Text

IMPORTANCE FACTOR =

AutoCAD SHX Text

EXPOSURE

AutoCAD SHX Text

MAX. DEFLECTION (ROOF PANEL)=

AutoCAD SHX Text

DEAD LOAD

AutoCAD SHX Text

GROUND SNOW LOAD =

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MAX. DEFLECTION (PURLIN)=

AutoCAD SHX Text

MAX. DEFLECTION (WALL PANEL)=

AutoCAD SHX Text

MAX. DEFLECTION (GIRT)=

AutoCAD SHX Text

IBC 2015

AutoCAD SHX Text

II

AutoCAD SHX Text C

AutoCAD SHX Text N/A

AutoCAD SHX Text

20 PSF

AutoCAD SHX Text

115 MPH

AutoCAD SHX Text

0 PSF

AutoCAD SHX Text L/180

AutoCAD SHX Text

5 PSF

AutoCAD SHX Text

3.1 PSF

AutoCAD SHX Text L/180

AutoCAD SHX Text L/180

AutoCAD SHX Text L/180

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

1. ALL PREFABRICATED CURBS AND ROOF JACKS W/RELATED TRIM - NOT BY MBCI. ALL PREFABRICATED CURBS AND ROOF JACKS W/RELATED TRIM - NOT BY MBCI. 2. CLAIMS FOR SHORTAGES OR DEFECTIVE MATERIAL MUST BE MADE TO MBCI WITHIN (5) DAYS OF RECEIPT OF SHIPMENT CLAIMS FOR SHORTAGES OR DEFECTIVE MATERIAL MUST BE MADE TO MBCI WITHIN (5) DAYS OF RECEIPT OF SHIPMENT OR SHALL BE CONCLUSIVELY WAIVED. 3. CUSTOMER PLEASE MAKE ANY CHANGES OR NOTATIONS IN RED. CUSTOMER PLEASE MAKE ANY CHANGES OR NOTATIONS IN RED. 4. EXTREME CARE MUST BE EXERCISED DURING ERECTION OF ROOF PANELS AND TRIM. FOOT TRAFFIC MAY RESULT IN EXTREME CARE MUST BE EXERCISED DURING ERECTION OF ROOF PANELS AND TRIM. FOOT TRAFFIC MAY RESULT IN PERMANENT PANEL DISTORTION AND FINISH ABRASION. 5. FIELD CUTTING OF PANELS AND TRIM REQUIRES THE USE OF NIBBLERS, SNIPS, OR SHEARS TO PREVENT EDGE RUSTING. FIELD CUTTING OF PANELS AND TRIM REQUIRES THE USE OF NIBBLERS, SNIPS, OR SHEARS TO PREVENT EDGE RUSTING. DO NOT CUT THE PANELS WITH SAWS, ABRASIVE BLADES, GRINDERS OR TORCHES. 6. MBCI EXPECTS ITS CUSTOMERS TO INSPECT ALL MATERIALS WHEN THEY ARE UNLOADED AND IMMEDIATELY NOTIFY US MBCI EXPECTS ITS CUSTOMERS TO INSPECT ALL MATERIALS WHEN THEY ARE UNLOADED AND IMMEDIATELY NOTIFY US OF ANY DEFECTS, INCLUDING EXCESSIVE OIL CANNING. USE OF THE PRODUCT CONSTITUTES ACCEPTANCE AND MBCI WILL NOT AGREE TO REJECTING PANELS FOR EXCESSIVE OIL CANNING. 7. NO FACTORY MITERING OF TRIM IS PROVIDED. ALL TRIM THAT REQUIRES MITERING MUST BE ACCOMPLISHED IN THE NO FACTORY MITERING OF TRIM IS PROVIDED. ALL TRIM THAT REQUIRES MITERING MUST BE ACCOMPLISHED IN THE FIELD. 8. RUN-OFF WATER FROM METAL ROOF SYSTEM IS NOT POTABLE AND SHALL NOT BE UTILIZED FOR HUMAN CONSUMPTION. RUN-OFF WATER FROM METAL ROOF SYSTEM IS NOT POTABLE AND SHALL NOT BE UTILIZED FOR HUMAN CONSUMPTION. 9. WHEN ERECTING ROOF PANELS ARRANGE AND NEST SIDELAP JOINTS SO THAT PREVAILING WINDS BLOW OVER AND NOT WHEN ERECTING ROOF PANELS ARRANGE AND NEST SIDELAP JOINTS SO THAT PREVAILING WINDS BLOW OVER AND NOT INTO LAPPED JOINTS. 10. NEVER ALLOW PANELS TO COME INTO CONTACT WITH OR BE EXPOSED TO WATER RUN OFF FROM LEAD, COPPER, NEVER ALLOW PANELS TO COME INTO CONTACT WITH OR BE EXPOSED TO WATER RUN OFF FROM LEAD, COPPER, GRAPHITE, OR PRESSURE TREATED LUMBER. 11. OIL CANNING OF PANELS IS NOT A CAUSE FOR REJECTION. OIL CANNING OF PANELS IS NOT A CAUSE FOR REJECTION. 12. DOWNSPOUTS TO BE FIELD CUT AND MITERED. DOWNSPOUTS TO BE FIELD CUT AND MITERED. 13. THE GUTTER SYSTEM IS NOT DESIGNED TO RESIST SNOW AND ICE LOADS. GUTTER SHOULD BE PROTECTED FROM ICE THE GUTTER SYSTEM IS NOT DESIGNED TO RESIST SNOW AND ICE LOADS. GUTTER SHOULD BE PROTECTED FROM ICE AND SNOW CONCENTRATIONS WITH AN APPROPRIATE SNOW AND ICE RETENTION SYSTEM (RENTENTION SYSTEM - NOT BY MBCI) 14. EXPOSED TRIM GAUGE AND FINISH TO MATCH RELATED PANELS. TRIM COLORS TO BE LISTED ON THE TRIM SHEET. EXPOSED TRIM GAUGE AND FINISH TO MATCH RELATED PANELS. TRIM COLORS TO BE LISTED ON THE TRIM SHEET. CONCEALED TRIM MAY BE ASSORTED COLORS. 15. TO PROVIDE CONSISTENT THERMAL VALUES AT CAVITIES SUCH AS AT CORNERS, RAKE PARAPETS OR HIGH EAVE TO PROVIDE CONSISTENT THERMAL VALUES AT CAVITIES SUCH AS AT CORNERS, RAKE PARAPETS OR HIGH EAVE PARAPETS, FILLER INSULATION MUST BE INSTALLED. FIBERGLASS INSULATION (NOT SUPPLIED BY MBCI) Structural Notes: Structural Notes: 1. ALL RED OXIDE FRAMING TO CONFORM TO ASTM A-1011 WITH 55,000 PSI YIELD STRENGTH. ALL RED OXIDE FRAMING TO CONFORM TO ASTM A-1011 WITH 55,000 PSI YIELD STRENGTH. 2. MBCI'S HAT SECTIONS TO HAVE MBCI'S RED OXIDE PRIMER AND TO BE FURNISHED IN 20'-0 LENGTHS. (CUSTOMER TO MBCI'S HAT SECTIONS TO HAVE MBCI'S RED OXIDE PRIMER AND TO BE FURNISHED IN 20'-0 LENGTHS. (CUSTOMER TO FIELD CUT AS REQUIRED) THIS PAINT IS A POLYESTER/MELAMINE BASED COATING WITH A HIGH SOLIDS CONTENT. 3. 1/2" x 1-1/4" A-307 PLATED BOLTS WITH NUTS ARE PROVIDED FOR ATTACHMENT OF THE GIRTS TO THE BUILDING 1/2" x 1-1/4" A-307 PLATED BOLTS WITH NUTS ARE PROVIDED FOR ATTACHMENT OF THE GIRTS TO THE BUILDING STRUCTURE. 4. 1/2" x 1-1/4" A-307 PLATED BOLTS WITH NUTS ARE PROVIDED FOR ATTACHMENT OF THE PURLINS AND EAVESTRUTS 1/2" x 1-1/4" A-307 PLATED BOLTS WITH NUTS ARE PROVIDED FOR ATTACHMENT OF THE PURLINS AND EAVESTRUTS TO THE BUILDING STRUCTURE. 5. EAVE STRUTS ARE DETAILED AS SIMPLE SPAN. EAVE STRUTS ARE DETAILED AS SIMPLE SPAN. 6. GIRTS WILL NOT BE NOTCHED AND BEVEL CUT ENDS WILL NOT BE PROVIDED. GIRTS WILL NOT BE NOTCHED AND BEVEL CUT ENDS WILL NOT BE PROVIDED. 7. PURLINS WILL NOT HAVE NOTCHED OR BEVEL CUT ENDS. INSTALLER TO FIELD NOTCH OR BEVEL CUT AS REQUIRED. PURLINS WILL NOT HAVE NOTCHED OR BEVEL CUT ENDS. INSTALLER TO FIELD NOTCH OR BEVEL CUT AS REQUIRED. Panel Notes: Panel Notes: 1. 1'-0 WILL BE ADDED TO THE LENGTH OF EACH IMP SHEET AT EACH SIDE OF ALL CURBS (CURBS NOT BY MBCI) 1'-0 WILL BE ADDED TO THE LENGTH OF EACH IMP SHEET AT EACH SIDE OF ALL CURBS (CURBS NOT BY MBCI) 2. FOR PROJECTS IN WHICH THE IMP PANEL'S INTERIOR SKIN WILL BE WASHED DOWN FREQUENTLY, SUCH AS FOOD FOR PROJECTS IN WHICH THE IMP PANEL'S INTERIOR SKIN WILL BE WASHED DOWN FREQUENTLY, SUCH AS FOOD PROCESSING PLANTS, CONSIDERATION SHOULD BE GIVEN TO THE METAL SKINS FINISH. 3. AT IMP PANELS DUE TO THE CONDITIONS AND THE USE OF THE BUILDING, THE VAPOR DRIVE MAY BE TO THE INTERIOR AT IMP PANELS DUE TO THE CONDITIONS AND THE USE OF THE BUILDING, THE VAPOR DRIVE MAY BE TO THE INTERIOR OR EXTERIOR. IT IS THE DESIGNER'S RESPONSIBILITY TO UNDERSTAND THE PROJECTS UNIQUE ENVIRONMENTAL AND OPERATING CONDITIONS 4. IMP ROOF PANELS ARE HEAVIER AND BULKIER THAN SINGLE SKIN PANELS AND MAY REQUIRE DIFFERENT EQUIPMENT TO IMP ROOF PANELS ARE HEAVIER AND BULKIER THAN SINGLE SKIN PANELS AND MAY REQUIRE DIFFERENT EQUIPMENT TO UNLOAD AND INSTALL, AS WELL AS DIFFERENT HANDLING TECHNIQUES. REVIEW THE INSTALLATION MANUAL CAREFULLY TO ENSURE YOU HAVE A THOROUGH UNDERSTANDING OF THESE REQUIREMENTS BEFORE RECEIVING MATERIAL. 5. NOTE: STRIPPABLE FILM TO BE REMOVED FROM IMP PANEL SURFACE BEFORE INSTALATION. NOTE: STRIPPABLE FILM TO BE REMOVED FROM IMP PANEL SURFACE BEFORE INSTALATION. 6. THESE DRAWINGS SHOULD BE USED IN CONJUNCTION WITH MBCI'S IMP INSTALLATION MANUAL, HOWEVER THESE THESE DRAWINGS SHOULD BE USED IN CONJUNCTION WITH MBCI'S IMP INSTALLATION MANUAL, HOWEVER THESE ERECTION DRAWINGS SHALL TAKE PRECEDENCE OVER ANY DISCREPANCIES BETWEEN THE DRAWINGS AND THE MANUAL. 7. AT IMP PANELS TO PROVIDE CONSISTENT THERMAL VALUES AT CAVITIES SUCH AS AT CORNERS, RAKE PARAPETS OR AT IMP PANELS TO PROVIDE CONSISTENT THERMAL VALUES AT CAVITIES SUCH AS AT CORNERS, RAKE PARAPETS OR HIGH EAVE PARAPETS, FILLER INSULATION MUST BE INSTALLED. FIBERGLASS INSULATION (NOT SUPPLIED BY MBCI) 8. AT IMP PANELS TO SPECIFY THE APPROPRIATE VAPOR CONTROL MEASURES LOCATION OF VAPOR BARRIER SEALANTS AT IMP PANELS TO SPECIFY THE APPROPRIATE VAPOR CONTROL MEASURES LOCATION OF VAPOR BARRIER SEALANTS MUST BE ADDRESSED BY A DESIGN PROFESSIONAL. 9. IF BACK-FASTENERS ARE REQUIRED, RIVET GUNS ARE AVAILABLE FOR RENT FROM DYNAMIC FASTENERS. IF BACK-FASTENERS ARE REQUIRED, RIVET GUNS ARE AVAILABLE FOR RENT FROM DYNAMIC FASTENERS. 10. PBU PANELS DO NOT ALLOW FOR THERMAL EXPANSION-CONTRACTION. PANELS ARE ATTACHED DIRECTLY TO THE PBU PANELS DO NOT ALLOW FOR THERMAL EXPANSION-CONTRACTION. PANELS ARE ATTACHED DIRECTLY TO THE SUBSTRUCTURE WITHOUT CLIPS. 11. TAPE SEALER NOT REQUIRED AT THE PBU PANEL SIDE LAPSTAPE SEALER NOT REQUIRED AT THE PBU PANEL SIDE LAPS

AutoCAD SHX Text

PANEL NOTES

AutoCAD SHX Text

PANELS TO BE

AutoCAD SHX Text

EXTERIOR SKIN GA. TO BE

AutoCAD SHX Text

EXTERIOR SKIN FINISH TO BE

AutoCAD SHX Text

INTERIOR SKIN GA TO BE

AutoCAD SHX Text

INTERIOR SKIN FINISH TO BE

AutoCAD SHX Text

THE PANEL THICKNESS IS TO BE

AutoCAD SHX Text

EXTERIOR SKIN COLOR TO BE

AutoCAD SHX Text

INTERIOR SKIN COLOR TO BE

AutoCAD SHX Text

EXTERIOR SKIN TEXTURE TO BE

AutoCAD SHX Text

INTERIOR SKIN TEXTURE TO BE

AutoCAD SHX Text

ROOF

AutoCAD SHX Text 36"

AutoCAD SHX Text

IBL

AutoCAD SHX Text

AutoCAD SHX Text

SIGNATURE 300

AutoCAD SHX Text

AutoCAD SHX Text

MESA

AutoCAD SHX Text

%%USTANDARD

AutoCAD SHX Text

%%USTANDARD

AutoCAD SHX Text

NON EMBOSSED

AutoCAD SHX Text

STUCCO EMBOSSED

AutoCAD SHX Text

PANELS TO BE

AutoCAD SHX Text

EXTERIOR SKIN GA. TO BE

AutoCAD SHX Text

EXTERIOR SKIN FINISH TO BE

AutoCAD SHX Text

INTERIOR SKIN GA TO BE

AutoCAD SHX Text

INTERIOR SKIN FINISH TO BE

AutoCAD SHX Text

THE PANEL THICKNESS IS TO BE

AutoCAD SHX Text

EXTERIOR SKIN COLOR TO BE

AutoCAD SHX Text

INTERIOR SKIN COLOR TO BE

AutoCAD SHX Text

EXTERIOR SKIN TEXTURE TO BE

AutoCAD SHX Text

INTERIOR SKIN TEXTURE TO BE

AutoCAD SHX Text

WALL

AutoCAD SHX Text 36"

AutoCAD SHX Text

TUFF-WALL

AutoCAD SHX Text

AutoCAD SHX Text

TUFF WALL

AutoCAD SHX Text

AutoCAD SHX Text

LIGHT MESA

AutoCAD SHX Text 2"

AutoCAD SHX Text

%%USTANDARD

AutoCAD SHX Text

%%UIGLOO WHITE

AutoCAD SHX Text

TEXTURED

AutoCAD SHX Text

STUCCO EMBOSSED

AutoCAD SHX Text

SEAM SPACING TO BE

AutoCAD SHX Text O.C.

AutoCAD SHX Text

ATTACHMENT TO BE

AutoCAD SHX Text

FINISH TO BE

AutoCAD SHX Text

COLOR =

AutoCAD SHX Text

PANELS TO BE

AutoCAD SHX Text

PANEL TO BE: GAGE

AutoCAD SHX Text 36"

AutoCAD SHX Text

AT EACH FRAMING MEMBER

AutoCAD SHX Text

SMOOTH

AutoCAD SHX Text

SIGNATURE 200

AutoCAD SHX Text

%%UWHITE

AutoCAD SHX Text

WALL

AutoCAD SHX Text

PBU

AutoCAD SHX Text

AutoCAD SHX Text

FOR ADDITIONAL ERECTION INFORMATION

AutoCAD SHX Text

PLEASE REFER TO MBCI'S

AutoCAD SHX Text

DESIGN/INSTALLATION MANUAL

AutoCAD SHX Text

IBL INSULATED METAL PANELS

AutoCAD SHX Text

FOR ADDITIONAL ERECTION INFORMATION

AutoCAD SHX Text

PLEASE REFER TO MBCI'S

AutoCAD SHX Text

DESIGN/INSTALLATION MANUAL

AutoCAD SHX Text

CONCEALED FASTENER IMP WALL PANELS

AutoCAD SHX Text

FOR ADDITIONAL ERECTION INFORMATION

AutoCAD SHX Text

PLEASE REFER TO MBCI'S

AutoCAD SHX Text

DESIGN/INSTALLATION MANUAL

AutoCAD SHX Text

PBR & PBU PANELS

AutoCAD SHX Text

EXPOSED TRIM GAUGE AND FINISH TO MATCH

AutoCAD SHX Text

RELATED PANELS. TRIM COLORS TO BE LISTED

AutoCAD SHX Text

ON SHEET T1. CONCEALED TRIM MAY BE

AutoCAD SHX Text

ASSORTED COLORS.

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

B. MARK ALL CHANGES OR CORRECTIONS IN RED INK ON PRINTS AND RETURN ONE

AutoCAD SHX Text

SET TO MBCI FOR CORRECTION AND FABRICATION.

AutoCAD SHX Text

C. MBCI'S APPROVAL STAMP MUST BE SIGNED BEFORE FABRICATION CAN BEGIN.

AutoCAD SHX Text

D. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF THE APPROVAL STAMP IS SIGNED AND

AutoCAD SHX Text

CHANGES ARE NOT NOTED ON THE PRINTS.

AutoCAD SHX Text

A. CONTRACTOR TO VERIFY ALL BUILDING DIMENSIONS, DETAILS, SECTIONS, AND TRIM

AutoCAD SHX Text

CONDITIONS PRIOR TO FABRICATION.

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E1 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text

%%UINSULATED BATTENLOK PANEL PROFILE

AutoCAD SHX Text

SHEETING DIRECTION

AutoCAD SHX Text %%u CROSS SECTION

AutoCAD SHX Text %%u AFTER SEAMING

AutoCAD SHX Text %%u BEFORE SEAMING

AutoCAD SHX Text %%u CROSS SECTION

AutoCAD SHX Text

(UNDERSIDE OF CLIP TAB)

AutoCAD SHX Text

(CONTINUOUS)

AutoCAD SHX Text

CLIP TAPE SEALANT

AutoCAD SHX Text

[7412] (FIELD APPLIED)

AutoCAD SHX Text

(2) PER CLIP

AutoCAD SHX Text

1/4"-14 X 2" HWH W/O W

AutoCAD SHX Text

TEK-3 [FASTENER #1616]

AutoCAD SHX Text

SEAM TAPE SEALANT

AutoCAD SHX Text

[7406] (FIELD APPLIED)

AutoCAD SHX Text

NON-SKINNING BUTYL TUBE

AutoCAD SHX Text

[7100] (FIELD APPLIED)

AutoCAD SHX Text

PROFILE (1)

AutoCAD SHX Text

%%U TUFF WALL PANEL PROFILE

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

INTERIOR

AutoCAD SHX Text

%%U PANEL JOINT DETAIL

AutoCAD SHX Text

SHEETING DIRECTION

AutoCAD SHX Text

NON-SKINNING BUTYL TUBE

AutoCAD SHX Text

(FACTORY APPLIED)

AutoCAD SHX Text

PANEL CLIP

AutoCAD SHX Text [4633]

AutoCAD SHX Text

(2) PER CLIP

AutoCAD SHX Text

1/4-28-4 TEK 5 HEX WASHER HEAD

AutoCAD SHX Text

FASTENER [#1732]

AutoCAD SHX Text

%%U PBU PANEL SIDE LAP DETAIL

AutoCAD SHX Text

%%U PBU PANEL FASTENER LOCATION

AutoCAD SHX Text

(AT INTERMEDIATE SUPPORTS)

AutoCAD SHX Text

%%U PBU PANEL FASTENER LOCATION

AutoCAD SHX Text

(AT PANEL ENDS)

AutoCAD SHX Text

APPLICATION

AutoCAD SHX Text

PREVAILING WIND

AutoCAD SHX Text

(3) PER PANEL PER SUPPORT

AutoCAD SHX Text

#12-14 X 1 1/4" HH LL W/W

AutoCAD SHX Text

TEK-3 [FASTENER #3]

AutoCAD SHX Text @ 20" O.C.

AutoCAD SHX Text

1/4"-14 X 7/8" HH LL W/W

AutoCAD SHX Text

LAP-TEK [FASTENER #4]

AutoCAD SHX Text

(6) PER PANEL END

AutoCAD SHX Text

#12-14 X 1 1/4" HH LL W/W

AutoCAD SHX Text

TEK-3 [FASTENER #3]

AutoCAD SHX Text

PROFILE (3)

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text 1"

AutoCAD SHX Text

%%UARTISAN L12 PANEL PROFILE

AutoCAD SHX Text

%%UPANEL SIDELAP

AutoCAD SHX Text 8 x 5/8 NIBBED DRILLER

AutoCAD SHX Text

[FASTENER #24]

AutoCAD SHX Text

@ 24" O.C. MAX.

AutoCAD SHX Text 1/4-14 x 7/8 LAPTEK W/WASHER

AutoCAD SHX Text

[FASTENER #4A]

AutoCAD SHX Text

@ 24" O.C. MAX.

AutoCAD SHX Text

FOR PANELS OVER 4'-0" LONG

AutoCAD SHX Text

(1) @ MID-SPAN FOR PANELS 4'-0"

AutoCAD SHX Text

LONG OR LESS

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E2 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

%%UROOF PURLIN LAYOUT @ WA-A1

AutoCAD SHX Text

A. DUE TO LACK OF INFORMATION, ALL BUILDING DIMENSIONS, DETAILS, SECTIONS,

AutoCAD SHX Text

AND TRIM MUST BE VERIFIED BY CONTRACTOR PRIOR TO FABRICATION.

AutoCAD SHX Text

PRINTS.

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF NO CHANGES ARE NOTED ON THE

AutoCAD SHX Text

B. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

MATCHLINE

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text

AutoCAD SHX Text 1B

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD1

AutoCAD SHX Text 1B

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD1

AutoCAD SHX Text 3A

AutoCAD SHX Text

FD2

AutoCAD SHX Text 3A

AutoCAD SHX Text

FD2

AutoCAD SHX Text

AutoCAD SHX Text

FD2

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E3 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text Z

AutoCAD SHX Text

A. DUE TO LACK OF INFORMATION, ALL BUILDING DIMENSIONS, DETAILS, SECTIONS,

AutoCAD SHX Text

AND TRIM MUST BE VERIFIED BY CONTRACTOR PRIOR TO FABRICATION.

AutoCAD SHX Text

PRINTS.

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF NO CHANGES ARE NOTED ON THE

AutoCAD SHX Text

B. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

MATCHLINE

AutoCAD SHX Text

%%UROOF PURLIN LAYOUT @ WA-A2

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 3:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 1B

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD1

AutoCAD SHX Text 1B

AutoCAD SHX Text

FD1

AutoCAD SHX Text 1A

AutoCAD SHX Text

FD1

AutoCAD SHX Text 2A

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD2

AutoCAD SHX Text

AutoCAD SHX Text

FD2

AutoCAD SHX Text 2A

AutoCAD SHX Text

FD1

AutoCAD SHX Text

AutoCAD SHX Text

FD2

AutoCAD SHX Text 5A

AutoCAD SHX Text

FD2

AutoCAD SHX Text

AutoCAD SHX Text

FD2

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E4 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

%%UROOF BRIDGING LAYOUT @ WA-A1

AutoCAD SHX Text

A. DUE TO LACK OF INFORMATION, ALL BUILDING DIMENSIONS, DETAILS, SECTIONS,

AutoCAD SHX Text

AND TRIM MUST BE VERIFIED BY CONTRACTOR PRIOR TO FABRICATION.

AutoCAD SHX Text

PRINTS.

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF NO CHANGES ARE NOTED ON THE

AutoCAD SHX Text

B. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

MATCHLINE

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD2

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E5 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text Z

AutoCAD SHX Text

A. DUE TO LACK OF INFORMATION, ALL BUILDING DIMENSIONS, DETAILS, SECTIONS,

AutoCAD SHX Text

AND TRIM MUST BE VERIFIED BY CONTRACTOR PRIOR TO FABRICATION.

AutoCAD SHX Text

PRINTS.

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF NO CHANGES ARE NOTED ON THE

AutoCAD SHX Text

B. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text

MATCHLINE

AutoCAD SHX Text

%%UROOF BRIDGING LAYOUT @ WA-A2

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text 3:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text 9A

AutoCAD SHX Text

FD3

AutoCAD SHX Text

AutoCAD SHX Text

FD3

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E6 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

CROSS SECTION

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

CROSS SECTION

AutoCAD SHX Text

A. DUE TO LACK OF INFORMATION, ALL BUILDING DIMENSIONS, DETAILS, SECTIONS,

AutoCAD SHX Text

AND TRIM MUST BE VERIFIED BY CONTRACTOR PRIOR TO FABRICATION.

AutoCAD SHX Text

PRINTS.

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF NO CHANGES ARE NOTED ON THE

AutoCAD SHX Text

B. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

PROJECT NAME & LOCATION:

AutoCAD SHX Text

CUSTOMER:

AutoCAD SHX Text Proj. Number:

AutoCAD SHX Text Sheet Number:

AutoCAD SHX Text Checked by:

AutoCAD SHX Text For Approval

AutoCAD SHX Text For Construction

AutoCAD SHX Text For Permit

AutoCAD SHX Text Drawn by:

AutoCAD SHX Text Date

AutoCAD SHX Text Revison

AutoCAD SHX Text Description

AutoCAD SHX Text By

AutoCAD SHX Text Ck'd

AutoCAD SHX Text Scale:

AutoCAD SHX Text Drawing Status:

AutoCAD SHX Text Project Engineer:

AutoCAD SHX Text Preliminary

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text E7 of 39

AutoCAD SHX Text

ARCHITECT:

AutoCAD SHX Text Dyess AFB Repair Maintenance Shop Abilene , TX

AutoCAD SHX Text 01-1875-17

AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

AutoCAD SHX Text

HOUSTON, TEXAS 77060

AutoCAD SHX Text 281/445-8555

AutoCAD SHX Text

14031 WEST HARDY

The engineer whose seal appears hereon is an employee for the manufacturer for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only.The undersigned engineer is not the overall engineer of record for this project.

M et al R oo f a nd W al l S ys te m s b

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text %%uATTENTION INSTALLER!

AutoCAD SHX Text

%%UMBCI WILL NOT HONOR BACKCHARGES.

AutoCAD SHX Text

PROJECT OR THESE CONSTRUCTION DRAWINGS

AutoCAD SHX Text

ARISES WITH MATERIALS SHIPPED FOR THIS

AutoCAD SHX Text

IN THE EVENT THAT A DISCREPANCY OR ERROR

AutoCAD SHX Text

BY ANY PARTY INVOLVED!!!

AutoCAD SHX Text

THE INSTALLER MUST NOTIFY MBCI PRIOR

AutoCAD SHX Text

TO CORRECTING, IF MBCI IS NOT NOTIFIED,

AutoCAD SHX Text

APPROVED APPROVED AS NOTED

AutoCAD SHX Text

REVISE AND RESUBMIT

AutoCAD SHX Text

BY:%%U %%U

AutoCAD SHX Text

DATE:%%U %%U

AutoCAD SHX Text

AUTHORIZED REPRESENTATIVE / BUYER

AutoCAD SHX Text THIS STAMP MUST BE SIGNED BY AN AUTHORIZED REPRESENTATIVE OR BUYER BEFORE RETURNING TO MBCI. THESE DRAWINGS ARE SUBMITTED FOR AND REQUIRE BUYER’S APPROVAL. S APPROVAL. CHANGES OR VERIFICATIONS MUST BE NOTED AND RETURNED TO MBCI BY AN OFFICER OR AUTHORIZED REPRESENTATIVE OF BUYER’S COMPANY BEFORE S COMPANY BEFORE FABRICATION CAN PROCEED. DRAWINGS MAY VARY FROM PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER AND SUCH DIFFERENCES / VARIANCES ARE MADE IN ORDER TO CONFORM TO MBCI’S OR S OR INDUSTRY STANDARDS. IT IS THE BUYER’S SOLE RESPONSIBILITY TO VERIFY S SOLE RESPONSIBILITY TO VERIFY ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS. BUYER’S S SIGNATURE BELOW CERTIFIES THAT ALL DIMENSIONS, QUANTITIES, LENGTHS, FINISHES AND MATERIALS HAVE BEEN VERIFIED, ARE CORRECT AND ARE APPROVED OR APPROVED AS NOTED. THESE DRAWINGS DO NOT RELIEVE BUYER OF ITS OBLIGATIONS IN CONNECTION WITH THE CONTRACT DOCUMENTS AND ARE SOLELY OUR INTERPRETATION OF THE PROJECT DRAWINGS, SPECIFICATIONS OR DOCUMENTS PROVIDED BY BUYER.

AutoCAD SHX Text

FOR APPROVAL PURPOSES ONLY

AutoCAD SHX Text

NOT FOR CONSTRUCTION

AutoCAD SHX Text

FIELD MITER TRIM AS REQUIRED AT CORNERS (TYP.)

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

%%UROOF PANEL LAYOUT @ WA-A1

AutoCAD SHX Text

A. DUE TO LACK OF INFORMATION, ALL BUILDING DIMENSIONS, DETAILS, SECTIONS,

AutoCAD SHX Text

AND TRIM MUST BE VERIFIED BY CONTRACTOR PRIOR TO FABRICATION.

AutoCAD SHX Text

PRINTS.

AutoCAD SHX Text

DRAWINGS WILL BE ASSUMED CORRECT IF NO CHANGES ARE NOTED ON THE

AutoCAD SHX Text

B. DIMENSIONS, TRIM CONDITIONS OR OTHER INFORMATION INDICATED ON THESE

AutoCAD SHX Text

%%UCONTRACTOR NOTES:

AutoCAD SHX Text

MATCHLINE

AutoCAD SHX Text

%%UKEY PLAN

AutoCAD SHX Text 4:12

AutoCAD SHX Text 4:12

AutoCAD SHX Text

ROOF PANEL TO BE: 36" IBL

AutoCAD SHX Text A

AutoCAD SHX Text D1

AutoCAD SHX Text A

AutoCAD SHX Text D1

AutoCAD SHX Text B

AutoCAD SHX Text D1

AutoCAD…