ELMS EE-T101-EE-T101.pdf

PDF 224 KB Posted

Attached to
2025 E-Rate Network Cabling Additions
Solicitation number
RFP-SCC-250000001194-3
Issued by
Genesee County, Michigan

About this file

This is a technology design drawing for structured cabling at Elms Elementary School in the Swartz Creek Community Schools district, created by Convergent Technology Partners. The drawing details specifications for Category 6A UTP cable installation throughout the school building, including wall and ceiling mount locations. The design was created in January 2024 and includes a detailed floor plan showing cable drop locations, telecom cabinets, and bus-bar placements.

The technical specifications require all UTP cable to be ANSI/TIA Category 6A standard, with wall locations using surface-mounted single-gang back boxes with white two-port faceplates. Ceiling locations must include service loops long enough to reach the farthest location in associated rooms. All cabling below ceiling must be concealed in contractor-provided raceway, and all Category 6A cables must terminate on white 8P/8C (RJ45) jacks. The drawing also specifies that all cabinets require grounding, and unused faceplate ports must be filled with blank keystone jack inserts. The installation height requirements are standardized, with wall locations centered below whiteboards or centered on walls without whiteboards at standard height.

View the file

Other files

Show all 19

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

1 1

1 11 11 11 11 11 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

1 1

TGB

SYMBOL LEGEND

UTP LOCATION, QTY AS

NOTED

CEILING UTP LOCATION,

QTY AS NOTED

TELECOM CABINET

TELECOM BUS-BAR

LOW VOLTAGE SLEEVE

REPLACE CABINETR

GENERAL NOTES

1. ALL UTP CABLE SHALL BE ANSI/TIA

CATEGORY 6A. PLACE WALL

LOCATIONS IN A SURFACE MOUNTED

SINGLE-GANG BACK BOX WITH A

WHITE TWO PORT FACEPLATE.

2. THE UNUSED TOP PORT OF THE

FACEPLATE IS TO BE FILLED WITH A

BLANK KEYSTONE JACK INSERT.

3. PLACE WALL LOCATIONS CENTERED

BELOW WHITEBOARD AT STANDARD

HEIGHT.

4. LOCATIONS WITHOUT WHITEBOARDS,

CENTER THE INSTALLATION ON THE

WALL AT STANDARD HEIGHT.

5. ALL CABLE BELOW CEILING SHALL BE

CONCEALED IN RACEWAY PROVIDED

BY CONTRACTOR.

6. PROVIDE CEILING LOCATION WITH

SERVICE LOOP LONG ENOUGH TO

REACH THE FARTHEST LOCATION IN

THE ASSOCIATED ROOM. SECURELY

FASTEN SERVICE LOOP TO

STRUCTURE.

7. TERMINATE ALL CATEGORY 6A CABLES

ON WHITE 8P/8C (RJ45) JACKS.

8. LOCATION OF BUS BLOCKS ARE

ESTIMATED, USE BEST PRACTICES

FOR INSTALLATION LOCATION.

9. FOR ESTIMATES ASSUME ALL

CABINETS NEED GROUNDING.

C O N V E R G E N T 6197 Miller Road Suite 4 Swartz Creek, MI 48473

Phone: 810.720.3820 www.ctpartners.net

T E C H N O L O G Y P A R T N E R S

TECHNOLOGY DESIGN I CONSULTING I PLANNING

1/23/0225 DESIGN DLF

1/17/2024 DESIGN EGH

DATE ISSUE AUTHOR

SWARTZ CREEK

COMMUNITY SCHOOLS

STRUCTURED CABLING

EE-T101

ELMS ELEMENTARY

SCHOOLT101

NTS

ELMS FLOOR PLAN

Sheets and Views
EE-T101

File details come from the government source that posted it. Updated .