CDRLs A108 thru A127 15 May 2020.pdf

5/15/2020 7:28:04 AM CDT CDRL Table of Contents

CONTRACT #:

CONTRACTOR:

SET NAME: B-52 CERP/Engine SS SYSTEM ITEM: B-52 Commercial Engine Replacement Program

PROGRAM: B-52 CERP

DATA ITEM REQUIRING OFFICE AUTHORITY/TITLE/SUBTITLE SOW PARAGRAPH

A108 AFLCMC/WWDC DI-MSSM-81751 BLK16

Department of Defense (DOD) Modeling and Simulation (M&S) Verification and Validation Plan

CERP Engine Department of Defense (DOD) Modeling and SimuIation V&V Plan

A109 AFLCMC/WWDC DI-MSSM-81752 BLK16

Department Of Defense (DOD) Modeling and Simulation(M&S) Verification and Validation (V&V) Report

CERP Engine Department of Defense (DOD) Modeling and Simulation (M&S) V&V Report

A110 AFLCMC/WWDC DI-MISC-80508B/T BLK16

Technical Report-Study/Services

Analytical Condition Inspection (ACI) Teardown Plan

A111 AFLCMC/WWDC DI-MISC-81391A BLK16

Analytical Condition Inspection (ACI) Report

A112 AFLCMC/WWDC DI-NDTI-80566A/T BLK16

Test Plan

Accelerated Mission Test (AMT) Plan

A113 AFLCMC/WWDC DI-MISC-80508B/T BLK16

Technical Report-Study/Services

Accelerated Mission Test (AMT) Report

A114 AFLCMC/WWDC DI-MISC-80508B/T BLK16

Technical Report-Study/Services

Workscope Report

A116 AFLCMC/WWDC DI-MGMT-80004A/T BLK16

Management Plan

Depot-Level Spares

A117 AFLCMC/WWDC DI-MISC-80508B/T BLK16

Technical Report-Study/Services

LHI Checklist Questionnaire

A118 AFLCMC/WWDC DI-SESS-81758A/T BLK16

Logistics Product Data

Provisioning Technical Documentation

5/15/2020 7:28:04 AM CDT CDRL Table of Contents

A119 AFLCMC/WWDC DI-SESS-81874/T BLK16

Engineering Data for Provisioning (EDFP)

A120 AFLCMC/LPA DI-SESS-80643D SOW Paragraph 4.5.5

Specification Change Notice (SCN)

A121 AFLCMC/WWDC DI-SESS-81003F BLK16

Commercial Engineering Design Data & Associated Lists

Commercial Tech Data Package (TDP) Form, Fit, Function

A122 AFLCMC/LPA DI-MISC-80508B SOW PARA 4.14.4

Technical Report-Study/Services

Cyber Incidents

A123 AFLCMC/LPA DI-MISC-80508B SOW PARA 4.14.1

Technical Report-Study/Services

Vulnerability Assessment Plan

A124 AFLCMC/LPA DI-MISC-80508B/T SOW Paragraph 4.14.1

Technical Report-Study/Services

Vulnerability Assessment Report

A125 AFLCMC/LPA DI-MISC-80508B/T SOW Paragraph 4.14.5

Technical Report-Study/Services

Criticality Analysis

A126 AFLCMC/LPA DI-MISC-80508B SOW Paragraph 4.14.6

Technical Report-Study/Services

Architecture Design Document

A127 AFLCMC/LPA DI-ADMN-81373/T BLK 16

Presentation Material

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX21

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MSSM

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A108

2. TITLE OF DATA ITEM

Department of Defense (DOD) Modeling and Simulation (M&S) Verification and Validation Plan

3. SUBTITLE

CERP Engine Department of Defense (DOD) Modeling and SimuIation V&V Plan

4. AUTHORITY (Data Acquisition Document No.)

DI-MSSM-81751

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 5: The contract reference is stated in paragraph 4.4.5.1

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The contractor shall submit the data NLT 14 days prior to final submission of any engineering studies performed under this contract.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be 14 days prior to final submission of any engineering studies performed under this contract.

Block 13: The date of subsequent submission shall be 14 days prior to final submission of any engineering studies performed under this contract.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

Contract Nr:

Mod#:

Exhibit:

Appendix B

18. ESTIMATED

TOTAL PRICE

17. PRICE GROUP

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 2 Pages

A. CONTRACT LINE ITEM NO.

XX21

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MSSM

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO.

F. CONTRACTOR

16. REMARKS (Continued) Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Contract Nr:

Exhibit:

DATA ITEM DESCRIPTION

Title: DEPARTMENT OF DEFENSE (DOD) MODELING AND SIMULATION

(M&S) VERIFICATION AND VALIDATION (V&V) PLAN

Number: DI-MSSM-81751 Approval Date: 20080207 AMSC Number: D9026 Limitation: None DTIC Applicable: No GIDEP Applicable: No Preparing Activity: OSD-DMS Applicable Forms: N/A Use/Relationship: Application of standard templates within the Modeling and Simulation (M&S) Verification, Validation, and Accreditation (VV&A) processes will provide consistent documentation that minimizes redundancy and maximizes reuse of information. It will promote a common framework and interfacing capability that can be shared across all M&S programs within the Department of Defense, other government agencies, and Allied Nations.

This Data Item Description contains the content and format preparation instructions for documenting M&S verification and validation (V&V) planning for model(s), simulation(s), federations of models and simulations, and other types of distributed simulations, which are described in MIL-STD-3022, Documentation of Verification, Validation, and Accreditation (VV&A) for Models and Simulations.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their dates and dates of any applicable notices and revisions, shall be as specified in the contract.

2. Format and Content. The format and content of the Verification and Validation (V&V) Plan shall be in accordance with MIL-STD-3022, Appendix B.

END OF DI-MSSM-81751

Source: http://assist.dla.mil -- Downloaded: 2020-01-13T20:07Z Check the source to verify that this is the current version before use.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX21

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MSSM

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A109

2. TITLE OF DATA ITEM

Department Of Defense (DOD) Modeling and Simulation(M&S) Verification and Validation (V&V) Report

3. SUBTITLE

CERP Engine Department of Defense (DOD) Modeling and Simulation (M&S) V&V Report

4. AUTHORITY (Data Acquisition Document No.)

DI-MSSM-81752

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 5: The contract reference is stated in SOW paragraph 4.4.5.1

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The contractor shall submit the data NLT 14 days prior to final submission of any engineering studies performed under this contract.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be 14 days prior to final submission of any engineering studies performed under this contract.

Block 13: The date of subsequent submission shall be 14 days prior to final submission of any engineering studies performed under this contract.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO.

XX21

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MSSM

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement

Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Contract Nr:

Exhibit:

Title: DEPARTMENT OF DEFENSE (DOD) MODELING AND SIMULATION

(M&S) VERIFICATION AND VALIDATION (V&V) REPORT

Number: DI-MSSM-81752 Approval Date: 20080207 AMSC Number: D9027 Limitation: None DTIC Applicable: No GIDEP Applicable: No Preparing Activity: OSD-DMS Applicable Forms: N/A Use/Relationship: Application of standard templates within the Modeling and Simulation (M&S) Verification, Validation, and Accreditation (VV&A) processes will provide consistent documentation that minimizes redundancy and maximizes reuse of information. It will promote a common framework and interfacing capability that can be shared across all M&S programs within the Department of Defense, other government agencies, and Allied Nations.

This Data Item Description contains the content and format preparation instructions for documenting M&S verification and validation (V&V) reporting for model(s), simulation(s), federations of models and simulations, and other types of distributed simulations, which are described in MIL-STD-3022, Documentation of Verification, Validation, and Accreditation (VV&A) for Models and Simulations

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their dates and dates of any applicable notices and revisions, shall be as specified in the contract.

2. Format and Content. The format and content of the Verification and Validation (V&V) Report shall be in accordance with MIL-STD-3022, Appendix C.

END OF DI-MSSM-81752

Source: http://assist.dla.mil -- Downloaded: 2020-01-13T20:03Z

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX31

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A110

2. TITLE OF DATA ITEM

Technical Report-Study/Services

3. SUBTITLE

Analytical Condition Inspection (ACI) Teardown Plan

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80508B/T

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 4: This DID is tailored as follows: Delete Section 3(d).

Block 5: The contract reference is stated in SOW paragraph 4.4.6.1.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The contractor shall submit the data as requested.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be as requested.

Block 13: The date of subsequent submission shall be as requested.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO.

XX31

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Exhibit:

Title: Technical Report–Study/Services

Number: DI-MISC-80508B Approval Date: 14 Nov 2006 AMSC Number: 7633 Limitation: N/A DTIC Applicable: Yes Defense Technical Information Center (DTIC), 8725 John J. Kingman Rd.

Suite. 0944, Fort Belvoir, VA 22060-6218 GIDEP Applicable: No Office of Primary Responsibility: NS/DA02 Applicable Forms: N/A

Use/relationship: A technical report provides fully documented results of studies or analysis performed.

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID supersede DI-MISC-80508A

Requirements:

1. Reference documents. None.

2. Format.

(a) The report and all attachments shall be typewritten, or otherwise clearly lettered, and shall be duplicated using non-fading ink.

(b) Text shall be prepared on standard letter size paper (8 ½ x 11”) .

(c) When attachments are included, they shall be fully identified, referenced in the text, and folded to conform to the size paper used in the report.

(d) Security classification and distribution markings shall conform to the requirements of the contract, purchase description and security requirements checklist, as applicable.

Source: http://assist.dla.mil -- Downloaded: 2019-03-15T19:38Z

DI-MISC-80508B

3. Contents.

(a) Title Page – Identifies the report by providing contract number, project name or purchase description title, task number, and reporting period.

(b) Table of Contents.

(c) Section I – Includes the following:

(1) Introduction

(2) Summary – A brief statement of results obtained for the analytic effort.

(3) Conclusions and their condensed technical substantiation’s.

(d) Section II – A complete and detailed description of the analytic results which led to the conclusions stated in Section I above.

4. END OF DI-MISC-80508B

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX31

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A111

2. TITLE OF DATA ITEM

Analytical Condition Inspection (ACI) Report

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-81391A

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 5: The contract reference is stated in SOW paragraph 4.4.6.3

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The contractor shall submit the data if an Analytical Condition Inspection (ACI) is performed.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be as requested.

Block 13: The date of subsequent submission shall be as requested.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO.

XX31

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Contract Nr:

Exhibit:

Title: ANALYTICAL CONDITION INSPECTION (ACI) REPORT

Number: DI-MISC-81391A Approval Date: 20180326 AMSC Number: F9914 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 11 (AFLCMC/EZFS) Project Number: MISC-2018-008 Applicable Forms: N/A Use/Relationship: The Analytical Condition Inspection (ACI) Report will be used to reveal damage (flaw, defect, crack, corrosion, disbond, delamination, discontinuity, or other type that degrades or has the potential to degrade the performance of the affected component) that may not otherwise be detected through normal technical order (TO) and programmed depot maintenance (PDM) inspections and to provide data for engineering and technical evaluations of the relative condition of the mission, design and series (MDS) aircraft. Data generated through ACI Reports is used to refine mandatory aircraft inspection programs (field and depot).

This DID contains the format, content and intended use information for the data deliverable resulting from the technical requirements described in Task V of MIL-STD-1530, Aircraft Structural Integrity Program (ASIP), and Subtask 3 of MIL-STD-1798, Mechanical Equipment and Subsystems Integrity Program.

(Copies of these documents are available online at http://quicksearch.dla.mil.)

Requirements:

1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. The ACI Report shall be in the contractor’s format.

3. Content. The ACI Report shall include the following information:

3.1 ACI Work Instructions - for each inspection/inspection location:

a. Identification number.

b. Part name/description of article to be inspected.

c. Part number(s).

d. Part criticality – safety or fracture critical, durability or maintenance (Mx) critical, normal controls, etc.

e. Area/location of inspection.

f. Reason for inspection.

DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Source: http://assist.dla.mil -- Downloaded: 2019-07-15T21:34Z http://quicksearch.dla.mil/

DI-MISC-81391A

g. Frequency of inspection.

h. Type of inspection.

i. Instructions for accessing article to be inspected.

j. Inspection procedures and potential/anticipated damage.

3.2 ACI Inspection Results:

a. Pertinent aircraft identifying information:

(1) Aircraft mission design series (MDS).

(2) Aircraft serial number (SN).

(3) Base assignment history.

(4) Planned ACI start and end date.

(5) Actual ACI start and end date.

(6) Actual flight hours.

(7) Equivalent flight hours.

(8) Last programmed depot Mx date.

b. Information for each inspection location:

(1) ACI work instruction identification number.

(2) Date of inspection.

(3) Description of inspected article condition.

(4) If damage found, damage classification (minor, major, or critical):

(a) Detailed description, sketches, drawings, and photographs documenting damage, for damage types, sizes, locations, and orientations.

(b) Part number and criticality classification.

(c) Work Unit Code for item with defect.

(d) How malfunction codes/root cause determination.

(e) Engineering and nondestructive inspection records.

(f) Action taken code/damage disposition (no action required, repair, replace, etc.)

with documentation.

(5) Record of inspection:

(a) Date and time of inspection.

(b) Name and organization of inspector.

(c) Location of inspection (e.g., RAFB (Robins Air Force Base), HAFB (Hill Air Force Base), TAFB (Tinker Air Force Base), location of contractor facility, etc.).

c. Summary of results and recommendations.

(1) Summary of inspection findings.

DI-MISC-81391A

(2) Prioritized list of critical and major findings.

(3) Recommendations for revisions to maintenance requirements at the depot and/or field levels.

End of DI-MISC-81391A.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX32

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER NDTI

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A112

2. TITLE OF DATA ITEM

Test Plan

3. SUBTITLE

Accelerated Mission Test (AMT) Plan

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-80566A/T

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 4: This DID is tailored as follows: 3. Contractor format is acceptable using SOW Attachment J, Accelerated Mission Test Plan.

Block 5: The contract reference is stated in SOW paragraph 4.4.7.1

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The Contractor shall submit the data when directed by the Government.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be NLT 30 calendar days following Government request.

Block 13: The date of subsequent submission shall be NLT 15 calendar days following Government request for revision.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO.

XX32

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER NDTI

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement

Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Contract Nr:

Exhibit:

Title: Test Plan

Number: DI-NDTI-80566A Approval Date: 14 Nov 2006 AMSC Number: 7639 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/DA02 Applicable Forms: N/A

Use/relationship: The Test Plan outlines the plans and performance objectives at every level of testing on systems or equipment. It provides the procuring activity with the test concept, objectives and requirements to be satisfied, test methods, elements, responsible activities associated with the testing, measures required and recording procedures to be used.

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID is applicable to system and equipment tests that include design evaluation tests, engineering tests, preliminary qualification tests, formal qualification tests, human factors tests, operational tests and acceptance tests.

This DID supersede DI-NDTI-80566.

Requirements:

1. Reference documents. None.

2. General. The test plan shall document in detail the contractor’s plan for conducting tests and analyzing the test results to show how the system, when fielded, will satisfy the requirements of the applicable design specification.

3. Format: The plan shall be in contractor’s format.

4. Contents. The plan shall contain the following:

4.1 Title page. The title page shall include the following:

a. Title of the test to be conducted.

b. Identification of system being tested.

c. Contractor’s name.

d. Contractor number.

Source: http://assist.dla.mil -- Downloaded: 2019-03-15T19:44Z

DI-NDTI-80566A

e. Security classification.

f. Distribution statement.

4.2 Introduction. Consists of an overview of the objectives of the test plan, including flow diagrams, milestones, personnel participation, locations, schedules, and security measures to be observed. The plan shall include the following:

4.3 Flow diagrams. The flow diagrams will reflect a functional description of the test program using a block diagram portrayal of the functions that must be met to satisfy the total test program. Functions shall be numbered 1.0, 2.0, 3.0, etc.

4.4 Milestones. Identifies the start and expected completion dates of each test to be performed.

4.5 Participation. Identifies the government and contractor participation roles and responsibilties.

4.6 Location. Identifies the facilities where the testing will be performed.

4.7 Schedule. States when testing will be performed, whether testing is on schedule, and if not, what procedures will be taken to meet the schedule.

4.8 Security. Identify and state briefly any security measures of guidelines to be observed.

4.9 Master test list. Lists all tests to be accomplished in the order they are to be performed. A separate listing for each location shall be provided. Each listing shall include the following:

4.9.1 Test description. Name and brief description of test to be performed.

4.9.2 Applicable specification (s). The specifications shall be identified as follows:

a. Title and identification number.

b. Paragraph number associated with the tests.

c. Title of test.

d. Functional category of test.

4.9.3 Parameters. The number of cycles the test will be performed and selected parameters to be observed.

4.9.4 Special tests. Provides a list of special or unusual tests and examination necessary to verify satisfactory equipment performance to specifications.

DI-NDTI-80566A

4.9.5 Test classification category. State the functional area of each test performed.

4.9.6 Test objectives. Describes the objectives of each test performed, including the criteria, baseline, duration, and number of times each test should be performed.

a. Success/failure criteria.

b. Baseline.

c. Duration.

d. Quantity of test.

4.9.7 Test equipment. List all equipment to be used in the test and identify as follows:

a. Description.

b. Nomenclature.

c. Serial number.

4.9.8 Support equipment. List all support equipment that will be used to perform the tests and identify as follows:

a. Description.

b. Nomenclature.

c. Serial number.

d. Calibration constants.

e. Calibration procedures.

f. Operating instructions.

4.9.9 Special test equipment. List all special test equipment required to be designed or fabricated for use on the program as follows:

a. Description.

b. Nomenclature.

c. Data required.

4.9.10 Approach. Describe the steps used to perform each test.

4.9.11 Instrumentation. Indicates the type and recording devices that will be used and the number and types of parameters to be recorded.

4.9.12 Data reduction and analysis. Describes data to be recorded and the data reduction and analysis techniques that will be used to interpret the data.

4.9.13 Government test facilities. Identifies applicable facility and includes a reference to the appropriate facility requirements documents.

Validation procedure. An overview of the procedures that the contractor will use to validate the test results.

5. END OF DI-NDTI-80566A

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX32

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A113

2. TITLE OF DATA ITEM

Technical Report-Study/Services

3. SUBTITLE

Accelerated Mission Test (AMT) Report

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80508B/T

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 4: This DID is tailored as follows: Delete Section 3(d) and replace using SOW Attachment K, Accelerated Mission Test Engine Report.

Block 5: The contract reference is stated in SOW paragraph 4.4.7.3.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The contractor shall submit the data after completion of the AMT.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be NLT 15 calendar days after completion of the AMT.

Block 13: The date of subsequent submission shall be as needed to maintain currency and accuracy.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO.

XX32

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement

Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Contract Nr:

Exhibit:

Number: DI-MISC-80508B Approval Date: 14 Nov 2006 AMSC Number: 7633 Limitation: N/A DTIC Applicable: Yes Defense Technical Information Center (DTIC), 8725 John J. Kingman Rd.

Suite. 0944, Fort Belvoir, VA 22060-6218 GIDEP Applicable: No Office of Primary Responsibility: NS/DA02 Applicable Forms: N/A

Use/relationship: A technical report provides fully documented results of studies or analysis performed.

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID supersede DI-MISC-80508A

Requirements:

1. Reference documents. None.

2. Format.

(a) The report and all attachments shall be typewritten, or otherwise clearly lettered, and shall be duplicated using non-fading ink.

(b) Text shall be prepared on standard letter size paper (8 ½ x 11”) .

(c) When attachments are included, they shall be fully identified, referenced in the text, and folded to conform to the size paper used in the report.

(d) Security classification and distribution markings shall conform to the requirements purchase description title, task number, and reporting period.

(b) Table of Contents.

(c) Section I – Includes the following:

(1) Introduction

(2) Summary – A brief statement of results obtained for the analytic effort.

(3) Conclusions and their condensed technical substantiation’s.

(d) Section II – A complete and detailed description of the analytic results which led to the conclusions stated in Section I above.

4. END OF DI-MISC-80508B

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

XX21

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement Program

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

A114

2. TITLE OF DATA ITEM

Technical Report-Study/Services

3. SUBTITLE

Workscope Report

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80508B/T

5. CONTRACT REFERENCE

BLK16

6. REQUIRING OFFICE

AFLCMC/WWDC

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

BLK16

10. FREQUENCY

BLK16

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

BLK16

Draft

Final

Reg Repro

16. REMARKS

Block 4: This DID is tailored as follows: Delete Section 3(d) and replace using SOW Attachment M.

Block 5: The contract reference is stated in SOW paragraph 7.1.

Block 9: Distribution Statement D: Distribution authorized to the Department of Defense and US DOD contractors only, operational use, 6 January 2020. Other requests shall be referred to AFLCMC/WWD.

Export Control Warning Notice: Warning- This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, USC Section 2571 Et Seq) or the Export Administration Act of 1979 (Title 50, USC, App 2401 Et Seq), as amended. Violations of these export laws are subject to severe criminal penalties.

Disseminate in accordance with provisions of DOD directives 5230.25.

Destruction Notice for Unclassified Documents: Destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Destruction Notice for Classified Documents: Follow the procedures in DOD 5220.22-M, National Industry Security Program Operating Manual (NISPOM), Section 5-705, or DOD 5200.01M, Information Security Program, Volume 3, Protection of Classified Information.

Block 10: The contractor shall submit the data upon completion of inspection tasks, costing and time to return to serviceable condition calculations.

Block 11: The as of date shall be accurate as of the date of submittal.

Block 12: The date of the first submission shall be within 15 working days of receipt of the first engine/LRU at the contractor repair facility.

Block 13: The date of subsequent submission for a revised workscope shall be within 2 working days of approval by the Government.

Block 14: Deliverable shall be made to the B-52 CERP Configuration Management Office, Tinker AFB, OK. Contractors shall use the specified Configuration Management/Data Management (CM/DM) System in accordance with the Statement of Work.

Format shall be compatible with the latest Adobe Acrobat Reader version in Portable Document Format (PDF) or the latest Microsoft Office file type. The contractor shall use US DOD PKI compliant encryption mechanism when submitting sensitive but unclassified data as attachments to emails. All CDRLs will be submitted in an editable (PDF) format.

AFLCMC/WWDC 1

15. TOTAL 0 1 0

G. PREPARED BY

shepherd.debra.1044063553 Debby Shepherd

H. DATE

2020/05/14

I. APPROVED BY

crowder.celia.dyanne.1162383848

J. DATE

2020/05/14

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO.

XX21

B. EXHIBIT

Appendix B

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

B-52 Commercial Engine Replacement

Documents are to be clearly marked and NO CLASSIFIED data is ever sent or uploaded via the (CM/DM) System or normal e-mail channels.

Note: Government CDRL monitor will ensure personnel assigned to the following organizations have been granted access to MEARS or the current system the government is using: WWDC, DCMA, LPS and LPA as required.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Contract Nr:

Exhibit:

Number: DI-MISC-80508B Approval Date: 14 Nov 2006 AMSC Number: 7633 Limitation: N/A DTIC Applicable: Yes Defense Technical Information Center (DTIC), 8725 John J. Kingman Rd.

Suite. 0944, Fort Belvoir, VA 22060-6218 GIDEP Applicable: No Office of Primary Responsibility: NS/DA02 Applicable Forms: N/A

Use/relationship: A technical report provides fully documented results of studies or analysis performed.

This Data Item Description (DID) contains format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.

This DID supersede DI-MISC-80508A

Requirements:

1. Reference documents. None.

2. Format.

(a) The report and all attachments shall be typewritten, or otherwise clearly lettered, and shall be duplicated using non-fading ink.

(b) Text shall be prepared on standard letter size paper (8 ½ x 11”) .

(c) When attachments are included, they shall be fully identified, referenced in the text, and folded to conform to the size paper used in the report.

(d) Security classification and distribution markings shall conform to the requirements purchase description title, task number, and reporting period.

(b)…