Annex 1503020 Pest Control.pdf

Section C 1503020 Pest Control

1503020 – Pest Control Spec Item Title 1 General Information

1.1 Concept of Operations

2 Management and Administration

2.1 Definitions and Acronyms

2.2 Personnel

2.2.1 Certification, Training and Licensing

2.2.2 Medical Surveillance

2.3 Special Requirements

2.3.1 Business Licensing

2.3.2 Permits

2.3.3 Vehicles

2.3.4 Equipment

2.3.5 Pesticides

2.3.5.1 New Pesticide Request and Planned Pesticide Use (PPU) Sheet

2.3.5.2 Reporting

2.3.6 Disposal

2.3.7 Spills and Decontamination

2.3.8 On-Site Mixing

2.3.9 On-Site Materials Storage

2.3.10 Occupied Spaces

2.3.11 Personal Protective Equipment (PPE)

2.4 References and Technical Documents

3 Recurring Work

3.1 Scheduled Pest Control

3.1.1 Nuisance Pest Control

3.1.2 Public Health Pest Control

3.1.3 Structure Damaging Pest Control

3.1.4 Lawn, Turf and Ornamental Plant Pest Control

3.1.5 Vegetation Management

3.1.6 Vertebrate Pest Control

3.2 Pest Control Service Orders

3.2.1 Unscheduled Pest Control Services for Family Housing at NAS I (Hill Drive)

3.3 Pest Control Service Orders

3.4 Pest Management Reporting

4 Non-Recurring Work

1503020 - Pest Control Spec Item Title Description 1 General

Information

1.1 Outline of Services The Government’s integrated pest management (IPM) program is intended to emphasize surveys, establish control thresholds, and maintain documentation to track the effectiveness and safety of control efforts. IPM may include techniques such as education, habitat modification, biological control, genetic control, cultural control, mechanical control, physical control, regulatory control, and where necessary, the judicious use of least-hazardous pesticides.

Pesticides, when needed, shall be selected consistent with IPM principles in order to minimize negative impacts on human health and the environment.

The Contractor shall perform pest control services in conformance with the Integrated Pest Management Plan (IPMP) to prevent and control the following pests:

--Unwanted vegetation and invasive plants --Nuisance, structure damaging, lawn, turf and ornamental, and public health pests cockroaches termites bees wasps ants fleas silverfish stored product pests mosquitoes sandflies bedbugs weevils centipedes ticks beetles spiders

--Vertebrate pests mice rats moles snakes bats (carcass removal only) feral dogs and cats (carcass removal only) other nuisance mammals (carcass removal only) pigeons and other nuisance birds (carcass removal only)

Spec Item

Title Description

2 Management and Administration

2.1 Definitions and

Acronyms

Definitions and Acronyms are listed in J-1503020-01.

2.2 Personnel In addition to the Employee Requirements specified in Annex 2, the Contractor shall provide personnel with the qualifications specified below:

2.2.1 Certification, Training and Licensing

All Contractor personnel who apply pesticides shall comply with the certification requirements in DoD Environmental Final Governing Standards (FGS) Italy and shall licensed by the Italian government to provide pest control in the categories specified in this contract and shall be registered with the applicable Chamber of Commerce for pest management work. All work performed shall be in accordance with local laws and installation policies and regulations. Proof of certification shall be provided per Section F.

Only qualified personnel holding valid Class I and II type licenses issued by the Italian “Ispettorato Provinciale dell’Agricoltura” are permitted to purchase, handle, mix, use and apply pesticides. The qualified personnel must have the appropriate license (patentino) consistent with the local standard and Italian regulations for certification of Pest Control Operators, 2nd Edition (Revised 1 July 1957) and its subsequent modifications and additions. The qualified personnel shall have received, as minimum, the following training in:

(1) applicable pest inspection procedures for pests involved in the scope of work

(2) differentiation of non-target species

(3) the habits and life histories of the pests to be controlled

(4) selection, application, and evaluation of appropriate control procedures

(5) utilization of non-chemical control methods

(6) safe and effective application techniques, and the calibration and use of all required equipment

(7) handling, storage, and transfer of pest control materials as required

(8) reading, interpreting, and following pesticide label instructions

(9) procedures for fire prevention and for protecting food, food utensils, food preparation areas, and pets

(10) use and maintenance of all required safety equipment

(11) the consequences of preparing a pesticide to be given or sold to an individual who is other than an authorized employee of the Contractor, or a regulatory official

(12) developing and giving instructions to occupants on precautions to follow before, during and after rendering service

(13) determining conditions conductive to pest infestations, and in making recommendations for the required improvements thereof

(14) procedures for handling pesticides spills, including reporting procedures

(15) the security of vehicles and equipment

2.2.2 Medical

Surveillance

In compliance with FGS Italy (C11.4: Medical Surveillance) requirements, the Contractor shall submit proof to the KO prior to the start of work that all pesticide applicators are registered in a medical surveillance program to monitor the health and safety of persons occupationally exposed to pesticides.

2.3 Special

Requirements

2.3.1 Business Licensing The Contractor shall possess a business license issued by the Italian applicable authority to provide pest control services. Proof of local/state licensing shall be provided per Section F.

Item

Title Description

2.3.2 Permits The Contractor shall obtain all necessary permits required to perform the work in this contract. A copy of any applicable permit shall be provided per Section F.

Informational Note: Currently there are no necessary permits required.

2.3.3 Vehicles Vehicles used to transport pesticides shall be equipped with a fire extinguisher, a spill containment kit capable of containing any potential pesticide spill, an emergency eye wash station, at least two gallons of emergency wash water for personal decontamination, and a first aid kit. All pesticides carried on vehicles shall be stored in a locked compartment separate from the cab of the vehicle.

Vehicles shall not be left unattended at any time unless properly locked and secured. Pest control vehicles shall be marked with the owner's or Contractor's name clearly identified as a pest control vehicle per state regulations. Each vehicle shall display applicable state or federal department of transportation or agency placard and other identification markings as required by Italian government regulations. All vehicles shall be maintained with a clean and orderly appearance, free from pesticide residues or grime buildup. Vehicles shall not be cleaned, washed, or rinsed on Government property.

2.3.4 Equipment The Contractor shall provide repair and maintenance as necessary to keep all equipment in good operating condition, and take appropriate action regarding the following:

All tanks, hoses, pumps, control valves, and gauges shall be free of visible deterioration, shall not leak, and shall operate at the manufacturer's recommended rates and pressures. Equipment that has failed shall be replaced or repaired by the Contractor prior to resuming operations.

Screens, strainers, and filters shall be used and maintained per the pump, sprayer, and nozzle manufacturer's instructions.

Spray nozzles shall deliver spray patterns as specified by the nozzle manufacturer.

Nozzles that become clogged or eroded shall be repaired or replaced by the Contractor prior to resuming operations.

Ultra-Low Volume (ULV) equipment shall be calibrated to assure proper flow rate and droplet size of pesticide as required by the label. ULV equipment shall be calibrated, including droplet size analysis, 15 days prior to start of work and thereafter every 50 hours of use (or per manufacturer's recommendations), or when the machine is repaired. Calibration and droplet analysis reports, when required, shall be maintained on file and submitted per Section F.

All pesticide dispersal equipment, including bait stations and trays, shall be clearly and plainly marked with "DANGER"..."PESTICIDES", or as required by applicable regulations.

Specific equipment requirements relevant to individual Pest Groups are further delineated in the Pest Group Requirements in Section J.

2.3.5 Pesticides All pesticides must be used in accordance with Italian laws, installation policies and regulations, and any requirements identified in Section J attachments. All pesticides shall be procured, processed, handled, and applied in strict accordance with the manufacturer's label. Only pesticides on the Armed Forces Pest Management Board or approved registered Italian pesticides approved in writing by the appropriate pest management consultant can be used.

Item

Title Description

The Contractor shall maintain a book of labels and Safety Data Sheets (SDSs) for pesticides they use or intend to use, and have it readily available for the COR's inspection at all times.

New Pesticide Request and Planned Pesticide Use Sheet, provided in J-1503020- 02, including labels and SDS for each pesticide intended for use, shall be submitted per Section F with the Contractor’s Work Plan. Approvals may be made for and limited to specific pests and sites. Any proposed changes in pesticide usage shall be submitted per Section F for approval prior to use.

2.3.5.1 New Pesticide

Request and Planned Pesticide Use (PPU) Sheet

The New Pesticide Request and Planned Pesticide Use Sheet shall be included as part of the Contractor’s Work Plan (CWP). One New Pesticide Request and Planned Pesticide Use Sheet shall be filled out for each pest that will be controlled with a pesticide. If more than one pesticide is used to control the pest, one New Pesticide Request and Planned Pesticide Use Sheet shall be filled out for each of the pesticides used per pest. A New Pesticide Request and Planned Pesticide Use Sheet shall be filled out whenever pesticides used to control a pest are changed.

Completed New Pesticide Request and Planned Pesticide Use Sheet shall be attach to the CWP.

The New Pesticide Request and Planned Pesticide Use Sheet shall be filled out on-line. The regional NAVFAC Applied Biology Center must be contacted to obtain a link to the website, password, and instructions to use the system.

A screen shot of New Pesticide Request and Planned Pesticide Use Sheet is provided in J-1503020-02.

2.3.5.2 Pest Management

Reporting

The Contractor shall create and submit a completed electronic Pest Management Record for each pest management operation, both chemical and non-chemical, e.g., pest survey, pesticide application, service orders, per Section F.

The Contractor shall use the NAVFAC PPMC approved NAVFAC Online Pesticide Reporting System (NOPRS) located at https://clients.emainc.com/PestManagementNET/PesticideLogon.aspx and shall contact the regional NAVFAC PPMC to obtain a password and tutorial instructions on how to use the system.

Reports are accurate, complete and submitted within the time specified in each of the Pest Group Requirements provided in Section J.

2.3.6 Disposal All pesticides, rinse water, and containers shall be disposed of per pesticide label directions. The Contractor shall dispose of any pesticides, pesticide containers, pesticide residue, pesticide rinse water, or any pesticide contaminated articles at an authorized disposal area off-site from the installation.

2.3.7 Spills and

Decontamination

Any spills of hazardous substances resulting from Contractor’s operations under this technical specification shall be contained, cleaned-up, decontaminated, and disposed of in accordance with local laws and applicable DoD policies, instructions and guidance listed in J- 1503020-03.

The Contractor shall immediately notify the NASSIG Fire Department, NASSIG Environmental office and the KO for any spills of hazardous substances resulting from Contractor’s operations under this technical specification. The Contractor shall contain the spill if possible using the tools in the spill kit and standby until the proper authorities arrive.

2.3.8 On-Site Mixing The Contractor shall not mix pesticides on Government property.

Item

Title Description

2.3.9 On-Site Materials

Storage

The Contractor shall not store pesticides on Government property.

2.3.10 Occupied Spaces Liquid or aerosol pesticides shall not be applied in occupied spaces when people are present. Dust pesticide formulations shall not be applied in occupied spaces if the dust can be carried by air currents to people. Gel baits, cockroach, rodent, and ant bait stations, or other pesticide formulations that do not volatize or drift in air currents may be applied in occupied spaces.

2.3.11 Personal Protective

Equipment (PPE)

The Contractor shall provide PPE to each of their pest control applicators. This equipment shall include, at a minimum, the PPE required by the pesticide label and SDS.

2.4 References and

Technical Documents

References and Technical Documents are listed in J-1503020-03.

Spec Item Title Performance

Objective Related Information Performance

Standard 3 Recurring Work The Contractor shall provide pest control services to ensure pests are controlled in a proper and timely manner.

The Contractor shall comply with the NASSIG Integrated Pest Management Plan (IPMP) provided in J-1503020-04, and applicable DoD and OPNAV Instructions, and local policies and regulations.

Service Level Standards for Pest Control services are specified in J-1503020-05.

The Contractor shall develop and execute a Contractor’s Work Plan (CWP) for pest control services. The CWP shall adhere to applicable References and Technical Documents contained in J-1503020-03. The CWP shall establish the strategy and methods for conducting a safe, effective, and environmentally sound pest management program in compliance with the specifications. The Contractor may review the installation’s historical records of pest activity and abatement actions, survey facilities and grounds, and consult with the Installation IPMC in development of a CWP. The CWP shall address continuous monitoring, pest response and removal procedures, record keeping, warranties, education and communication to installation personnel to prevent pests and disease vectors, bird control on applicable airfields and in hangars, etc. The IPM approach should use targeted (i.e., effective, environmentally sound) methods including habitat/facility modification, biological/genetic/cultural control, mechanical/physical control, and where necessary, the judicious use of least hazardous pesticides. The CWP shall include labels, Safety Data Sheets, New Pesticide Request, Planned Pesticide Use (PPU)

Services are performed as specified by and consistent with the Service Level Standards listed in J-1503020-05.

Pests are controlled to levels and within times specified in the Pest Group Requirements in Section J.

Objective Related Information Performance

Standard Sheets, and comply with all applicable local, state, DoD and Federal policy and regulations, and the IPMP.

The CWP shall be submitted per Section F for review, comments, and acceptance.

The Contractor shall report conditions that promote or are conducive to pest infestations.

These include sanitation problems, improper food storage practices, inadequate exclusion policies, or damaged or missing exclusion devices or the like.

The Contractor shall report these conditions per Section F. Report must be legible and can be submitted electronically or hand-written to the COR/PAR.

Prior to performing pest control services outside the installation exterior perimeter border/fenced line, the Contractor shall coordinate access as necessary with local authorities or property owners.

3.1 Scheduled Pest

Control

The Contractor shall provide scheduled pest control services to ensure the appearance and infestation of pests are controlled in a proper and timely manner.

Scheduled pest control services shall include both inspection and treatment of the following categories of pests: nuisance pests, public health pests, structure damaging pests, lawn turf and ornamental plant pests, vegetation management, and vertebrate pests.

The Contractor shall perform pest control for public health pests and pests that may adversely affect the DoD mission and military operations;

the health and well-being of people; and structures, material, and property.

Preventive applications of pesticide in the absence of a pest or signs/symptoms of a pest are prohibited except in cases, such

Pests are controlled to levels and within times specified in the Pest Group Requirements in Section J.

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Pest survey and management operations reports submitted within specified times in

Objective Related Information Performance

Standard as termite pretreatment, pre-emergence weed and mosquito larval control (in special circumstances, such as pre-flood), where it is an effective means of Integrated Pest Management (IPM).

The Contractor shall submit a monthly Pest Monitoring report in accordance with the Pest Group Requirements provided in J-1503020-07 to J-150302012, Time Period to Respond, Time Period to Obtain Control and Time Period to Maintain Control, per Section F.

3.1.1 Nuisance Pest

Control

The Contractor shall control nuisance pests to ensure facilities are free from nuisance pests.

The Contractor shall perform scheduled pest control for Nuisance Pests at the facilities listed on the Frequencies for Scheduled Work table in J- 1503020-06.

The following nuisance pest areas shall be inspected and treated, as necessary, per the General Requirements and Performance Standards specified within Nuisance Pest Requirements in J-1503020-07:

001 Ant Control 002 Arthropod Control in

Food Handling Establishments 003 Cockroach Control 004 Flea Control in and

Around Buildings and Structures

005 Miscellaneous Arthropod Pest Control

006 Stored Product Pest Control (Arthropods)

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Pests are controlled to levels and within times specified for Nuisance Pest Requirements in J- 1503020-07.

3.1.2 Public Health Pest

Control

The Contractor shall control public health pests to prevent vector borne diseases or impacts to public health.

The Contractor shall perform scheduled pest control for Public Health Pests at the facilities listed on the Frequencies for Scheduled Work table in J- 1503020-06.

The following public health pest areas shall be inspected and

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Pests are controlled to levels and within

Objective Related Information Performance

Standard treated, as necessary, per the General Requirements and Performance Standards specified within Public Health Pest Requirements in J-1503020-08:

008 Adult Mosquito Control 009 Adult Mosquito Control -

Residual 010 Adult Mosquito

Surveillance 011 Bed Bugs 012 Bee, Wasp, Hornet, and

Stinging Arthropod Control 013 Childcare

Facilities/Sensitive Areas Pest Control

014 Filth Fly Control 015 Larval and Pupal

Mosquito Control 016 Larval Mosquito

Surveillance 017 Tick Survey and Control

Outdoors 018 Fire Ant Control times specified for Public Health Pest

1503020-08.

3.1.3 Structure

Damaging Pest Control

The Contractor shall control structure damaging pests to ensure facilities are free of structure damaging pests.

The Contractor shall perform scheduled pest control for Structure Damaging Pests at the facilities listed on the Frequencies for Scheduled Work table in J-1503020-06.

The following structure damaging pest areas shall be inspected and treated, as necessary, per the General Requirements and Performance Standards specified within Structure Damaging Pest Requirements in J-1503020-09:

019 Other Wood Destroying

Organisms (Non-Termite) Control

020 Survey for Termite and Wood Destroying Organisms

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Pests are controlled to levels and within times specified for Structure Damaging Pest

1503020-09.

3.1.4 Lawn, Turf and

Ornamental Plant Pest Control

The Contractor shall control lawn, turf and ornamental plant pests to ensure facilities are free of lawn, turf

The Contractor shall perform scheduled pest control for Lawn, Turf and Ornamental Plant Pests at the facilities listed on the Frequencies for Scheduled Work table in J-1503020-06.

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Objective Related Information Performance

Standard and ornamental plant pests.

The following lawn, turf and ornamental plant pests/pest areas shall be inspected and treated, as necessary, per the General Requirements and Performance Standards specified within Lawn, Turf and Ornamental Plant Pest Requirements in J- 1503020-10:

021 Mole Cricket Control 022 Turf and Ornamental Pest times specified for Lawn, Turf and Ornamental Plant Pest Requirements in J-1503020-10.

3.1.5 Vegetation

Management

The Contractor shall manage vegetation to ensure facilities are free of vegetation pests.

The Contractor shall perform vegetation management for aquatic and non-aquatic vegetation pests at the facilities listed on the Frequencies for Scheduled Work table in J- 1503020-06.

The following vegetation pest areas shall be inspected and treated, as necessary, per the General Requirements and Performance Standards specified within Vegetation Management Requirements in J-1503020-11:

024 Industrial Sidewalk, Substation, Vault and Right-of-Way Weed Control

025 Turf and Ornamental Bed Weed Control

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Pests are controlled to levels and within times specified for Vegetation Management

1503020-11.

3.1.6 Vertebrate Pest

The Contractor shall control vertebrate pests to ensure facilities are free of vertebrate pests.

The Contractor shall perform scheduled pest control for Vertebrate Pests at the facilities listed on the Frequencies for Scheduled Work table in J- 1503020-06.

The following vertebrate pest areas shall be inspected and treated, as necessary, per the General Requirements and Performance Standards specified within Vertebrate Pest Requirements in J-1503020-12:

026 Bat Control in Buildings

Pest surveys are conducted at the Frequencies for Scheduled Work specified in J- 1503020-06.

Pests are controlled to levels and within times specified for Vertebrate Pest

1503020-12.

Objective Related Information Performance

Standard 027 Commensal Rodents in and Around Buildings and Structures

028 Pest Bird Control 029 Pest Vertebrate Control

3.2 Pest Control

Service Orders

The Contractor shall perform service orders in a timely manner to ensure the appearance and infestations of pests are controlled.

The Contractor shall receive pest control service orders per the work reception requirements in Annex 2.

The Contractor shall schedule and perform pest control service orders in a way that minimizes disruptions to customers and Government operations.

The Contractor shall respond to pest control service orders in accordance with the response times stated for each pest group performance standard in Section J.

The Contractor has full responsibility for any work up to the pest control service order limit of liability of $1,000 in direct labor and direct material and equipment cost per pest control service order. The Government will only pay for the portion of direct labor and/or direct material that exceeds the pest control service order limits of liability.

The Contractor shall notify the KO upon identification that the pest control service order will exceed the specified limits of liability in accordance with reporting requirements in Annex

2. If a non-recurring work is issued for the portion exceeding the specified pest control service order limits of liability, the Government will only pay for the portion of direct labor and/or direct material that exceeds the pest control service order limits.

times specified in the corresponding pest group requirements in Section J

Objective Related Information Performance

Standard Examples of work exceeding the pest control service order limits of liability:

If a pest control service order requires $1,100 in direct labor and direct material cost, the Government may issue a task order in accordance with the Non-Recurring Work provisions of the contract for the one direct labor hour and $100 in direct material cost that exceeds the pest control service order limit of liability.

The Contractor may invoice for completed pest control service orders. The Contractor shall not invoice for incomplete pest control service orders and pest control service orders not issued.

A modification will be process at the end of each period of performance to deduct for pest control service orders not issued and incomplete pest control service orders. Deduction will be based on the unit prices specified in Attachment J- 0200000-XX ELINs.

The Contractor shall survey the area to determine the level of infestation prior to performing treatment.

The Government may combine multiple services requirements recently received for the same general area, e.g., floor of a building or structure into a single pest control service order provided the Contractor’s pest control service order limits of liability are not exceeded.

Submit a monthly summary report of completed pest control service orders to include completed counts by funding activity per section F and upon KO’s request. Report shall

Objective Related Information Performance

Standard clearly state when services are performed.

Annual anticipated numbers of pest control service orders by funding activity are provided in J-1503020-14.

3.2.1 Unscheduled Pest

Control Services for Family Housing at NAS I (Hill Drive)

The Contractor shall perform pest control services to ensure the appearance and infestations of rodents, ants and mosquitoes are controlled in a proper and timely manner.

The Contractor shall first inspect and then treat as necessary per pest control group sheets provided in J-1503020-07 to J- 1503020-12 Family Housing grounds, vegetation and facilities six (6) times a year to eradicate infestation to include but not limited to:

--Nuisance, disease vector and health arthropod and invertebrate pests (Cockroaches, termites, bees, wasps, ants, fleas, silverfish, Mosquitoes, sandflies, bedbugs, weevils, centipedes, ticks, beetles, spiders).

--Vertebrate pests (mice, rats, moles, snakes, bats, feral animals, other nuisance mammals, pigeons and other nuisance birds). Per Italian law, bats, feral dogs and cats, other nuisance mammals, pigeons and other nuisance birds cannot be trapped, relocated or euthanized, and the Contractor shall only perform carcass removal.

The Government will provide the Contractor 24-hour notice prior to commence services.

Services shall be performed six

(6) times per year, during the months of January to December.

The Contractor shall survey the area to determine the level of infestation prior to performing treatment.

Pest control services for adult mosquitoes shall be performed in the early morning hours (between 3am-6am). The

Pests are controlled to levels and within times specified in the corresponding pest group requirements in

Objective Related Information Performance

Standard Contractor shall nebulize and spray approved pesticide utilizing fog-generating equipment.

The Contractor shall schedule and perform pest control services in a way that minimizes disruptions to Family Housing residents and guests, and Government operations.

Appointments shall be coordinated with Housing Representative.

The Contractor shall provide an Unscheduled Pest Control Services for Family Housing at NAS I (Hill Drive) Status Report per Section F and upon KO’s request. Report shall clearly state when services are performed.

Family Housing property inventory and site map are provided in attachment J- 1401000-03 FH Facility Property Inventory and Maps.

3.3 Pest Management

Reporting

The Contractor shall report pest management operations to ensure the effectiveness and safety of control efforts can be monitored in a proper and timely manner.

The Contractor shall create and submit a completed electronic Pest Management Record for each pest management operation, both chemical and non-chemical, e.g., pest survey, pesticide application, pest control service order, per section F.

The Contractor shall record pest management operations daily.

Records shall include all pest management operations including surveys and non-chemical control operations performed on the installation by commercial contractors as well as work performed by DoD pest management personnel, as applicable. The records shall include the following information: date of application, location and site, type of

Reports are accurate, complete and submitted at least monthly.

Objective Related Information Performance

Standard operation, target pest, area treated, name of applicator, pesticide information (trade name, active ingredient, and formulation), amount of pesticide applied, and calculated pounds of active ingredient applied. All pest management activities and submit reports including actual pesticide use should be submitted through the NAVFAC Online Pesticide Reporting System (NOPRS).

The NOPRS website is:

https://noprs.pestlogics.com/

Refer to the New Pest Management Record provided in J-1503020-02 for a sample of an online Pest Management Record.

The Contractor shall submit the Pest Management Operations Report per Section F using the NAVFAC PMC approved online pest management reporting system. Contact the regional NAVFAC PMC to obtain an account and instructions on how to use the system.

Objective Related Information Performance

Standard 4 Non-

Recurring Work

Non-Recurring work may be ordered utilizing DoD FEDMALL in accordance with Section H or on a task order in accordance with the

PROCEDURES FOR

ISSUING ORDERS

clause in Section G.

The order will specify the exact locations and types of work to be accomplished. The period of performance will be specified in each order.

Refer to Non-Recurring Work ELINs for task listings, descriptions and related requirements. All periods of performance are measured from issue date of order to acceptance of the work.

Performance Standards for Non- Recurring work will be the same as those in Spec Item 3 where applicable.