7d. 578-20-002 Basis of Design -BOD Part 4.pdf

C alm

-Branches Branches is part of the Calm Collection, a collaboration with 13&9 and Fractals Research.

Inspired by glimpses of trees overhead, Calm-Branches creates a visual landscape that helps reduces stress through natural fractal patterns. The design is built from a three-part line, repeated, re-scaled, and rearranged with scientific precision. The resulting surface prompts the same eye movements as a canopy of crisscrossing branches. Research shows that perceiving natural fractal patterns activates a stress-relief response in our bodies. By tapping into that natural response, Calm-Branches supports a sense of calmness and concentration in your spaces.

Pro d u ct Sp e cificatio n s

01FACT.DESIGN / 423.709.8787 / PATENT PENDING

C alm

-Branches

Pro d u ct Sp e cificatio n s

Material 9mm Polyester (PET) Felt +/- 0.35"

Size 24” (l) x 24” (w) x +/- .7” (d)

Weight

3.5 lb

Warranty 3-Year

Flammability ASTM E84 Class A Certified / CAN/ULC-S102.2

Environmental Polyester (PET) felt 60% pre-consumer recycled

Color Choose from one of our standard colors shown below. See page 4 for additional colors that can be added as accents to your design.

Slight variations in color should be expected when using this material.

We suggest that you request a material sample to verify felt colors.

FACT.DESIGN / 423.709.8787 / PATENT PENDING

Acoustics

Wall installation

• Test Method - ASTM E795-16 Type E-400 Mounting - NRC ..30

Testing results available upon request at sales@fact.design

Lead Time Ships in four (4) weeks

Application Commercial/Office, Education, Hospitality, Retail

Pattern Non-Directional

Installation / Maintenance

Each pattern repeats every 8 tiles and is non-directional. The tiles should be installed with a construction- grade adhesive specified by the contractor. Please note that due to the nature of the material seaming between tiles can show. Also, there can be some inconsistencies in both color and thickness between tiles.

To remove dust or air-born particulate matter, simply vacuum the tiles or use compressed air. For deeper cleaning of stains, use a clean cloth or sponge with a non-solvent base solution of carpet shampoo always making sure to follow the manufacturer’s instructions. Starting from the outside of the stain work in a circular motion towards the center which should avoid spreading the stain.

Afterwards, use a clean sponge or cloth with clean warm water to remove excess moisture. Allow to dry, then brush the area gently with a soft brush if needed.

The treatments listed above are intended as general guidance only. FACT design takes no responsibility for any damage that may occur from the execution of the treatment listed above.

C alm

-Branches

Pro d u ct Sp e cificatio n s

FACT.DESIGN / 423.709.8787 / PATENT PENDING

04FACT.DESIGN / 423.709.8787

FA

C

T a���¸Ø �olors (U S only)

®ça�raØ �¢ç¢¸a Ď ij CaØa�orî B

:¢¸ģ P�ÍÝ¢r�·�¸Øsĝ C�¢l¢¸�s ij Ďčċ sÍģ �Øģ Ë�r �olor jalls ij 4ċ sÍģ �Øģ Ë�r �olor

'� îoÝr Ëro¬��Ø r�ÍÝ¢r�s l�ssĞ Ël�as� r�a� oÝØ Øo îoÝr lo�al r�Ë Øo �¢s�Ýss Ø � Ëro¬��Øģ

®ça�raØ �¢ç¢¸a :�la¸�� Ď ij CaØa�orî B

:¢¸ģ P�ÍÝ¢r�·�¸Øsĝ C�¢l¢¸�s ij Ďčċ sÍģ �Øģ Ë�r �olor jalls ij 4ċ sÍģ �Øģ Ë�r �olor

'� îoÝr Ëro¬��Ø r�ÍÝ¢r�s l�ssĞ Ël�as� r�a� oÝØ Øo îoÝr lo�al r�Ë Øo �¢s�Ýss Ø � Ëro¬��Øģ

®ça�raØ �¢ç¢¸a :� ij CaØa�orî B

:¢¸ģ P�ÍÝ¢r�·�¸Øsĝ C�¢l¢¸�s ij Ďčċ sÍģ �Øģ Ë�r �olor jalls ij 4ċ sÍģ �Øģ Ë�r �olor

'� îoÝr Ëro¬��Ø r�ÍÝ¢r�s l�ssĞ Ël�as� r�a� oÝØ Øo îoÝr lo�al r�Ë Øo �¢s�Ýss Ø � Ëro¬��Øģ

�a·¢ra laô�r ij CaØa�orî A

:¢¸ģ P�ÍÝ¢r�·�¸Øsĝ C�¢l¢¸�s ij Čđċ sÍģ �Øģ Ë�r �olor jalls ij 4ċ sÍģ �Øģ Ë�r �olor

'� îoÝr Ëro¬��Ø r�ÍÝ¢r�s l�ssĞ Ël�as� r�a� oÝØ Øo îoÝr lo�al r�Ë Øo �¢s�Ýss Ø � Ëro¬��Øģ

�a·¢ra laô�r 4¢Ø� ij CaØa�orî A

:¢¸ģ P�ÍÝ¢r�·�¸Øsĝ C�¢l¢¸�s ij Čđċ sÍģ �Øģ Ë�r �olor jalls ij 4ċ sÍģ �Øģ Ë�r �olor

'� îoÝr Ëro¬��Ø r�ÍÝ¢r�s l�ssĞ Ël�as� r�a� oÝØ Øo îoÝr lo�al r�Ë Øo �¢s�Ýss Ø � Ëro¬��Øģ https://www.camirafabrics.com/us/contract/fabrics/blazer https://www.camirafabrics.com/us/contract/fabrics/blazer-lite https://www.kvadrat.dk/en/products/upholstery/1200-divina-3 https://www.kvadrat.dk/en/products/upholstery/1213-divina-melange-3 https://www.kvadrat.dk/en/products/upholstery/1219-divina-md https://www.fact.design/find-a-rep https://www.fact.design/find-a-rep https://www.fact.design/find-a-rep https://www.fact.design/find-a-rep https://www.fact.design/find-a-rep

04FACT.DESIGN / 423.709.8787

FA

C

T a���¸Ø �olors (C anada only) metro faux felt - Category A

:¢¸ģ P�ÍÝ¢r�·�¸Øsĝ C�¢l¢¸�s ij none jalls ij none https://metrowallcoverings.com/interior-solutions/acoustical-solutions/revetement-mural-acoustique-en-faux-feutre

Nordic

FACT SHEET

Like the landscape of a forest, Nordic captures the basic beauty and peaceful tones of many wood species.

US UNITS

35 oz. PLY

22.4 oz. PSY

52 in.

METRIC UNITS

992 g PLM 635 g PSM

132 cm.

Total Weight

Roll Width

Backing

Federal Spec.

WA Spec.

ASTM F-793

Fire Testing

Indoor Air Quality

Repeat Vertical Horizontal Nominal Information Match Information

1 When applied to GRC board with A-848-B adhesive

Available in 8 Colorways NRD1-12 Washed NRD1-91 Weathered NRD1-46 Beam NRD1-95 Smoked NRD1-14 Maple NRD1-42 Ash NRD1-44 Teak NRD1-48 Walnut

E222-98 Smoke

NRD1-03/2020

FlexTM Decorative Wall Protection

3875 Embassy Parkway Fairlawn, OH 44333

855.753.5474 | koroseal.com

Koroseal® is a registered trademark of Koroseal Interior Products, LLC.

FlexTM is a trademark of Koroseal Interior Products, LLC.

©2020 Koroseal Interior Products, LLC.

Woven

CCC-W-408D, Type III

WA-101, Type III

Category VI, Type III ASTM E-84, CAN S102M Tunnel Test1

Class A Rating

NFPA 286 - Meets 2006 IBC Section 803.2.1

California 01350 – Meets emission requirements for schools and offices

N/A N/A 52 in.

Non-Reverse Hang, Random Match

STRATTA UNLIT

02 / 27 / 22 UPDATE 1 / 4

Stratta Unlit

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

ACOUSTIC COLLECTION

CERTIFICATION � Sola Felt has been independently tested and meet the criteria for approved interior finishes as described in the 2018 International Building Code®. See 3form Sola Felt spec sheet for more information.

WARRANTY � 5 year warranty on all standard components.

CARE � The best way to remove airborne debris and dust from shades is to periodically vacuum. A Swiffer sheet or feathered duster can also be used for light dusting.

To treat liquid stains, remove spills immediately with a clean damp cotton cloth or with detergent soap and warm water. Carpet and fabric cleaners can usually be used. Always test an inconspicuous area before applying cleaners to the actual stain.

CONSTRUCTION � Sola Felt over metal frame.

END CAPS � Fixture body color-matched Sola Felt standard; wood end caps optional.

SHADES � 9mm thick Sola Felt is a PET material, manufactured with 50% post-consumer recycled content. Sola Felt is a LBC Red List Free labeled product, eligible for LEED, Living Building Challenge, and other green building certification credits.

MOUNTING � Adjustable stainless steel aircraft cable, contact studio for lengths over 20’.

Specifications

Overview

02 / 27 / 22 UPDATE 2 / 4

Stratta Unlit

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

ACOUSTIC COLLECTION

DIMENSIONS

HEIGHT, WIDTH, LENGTH

FELT COLOR OPTIONS

Fixture Options

Also available lit. See Stratta Spec Sheet.

6″ H 1.93″ W

12″ H 1.93″ W

16″ H 1.93″ W

37.5” L—FELT END CAP

38” L—WOOD END CAP

49.5” L—FELT END CAP

50” L—WOOD END CAP

61.5” L—FELT END CAP

62” L—WOOD END CAP

73.5” L—FELT END CAP

74” L—WOOD END CAP

85.5” L—FELT END CAP

86” L—WOOD END CAP

97.5” L—FELT END CAP

98” L—WOOD END CAP

WOOD FELT

END CAP CONFIGURATIONS

EBONY

ZINCADMIRAL

CAST

DRIFTWOOD

JASPER

MINERAL

DUNEEMERALD

ARMOR

DUSK

CITRINE

NICKEL

BODY FELT

COLOR

ASH

OAK

STEELBLUE

SAFFRON

MUSTARD

ARIES

SILTOCHRE

NIGHTFALL

STEEL

PLATINUM

02 / 27 / 22 UPDATE 3 / 4

Stratta Unlit

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

ACOUSTIC COLLECTIONAcoustic Details

SABINS PER FIXTURE Equivalent square feet of perfect absorption

The NRC of Stratta ranges from 0.75 to 1.00, depending on the size and configuration tested. Formal testing reports are available for more information.

CENTER FREQUENCY ( HZ ) 49 – 16 – 2 STRATTA 49 – 12 – 2 STRATTA 49 – 6 – 2 STRATTA

100 0.66 0.24 -0.02

125 1.26 0.59 0.34

160 1.90 1.13 0.26

200 2.35 1.81 0.62

250 3.10 2.25 0.94

315 4.66 3.19 1.35

400 5.68 3.77 1.60

500 6.56 4.80 2.12

630 7.71 5.42 2.58

800 8.89 6.48 3.30

1000 10.01 7.33 3.61

1250 10.63 8.25 4.21

1600 11.36 8.65 4.58

2000 11.64 9.08 5.00

2500 11.82 9.26 5.09

3150 11.63 9.07 5.13

4000 11.50 8.96 5.16

5000 11.71 9.03 5.11

6300 11.93 8.99 5.25

8000 12.14 8.91 5.13

10000 12.03 8.99 5.24

AVERAGE OF 250, 500, 1000, 2000 7.83 5.86 2.92

EQUIVALENT SQ FT OF ACT ( NRC 0.70 ) 11.18 8.38 4.17

RANGE OF HUMAN VOICE

125 250 500 1000 2000 4000 8000

The Stratta line was tested in accredited laboratories to study the impact of fixture size and configuration on acoustic performance.

49 – 16 – 2 ACOUSTIC STRATTA

49 – 12 – 2 ACOUSTIC STRATTA

49 – 6 – 2 ACOUSTIC STRATTA

OCTAVE BAND CENTER FREQUENCY (HZ)

S A

B

IN

S P

E R

F

IX

T U

R E

Absorption

The acoustic testing of Stratta was conducted at NVLAP accredited laboratories and meets ISO 354 and ASTM C423. Formal test reports are available upon request.

02 / 27 / 22 UPDATE 4 / 4

Stratta Unlit

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

ACOUSTIC COLLECTION

SPECIFICATION CODE

ACC STR UNLT

QTY.

Example: 2 QTY ACC – STR – UNLT – 49L – 12H – CT – FELT – PM – CRLNA – STD – D

Part Number Specification

1 4 72 53 86

Complete form to order Stratta fixture(s). For each number, make one selection and enter in the corresponding box above.

*Indicates modified choices; additional lead times and/or costs may apply.

37L

49L

61L

73L

85L

97L

CRL *

1 LENGTH ( Nominal )

EB

NF

CA

ML

STL

AR

NI

ZN

EBONY

NIGHTFALL

CAST

MINERAL

STEEL

ARMOR

NICKEL

ZINC

EM

AD

DK

STB

PT

SLT

DW

DN

EMERALD

ADMIRAL

DUSK

STEELBLUE

PLATINUM

SILT

DRIFTWOOD

DUNE

SF

JP

AS

OCH

MU

CT

SAFFRON

JASPER

ARIES

OCHRE

MUSTARD

CITRINE

3 FELT COLOR

37.5″ LENGTH

49.5″ LENGTH

61.5″ LENGTH

73.5″ LENGTH

85.5″ LENGTH

97.5″ LENGTH

CUSTOM ROW LENGTH

Custom rows from 3′ to 200′ in 1′ increments available

CRLNA

CUSRL *

PM

CRW *

STD

EXT*

7CONTINOUS ROW LENGTH

MOUNTING

SUSPENSION

NOT APPLICABLE

Individual lengths cannot be joined in the field

CUSTOM ROW LENGTH

Specify custom length in 1′ increments from 3′ to 200′ ft

INDIVIDUAL FIXTURE

CONTINUOUS ROW FIXTURE�

12″— 96″

12″— 240″

6H

12H

16H

HEIGHT ( Nominal )2

6″ HEIGHT

12″ HEIGHT

16″ HEIGHT

FELT

WOE *

WAE *

4 ENDCAP Optional wood endcap

FELT BODY COLOR

Endcap will match shade material color

�OAK WOOD

ASH WOOD�

I

D

FIXTURE ORIENTATION8

INDIRECT UNLIT

DIRECT UNLIT

Choose for the desired look or to match a system with lit versions

INDIRECT DIRECT

800 433 0790 800 200 8120800 222 7866800 433 0790 800 200 8120800 222 7866800 433 0790 800 200 8120800 222 7866

Stainless Steel Surface Mount End Wall Protector

2 [51mm]

END WALL

WIDTH

8 [16mm]

DRYWALL

(BY OTHERS)

STUDS

(BY OTHERS)

Provide a superior impact protection for use in kitchens, sanitation or other high abuse areas

Conform to NSF Standard 51 for direct food contact in food service areas. (Custom Type 304 Stainless Steel)

Specify the size you need! Typical wing sizes are 2" or 3".

Available in fl oor to ceiling heights, with a max height being 144".

INPRO CORPORATION

IPC.427/REV.3

Stainless Steel Surface Mount End Wall Protector Suggested Specifications

PART 1 - GENERAL

1.01 SUMMARY

A. Surface mount stainless steel end wall protector for wall protection:

1.02 SECTION INCLUDES

A. Surface mount stainless steel end wall protectors

1.03 SUBMITTALS

A. Product data for each type of end wall protector specified.

B. Detail drawings indicating mounting details with the appropriate fasteners for specific project substrates.

C. Material samples of stainless steel.

D. Cleaning and maintenance instructions for door and wall protection systems.

1.04 DELIVERY, STORAGE AND HANDLING

A. Deliver materials in unopened factory packaging to the jobsite and store in original packaging in a climate controlled location away from direct sunlight.

1.05 PROJECT CONDITIONS

A. Products must be installed in an interior climate controlled environment.

1.06 WARRANTY

A. Standard IPC Limited Lifetime Warranty against material and manufacturing defects.

PART 2 - PRODUCTS

2.01 MANUFACTURER

A. Acceptable Manufacturer:

InPro Corporation, PO Box 406 Muskego, WI 53150

USA;

Telephone: 800-222-5556, Fax: 888-715-8407, Internet address: http://www.inprocorp.com B. Substitutions: Not permitted C. Provide all stainless steel end wall protectors and wall protection from a single source.

2.02 MANUFACTURED UNITS

A. Custom Stainless Steel Surface Mount End Wall

Protectors

1. Stainless Steel End Wall Protectors Custom – 1" minimum wing width, 3" minimum end wall width Corner radius - 1/8" Height – 48" (1219mm) or custom. Maximun height of 144" (3658mm) All edges to be deburred.

2.03 MATERIALS

A. Stainless Steel: Custom stainless steel end wall protectors shall be manufactured from Type 430, 16 gauge stainless or Type 304, 16 gauge stainless steel. Also available in 14 and 18 gauge.

2.04 COMPONENTS

A. Attachment

1. Cement-on.

2. Screw-on

2.05 FINISHES

A. Stainless steel: No. 4 satin finish. All edges to be deburred.

PART 3 - EXECUTION

3.01 EXAMINATION

A. Examine areas and conditions in which the end wall protector and corner guards will be installed.

1. Complete all finishing operations, including painting, before beginning installation of end wall protectors and corner guards.

B. Wall surface shall be dry and free from dirt, grease and loose paint.

3.02 PREPARATION

A. General: Prior to installation, clean substrate to remove dust, debris and loose particles.

3.03 INSTALLATION

A. General: Locate the end wall protector as indicated on the approved detail drawing for the appropriate substrate and in compliance with the IPC installation instructions. Install end wall protectors, level and plumb at the height indicated on the drawings.

B. Installation of stainless steel end wall protectors:

1. Surface must be dry, clean and properly sealed.

2. Cement-on: Apply heavy-duty adhesive to the back of the end wall protector in a zigzag pattern.

Position the end wall protectors on the wall and press firmly in place.

Screw-on: Position the end wall protector on the wall, press firmly in place and attach with the provided fasteners.

3. Remove the protective plastic covering from the exposed surface of the end wall protector or corner guard.

3.04 CLEANING

A. At completion of the installation, clean surfaces in accordance with the IPC clean up and maintenance instructions.

SOLYX and SimGlas are trademarks of Decorative Films, LLC. © 2015 Decorative Films, LLC. All rights reserved.

Specification Sheet

Solyx® Glass Finishes SXJ-0545 Beach Grass Gradient

Product Description

SOLYX SXJ-0545 Beach Grass Gradient is a lightly textured, frosted polyester film with a beautiful pattern of beach grass surrounded by a mist that fades from solid white to clear. It is ideal for graduated privacy while allowing good light transmission.

Specifications Product Code SXJ-0545 Product Family Gradient Film Type Polyester Adhesive Type Pressure-Sensitive Usage Interior Available Height 71” (or custom) Full Roll Length 95 linear feet Thickness 4mil Shading Coefficient 0.55 Visible Light Reflection 27% Visible Light Transmission Average - 34% UV Transmission 2% Total Solar energy Rejected 38% Solar Energy Absorbed 25% Infra-Red Transmission 70%

Product Construction

Face Film 4 mil Polyester

Adhesive Clear, Pressure-Sensitive

Release Liner Silicone Coated

Product Details

SOLYX SXJ-0545 Beach Grass Gradient is a lightly textured, frosted polyester film with a beautiful pattern of beach grass surrounded by a mist that fades from solid white at the bottom to clear at the top. This durable film is manufactured with a silicone coated liner which protects the clear, pressure-sensitive adhesive and is designed for application to interior glass, single- or double-pane, and exterior facing glass. It is ideal for privacy, decorative, or architectural applications.

Flammability Rating This product meets ASTM E84 and is classified as Class A as defined in NFPA 101, Life Safety Code®.

LEED Credit EQ 4.1 Low Emitting Materials, Adhesives & Sealants This product has zero VOC content according to 40 CFR 59, Subpart D (EPA method 24).

Installation and Warranty

Installation Installation should be in accordance with the manufacturer's installation instructions. This film is applied using the same tools and techniques used for installing window tinting films.

Warranty This SOLYX product will be free from defects in material and manufacture for a period of five (5) years from the date of installation.

See warranty information for specific details.

Product Distribution and Contact Information

Distribution SOLYX Decorative Films are available through authorized Installing Dealers, Distributors, or directly from Decorative Films, LLC.

Samples submitted upon request.

Contact Information Decorative Films, LLC 1-888-657-5224 www.decorativefilm.com http://www.decorativefilm.com/

8 Colorways:

JUN1-10 Origin JUN1-22 Heir JUN1-29 Heritage JUN1-30 Generation JUN1-35 Pedigree JUN1-36 Kin JUN1-48 Journey JUN1-77 Progeny

Designer Koroseal

Total Weight 35.0 oz. ply (992 g. plm.)

22.4 oz. psy (635 g. psm.) Vertical Repeat N/A

Roll Width 52 in. (132 cm.) Horizontal Repeat N/A

Backing Woven (Osnaburg) Nominal Pattern Width 52 in.

Tensile (Minimum) 50 x 55 lbf (222 x 245 N) Match Information Non-Reverse Hang, Random Match

Tear (Minimum) 25 x 25 lbf (111 x 111 N) WA Spec. WA-101, Type III

Federal Spec. CCC-W-408D, Type III ASTM F-793 Category VI, Type III

Fire Testing

NFPA 101® Life Safety Code®

NFPA 255 (ASTM E-84, CAN S102M) Tunnel Test1

- Class A Rating

NFPA 286 Corner Burn Test2

- Meets requirements for Flame Spread, Smoke Developed, and Flashover

1 When applied to GRC board with A-848-B adhesive 2 When applied to 5/8” Type-X-Gypsum board with A-848-B adhesive

CE Certification EU classification in accordance with EN 15102:2007 + A1:2011

Indoor Air Quality California 01350 – Meets emission requirements for schools and offices

For additional technical information please visit koroseal.com

3875 Embassy Parkway | Fairlawn, OH 44333 | 855.753.5474 | koroseal.com

Koroseal® is a registered trademark of Koroseal Interior Products, LLC.

FlexTM is a trademark of Koroseal Interior Products, LLC.

NFPA 101® and Life Safety Code® are registered trademarks of National Fire Prevention Association.

©2024 Koroseal Interior Products, LLC.

JUN1 | 03/2020

Junction - Flex Fact Sheet

8 Colorways:

URB1-15 Linen URB1-41 Purlesque URB1-45 Galaxy URB1-58 Cashmere URB1-75 Links URB1-77 Indigo URB1-81 Greige URB1-94 Mineralism

Designer Koroseal

Total Weight 35.0 oz. ply (992 g. plm.)

22.4 oz. psy (635 g. psm.) Vertical Repeat N/A

Roll Width 52 in. (132 cm.) Horizontal Repeat N/A

Backing Woven (Osnaburg) Nominal Pattern Width 52 in.

Tensile (Minimum) N/A Match Information Reverse Hang, Random Match

Tear (Minimum) N/A WA Spec. WA-101, Type III

Federal Spec. CCC-W-408D, Type III ASTM F-793 Category VI, Type III

Fire Testing

NFPA 101® Life Safety Code®

NFPA 255 (ASTM E-84, CAN S102M) Tunnel Test1

- Class A Rating

NFPA 286 Corner Burn Test2

- Meets requirements for Flame Spread, Smoke Developed, and Flashover

1 When applied to GRC board with A-848-B adhesive 2 When applied to 5/8” Type-X-Gypsum board with A-848-B adhesive

CE Certification EU classification in accordance with EN 15102:2007 + A1:2011

Indoor Air Quality California 01350 – Meets emission requirements for schools and offices

For additional technical information please visit koroseal.com

3875 Embassy Parkway | Fairlawn, OH 44333 | 855.753.5474 | koroseal.com

Koroseal® is a registered trademark of Koroseal Interior Products, LLC.

FlexTM is a trademark of Koroseal Interior Products, LLC.

NFPA 101® and Life Safety Code® are registered trademarks of National Fire Prevention Association.

©2024 Koroseal Interior Products, LLC.

URB1 | 03/2020

Urbane - Flex Fact Sheet

Accessed on June 28, 2024 Page 1/2

Xorel Strie

$37.00 /yd.

A $3.00 per yard cut charge applies to orders under 50 yards

Upholstered Walls/Panels Specifications Type: Acoustical, Moveable Walls (backing requirements vary by manufacturer), Tackable, Wrapped Panels, Xorel Artform

Backing: Unbacked

Backing Note(s): Acrylic: This backing provides a coating to enhance adhesion and prevent bleed through of adhesives (15 yard minimum), Heavy Acrylic: This backing provides a coating to enhance adhesion and prevent bleed through of adhesives and is preferred for heavier duty installs such as moveable wall systems (15 yard minimum), Unbacked: Acoustically transparent, highly tackable, ability to self heal, yarns can "move back" into position. Highly stable on panels and does not react to changes in humidity or moisture.

Available Backing(s): Acrylic, Heavy Acrylic

Finish(es): Finish-Free

Width: 56" (142 cm)

Weight per Linear Yard: 10.4 oz

Contents: 100% Xorel® (85% Biobased PE, 15% PE)

Cleaning Code: WS & BC - Water/Solvent & Bleach Cleanable

Flammability: ASTM E84 Class A / Class 1, Fabric meets Underwriters Laboratories (UL) 1286 Flammability Requirements for Office Furnishings, NFPA 265 Room Corner Test, NYC 294-40 SR

Acoustics: NRC of 0.9 when wrapped around a 2" thick panel, Test Method ASTM C 423

Manufactured In: EU

Warranty: 10 years

ACT Symbols:

Pattern: 6423

Accessed on June 28, 2024 Page 2/2

Programs/Partnerships Program Guidelines: GSA

Sustainability Standards and Certifications: Cradle to Cradle Certified Gold, Environmental Product Declaration (EPD), HHI (Healthier Hospitals Initiative), Kaiser Permanente, LEED, Living Product Certified, MindClick Rated - Leader, Mindful Materials, SCS Indoor Advantage™ Gold, TUV Austria OK biobased - Level 4 (ASTM D6866), USDA Certified Biobased Product

Content: 85% Biobased content derived from rapidly renewable plant based resources

Free of: Antimicrobials, Antimony, Bisphenol A (BPA), Chlorine, DMF, Fluorocarbons, Formaldehyde, Halogenated fire retardants, Heavy metals, Ozone-depleting chemicals, PFC, Phthalates, Plasticizers, PVC, Solvents, Stain resistant finishes

Additional Details: Extremely low VOCs, Inherently Antimicrobial - In accordance with Test Method AATCC 147, No topical finishes, Responsible Return Program, Safely Disposable

Colors Quick Ship

Select colors ship from NY in 2 business days, up to 300 yards

800 803 805 806 807 808 809 810

811 812 813 814 815 817 818 819

820 823 830 831 834 835 836 837

838 839 840 841 842 843 844 845

846 847 848 849 850 851 852

HBJ Horizontal Butt Joint Used to stack columns over 12 ft.

VBJ Vertical Butt Joint

1 5/16”

Easy to assemble Column Covers by Móz Designs offers an affordable and quick solution to cover unsightly support structures with over 500 unique Móz Metal Color & Grain combinations

• Pre-rolled & �nished .090” Aluminum

• Varying diameters with vertical butt joints (VBJ)

• Cover any height using stacked segments. (12’ max segment size)

• No joint caulking required for interior applications

• Ready to anchor to metal studs (by others)

• Unique Móz Color & Grain options

STANDARD FEATURES

Vertical Butt Joint

Drop side (key slot attachment to anchor)

Anchor side (fastened to stud)

711 Kevin Court - Oakland, CA 94621 - USA tel: 510.632.0853 fax: 510.632.0852 info@mozdesigns.com www.mozdesigns.com

Móz CC 100 series Round Column Covers Technical Information

TM

rev. 11/2018

5/8” gap for lift and drop

M ax ft.

in o ne p ie ce

Min. diameter 16” Max. diameter 35”

Min. diameter 24” Max. diameter 52”

Min. diameter 48” Max. diameter 70”

3 Sections 4 Sections2 Sections

Metal Stud (by others)

Metal Stud (by others)

Móz CC 100 series Round Column Covers

711 Kevin Court - Oakland, CA 94621 - USA tel: 510.632.0853 fax: 510.632.0852 info@mozdesigns.com www.mozdesigns.com

TM

1” 6”

1 5/16”

RC Recessed Capital/RB Recessed Base 6” Standard height

Recessed Capital + Vertical Butt Joint

Recessed Base + VOR

(Vertical Open Reveal)

Recessed Capital & Base + VOR

Recessed Capital + Vertical Butt Joint

+ HOR

(Horizontal Open Reveal)

Recessed Base + VOR

+ HOR

Recessed Capital & Base + Vertical Butt Joint + HOR

Technical Information

• Open reveals (Horizontal & Vertical)

• Recessed Base and Capital

• 18ga Stainless Steel

• Exterior finishes rev. 11/2018

OPTIONAL ADD-ONS

SAMPLE OF POSSIBLE CONFIGURATIONS:

VOR Vertical Open Reveal Standard 3/4” x 3/4”

HOR Horizontal Open Reveal Standard 3/4” x 3/4”

LA2 SLIM RINGS

09 / 13 / 23 UPDATE 1 / 3

Slim Rings

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

LA2 SLIM

MOUNTING � Fully adjustable stainless steel aircraft cable.

Contact LightArt for lengths over 20′.

CERTIFICATION � CSA approved to UL standards Declare label certified Living Building Challenge compliant Damp rated

WARRANTY � 5 year warranty on all standard components.

LED system rated for operation in ambient environments up to 25°C.

STANDARDS � 6 week lead time 250+ 3form material options (contact LightArt for custom material pricing) TGIC-free powder coat PVC-free power cord

SHADE � 1/32″ thick 3form Varia resin.

White Opal top and bottom diffuser.

LIGHTING � Solid state LED system 120v–277v input 2700K - 4000K 80/90 CRI light source

HARDWARE � Removable TGIC-free powder coated metal lid.

Canopy and dress plate mounts to standard junction box (junction box provided by others).

3/64″ stainless steel cables to ceiling.

Power cord to canopy

DIMMING � Dimming 0–10v

Specifications

Overview

09 / 13 / 23 UPDATE 2 / 3

Slim Rings

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

LA2 SLIM

BLACK WHITE

CANOPY / DRESS PLATE FINISH OPTIONSCEILING HARDWARE Cables to Ceiling

3form Varia

Fixture Options

SHAPES & DIMENSIONS SHADE COLOR OPTIONS

SILKEN

OYSTER

WIZARD

GESSO

CRANBERRY ×2 VITAMIN C

CINDER NATURAL

Due to manufacturing and construction process used to create the Essentials and Connected collection, Pattern+ and wood grains will not match at fixture seams.

Lead times subject to change.

11" x 4.5"

12" x 5.5"

2"

21.5"Dia. x 2.5"D x 2.5"H - 2.5lbs 33"Dia. x 2.5"D x 2.5"H - 4.5lbs

43"Dia. x 2.5"D x 2.5"H - 6lbs

57.5"Dia. x 2.5"D x 2.5"H - 8lbs

09 / 13 / 23 UPDATE 3 / 3

Slim Rings

4770 OHIO AVE S STE B, SEATTLE, WA 98134

LIGHTART.COM206 . 524 . 2223

LA2 SLIM

SPECIFICATION CODE

LA2 SLIM RING

QTY.

Example: 2 QTY LA2 – SLIM – RING – 43D – WZ – 830CK – STD – WPC – WH

1 42 53 6

Complete form to order Slim Ring(s). For each number, make one selection and enter in the corresponding box above.

* Indicates modified choices; additional lead times and/or costs may apply.

21.5D

33D

43D

57.5D

1 SIZE

21.5″ DIA

33″ DIA

43″ DIA

57.5" DIA

WH

BK

CCL

CCN

7 POWER CORDCANOPY OPTION5

WHITE

BLACK

CABLES TO CEILING

CABLES TO CANOPY*

Part Number Specification

GO

NL

CR

SO

CB2

VC

WZ

CUST*

GESSO

NATURAL

CINDER

SILKEN OYSTER

CRANBERRY ×2

VITAMIN C

WIZARD

CUSTOM COLOR

2 MATERIAL

827CK

830CK

835CK

840CK

927CK

3 LED CRI / CCT

80 CRI / 2700K

80 CRI / 3000K

80 CRI / 3500K

80 CRI / 4000K

90 CRI / 2700K

930CK

935CK

90 CRI / 3000K

90 CRI / 3500K

STD

EXT*

4 SUSPENSION

12″—96″

24″—240″

WPC

BPC

CANOPY COLOR6

WHITE

BLACK

TECHNICAL DATA

Wilsonart® Laminate Basic Types 107, 335, 350

© 2020, Wilsonart LLC 1

2501 Wilsonart Dr PO Box 6110 Temple, TX 76503-6110

1. Manufacturer

Wilsonart LLC 2501 Wilsonart Drive P.O. Box 6110 Temple, Texas 76503-6110 Phone: (254) 207-7000; (800) 433-3222 Fax: (254) 207-2384 Web Site: www.wilsonart.com

2. Product Description

Recommended Uses Wilsonart® Laminate, types 107, 335, and 350, is suitable for use on fine quality residential and commercial furniture, fixtures and casework, and for architectural application on columns, wainscoting, valances, cornices, interior doors and divider systems.

General Purpose (HGS) Type 107 is most frequently used for work surfaces on counters, islands, vanities, desks and tables. Typical vertical uses include surfacing for wall panels, teller cages and the front panels of workstations, such as those in hospitals, airports and restaurants. Type 107 is produced for both horizontal and vertical interior applications where the surface must be functional, durable and decorative.

Vertical Surface (VGP) Type 335 is the usual choice to surface cabinet walls, doors and drawer panels. It often appears on the vertical surfaces of desks, restaurants booths and maître d’ stations, and as architectural cladding. Type 335 is intended for vertical applications where a functional, durable, decorative surface must absorb somewhat less impact than a comparable horizontal surface. VGP surfaces may be postformed to achieve radius edges.

Postforming (HGP) Type 350 adds the decorative capability of a soft edge to any typical laminate use.

Common applications of postforming laminates are formed edges for counters, desktops, cabinet doors and drawer panels. Type 350 is intended for use on vertical and horizontal interior surfaces where it is necessary or desirable to roll the laminate on a simple radius over the edge of the substrate. This eliminates seams and leaves an attractive surface.

Wilsonart® HD® finishes feature Antimicrobial Protection that helps inhibit the growth of stain and odor causing bacteria, mold, and mildew on your countertop or surface. Wilsonart’s Antimicrobial Protection won’t wash away or wear off. Premium and Standard finishes are available with Antimicrobial Protection upon request during the ordering process.

Product Composition Decorative surface papers impregnated with melamine resins are pressed over Kraft paper core sheets impregnated with phenolic resin. These sheets are then bonded at pressures greater than 1000 pounds per square inch at temperatures approaching 300°F (149°C). Finished sheets are trimmed, and the backs are sanded to facilitate bonding.

Basic Limitations Wilsonart® Laminate is for interior use only and is not recommended for direct application to plaster, concrete walls, or gypsum wallboard. It is not structural material and must be bonded to a suitable substrate.

© 2020, Wilsonart LLC 2

Do not subject Wilsonart® Laminate to extremes in humidity or temperatures higher than 275°F (135°C) for substantial periods of time, or intense, continuous, direct sunlight.

Patterns & Colors Available in a full range of solid colors, stones, marbles, woodgrains, leathers and patterns. See all designs at www.wilsonart.com. Please see actual sample before specifying.

Finishes Confirm finish availability on individual designs by going to www.wilsonart.com

#01 High Gloss - Premium A mirror sheen finish, which gives a smooth, brilliant appearance. #01-High Gloss finish also features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Can be used for horizontal applications such as countertops and light-to-medium commercial applications. Excellent for vertical applications. Nominal Glossometer Reading = 110 #05 Timbergrain - Premium An overall finish with dimensional low-sheen, realistic ticking and natural variation across the sheet, looks very much like the surface of natural wood veneer. #05 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 4.5 #07 Textured Gloss - Premium A textured finish which reproduces the high sheen of waxed wood furniture. #07 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 42 #12 SoftGrain - Premium A dense wood grain structure that is low gloss and soft to the touch. Subtle highlights of reflectivity randomly occur within the embossed grains, creating a sophisticated raw wood look. #12 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 8 #16 Casual Rustic - Premium A woodgrain texture with a blend of grain variations ranging from linear to subtle movement with random, irregular features. The overall low gloss surface is accented with higher sheen woodgrain ticking and random highlights. #16 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology.

Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 6 #18 Linearity - Premium A directional texture running the length of the sheet, having a narrow, random and matte-gloss linear quality.

It is complementary to linear woodgrains, and linear patterns (such as the “Satin” series), and provides dimension and visual movement to solid colors. #18 finish features AEON™ Enhanced Scratch & Scuff- Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 18 #19 Leno Weave – Premium Random intersecting horizontal and vertical lines create a geometric weave with a matte-gloss finish.

Recommended for horizontal and vertical applications. #19 finish features AEON™ Enhanced Scratch & Scuff- Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 15 #21 Soft Silk – Premium A smooth, ultra-matte finish with a silky, soft touch. This minimalist finish gives the surface a genuine stone feel. Recommended for horizontal and vertical applications. #21 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 8 http://www.wilsonart.com/laminate/design-library

© 2020, Wilsonart LLC 3

#22 Antique - Premium A mixture of varying low gloss features combined with organic movement, indicative of the surface of an aged stone or an antique metal. Antique features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 9 #28 Gloss Line - Premium A linear woodgrain texture with varied widths of narrow grain structures in an alternating mix of matte and gloss surfaces areas. Gloss Line features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology.

Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 5 #35 Mirage-Wilsonart® HD® Subtle variations in matte and gloss finish connect to nature’s own finishes: rough and weathered, smooth and polished. #35 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology.

Recommended for horizontal and vertical applications. Nominal Gloss Reading = 50 #38 Fine Velvet Texture A smooth textured finish with moderate reflective value. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 14 #52 Quarry - Premium Premium finish emulating the “pitted” look of polished natural stone. #52 features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 55 #55 Glaze-Wilsonart® HD® A layering of matte features over a semi-gloss glaze, creates this timeworn effect. #55 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical application. Nominal Gloss Reading = 25 #57 Aligned Oak – Wilsonart® HD® Authentic realism is brought to the surfaces using synchronized texture as each elegantly aged oak design exhibits the natural dimension and feel or real world. #57 finish features AEON™ Enhanced Scratch & Scuff- Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 7 #60 Matte - Standard Textured finish with a moderate reflective quality. Recommended for horizontal and vertical applications.

Nominal Glossometer Reading = 10 #78 FineGrain - Premium The FineGrain premium finish features the polish and luxe of a real wood veneer, with a subtle, narrow grain structure that runs the length of the sheet. #78 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 38 #79 Ridgewood – Premium An overall matte finish with ridged dimensional features creating a linear woodgrain effect. #79 finish features AEON™ Enhanced Scratch & Scuff-Resistant Performance Technology. Recommended for horizontal and vertical applications. Nominal Glossometer Reading = 4.5

NOTE: Nominal Glossometer readings are made at a 60° angle of incidence.

Finish Availability: Not all finishes are available in all patterns and colors. Some finish options have limited size availability. Please check with your Wilsonart representative or consult the pattern availability lookup on our website at www.wilsonart.com, to verify size availability by finish type.

Standard Sheet Widths

36” 48” 60” 914mm 1219mm 1524mm

Standard Sheet Lengths

96” 120” 144” 2438mm 3048mm 3658mm

NOTE: Not all sizes are available from stock; contact your Wilsonart representative for details on local availability. Minimums apply to non-standard designs and finishes in sizes other than 48”x96” and 60”x144”.

Please check with your Wilsonart representative.

© 2020, Wilsonart LLC 4

Thickness and Weight Description 107 335 350

Thickness 0.048” ± 0.005” (1.22mm ± 0.13mm)

0.028” + 0.001 - 0.004” (0.7mm + 0.03 - 0.10mm)

0.039” ± 0.005” (0.99mm ± 0.13mm)

Weight per square foot 0.322# 0.186# 0.260#

3. Technical Data

Physical Properties of General Purpose Laminates ISO 4586 Test Typical Wilsonart Type 107 ISO 4586-3 HGS

Thickness 0.048” ± 0.005” (1.22mm ± 0.13mm)

N/A

Appearance N/A N/A

Light Resistance Slight effect Slight Effect

Cleanability (cycles) 10 10

Stain Resistance Reagents 1-10 Reagents 11-15

No effect Slight effect

Moderate effect

Boiling Water Resistance Slight Effect (Gloss) No Effect (Other Finishes)

Slight Effect (Gloss) No Effect (Other Finishes)

High Temperature Resistance Slight effect Slight Effect (Gloss) No Effect (Other Finishes)

Impact Resistance 65” (1651mm) 31.5” (800mm)

Radiant Heat Resistance 210 seconds > 200 sec.

Dimensional Stability Machine Direction Cross Direction

0.3% 0.7%

1.1% (max.)

1.4% (max.)

Surface Wear Resistance (cycles)

Meets or Exceeds 400 350 (min.)

Formability Not applicable Not applicable

Blistering Not applicable Not applicable

Physical Properties of Vertical Surface Laminates

ISO 4586 Test Typical Wilsonart Type 335 ISO 4586-3 VGP

Thickness 0.028” + 0.001 - 0.004” (0.7mm + 0.03 - 0.10mm)

N/A

Appearance N/A N/A

Light Resistance Slight effect Slight effect

Cleanability (cycles) 10 20 (max.)

Stain Resistance

Boiling Water Resistance Slight Effect (Gloss) No Effect (Other Finishes)

Slight Effect (Gloss) No Effect (Other Finishes)

© 2020, Wilsonart LLC 5

High Temperature Resistance Slight Effect (Gloss) No Effect (Other Finishes)

Slight Effect (Gloss) No Effect (Other Finishes)

Impact Resistance 40” (1016mm) 23.5” (600mm) Radiant Heat Resistance 200 seconds > 200 sec.

Dimensional Stability

0.5% 0.8%

Surface Wear Resistance (cycles) Meets or Exceeds 400 350 (min.)

Formability 5/16” radius (7.93mm) 7/16” radius (11mm) 9/16” radius(14.7mm)

Blistering 45 seconds > 40 seconds

*Radius for face is actually the radius of the form around which the laminate is postformed. The radius for back is actually the radius to which the decorative face is postformed.

Physical Properties of Postforming Laminate

ISO 4586 Test Typical Wilsonart Type 350 ISO 4586-3 HGP

Thickness 0.039” ± 0.005” (0.99mm ± 0.13mm)

0.039” ± 0.005” (1mm ± 0.12mm)

Appearance N/A N/A Light Resistance Slight effect Slight effect Cleanability (cycles) 10 20 Stain Resistance

Boiling Water Resistance Slight Effect (Gloss) No Effect (Other Finishes)

Slight Effect (Gloss) No Effect (Other Finishes)

High Temperature Resistance Slight Effect (Gloss) No Effect (Other Finishes)

Slight Effect (Gloss) No Effect (Other Finishes)

Impact Resistance 55” (1397mm) 31.5” (800mm)

Radiant Heat Resistance 205 seconds > 200 sec.

Dimensional Stability

0.5% 0.8%

Surface Wear Resistance (cycles)

Meets or Exceeds 400 350 (min.)

Formability* *5/16” face (7.93mm) *3/8” back (9.52mm)

*9/16” face (14.27mm) *3/4” back (19.05mm)

Blistering 65 seconds > 40 seconds

*Radius for face is actually the radius of the form around which the laminate is postformed. The radius for back is actually the radius to which the decorative face is postformed.

Typical Fire Test Data High-pressure laminates are subject to flame spread and smoke developed standards in structures where codes establish such conditions.

Test data to determine compliance with these codes are obtained by the Steiner Tunnel Test method of the American Society for Testing Materials (ASTM-E-84, Standard Test Method for Surface Burning Characteristics of Building Materials). Tests were conducted in accordance with test method and mounting procedure as described in paragraph X1.7.2 of the test method. This procedure is cataloged by Underwriters Laboratories, Inc. as UL 723. Here is typical data for Wilsonart® Laminates, averaged from two specific tests:

© 2020, Wilsonart LLC 6

Typical Flame Spread and Smoke Developed Properties Product Type Test Condition Flame Spread Smoke Developed General Purpose Type 107 Unbonded 50 45

Vertical Surface Type 335 Unbonded 45 40

Postforming Type 350 Unbonded 60 35

General Purpose Type 107 Bonded with contact adhesive to particleboard substrate; 3/8” 40 100

Vertical Surface Type 335 Bonded with contact adhesive to particleboard substrate; 3/8” 40 155

Postforming Type 350 Bonded with contact adhesive to particleboard substrate; 3/8” 50 140

When you wish to specify decorative laminate for a Class I or A fire rating, please refer to the Fire-Rated Laminate Tech Data.

Model Code Designations used to determine flame spread classification

Flame Spread Classification (Max. Rating)

International

(IBC)

Life Safety

(NFPA 101)

25 A A 75 B B 200 C C

RE: Architectural Woodwork Quality Standard, 8th Edition, Version 1.0, - 2003

All Model Codes regulate the generation of smoke by interior finish material. In all cases they specify a maximum smoke development rating of 450.

Codes and Certifications

General Standards Wilsonart® Laminates, types 107, 335 and 350, conform to the voluntary standards of the American National Standards Institute, for thickness, performance properties and appearance. Wilsonart® Laminates 107,335 and 350 meet or exceed the International Standards Organization specifications as found in ISO 4586, titled “High-Pressure Decorative Laminate (HPDL) – Sheets Based on Thermosetting Resins – Part I: specifications.”

Specific Product Standards U.S. Federal Specification L-P 508H, April 9, 1977, “Plastic Sheets, Laminated, Decorative and Non-decorative.”

Spells out criteria for decorative laminates for federal installations. Wilsonart 107, 335 and 350 laminates comply.

NSF International (NSF) #35 “Laminated Plastic for Surfacing for Food Service Equipment.” All solid colors and printed patterns in Basic Types 107, 335 and 350, comply.

U.S. Federal Register, August 9, 1984, Housing and Urban Development Mobile Home Construction and Safety Standard, (24CFR) 3280.203. General Purpose Type 107 and Vertical Surface Type 335 comply.

U.S. Federal Test Method, Federal Aviation Regulation, DOT, Part 25.853, Airworthiness Standards: Transport Category Airplane (Interior Finish). Vertical Surface Type 335 and Postforming Type 350 comply with parts A and C.

U.S. Federal Motor Vehicle Safety Standard (FMVSS) 302, “Flammability of Interior Materials.” Basic Types 107, 335 and 350 comply.

U.S. Military Standard MIL-P-17171E (SHIPS)/Plastic Laminate. General Purpose Type 107 complies.

© 2020, Wilsonart LLC 7

Branded Cleaner and Sanitizer Resistance for Wilsonart® Laminate per ISO 4586-2 Method 31 (B) No effect was exhibited except as noted (* or **) on the following:

1. Beckart Environmental (Stabilized Chlorine Dioxide Mixed with Water at 3000ppm)

2. Benefect®

3. Claire® Germicidal Cleaner (Country Fresh Scent)

4. Claire® Disinfectant Spray Q (Country Fresh Scent)

5. Clean Republic – All Purpose Everyday Cleaner (Hypochlorous Acid – 0.003% Solution)

6. Clorox® Anywhere® Hard Surface Sanitizing Spray*

7. Clorox® Clean-Up (Cleaner & Bleach)

8. Clorox® Disinfecting Bleach w/6% Sodium Hypochlorite (24:1/Water:Bleach)

9. Clorox® Disinfecting Spray

10. Clorox® Disinfecting Wipes

11. Clorox Healthcare® Bleach Germicidal Cleaner *

12. Clorox Healthcare® Hydrogen Peroxide Cleaner Disinfectant

13. Clorox Healthcare® Fuzion® Cleaner Disinfectant*

14. Clorox Healthcare® VersaSure® Cleaner Disinfectant Wipes

15. Clorox® Total 360 Disinfectant Cleaner

16. Diversey™ Expose® II 256

17. Diversey™ Oxivir 1

18. Diversey™ Oxivir Tb Wipes

19. Diversey™ Stride® Floral Neutral Cleaner

20. Diversey™ Virex® II 256

21. Fabuloso® Complete (Multi-Purpose Cleaner)

22. Lysol® Professional Disinfectant Spray

23. Microban® 24 Hour (Multi-Purpose Cleaner)

24. PDI Sani-Prime® Germicidal Spray

25. PDI Super Sani-Cloth® Germicidal Disposable Wipes

26. Purell® Advanced Hand Sanitizer Gel

27. Purell® Food Service Surface Sanitizer

28. Purell® Professional Surface Disinfectant

29. Purell® Healthcare Surface Disinfectant

30. Simple Green® Concentrated (All-Purpose Cleaner)

31. Spic and Span® Everyday (Antibacterial Cleaner)

Test procedure: Listed materials were placed in contact with Wilsonart® Laminate surface under 1" (25.4mm) diameter watch cover glass for 16 hours duration prior to evaluation for effect. The branded cleaners and sanitizers listed above were cleaned with water only.

* Causes slight change of gloss or color.

** Causes slight damage, with degree of damage proportionate to length of exposure and concentration.

Branded Cleaner and Sanitizer Resistance for Wilsonart® Laminate per BIFMA HCF 8.1-2014 (Section 6 / Modified) No effect was exhibited except as noted (* or **) on the following:

1. Beckart Environmental, Inc. (Stabilized Chlorine Dioxide Mixed with Water at 3000ppm)

2. Benefect®

3. Claire® Germicidal Cleaner (Country Fresh Scent)

4. Claire® Disinfectant Spray Q (Country Fresh Scent)

5. Clean Republic – All Purpose Everyday Cleaner (Hypochlorous Acid – 0.003% Solution)

6. Clorox® Anywhere® Hard Surface Sanitizing Spray

7. Clorox® Clean-Up (Cleaner & Bleach)

8. Clorox® Disinfecting Bleach w/6% Sodium Hypochlorite (24:1/Water:Bleach)

9. Clorox® Disinfecting Spray

10. Clorox® Disinfecting Wipes

11. Clorox Healthcare® Bleach Germicidal Cleaner

12. Clorox Healthcare® Hydrogen Peroxide Cleaner Disinfectant

© 2020, Wilsonart LLC 8

13. Clorox Healthcare® Fuzion® Cleaner Disinfectant

14. Clorox Healthcare® VersaSure® Cleaner Disinfectant Wipes

15. Clorox® Total 360 Disinfectant Cleaner

16. Diversey™ Expose II 256

17. Diversey™ Oxivir 1

18. Diversey™ Stride® Floral Neutral Cleaner

19. Diversey™ Tb Wipes

20. Diversey™ Virex II 256

21. Fabuloso® Complete (Multi-Purpose Cleaner)

22. Lysol® Professional Disinfectant Spray

23. Microban® 24 Hour (Multi-Purpose Cleaner)

24. PDI Sani-Prime® Germicidal Spray

25. PDI Super Sani-Cloth® Germicidal Disposable Wipes

26. Purell® Advanced Hand Sanitizer Gel

27. Purell® Food Service Surface Sanitizer

28. Purell® Professional Surface Disinfectant

29. Purell® Healthcare Surface Disinfectant

30. Simple Green® Concentrated (All-Purpose Cleaner)

31. Spic and Span® Everyday (Antibacterial Cleaner)

Test procedure: Listed reagent materials were placed in contact with Wilsonart® Laminate surface with a one-inch square 100% cotton cloth completely saturated and covered with a 2” (50.8mm) diameter watch cover glass for 15 minute duration. The reagents listed above were removed with clean cloth and the area was then cleaned with clean cloth and distilled water only. The surface area was allowed to dry for 1-hour prior to evaluation for effect.

* Causes slight change of gloss or color.

** Causes slight damage, with degree of damage proportionate to length of exposure and concentration.

Resistance of Furniture to UV Lights for Wilsonart® Laminate per BIFMA HCF 8.1-201X Section 9 (Alternate Method per ASTM G155 using ISO 4586-2.33 conditions).

Wilsonart® Laminates 107,335,350 and 376 conforms to BIFMA – Healthcare Furniture Design Guidelines for Cleanability, Section 9 Resistance to Furniture to UV Lights. Wilsonart® Laminates 107, 335, 350 and 376 meet or exceed the acceptance level for surface evaluation.

4. Installation: Fabrication and Assembly Recommendations

Fabrication should follow approved methods. Assembled pieces should meet the specifications of KCMA (Kitchen Cabinetmakers Manufacturers Association), ANSI A-161.2-1998 (revised), and “Architectural Woodwork Quality Standards, Guide Specifications and Quality Certification Program” guidelines of the Architectural Woodwork Institute where applicable.

Wilsonart® Laminates must be bonded to a substrate of reliable quality, such as particleboard, medium density fiberboard or plywood with one A-face. High-Pressure Laminate, plaster, concrete and gypsum board should not be considered suitable substrates. Basic Types laminate may not be used as structural members.

Bond with adhesives and follow the techniques recommended by the adhesive manufacturer. Recommended adhesives are permanent types, such as urea and polyvinyl acetate (PVA), and contact types. Wilsonart adhesives are recommended for most bonding conditions.

To avoid stress cracking, do not use square-cut inside corners. All inside corners should have a minimum of 1/8” (3.175mm) radius and all edges should be routed smooth.

Drill oversized holes for screws or bolts. Screws or bolts should be slightly countersunk into the face side of a laminate-clad substrate.

Take care to ensure an appropriate acclimation between the laminate and the substrate prior to fabrication.

The face and backing laminates and the substrate should be conditioned in the same environment for 48

© 2020, Wilsonart LLC 9 hours before fabrication. Recommended conditioning temperature is about 75°F (24°C). Laminates should be conditioned at 45% to 55% relative humidity.

With postforming machinery, Wilsonart® Laminate types 335 and 350 will postform at a nominal sheet temperature range of 325°F to 338°F (163°C to 170°C) in 20 ± 5 seconds.

Carbide-tipped saw and router blades should be used for cutting. High tool speed and low feed speed are advisable. Cutting blades should be kept sharp. Use a hold-down to prevent any vibration.

5. Warranty

6. Maintenance

7. Technical Services

For samples, literature, questions or technical assistance, please contact our toll-free Hotline at (800) 433- 3222, Monday through Friday, 8 am – 5 pm, CST.

Specification Form:

Surface shall be Wilsonart Laminate, produced by Wilsonart LLC, Temple, Texas 76503-6110

Type: Specify 107, 335 or 350

Surfa…