07.08_AE402 - CASEWORK ELEVATIONS.pdf

TW320TW320 TW406c TW305

TW120a

TW810

TW210c

TW501b

TW501a

TW316

TW406b

2' - 0" 2' - 0" 2' - 0"

/2

/2

/2

/2

TW326TW320TW320 TW406a

TW120a

TW128

TW700

TW810

TW210c

TW130 TW310

TW230

TW232

6' - 0"

TW242

2' - 0" 2' - 0" 2' - 0"

TW402cTW120b TW120b TW406d TW406c TW406cTW300

TW232 TW230 TW128

TW326

TW141

TW312

TW210d

TW242

6" 5'

/2

1'

/4

1' - 6" 1' - 6" 1' - 6" 1' - 6" 2' - 0" 2' - 0" 2' - 0"

TW406dTW326

TW128

TW700

TW230

TW232 TW310

TW210a

TW120a

TW810

TW120a

TW402a

2' - 0" 2' - 0"

/4

/2

/4

1'

/8

5'

/8

6"

TW406cTW406d

TW120b

TW141

TW210b

TW312

TW326 TW300TW128

TW700

TW230TW232TW242

1'

/4

1/

8" 4'

/8

6"

1' - 6" 1' - 6" 2' - 0" 2' - 0"

TW406dTW402a

TW120a

TW326

TW128

TW700

TW230

TW232TW310

TW120a

TW210a

TW242

TW810

2' - 0 3/8" 1' - 11 5/8"

/2

/2

C A S E W O R K G E N E R A L N O T E S

A. REFER TO THE EQUIPMENT LIST ON QT403 FOR MORE INFORMATION RELATED TO EQUIPMENT.

B. BACKSPLASH FOLLOWS PARTITION BEYOND AND SHALL ALWAYS TURN THE CORNER

PARTITIONS WHEN THOSE ALSO TURN THE CORNER.

C. PROVIDE FINISHED END PANELS WHERE CABINET END IS EXPOSED TO VIEW, AT KNEE SPACES, AND WHERE CABINET ENDS ABUT UNDERCOUNTER APPLIANCES. MATCH ADJACENT CASEWORK

FINISH UNLESS NOTED OTHERWISE.

D. FIELD VERIFY QUANTITY AND LOCATION OF GROMMETS PRIOR TO FABRICATION.

E. PROVIDE FILLER PANELS TO CLOSE GAPS BETWEEN CABINET UNITS AND ABUTTING WALLS.

MATCH CABINET FINISH.

F. REFERENCE AE402 FOR COMPASS CASEWORK SCHEDULE.

G. REFERENCE AE403 FOR STANDARD CASEWORK SYMBOL AND TYPOLOGY LEGEND.

BUILDING 200

PLASTIC LAMINATE BASE (PL-2); SCRIBE TO

FLOOR

SOLID SURFACE COUNTERTOP (C-1); SCRIBE TO

WALL. REFER TO ELEVATIONS AND FINISH

SCHEDULE FOR SPECS

ALL INTERIOR SURFACES TO BE MELAMINE

FACE OF PARTITION

FRT BLOCKING AS REQUIRED (TYP)

ALL EXTERIOR SURFACES TO BE 3/4" MDF W/ HIGH

PRESSURE LAMINATE. REFER TO ELEVATIONS FOR

LAMINATE TYPE

SCHEDULED WALL TILE , SEE ELEVATIONS

DOOR PULL AS SCHEDULED

2' - 0" U.N.O.

ADJUSTABLE 3/4" MELAMINE SHELVES

CONCEALED HINGE

AE402

PARTITION AS SCHEDULED

SECURE TO BACKING PLATE AS REQUIRED

SECURE TO BACKING PLATE AS REQUIRED

SOLID SURFACING COUNTER (C-1)

DOOR PULL:

DOUG MOCKETT DP105B/17S,

SATIN NICKEL

FRT BLOCKING AS REQ'D, FINISH EXPOSED

FACE

ALL EXPOSED SURFACES TO BE

FINISHED; MATCH FACE OF DOOR

PLASTIC LAMINATE BASE (PL-2); SCRIBE TO

FLOOR

SOLID SURFACE COUNTERTOP (C-1); SCRIBE TO

WALL. REFER TO ELEVATIONS AND FINISH

SCHEDULE FOR SPECS

ALL INTERIOR SURFACES TO BE MELAMINE

FACE OF SCHEDULED PARTITION

FRT BLOCKING AS REQUIRED (TYP)

ALL EXTERIOR SURFACES TO BE 3/4" MDF W/ HIGH

PRESSURE LAMINATE. REFER TO ELEVATIONS FOR

LAMINATE TYPE

SCHEDULED WALL TILE, SEE ELEVATIONS

2' - 0" U.N.O.

CABINETRY BEYOND

BLOCKING AS REQUIRED

/2

/2

PARTITION AS SCHEDULED

SECURE TO BACKING PLATE AS REQUIRED

SECURE TO BACKING PLATE AS REQUIRED

REFER TO PARTITION TYPES FOR DETAIL

INTEGRATED PLASTIC LAMINATE (PL-2) TOE KICK

SOLID SURFACE COUNTERTOP (C-1); SCRIBE TO

WALL. REFER TO ELEVATIONS AND FINISH

SCHEDULE FOR SPECS

ALL INTERIOR SURFACES TO BE MELAMINE

FACE OF PARTITION

FRT BLOCKING AS REQUIRED (TYP)

ALL EXTERIOR SURFACES TO BE 3/4" MDF W/ HIGH

PRESSURE LAMINATE.

SCHEDULED WALL TILE, SEE ELEVATIONS

DOOR PULL

CONCEALED HINGE

2' - 0" U.N.O.

AE402

SCHEDULED SINK AND FAUCET, SEE PLUMBING SPEC

PARTITION AS SCHEDULED

SECURE TO BACKING PLATE AS REQUIRED

SECURE TO BACKING PLATE AS REQUIRED

FLOATING HEAVY DUTY COUNTERTOP

SUPPORT BRACKET AT 24" O.C.

STARTING 12" OFF CENTER WIDTH

FIELD CUT GROMMETS - SEE

PLAN FOR LOCATION

INTEGRAL SOLID SURFACE (C-1)

COUNTERTOP AND 4" BACKSPLASH.

REFER TO FLOOR PLAN FOR WALL TYPE.

3/4" PLYWOOD SUBSTRATE

24" U.N.O.

CONCEALED BRACKETS

PLASTIC LAMINATE BASE (PL-2); SCRIBE TO

FLOOR

1' - 3"

PROVIDE FRT WOOD BLOCKING AS

REQUIRED IN STUD TO SUPPORT WALL

CABINET. TYP.

PLASTIC LAMINATE WALL CABINET BODY

WITH ADJUSTABLE SHELVES; SHELF

STANDARDS, RECESSED FOR FLUSH

INTERIORS AT 5/8" INCREMENTS.

CONSTRUCTION TO HAVE CONCEALED

FASTENERS

2 X 2 CONTINUOUS ANODIZED

ALUMINUM ANGLE

T Y

P

IC

A L

/2

1' - 3"

PROVIDE FRT WOOD BLOCKING AS

REQUIRED IN STUD TO SUPPORT WALL

CABINET. TYP.

PLASTIC LAMINATE WALL CABINET BODY

WITH ADJUSTABLE SHELVES; SHELF

STANDARDS, RECESSED FOR FLUSH

INTERIORS AT 5/8" INCREMENTS.

CONSTRUCTION TO HAVE CONCEALED

FASTENERS

2 X 2 CONTINUOUS ANODIZED

ALUMINUM ANGLE

T Y

P

IC

A L

/2

FABRICATED METAL CAP BY

CASEWORK MANUFACTURER.

CONTINUOUS SEALANT

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

VA FORM 08 - 6231

A

FULLY SPRINKLERED

U.S. Department of Veterans Affairs

B

C

D

E

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT

321 4 5 6 7 8 9 10

1100 Boulders Pkwy | Suite 503 Richmond, VA 23225

804.355.2067

A u to d e s k D o c s /M t H o m e

I s o la ti o n W a rd

D

/F F

E

M t H o m e

D rv t

/1

/2

:0

:1

P

M

AE402

CASEWORK ELEVATIONS

11/04/2022 PQ TD

RENOVATE D-WING FOR ISOLATION

WARD

621-20-107

MOUNTAIN HOME, TENNESSEE

BID DOCUMENTS

JAMES H.

QUILLEN VA

MEDICAL

CENTER

Approved: MT Home VA

1/2" = 1'-0"

ANTEROOM CASEWORK - LINEN AND TRASH

1/2" = 1'-0"

ANTEROOM CASEWORK - SINK

1/2" = 1'-0"

ISO ROOM CASEWORK - FOOTWALL TYPE 'A'

1/2" = 1'-0"

ANTEROOM CASEWORK - SMALL SPLIT SINK

1/2" = 1'-0"

ISO ROOM CASEWORK - 'B' FOOTWALL TYPE

COMPASS CASEWORK SCHEDULE

TYPE MARK CASEWORK ITEM COUNT

TW120a FACE TILE: 20"H X 24"W 48

TW120b FACE TILE: 20"H X 36"W 16

TW128 ABOVE SINK TILE: 20"H X 24"W 24

TW130 LINEN CART TILE: 24"H X 24"W 6

TW141 UTILITY TILE: 20"H X 36"W 16

TW210a WORK SURFACE W/ BACKSPLASH: 13"D X 24"W

TW210b WORK SURFACE W/ BACKSPLASH: 13"D X 36"W

TW210c WORK SURFACE W/ BACKSPLASH: 13"D X 48"W

TW210d WORK SURFACE W/ BACKSPLASH: 13"D X 72"W

TW230 SINK:13"D X 24"W 24

TW232 SINK ENCLOSURE: 13"D X 24"W 24

TW242 SIDESPLASH: 3"H X 13"W 22

TW300 WARDROBE CABINET WITH DRAWER:

63-1/2"H X 13"D X 24"W

TW305 HALF HEIGHT STORAGE CABINET: 63-1/2"H X

13"D X 24"W

TW310 3 DRAWER MODULE: 18"H X 13"D X 24"W 12

TW312 LOWER STORAGE CABINET: 18"H X 13"D X

36"W

TW316 WASTE RECEPTACLE CABINET: 33"H X 13"D

X 24"W

TW320 UPPER STORAGE CABINET: 20"H X 9"D X

24"W

TW326 GLOVE PAPER COMBO CABINET: 20"H X 9"D

X 24"W

TW402a NO CANOPY TOP: 24"W 6

TW402b NO CANOPY TOP: 36"W 8

TW402c NO CANOPY TOP: 72"W 4

TW406a SLOPED CABINET TOP: 9"D X 72"W 6

TW406b SLOPED CABINET TOP: 9"D X 48"W 12

TW406c SLOPED CABINET TOP: 13"D X 24"W 28

TW406d SLOPED CABINET TOP: 9"D X 24"W 18

TW501a CLEAN LINEN CART: 37"H X 13-1/2"D X 24"W 12

TW501b SOILED LINEN CART: 37"H X 13-1/2"D X 24"W 12

TW700 ACCESSORY RAIL: 24"W 30

TW810 DISPLAY SHELF: 24"W 24

1/2" = 1'-0"

ANTEROOM CASEWORK - SMALL SINK

NTS

KEYPLAN

1 1/2" = 1'-0"

MILLWORK - SECTION - BASE CAB.

6" = 1'-0"

MILLWORK - PULL HANDLE & COUNTER EDGE

1 1/2" = 1'-0"

MILLWORK - SECTION - BASE CAB. SHELVING

1 1/2" = 1'-0"

MILLWORK - SECTION - BASE CAB. SINK - SS

1 1/2" = 1'-0"

MILLWORK - SECTION - OPEN OVERHANG

No. Revisions: Date:

BID DOCUMENTS 11/04/2022

2 ADDENDUM #2 07/13/2023

1 1/2" = 1'-0"

MILLWORK - SECTION - WALL CABINET WITH BULKHEAD

1 1/2" = 1'-0"

MILLWORK - SECTION - WALL CABINET WITH SLOPPED TOP