2024-12-03_HAZARDOUS AND UNIVERSAL WASTE POLICY.pdf
PDF 398 KB Posted
- Solicitation number
- 36C24426R0088
About this file
Hazardous and Universal Waste Policy
This document is a Medical Center Policy (MCP 138-26) for the Corporal Michael J. Crescenz VA Medical Center in Philadelphia, Pennsylvania, establishing systematic procedures for handling, storing, and disposing of hazardous, non-hazardous, and universal waste in compliance with EPA and VA regulations. The policy, effective December 17, 2020, with recertification due December 31, 2025, designates the Chief of Facilities Management Services as the responsible owner and requires strict adherence to federal, state, and local environmental protection standards. Administrative officers and service chiefs must establish written hazardous waste management procedures for their departments, including guidelines for waste identification, minimization strategies, chemical substitution, and proper container labeling. The Safety Office, specifically the GEMS Coordinator, maintains primary responsibility for approving hazardous waste contractor analytical work, conducting weekly inspections of waste storage areas, managing disposal service contracts, maintaining disposal records, and reporting to the EPA and Pennsylvania Department of Environmental Protection.
The policy mandates that hazardous waste be identified using characteristics outlined in Appendix A (ignitability, corrosivity, reactivity, and toxicity) or by reference to listed chemicals in Appendix B. All hazardous waste must be collected in compatible, properly labeled containers and transported to designated storage areas only by licensed transporters; personal vehicle transport is prohibited. Acute hazardous waste (P-listed chemicals) requires pre-approval and double containerization, with strict limits of one kilogram per month generation. Universal waste such as batteries, fluorescent lamps, thermostats, and mercury-containing devices are managed separately under specific accumulation time limits. The policy emphasizes waste reduction through substitution, amount reduction, chemical exchange, and recycling where feasible, with on-site neutralization and chemical deactivation as preferred disposal methods when applicable. Spills require immediate notification and cleanup per Medical Center Policy 138-33, with cleanup materials treated as hazardous waste.
View the file
Other files
Show all 44
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HAZARDOUS AND UNIVERSAL WASTE POLICY
MCP: 138-26
Corporal Michael J. Crescenz VA Medical Center Philadelphia, Pennsylvania 19104
Signatory Authority:
Karen Flaherty-Oxler, MSN, RN Medical Center Director
Responsible Owner:
Chief of Facilities Management Services
Rescinded Document:
MCM 138-26 dated, August 2018
Effective Date:
December 17, 2020
Recertification Date:
December 31, 2025
1. POLICY: To provide for a systematic and uniform program of handling, storing, and disposing of hazardous, non-hazardous, and universal waste produced by the station as required by the U.S. Environmental Protection Agency (EPA) and the Department of Veterans Affairs (VA) at the Corporal Michael J. Crescenz Department of Veterans Affairs Medical Center (CMCVAMC)
2. JUSTIFICATION:
A. Due to the stringent regulations and liabilities of a hazardous waste generator, the CMCVAMC should produce daily, the absolute minimal amount of hazardous waste.
B. All hazardous waste produced at this station shall be disposed of according to VA, EPA and PA Department of Environmental Protection procedures. Disposal of hazardous waste by any other means (i.e., via the sewer system or land dumping) is illegal and the facility is potentially subject to very large fines by the EPA. Improper storage of hazardous waste, leading to spills or leakage, also subjects the facility to potentially large fines.
C. Any employee and their supervisor who knowingly, illegally dispose of hazardous waste are liable, and are also potentially subject to fines and/or imprisonment.
D. Contractors and Outside Agencies: While working on VA property must be in compliance with all Federal, State and Local regulations, as well as VA.
E. Infectious Waste is covered under a separate protocol and policy.
F. Radioactive Waste is covered under a separate policy and protocol (MCM No. 11-15 Radioactive Waste Policy). Mixed Waste is waste that is both radioactive and hazardous. Refer to Section 8.I. for additional information.
December 17, 2020 MCP 138-26
3. RESPONSIBILITIES:
A. Director: It is the responsibility of the Director to enforce all VA, U.S.
Environmental Protection Agency (U.S. EPA), Pennsylvania Department of Environmental Resources, and U.S. Department of Transportation (U.S. DOT) regulations applicable to the handling, storage, transportation and disposal of hazardous waste generated at this station.
B. Safety Office: It is the responsibility of the GEMS Coordinator within the Safety Office, for the following:
(1) Aiding services in determining hazardous waste.
(2) Establishing procedures for the identification, collection, storage, and disposal of all hazardous waste.
(3) Approving analytical work conducted by the hazardous waste contractor in the characterization of unknown waste.
(4) Inspecting the hazardous waste storage cage and the containers within on a weekly basis and maintaining a log of these inspections.
(5) Aiding the responsible service in the cleanup of hazardous waste spills.
(6) Maintaining hazardous waste contractor, transporter and disposal services.
(7) Assisting services in obtaining recycling services.
(8) Maintaining records of storage and disposal of hazardous waste and classification of generator status.
(9) Reporting to EPA and to the PA DEP.
C. Administrative Officers and Service Chiefs:
(1) Are responsible for the safe handling, control and proper disposal of all hazardous chemicals used, and wastes generated within their Product Lines.
(2) Shall ensure that all procedures generating hazardous wastes are reviewed for substitution of less hazardous chemicals and materials or procedures. Minimal amounts of hazardous chemicals are to be ordered, with emphasis on recycling, reuse and recovery.
(3) Are responsible for establishing written Hazardous Waste Management Procedures, using this policy as a guideline and implementing procedures for the following:
a. Guidelines in determining if generated waste meets the criteria of hazardous waste.
b. Guidelines in determining methods of decreasing the amount of hazardous waste produced.
c. Guidelines for limiting the amounts of acute hazardous waste produced and for complying with the pre-approval requirements for use of these chemicals.
d. Procedures for the proper collection and storage of hazardous waste according to the station policy. It is the responsibility of the using service to correctly collect and label hazardous waste and to transport hazardous waste to the storage area. Appropriate protective equipment and training is to be provided to employees handling hazardous waste.
e. Guidelines specifying types of containers to be used in collecting hazardous waste and types of waste to be added.
Containers must be marked with the Service, and identification of waste (do not use abbreviations).
f. Maintaining current inventories of hazardous waste generated within the Service.
g. Guidelines specifying dangers in mixing or storing chemicals that are not compatible. This should be specific for the chemicals used within the service.
h. Guidelines specifying method and frequency of transporting hazardous waste to the storage area.
i. Guidelines specifying procedures for the cleanup and notification of hazardous waste spill.
D. Supervisors are responsible for the following:
(1) Enforcing the hazardous waste policy and procedures.
(2) Adequately checking waste by the above methods to determine if waste is hazardous according to the policy.
(3) Ensuring that employees properly dispose of hazardous waste.
E. Employees are responsible for adhering to the hazardous Waste policy and procedures.
F. IDENTIFICATION OF HAZARDOUS WASTE:
(1) Purpose: To provide a uniform method of determining if waste is hazardous waste according to regulations provided by the U.S. EPA and the PA DEP.
(2) Method: The following methods will be used by every service for the determination of hazardous waste. The GEMS Coordinator can assist with questions concerning the determination of whether waste is hazardous or not.
(3) Appendix A: A list of characteristics of hazardous waste. If waste being discarded has one or more of these characteristics, the waste is considered hazardous and must be disposed of in accordance with this policy. Appropriate literature, such as an SDS (Safety Data Sheet), product literature, a statement from the supplying company on letterhead, or scientific literature may be used to determine the characteristics of the waste. Services are required to produce literature upon request of the Safety and Occupational Health Office or U.S. EPA that will support the classification of waste.
Examples are as follows:
COMPOUND IGNITIBLE CORROSIVE REACTIVE TOXIC
Sulfuric Acid(pH
1.9)
X
Sodium
Hydroxide(pH
13.0)
X
Ethyl Alcohol X
Lithium
Aluminum
Hydride
X
Silver Nitrate
Solution
(10 milligrams/ liter)
X
(4) Appendix B: A list of chemicals that are hazardous waste when discarded. The letter “U” before the number code indicates that the waste is a listed waste. The letter “P” before the number code indicates that the waste is an acute listed waste. If waste being discarded contains one or more of these chemicals, the waste is considered hazardous and must be disposed of in accordance with this policy. Safety Data Sheets, product literature, or a statement from the supplying company on letterhead may be used to determine the contents of the waste.
(5) Manufacturer: The manufacturer may be called by the service to determine if the material is considered a hazardous waste according to the policy. If this information is used to determine the hazardous waste status of the material, the services are required to obtain, and maintain on file, a written statement on company letterhead.
(6) Unknown Compounds: Chemicals, the contents of which are unknown, cannot be accepted for disposal and will require a chemical waste assay. This assay is a test to determine the contents of the substance so that it can be classified in accordance with EPA criteria and Department of Transportation guidelines for proper disposal. Costs of the chemical assay will be borne by the using service or Principal Investigator.
G. Residues of Hazardous Waste in Empty Containers: The following hazardous waste is not subject to hazardous waste regulations:
(1) A container or an inner liner removed from a container that has held any hazardous waste, except a waste that is a compressed gas or that is identified as an acute (P-listed) hazardous waste, is not regulated if:
a. All wastes have been removed that can be removed using the practices commonly employed to remove these materials from that type of container, (e.g., pouring, pumping, etc.).
b. No more than 2.5 centimeters (one inch) of residue remains on the bottom of the container or inner liner.
c. No more than 3 percent by weight of the total capacity of the container remains if the container is less than or equal to 110 gallons in size, or no more than 0.3 percent by weight of the total capacity of the container remains in the container or inner liner if the container is greater than 110 gallons in size. No waste may be diluted to 3 percent or less, other than during normal operations, to dispose of hazardous waste.
(2) A container that has held a hazardous waste that is a compressed gas is not regulated when the pressure in the container approaches atmospheric.
(3) A container, or an inner liner removed from a container, that has held an acute hazardous waste listed in Appendix B is not regulated if:
a. The container or inner liner has been triple rinsed using a solvent or solution capable of removing the chemical.
b. In the case of a container, the inner liner that prevented contact of the chemical with the container has been removed.
H. Antineoplastic Drugs - Some antineoplastic compounds are listed in Appendix B in the non-acute (U listed) waste. They are as follows:
Chlorambucil UO35
Chlornaphazine U097
Cyclophosphamide U058
Daunomycin UO59
Melphalan U150
Methylthiouracil U164
Mitomycin C U010
Streptozotocin U206
Uracil Mustard U237
I. All unused bulk anti-neoplastic compounds that are listed above shall be treated as hazardous waste and shall be disposed of as such.
J. Unlisted chemotherapeutic waste is a separate waste stream from hazardous waste. Containers specifically made for chemotherapeutic waste shall be used. Environmental Management Services will transport this waste to the infectious waste storage area for pick up by the licensed infectious/chemotherapeutic waste vendor.
4. PROCEDURES:
A. PROCEDURES FOR REDUCING HAZARDOUS WASTE:
(1) Purpose: Limiting the amount of chemicals in the facility will decrease the burden of disposing of hazardous waste. Chemicals that are not completely used will eventually have to be properly disposed.
(2) The following methods should be used in every available situation:
a. Substitution: Replace the chemical in use by a chemical that is not, or will not produce, a hazardous waste.
b. Amount Reduction: Reduce the amount of the chemical production from macro to micro amounts.
c. Reducing Chemical Purchases: Chemicals not completely used must eventually be disposed. Order no more than can be completely used in the process or reaction.
d. Chemical Exchange: Chemical purchases can be reduced by borrowing and sharing unused portions of chemicals between shops, laboratories, etc.
e. Recycling: Where possible, hazardous wastes are to be recycled for reuse by the service, or sale to a licensed hazardous waste recycling contractor. The Industrial Hygienist will assist Services in obtaining a recycling contractor. Manifests for recycled wastes must be forwarded to the Industrial Hygienist for reporting to regulatory authorities. Examples of hazardous wastes that can be recycled include xylene, lead and mercury.
B. PROCEDURES FOR DISPOSAL OF HAZARDOUS WASTE:
(1) Purpose: To properly eliminate the hazardous waste on site after the chemical has been used.
(2) Method: The following methods should be used when applicable:
a. Neutralization: Acids and bases should be neutralized in the laboratory to a pH between 5.5 and 12.5 prior to discharge to the sewer. Diluted solutions of acids and bases may be sewer without neutralization in small amounts with copious amounts of running water to flush the drain system.
b. Chemical Deactivation: Small amounts of hazardous waste should be chemically altered to produce a non-hazardous waste if possible. Non-hazardous waste may then be disposed of by a normal method of chemical disposal.
c. Collection for Contractor Removal and Disposal: Hazardous or universal waste that cannot be PROPERLY treated and disposed of on station or recycled, MUST be properly collected and stored by the using Service, and transported to the Hazardous Waste storage area in the case of hazardous waste. In the case of universal waste, this should be a secure area where waste is not subject to damage or theft. An appointments must be made with the GEMS Coordinator (extension 6097) prior to bringing waste to the storage area. The following forms shall be utilized:
Appendix C “Hazardous Material Waste Disposal Form” and Appendix D “Universal Waste Disposal Form.” When waste is ready for drop off to the waste cage, the form will accompany the waste. It will be reiterated here that mercury-containing devices are hazardous waste in the state of Pennsylvania and New Jersey and must be collected as such.
C. PROCEDURES FOR COLLECTION OF HAZARDOUS AND
UNIVERSAL WASTE FOR DISPOSAL:
(1) Purpose: To provide for a consistent and uniform method of collecting waste for storage prior to removal from the VA facility, by contractor, to an approved Treatment, Storage and Disposal facility.
(2) Method: Hazardous waste that cannot be disposed of or recycled shall be collected for disposal, in containers compatible with the waste. All containers shall be clearly labeled as hazardous waste, and the contents identified. Different chemical types of hazardous wastes shall not be mixed together in one container (e.g., ignitable and reactive). Provisions should be made for all wastes to be collected separately for disposal.
EXTREME CAUTION SHOULD BE TAKEN SO THAT INCOMPATIBLE
WASTE SHALL NOT BE MIXED.
(3) Waste Containers:
a. Condition of containers: If a container holding hazardous waste is not in good condition, or if it begins to leak, transfer the hazardous waste from this container to a container that is in good condition.
b. Labeling the Containers.
i. Every container of hazardous waste must be labeled. Hazardous waste labels are available by contacting the GEMS Coordinator. Federal regulations require that any hazardous waste being accumulated in a satellite area is placed in a container labeled as hazardous waste. The containers that are used must be unapproved containers. Containers placed in a storage area (including<90 days) must, according to Federal regulations, require containers have the proper labels in a storage area.
Information required includes type of waste, waste codes, and date placed in storage area, not the date accumulation was started.
ii. Universal Waste. Individual devices or containers of devices must be labeled as universal waste. Universal waste labels are available by contacting the GEMS Coordinator.
The date the waste was generated must be included on the label. In addition, the type of universal waste must be specified according to the following as applicable:
1) Lamp (s)
2) Mercury-containing device(s) (Pennsylvania only)
3) Mercury thermostat(s)
4) Batteries
5) Pesticides
(4) Compatibility of Waste with Container: The using Service must collect the hazardous waste in a container made of, or lined with, materials which are compatible with the hazardous waste to be stored, so that the ability of the container to contain the waste is not impaired.
Containers, for use are to be supplied by the Service generating the waste.
(5) Management of Containers: A container holding hazardous waste must always be closed during storage, except when it is necessary to add or remove waste. A container holding hazardous waste must not be opened, handled, or stored in a manner that may rupture the container or cause it to leak.
(6) Inspections: The containers for hazardous waste must be inspected once a week by the generator in satellite areas (i.e. laboratories, shops, etc.) for leaks and for deterioration caused by corrosion or other factors.
(7) Transporting to the Hazardous Waste Storage Area: Containers will be transported to the storage area in a manner causing the least possibility of a spill. Carts with rails are recommended. For small quantities appropriate carrying containers are necessary.
(8) Transporting of Hazardous Waste off the facility by anyone other than a licensed Hazardous Waste Transporter is strictly prohibited.
Transport of hazardous waste in a personal vehicle is also prohibited. A licensed transporter is not required for universal waste, and this may be transported via personal vehicle as long as Department of Transportation regulations are followed.
(9) Transport of hazardous waste into this facility from another facility, or by an employee is also prohibited. Universal waste can be received from another facility (i.e. sphygmomanometers from a Community-Based Outpatient Clinic in Pennsylvania) as long as DOT regulations are followed during transport and this transfer is coordinated with the GEMS Coordinator at extension 6097.
(10) Hazardous Waste and Universal Waste Inventory: Each Supervisor/Principal Investigator shall maintain a current inventory of hazardous and/ or universal waste generated, specifying approximate quantities, identity and location of a hazardous or universal waste.
Appendices C and D (as applicable) can be utilized, as long as a specific location is added for each identified waste.
(11) Acute Hazardous Waste (P Waste):\
a. Services using chemicals which when disposed of are classified as acute hazardous waste (see Appendix B) must obtain approval from the Safety Office prior to ordering and use of those chemicals.
b. Due to very strict limits on the amounts of acute hazardous waste which can be generated by the Medical Center (1Kg/month) only very small amounts of those chemicals will be permitted to be used.
c. Whenever feasible, less hazardous chemicals shall be substituted and methods or procedures shall be modified to limit the amount of acute hazardous waste generated.
d. All existing stock of those chemicals that are listed as acute hazardous waste must be registered with the Safety Office.
Arrangements will be made for continued use and waste disposal.
e. Hazardous waste that meets the criteria of acute hazardous waste shall be double containerized prior to being stored. Double containerized shall meet the following specifications:
i. Acute waste shall be stored in a compatible container with a lid.
ii. The container shall be labeled with the service, identification of waste and supervisor's initials.
iii. The primary container shall be sealed inside another container of like compatibility. The container shall be labeled with the same information as the primary container.
(12) Accumulation Limit: Up to 55 gallons of hazardous waste or 500 milliliters of acute hazardous waste may be collected before being transported to the hazardous waste storage area. Waste may be stored before reaching these amounts.
(13) Accumulation Time: Hazardous waste accumulation containers should not be stored in a satellite area once filled. The less time a container is in a satellite area, the less risk of a spill resulting from a leaking container. These filled containers should be transported to the central waste cage as soon as practicable. Chemicals in original containers once they are identified as waste should be moved to the central waste cage within 30 days. Universal waste may be stored in a satellite area for no more than 6 months before being dropped off to the waste cage or collected by a licensed vendor as in the case of fluorescent lamps.
(14) Hazardous Waste Disposal Forms: A disposal form must be filled out for each type of hazardous waste. This provides information for monthly generator status, manifesting required by EPA during removal to a disposal facility and the Biennial Report (if required) (See Appendix C).
(15) Mixed Waste: Mixed waste refers to waste which contains one or more hazardous chemicals and is radioactive.
a. Generation of Mixed Waste: Only mixed wastes with short half-lived radioisotopes are permitted to be generated in this Medical Center. All generation of mixed waste must have prior approval of the Medical Research Biohazard and Safety Subcommittee. Protocols for the generation of mixed waste must be submitted to this subcommittee for review on a case by case basis.
b. The use of hazardous scintillation fluids (for example, Toluene-based scintillation fluids) is prohibited in the Medical Center.
D. SPILLS:
(1) In the event of a hazardous or toxic chemical/waste spill refer to Medical Center Policy No. 138-33, Hazardous Chemical Incident Response Plan.
(2) Personnel using, mixing or administering hazardous or toxic chemicals/wastes (including those used for therapeutic purposes) shall be familiar with the hazards of those chemicals/waste cleanup procedures, available spill kits, and protective clothing needed for cleanup of a small spill. Spill responders must be trained to handle this spill and knowledgeable about the chemical hazards, or it will be treated as a significant spill per MCP 138-33.
NOTE: Materials used to cleanup spills of chemicals that are classified as hazardous waste, shall be treated as hazardous waste and disposed of as such. The waste must be sealed in a container and marked as hazardous waste spill cleanup material, and the type of waste identified on the outside of the sealed container and dated. The service responsible for the waste shall also be identified on the label.
5. DEFINITIONS: None
6. OTHER PARAGRAPHS: None
7. REFERENCES:
A. 29 CFR 1910.120
B. 29 CFR 1910.1200
C. 40 CFR Parts 260 to 264
D. 40 CFR 273
E. Pennsylvania (Pa) Code, Title 25, Chapters 260-270, including Pa Code, Title 25, F. Chapter 266 (Universal Waste)
G. PA Code, Title 25, Chapter 271.1 (Chemotherapeutic Waste)
H. PA Code, Title 25, Chapter 284 (Chemotherapeutic Waste)
I. N.J.A.C. 7:26G-1(Hazardous Waste Regulations)
J. 49 CFR Parts 171-173, 177-178
K. NFPA 30
L. Joint Commission on the Accreditation of Health Care
M. Organizations, Environment of Care Standards
N. VA Circular 00-86-3. Hazardous Waste Disposal dated January 17, 1986
O. MCM No. 138-33 Hazardous Chemical Incident Response Plan
P. MCM No. 11-15 Radioactive Waste Policy
8. RESCISSION: Medical Center Memorandum No. 138-26 “HAZARDOUS AND UNIVERSAL WASTE POLICY”, dated, August 2018.
9. REVIEW: December 2025
10. RECERTIFICATION: December 31, 2025
11. SIGNATORY AUTHORITY:
KAREN FLAHERTY-OXLER, MSN, RN
Medical Center Director Date Approved: Month Day, Year
NOTE: The signature remains valid until rescinded by an appropriate administrative action.
DISTRIBUTION: [MCPs are available at:
[https://dvagov.sharepoint.com/sites/VHAPHIcmcvamc/MCM/Forms/AllItems.aspx’
Attachment (3) https://dvagov.sharepoint.com/sites/VHAPHIcmcvamc/MCM/Forms/AllItems.aspx
Appendix A
CHARACTERISTICS OF HAZARDOUS WASTE
A solid waste is a hazardous waste if it exhibits any of the characteristics identified within this Appendix.
A hazardous waste which is identified by a characteristic in this Appendix but is not listed as a hazardous waste in Appendix B, is assigned the EPA Hazardous Waste Number set forth in the respective characteristic in this Subpart. This number must be used in complying with the notification requirements.
1. CHARACTERISTIC OF IGNITABILITY (D001): A solid waste exhibits the characteristic of ignitability if a representative sample of the waste has any of the following properties:
a. It is a liquid, other than an aqueous solution containing less than 24 percent alcohol by volume and has a flash point less than 60 degrees C (140 degrees F), as determined by a Pensky-Martens Closed Cup Tester, using the test method specified in ASTM Standard D-93-79 or D-93-80, or a Setaflash Closed Cup Tester, using the test method specified in ASTM Standard D-3278-78.
b. It is not a liquid and is capable, under standard temperature and pressure, of causing fire through friction, absorption of moisture or spontaneous chemical changes and when ignited, burns so vigorously and persistently that it creates a hazard.
c. It is an ignitable compressed gas.
d. It is an oxidizer defined as a substance that yields oxygen readily to stimulate the combustion of organic matter.
e. A solid waste that exhibits the characteristic of ignitability, but is not listed as a hazardous waste in Appendix B.
2. CHARACTERISTIC OF CORROSIVITY (D002): A solid waste exhibits the characteristic of corrosivity if a representative sample of the waste has any of the following properties:
a. It is aqueous and has a pH less than or equal to 2 or greater than or equal to
12.5, as determined by a pH meter.
b. A solid waste that exhibits the characteristic of corrosivity, but is not listed as a hazardous waste in Appendix B.
3. CHARACTERISTIC OF REACTIVITY (D003): A solid waste exhibits the characteristic of reactivity if a representative sample of the waste has any of the following properties:
a. It is normally unstable and readily undergoes violent change without detonating.
b. It reacts violently with water.
c. It forms potentially explosive mixtures with water.
d. When mixed with water, it generates toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment.
e. It is a cyanide or sulfide bearing waste which, when exposed to pH conditions between 2 and 12.5, can generate toxic gases, vapors or fumes in a quantity sufficient to present a danger to human health or the environment.
f. It is capable of detonation or explosive reaction if it is subjected to a strong initiating source or if heated under confinement.
g. It is readily capable of detonation or explosive decomposition or reaction at standard temperature and pressure.
h. It is a forbidden explosive as defined by DOT.
4. TOXICITY CHARACTERISTIC: Waste, which is tested under the toxicity characteristics leaching procedure, and is found to have a concentration greater than any of the regulated amounts of certain organic chemicals, pesticides and metals.
Appendix B
LISTS OF HAZARDOUS WASTE
A solid waste is a hazardous waste if it is listed in the Appendix.
Each hazardous waste listed in this Appendix is assigned an EPA Hazardous Waste Number which precedes the name of the waste. This number must be used in complying with the notification requirements.
HAZARDOUS WASTES FROM PROCESSES
The following solid wastes are listed hazardous wastes from non-specific sources:
F001 *The following spent halogenated solvents used in degreasing:
tetrachloroethylene trichloroethylene methylene chloride 1,1,1-trichloroethane carbon tetrachloride chlorinated fluorocarbons
*All spent solvent mixtures/blends used in degreasing containing, before use, a total of ten percent (by volume) of one or more of the above halogonated solvents or those solvents listed in F002, F004, and F005.
*Still bottoms from the recovery of these spent solvents and spent mixtures.
F002 *The following spent halogenated solvents:
tetrachloroethylene methylene chloride trichloroethylene 1,1,1-trichloroethane chlorobenzene orthodichlorobenzene trichlorofluoromethane 1,1,2-trichloroethane
1,1,2trichloro-1,2,2-trifluoroethane
*All spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above halogenated solvents or those listed in F001, F004, or F005.
*Still bottoms, from the recovery of these spent solvents and spent solvent mixtures.
F003 *The following spent non-halogenated solvents:
xylene acetone ethyl acetate ethyl benzene ethyl ether methyl isobutyl ketone n-butyl alcohol cyclohexanone methanol (methyl alcohol)
*All spent solvent mixtures/blends containing, before use, only the above spent non-halogenated solvents.
*All spent solvent mixtures/blends containing, before use, one or more of the above non-halogenated solvents, and a total to ten percent or more (by volume) of one or more of those solvents listed in F001, F002, F004, and F005.
*Still bottoms from the recovery of these spent solvents and spent solvent mixtures.
F004 *The following spent non-halogenated solvents:
cresole cresylic acid nitrobenzene
*All spent solvent mixtures/blends containing, before use, at total of ten percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, and F005.
*Still bottoms from the recovery of these spent solvents and spent solvent mixtures.
F005 *The following spent-non-halogenated solvents:
toluene methyl ethyl ketone carbon disulfide isobutanol pyridine benzene 2-ethoxyethanol 2-nitropropane
*All spent solvent mixtures/blends containing, before use, a total of ten percent or more (by volume) of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, or F004.
*Still bottoms from the recovery of these and spent solvents and sent solvent mixtures.
Appendix C
HAZARDOUS WASTE DISPOSAL FORM INSTRUCTIONS
1. List date, service and division, room number and extension.
2. A “Hazardous Waste” label is required for each container. These may be obtained by contacting the GEMS Coordinator at extension 6097. Properly describe the chemical and indicate its fill or accumulation date on the label. The term “properly describe” refers to the correct description of the chemical. In addition, label the container with the Service/
Product Line, identification of waste, and supervisor’s initials. Any other labels on the container must be removed, ‘x’ ed out or covered. Waste must be collected in a container that will not react with the contents or leak. Containers in which the materials originally came in are acceptable. Mixtures may require different containers. DO NOT MIX
CHEMICALS JUST TO CONSOLIDATE THEM AS A DANGEROUS REACTION
MAY OCCUR. Collection of individual waste in separate containers is required.
3. “Waste Generator Name” refers to the individual producing the waste. Print name legibly.
4. List individual material and all components of mixtures.
5. Indicate by check mark any chemicals that are acutely hazardous or “P-listed” (refer to
Appendix B). Provide volume and density data if the weight is unknown.
6. HAZARDOUS MATERIAL WASTE DISPOSAL FORM
Waste Generator Information
1. Date of drop-off: ____________
2. Service/ Product Line: __________
3. Location (Building/ room number):____________
4. Extension: ____________
5. This material has been properly described, has appropriate labels, and is in a suitable container for handling.
Waste Generator Signature Supervisor Name Name of Employee
Transporting Waste
A. Identification of Material: Use Generic Name, do not abbreviate or use the chemical formula. Print legibly or type.
Multiple/ Single Containers of Mixtures: □ Not Applicable
Compound/ Components Approximate Percentage in container
P-Listed component?
(check if yes)
Amount of waste in container of this composition: ____ □ounces □gallons □liters □grams
Number of Containers with this content/size in drop-off: ______________
Number of Containers with this content/ size in drop-off: ______________
Number of Containers with this content/ size in drop-off: ______________
Containers of Pure Chemical: □ Not Applicable
Compound
Size of
Container
(state units)
Number of
Containers with this content/ size
P-Listed
Waste?
(check when applicable)
CONTINUATION SHEET: Multiple/ Single Containers of Mixtures: Page __ of __
Number of Containers with this content/ size in in drop-off: ______________
CONTINUATION SHEET: Containers of Pure Chemical Page __ of __
Compound
Size of
Container
(state units)
Number of
Containers with this content/ size
P-Listed Waste?
(check when applicable)
Appendix D
UNIVERSAL WASTE DISPOSAL FORM
Waste Generator Information
1. Date of drop-off: ____________
2. Service/ Product Line: __________
3. Location (Building/ room number):____________
4. Extension: ____________
5. This material has been properly described, has appropriate labels, and is in a suitable container for handling.
Waste Generator Signature Supervisor Name Name of Employee
Transporting Waste
WASTE BATTERIES IN DROP-OFF: □ NOT APPLICABLE
Type of Battery (nickel cadmium, etc.)
Approximate Weight Number of this type/weight in drop-off
WASTE PESTICIDES IN DROP-OFF: □ NOT APPLICABLE
Pesticide Name (include EPA Registration Number)
Active ingredient Approximate
Weight (state units) or size of container
Number of this type/weight in drop-off
MERCURY-CONTAINING DEVICES* IN DROP-OFF: □ NOT APPLICABLE
NOTE: STATE OF PENNSYLVANIA ONLY!
IN NEW JERSEY- USE THE HAZARDOUS WASTE DISPOSAL FORM!
Type of Mercury-Containing
Device
Approximate
Weight
Inspected device(s) to ensure mercury is contained (not leaking etc.)? (check if yes)
Number of this type/weight in drop-off
*lamps, sphygmomanometers, thermostats, gauges, thermometers
| 2021-01-04T17:09:59-0500 | |
| Flaherty-Oxler, Karen A. |
File details come from the government source that posted it. Updated .