Attch_12-Section_52_00_00-Drawings_0004.pdf

Stampede Penstock and Butterfly Valve Rehab

Washoe Project, California Specifications No. 20-C0943

Drawings

52 00 00 - 1

SECTION 52 00 00

DRAWINGS

PART 1 GENERAL

1.01 DISCREPANCIES, ERRORS, OR OMISSIONS

A. Inform CO of discrepancies discovered on drawings in accordance with clause at FAR 52.236-21, Specifications and Drawings for Construction.

B. In accordance with clause at FAR 52.236-21, Specifications and Drawings for

Construction, in case of discrepancies, written specifications take precedence over drawings unless otherwise specified.

1.02 PROJECT CONDITIONS

A. Where there are differences as determined by CO between details and dimensions shown on drawings and details and dimensions of existing features at jobsite, use details and dimensions of existing features at jobsite.

1.03 SPECIFICATION DRAWINGS

A. Some drawings show details of fabrication or other details and specifications which are not a part of work under this contract. Disregard specifications and details shown on these drawings which are not applicable to work under this contract.

B. Reference drawings referred to on specification drawings and not considered necessary for contract purposes are not included in specifications.

C. Parts of work for which dimensions are not shown have been drawn to scale as nearly to final dimensions as possible before purchase of machinery or equipment and development of final general and detailed designs.

1.04 INFORMATION DRAWINGS

A. Drawings marked "For Information Only" in the drawing list are included to show existing features about which knowledge is required to perform work under this contract.

These drawings do not show work to be performed under this contract.

B. If there are differences as determined by CO between details and dimensions shown on these drawings and those of existing features at jobsite, use details and dimensions of existing features at jobsite.

52 00 00 - 2

1.05 STANDARD DRAWINGS

A. Standard drawings may show details which are not a part of work under this contract.

Disregard details shown on these drawings which are not applicable to work under this contract.

1.06 LIST OF DRAWINGS

A. Drawings listed in Table 52 00 00A - List of Drawings are made a part of Section C - Description/Specifications.

1.07 DRAWING NUMBERS IN NUMERICAL ORDER

A. Specification drawings are listed in numerical order in Table 52 00 00B - Drawings in

Numerical Order.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Not Used

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

General:

1 320-D-218 Location and Vicinity Map

2 320-D-60146 Stampede Penstock and Butterfly Valve Rehab – Contractor

Use Area – Overview – Sheet 1

3 320-D-60147 Stampede Penstock and Butterfly Valve Rehab – Contractor Use Area – Gates and Fences – Sheet 2

4 320-D-60148 Stampede Penstock and Butterfly Valve Rehab – Contractor Use Area – Power Plant – Sheet 3

5 320-D-60149 Stampede Penstock and Butterfly Valve Rehab – Contractor

Use Area Spillway Crest – Sheet 4

6 320-D-60150 Stampede Penstock and Butterfly Valve Rehab – Outlet Works and Penstock System - Schematic

MSE and Embankment Crest Structures:

52 00 00 - 3

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

7 320-D-232 MSE and Embankment Crest Structures – Instrumentation

Plan

Roadways and Vista Point:

8 320-D-261 Dog Valley Road – Plan and Profile – Sta. 28+00 to 39+00 – Sheet 3 of 5

Geology Drawing:

9 320-D-268 Main Dam and Dike Embankments – Test Pit Location Map

Information Drawings:

Civil:

Demolition:

10 320-D-245 Spillway Crest Structure – Demolition – Plan and Sections

Powerplant and Switchyard:

11 949-D-301 Stampede Powerplant and Switchyard – Location Map

12 949-D-302 Stampede Powerplant – Site Plan and Sections

13 949-D-303 Stampede Powerplant – General Arrangement – Plans and Sections

14 949-D-304 Stampede Powerplant – General Arrangement – Plan and

Sections

15 949-D-305 Stampede Powerplant – General Arrangement – Elevations, Sections, Details and Door Schedule

16 949-D-306 Stampede Powerplant – Plans and Sections

17 949-D-307 Stampede Powerplant – Concrete Outline – Plan, Sections and Details

18 949-D-308 Stampede Powerplant – Concrete Outline and Reinforcement Design – Plan, Sections and Details

19 949-D-309 Stampede Powerplant – Structural Design Data Sheet

20 949-D-310 Stampede Powerplant – Reinforcement Design – Plans

21 949-D-311 Stampede Powerplant – Reinforcement Design – Sections 1, 2, & 3

52 00 00 - 4

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

22 949-D-312 Stampede Powerplant – Reinforcement Design – Sections 4

Thru 8

Penstock and Outlet Works:

23 320-D-246 Spillway Crest Structure – Plan, Profile, and Sections – Sheet 1 of 2

24 320-D-247 Spillway Crest Structure – Plan, Profile, and Sections – Sheet 2 of 2

25 320-D-252 Spillway Crest Structure – Debris Boom

26 949-D-1 Stampede Dam – Spillway and Outlet Works – Plan, Profiles and Sections

27 949-D-2 Stampede Dam – Spillway – Inlet Walls, Crest and Bridge

28 949-D-3 Stampede Dam – Spillway – Chute

29 949-D-4 Stampede Dam – Spillway – Stilling Basin

30 949-D-7 Stampede Dam – Outlet Works – Control Structure – First Stage

31 949-D-8 Stampede Dam – Outlet Works – Control Structure – Second

Stage – Sheet 1 of 2

32 949-D-9 Stampede Dam – Outlet Works – Control Structure – Second Stage – Sheet 2 of 2

33 949-D-10 Stampede Dam – Outlet Works – Stilling Basin

34 949-D-11 Stampede Dam – Outlet Works – By-Pass Stilling Basin

35 949-D-17 Stampede Dam – Outlet Works – Steel Outlet Pipe – Plan – Elevations – Details

36 949-D-18 Stampede Dam – Outlet Works – Steel Outlet Pipe – Support

Rings – Flange - Drain

37 949-D-19 Stampede Dam – Outlet Works – Steel Outlet Pipe – Lateral

– Wye – Transitions – Bends

38 949-D-20 Stampede Dam – Outlet Works – Steel Outlet Pipe –

By-Pass Piping Drains

39 949-D-21 Stampede Dam – Outlet Works – Steel Outlet Pipe – By-Pass, Air and Drain Piping

52 00 00 - 5

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

40 949-D-122 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-

Pressure Gate – Assembly with Hoist – List of Parts – Sheet 1 of 10

41 949-D-123 Stampede Dam – Outlet Works – 6’ - 0” x 7’- 6” High-Pressure Gate – Upstream Frame – Sheet 2 of 10

42 949-D-124 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6”

High-Pressure Gate – Downstream Frame – Sheet 3 of 10

43 949-D-125 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-Pressure Gate – Bonnet – Sheet 4 of 10

44 949-D-126 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6”

High-Pressure Gate – Bonnet Cover – Sheet 5 of 10

45 949-D-127 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-Pressure Gate – Leaf and Seats – Sheet 6 of 10

46 949-D-128 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-Pressure Gate – Hydraulic Hoist – Assembly – List of

Parts – Sheet 7 of 10

47 949-D-129 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-Pressure Gate – Hydraulic Hoist – Details – Sheet 8 of 10

48 949-D-130 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-Pressure Gate – Transitions – Sheet 9 of 10

49 949-D-131 Stampede Dam – Outlet Works – 6’- 0” x 7’- 6” High-Pressure Gate – Hydraulic Hoist – Assembly – List of

Parts – Sheet 10 of 10

50 949-D-137 Stampede Dam – Outlet Works – Control for 4’x5’ Outlet Gates and 6.0’x7.5’ H.P. Gate – Installation – Piping – List of Drawings

51 949-D-313 Stampede Powerplant – Penstock Thrust Blocks – Concrete Outline and Reinforcement Design – Plans, Sections, and Details

52 949-D-491 Stampede Powerplant – Piping Layout – Plans and Sections

53 949-D-947 Stampede Powerplant – Steel Penstock and Discharge Line –

Plan and Sections

52 00 00 - 6

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

54 949-D-948 Stampede Powerplant – Steel Penstock and Discharge Line –

Sections and Details

Mechanical - Turbine:

55 0107T-1000A Stampede – Unit 2 – Sectional Assy of Turbine

56 0107T-1004A Stampede – Spiral Casing and Stay Ring Assy 1 of 2

57 0107T-1004A Stampede – Spiral Casing and Stay Ring Assy 2 of 2

58 0107T-1006A Stampede – Plan Assembly

59 0107T-1006A Stampede – Sectional Assembly

60 0107T-1010A Stampede – Assy of Draft Tube Unit 1 and 2

61 0107T-1017 Stampede – Runner 1 of 2

62 0107T-1017 Stampede – Runner 2 of 2

63 0107T-1020 Stampede – Unit 2 – Packing Box (In Halves)

64 0107T-1021 Stampede – Unit 2 – Gland Follower (In Halves)

65 0107T-1022 Stampede – Unit 2 – Lantern Ring

66 0107T-1026A Stampede – Unit 2 – Assy of Lower Cover & Wearing Ring

67 0107T-1032A Stampede – Unit 2 – Assy. of Inner Head Cover, Runner & Packing Box – Sheet 1 of 2

68 0107T-1032A Stampede – Unit 2 – Assy. of Inner Cover, Runner & Packing Box – Sheet 2 of 2

69 0107T-1037A Stampede – Unit 2 – Assy of Guide Apparatus & Head

Cover

70 0107T-1038 Stampede – Unit 2 – Head Cover

71 0107T-1042 Stampede – Unit 2 – Lever for Wicket Gare

72 0107T-1043 Stampede – Unit 2 – Gate Stop

73 0107T-1044 Stampede – Unit 2 – Clamping Plate

74 0107T-1045 Stampede – Unit 2 – Seal Retaining Plate

75 0107T-1046 Stampede – Unit 2 – Link for Gate

76 0107T-1050 Stampede – Unit 2 – Gate Retaining Plate

52 00 00 - 7

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

77 0107T-1055A Stampede – Unit 2 – Gate Opening Ring Servomotor

Arrangement

78 0107T-1056 Stampede – Turbine Shaft – Unit 2

79 0107T-1057 Stampede – Unit 2 – Intermediate Shaft

80 0107T-1060A Stampede – Unit 2 – Main Shaft and Main Bearing Assy.

81 0107T-1067A Assembly of Spiral Casing Feet and Foundation Bolts-Unit 2

81A 320M-D-2158 UN 2-Gate Retaining Plate

81B 320M-D-2270 Gland Sleeve Unit-2

Mechanical – Valves:

82 24-473 BS 24” – 473 Bare Stem Flanged Butterfly Valve

83 42-473 BS 42” – 473 Bare Stem Flanged Butterfly Valve

Metalwork:

84 949-D-477 Stampede Power Plant – Miscellaneous Metalwork – Frames, Covers and Gratings

85 949-D-478 Stampede Power Plant – Miscellaneous Metalwork – Ladders, Grab Bar, and Guardrails

86 949-D-479 Stampede Power Plant – Miscellaneous Metalwork - Stair

87 949-D-480 Stampede Powerplant – Miscellaneous Metalwork – Cable

Trays and Supports

Electrical:

88 949-D-1001 Stampede Powerplant – Electrical Installation – Unit No. 1 120 VAC Control – Schematic Diagram (Sht. 1 of 2)

89 949-D-1002 Stampede Powerplant – Electrical Installation – Unit No. 1

120 VAC Control – Schematic Diagram (Sht. 2 of 2)

90 949-D-1003 Stampede Powerplant – Electrical Installation – Unit No. 1 460 VAC Auxiliaries – Schematic Diagram

91 949-D-1004 Stampede Powerplant – Electrical Installation – Unit No. 2 120 VAC Control – Schematic Diagram (Sht. 1 of 2)

92 949-D-1005 Stampede Powerplant – Electrical Installation – Unit No. 2

120 VAC Control – Schematic Diagram (Sht. 2 of 2)

52 00 00 - 8

Table 52 00 00A - List of Drawings

Sheet No.

Drawing No. Title

93 949-D-1006 Stampede Powerplant – Electrical Installation – Unit No. 2

460 VAC Auxiliaries – Schematic Diagram

94 949-D-1008 Stampede Powerplant – Electrical Installation – 480 VAC Distribution Panel DCB – Three Line Diagram

95 949-D-1009 Stampede Powerplant – Electrical Installation – 480 VAC Distribution Panel DIA – Three Line Diagram

Standard Drawings:

95A 40-D-4334 Electrical Installation – Typical Grounding Details – Sheet 1 of 2

96 40-D-4335 Electrical Installation – Typical Grounding Details – Sheet 2 of 2

97 40-D-4753 Electrical Installation – Typical Grounding Details for

Switchyards and Substations

98 40-D-5370 Switchyards and Substations – Electrical Installation – Buried Insulated Cables – Typical

99 40-D-6234 Standard Nameplates

100 40-D-7094 Electrical Installation – Conduit Clamp and Conduit Supports – Typical Details

101 40-D-7102 Government Drawing Format - Drawing Border, Sample

Title Block, and Signature Lines

102 104-D-757 Pumping Plant – Electrical Installations – Designations and Symbols

103 104-D-1165 Design Data Typical – Powerplant_Pumping Plant –

Electrical Installation – Main Control Board – CSA – Panel 7R – Wiring Diagram

104 104-D-60005 Design Data – Electrical – Electrical Government Format - Standards

52 00 00 - 9

Table 52 00 00B - Drawings in

Numerical Order

Drawing No. Sheet No.

320-D-

320-D-218 1

320-D-232 7

320-D-246 23

320-D-247 24

320-D-252 25

320-D-261 8

320-D-268 9

320-D-245 10

320-D-60146 2

320-D-60147 3

320-D-60148 4

320-D-60149 5

320-D-60150 6

320M-D

320M-D-2158 81A

320M-D-2270 81B

863-D-

863-D-60031 96

863-D-60033 97

863-D-60034 98

949-D-

949-D-1 26

949-D-2 27

949-D-3 28

949-D-4 29

52 00 00 - 10

Table 52 00 00B - Drawings in Numerical Order

Drawing No. Sheet No.

949-D-7 30

949-D-8 31

949-D-9 32

949-D-10 33

949-D-11 34

949-D-17 35

949-D-18 36

949-D-19 37

949-D-20 38

949-D-21 39

949-D-122 40

949-D-123 41

949-D-124 42

949-D-125 43

949-D-126 44

949-D-127 45

949-D-128 46

949-D-129 47

949-D-130 48

949-D-131 49

949-D-137 50

949-D-301 11

949-D-302 12

949-D-303 13

949-D-304 14

949-D-305 15

949-D-306 16

52 00 00 - 11

Table 52 00 00B - Drawings in Numerical Order

Drawing No. Sheet No.

949-D-307 17

949-D-308 18

949-D-309 19

949-D-310 20

949-D-311 21

949-D-312 22

949-D-313 51

949-D-477 84

949-D-478 85

949-D-479 86

949-D-480 87

949-D-491 52

949-D-947 53

949-D-948 54

949-D-1001 88

949-D-1002 89

949-D-1003 90

949-D-1004 91

949-D-1005 92

949-D-1006 93

949-D-1008 94

949-D-1009 95

0107T-

0107T-1000A 55

0107T-1004A

52 00 00 - 12

Table 52 00 00B - Drawings in Numerical Order

Drawing No. Sheet No.

0107T-1004A

0107T-1006A

0107T-1006A

0107T-1010A 60

0107T-1017

0107T-1017

0107T-1020 63

0107T-1021 64

0107T-1022 65

0107T-1026A 66

0107T-1032A

0107T-1032A

0107T-1037A 69

0107T-1038 70

0107T-1042 71

0107T-1043 72

0107T-1044 73

0107T-1045 74

0107T-1046 75

0107T-1050 76

0107T-1055A 77

0107T-1056 78

52 00 00 - 13

Table 52 00 00B - Drawings in Numerical Order

Drawing No. Sheet No.

0107T-1057 79

0107T-1060A 80

0107T-1067A 81

24-

24-473 BS 82

42-

42-473 BS 83

40-D-

40-D-4334 95A

40-D-4335 96

40-D-4753 97

40-D-5370 98

40-D-6234 99

40-D-7094 100

40-D-7102 101

104-D-757 102

104-D-1165 103

104-D-60005 104

END OF SECTION

52 00 00 - 14

This page intentionally left blank.