102800 - Toilet Bath and Custodial Accessories.pdf

KENT MEMORIAL LIBRARY

10 28 00 - TOILET, BATH, AND CUSTODIAL ACCESSORIES

October 15, 2025

SECTION 102800 - TOILET, BATH, AND CUSTODIAL ACCESSORIES

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Public-use washroom accessories.

2. Private-use bathroom accessories.

3. Healthcare accessories.

4. Childcare accessories.

5. Underlavatory guards.

6. Custodial accessories.

7. Toilet Partitions

1.2 ACTION SUBMITTALS

A. Product Data: For each type of product.

B. Finish Samples: for each exposed product finish specified.

1.3 SUSTAINABILITY SUBMITTALS:

1. Environmental Product Declarations (EPDs).

2. Product Health Declarations (PHDs) where available for all listed products.

1.4 INFORMATIONAL SUBMITTALS

A. Sample warranty.

1.5 CLOSEOUT SUBMITTALS

A. Maintenance data.

1.6 WARRANTY

A. Manufacturer's Special Warranty for Mirrors: Manufacturer agrees to repair or replace mirrors that fail in materials or workmanship within specified warranty period.

1. Warranty Period: 15 years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1 Basis of Design: Bobrick Washroom Equipment, Inc., unless noted otherwise.

2.2 PUBLIC-USE WASHROOM ACCESSORIES

A. Toilet Tissue (Roll) Dispenser: B-9547

1. Description: Double-roll dispenser: Bobrick Fino Collection: B-9547.

2. Mounting: Surface mounted.

3. Operation: Noncontrol delivery with standard spindle.

4. Capacity: Designed for 4-1/2 or 5 inch (114 or 127-mm) diameter tissue rolls.

5. Material and Finish: Stainless steel, satin finish.

B. Paper Towel (Roll) Dispenser: Paper towel dispenser: B-253 (for the warming pantry)

1. Mounting: Surface mounted.

2. Minimum Capacity: Standard Paper Towel rolls.

3. Material and Finish: Stainless steel, satin.

C. Combination Towel (Folded) Dispenser/Waste Receptacle: : ConturaSeries B-43944:

1. Mounting: Semirecessed.

2. Minimum Capacity: 600 C-fold or 800 multifold towels.

3. Material and Finish: Stainless steel, satin.

4. Lockset: Tumbler type.

5. Minimum Waste-Receptacle Capacity: 15 gal. (45.4 L).

6. Material and Finish: Stainless steel, finish satin.

7. Liner: trash bags – (not included).

D. Grab Bar: Straight Grab Bars: B-5806 Series:

1. Mounting: Flanges with concealed fasteners.

2. Material: Stainless steel. Finish: satin finish.

3. Outside Diameter: 1-1/4 inches (32 mm).

4. Configuration and Length: As indicated on Drawings, usually straight, 36 inches (914 mm) long – horizontal and vertical.

E. Sanitary-Napkin Disposal Unit: TrimLineSeries Recessed and Surface Mounted Sanitary Napkin Disposal:

Recessed: B-3513 and Surface: B-35139:

1. Mounting: Recessed where wall space allows, and Partition mounted where required.

2. Door or Cover: Self-closing, disposal-opening cover.

3. Receptacle: Removable.

4. Material and Finish: Stainless steel, satin finish.

F. Sanitary-Napkin Dispenser Unit: ConturaSeries Napkin/Tampon Vendor: B-47064C

1. Mounting: Semi-Recessed.

2. Door or Cover: key-lock.

3. Free – no coin operation

4. Material and Finish: Stainless steel, satin finish.

G. Mirror Unit: Tilt Mirror with Stainless Steel Frame: B293 2436:

1. Frame: Stainless steel, fixed tilt.

a. Corners: Manufacturer's standard.

2. Hangers: Produce rigid, tamper- and theft-resistant installation, manufacturer’s standard.

3. Material and Finish: Stainless steel, satin finish.

4. Size: 24” wide x 36” tall.

H. Mirror Unit: Fixed Mirror with Stainless Steel Frame: B290 2460:

1. Frame: Stainless steel, fixed.

a. Corners: Manufacturer's standard.

2. Hangers: Produce rigid, tamper- and theft-resistant installation, manufacturer’s standard.

3. Material and Finish: Stainless steel, satin finish.

4. Size: 24” wide x 60” tall.

I. Coat Hook: Fino Collection Coat Hook with Bumper

1. Description: Single-prong unit.

2. Material and Finish: Stainless steel, satin finish.

2.3 TOILET PARTITIONS

J. Toilet Partitions: Basis of Design: Bobrick: Traditional Partitions:

1. Material: Duraline Series: Compact Grade laminate (CGL) on black phenolic core solid material.

2. Design Option: Floor Anchored

3. Privacy Option: Maximum Height: 71.75" doors & panels, 4.5" floor clearance.

4. Gap Option: Standard Reduced Gap.

5. Hardware: Standard Hardware - stainless steel

6. Colors to be selected by the architect from the full range of available colors (full range of color samples required)

2.4 CHILDCARE ACCESSORIES

A. Diaper-Changing Station: Koala Kare Baby Changing Station: KB310-SSWM:

1. Description: Horizontal unit that opens by folding down from stored position and with child-protection strap.

a. Engineered to support minimum of 150-lb static load when opened.

2. Mounting: Surface mounted, with unit projecting not more than 4 inches (100 mm) from wall when closed.

3. Material and Finish: Stainless steel, satin finish, exterior shell with rounded plastic corners; HDPE interior in manufacturer's standard color.

4. Include bag / coat hook.

2.5 UNDERLAVATORY GUARDS

A. Underlavatory Guard:

1. Description: Insulating pipe covering for supply and drain piping assemblies that prevents direct contact with and burns from piping; allow service access without removing coverings.

2. Material and Finish: Antimicrobial, molded plastic, white.

2.6 CUSTODIAL ACCESSORIES

A. Utility Shelf - Mop and Broom Holder: Bradley Model 9934 Utility Shelf with Hooks & Holders:

1. Description: Unit with shelf, hooks, holders.

2. Length: 36 inches (914 mm).

3. Hooks: Five.

4. Mop/Broom Holders: Four, spring-loaded, rubber hat, cam type.

5. Material and Finish: Stainless steel, satin finish.

a. Shelf: Not less than nominal 18-gauge stainless steel.

B. See Plumbing Specifications for Custodial slop sinks and fittings

2.7 FABRICATION

A. Keys: Provide universal keys for internal access to accessories for servicing and resupplying. Provide minimum of six keys to Owner's representative.

PART 3 - EXECUTION

3.1 INSTALLATION

A. Install accessories according to manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated.

B. Grab Bars: Install to withstand a downward load of at least 250 lbf (1112 N), when tested according to

ASTM F 446.

END OF SECTION 10 28 00