Request for information for impact analysis for the potential addition of G-Pak Storage and Shipping Boxes to the Procurement List of the Committee for Purchase from People Who Are Blind or Severely Disabled
Added: Oct 23, 2014 2:05 pm
This Notice DOES NOT constitute a request for a quote, or proposal for the procurement of products or services. This Notice concerns an action which may affect the ability of commercial industry to sell the products listed in this Notice to the Federal Government. The Committee for Purchase From People Who Are Blind or Severely Disabled (now operating as the U.S. AbilityOne Commission) is an independent agency of the Federal Government. The Committee, under the authority of the Javits-Wagner-O'Day Act of 1971, and through the administration of its AbilityOne® Program, provides employment opportunities for people who are blind or have other significant disabilities through Federal Government purchases from nonprofit agencies employing such individuals. Products or services which are required to be purchased by the Federal Government under the authority of the AbilityOne® Program are added to the Committee's Procurement List (PL). The PL can viewed on the agency's website at www.abilityone.gov. Once a product or service is added to the PL to be provided by a nonprofit agency, no other product determined to be essentially the same can be sold to the Federal government.By regulation (41 CFR 51-2.4(a)(4) the Committee is required to complete an impact analysis related to the potential addition of the following product(s) to the PL:NSN: 8115-01-444-0197Name: Shipping and Storage System Sleeve without Drop Panel, White, 40" W x 48" L x 30" DDescription: Designed for use with NSN 8115-01-444-0211 (pallet top) and NSN 8115-01-444-0206 (pallet bottom). Complete state-of-the-art storage/shipping system is constructed of heavy-duty AAA-fluted configuration fiberboard sleeve, a plastic top, and a plastic bottom pallet (with four-way entrance capability). Does not include drop panel. The sleeve can be locked with bottom pallet and top to create a rigid and secure system, eliminating strapping and stretch wrapping. The rugged and impact-resistant bottom pallet and top are formed from two sheets of high-density polyethylene. Palletized loads (up to 10,000 lbs.) can be stored up to four high. The 40 x 48" bottom pallet and top have nesting capabilities to save space and stack securely. Reusable system is designed for years of service. Sleeves are collapsible and designed to occupy nearly 30 percent less space than traditional systems. UOI is EA.NSN: 8115-01-444-0198Name: Shipping and Storage System Sleeve without Drop Panel, White, 40" W x 48" L x 45" DDescription: Designed for use with NSN 8115-01-444-0211 (pallet top) and NSN 8115-01-444-0206 (pallet bottom). Complete state-of-the-art storage/shipping system is constructed of heavy-duty AAA-fluted configuration fiberboard sleeve, a plastic top, and a plastic bottom pallet (with four-way entrance capability). Does not include drop panel. The sleeve can be locked with bottom pallet and top to create a rigid and secure system, eliminating strapping and stretch wrapping. The rugged and impact-resistant bottom pallet and top are formed from two sheets of high-density polyethylene. Palletized loads (up to 10,000 lbs.) can be stored up to four high. The 40 x 48" bottom pallet and top have nesting capabilities to save space and stack securely. Reusable system is designed for years of service. Sleeves are collapsible and designed to occupy nearly 30 percent less space than traditional systems. UOI is EA.NSN: 8115-01-556-2579Name: Shipping and Storage System without Drop Panel, Black/White, 40" W x 48" L x 30.5" DDescription: Kit contains black plastic top, base and corrugated fiberboard sleeve. Actual sleeve height is 24". Pallet is 4-way entry, nestable, fire retardant, reusable, with a 3,000 lb. capacity. Made of thermoformed high density polyethylene, assembled pallet weighs 22-lbs. and features no-drop panel. Also includes eight locking clips to attach top to sleeve and sleeve to base. UOI is KT.NSN: 8115-01-444-0212Name: Shipping and Storage System Sleeve with Drop Panel, White, 40" W x 48" L x 45" DDescription: Designed for use with NSN 8115-01-444-0211 (pallet top) and NSN 8115-01-444-0206 (pallet bottom). Complete state-of-the-art storage/shipping system is constructed of heavy-duty AAA-fluted configuration fiberboard sleeve, a plastic top, and a plastic bottom pallet (with four-way entrance capability). Drop panel included to provide easy access to each container even when stacked. The sleeve can be locked with bottom pallet and top to create a rigid and secure system, eliminating strapping and stretch wrapping. The rugged and impact-resistant bottom pallet and top are formed from two sheets of high-density polyethylene. Palletized loads (up to 10,000 lbs.) can be stored up to four high. The 40 x 48" bottom pallet and top have nesting capabilities to save space and stack securely. Reusable system is designed for years of service. Sleeves are collapsible and designed to occupy nearly 30 percent less space than traditional systems. UOI is EA.NSN: 8115-01-556-2580Name: Shipping and Storage System Kit without Drop Panel, Black/White, 40" W x 48" L x 36.5" DDescription: Kit contains black plastic top, base and corrugated fiberboard sleeve. Actual sleeve height is 30". Pallet is 4-way entry, nestable, fire retardant, reusable, with a 3,000 lb. capacity. Made of thermoformed high density polyethylene, assembled pallet weighs 22-lbs. and features no-drop panel. Also includes eight locking clips to attach top to sleeve and sleeve to base. UOI is KT.NSN: 8115-01-556-2581Name: Shipping and Storage System without Drop Panel, Black/White, 40" W x 48" L x 51.5" DDescription: Kit contains black plastic top, base and corrugated fiberboard sleeve. Actual sleeve height is 45". Pallet is 4-way entry, nestable, fire retardant, reusable, with a 3,000 lb. capacity. Made of thermoformed high density polyethylene, assembled pallet weighs 22-lbs. and features no-drop panel. Also includes eight locking clips to attach top to sleeve and sleeve to base. UOI is KT.Should these items be added to the PL, the contracting agency who will be authorized by the Committee to order the products on behalf of the Federal Government under the authority of the AbilityOne Program® will be the General Services Administration, New York, NY.Before adding a product to the PL, the Committee considers the potential impact that removal from commercial channels of this product, as well as products determined to be essentially the same (ETS) (41CFR 51-5.3(a), would have on the sales of firms that are currently providing the products listed in this Notice to the Federal Government and the extent to which the potentially affected firms are dependent on the income. Once added to the PL, the products determined to be ETS to the product(s) added to the PL will be blocked from being sold to Federal Government agencies. The products that have been thus far determined to likely be essentially the same are:NSN: 8115-01-444-0197ETS Stock Numbers: None reported, no other item determined to be ETS at this time.NSN: 8115-01-444-0198ETS Stock Numbers: None reported, no other item determined to be ETS at this time.NSN: 8115-01-556-2579ETS Stock Numbers: None reported, no other item determined to be ETS at this time.NSN: 8115-01-444-0212ETS Stock Numbers: None reported, no other item determined to be ETS at this time.NSN: 8115-01-556-2580ETS Stock Numbers: None reported, no other item determined to be ETS at this time.NSN: 8115-01-556-2581ETS Stock Numbers: None reported, no other item determined to be ETS at this time.The items listed above will potentially be added to the PL for the Total (A-List) Government Requirement. That is, should any Federal Government agency determine a need for the product, the procurement of the item will be mandatory by that agency through the AbilityOne® Program.These products will also be offered through the AbilityOne Distributor Program. If your firm is currently selling these products to the Federal Government through commercial means, your firm will continue to sell these products through your AbilityOne Distributor status and there would be no impact against your firm. If your firm is not an AbilityOne Distributor but would like to become a Distributor, please contact the AbilityOne Program for guidance. At a minimum, your firm must have a GSA Schedule 75 contract with at least 10,000 items on the schedule contract to be eligible. Firms can become AbilityOne Distributors for limited items such as toner cartridges or janitorial/sanitation items but must contact the AbilityOne Program for more details.If your firm is selling either the item(s) listed above, or the items that have been determined to be ETS, it is important that your firm report the following information to the Committee:1. Total Company Revenues accrued from all sources for the most recent 12-month time period. When assessing impact on a commercial firm, the Committee takes into account the revenues of the parent, subsidiary, and affiliated corporations. If your company is a parent, subsidiary, or affiliated corporation to another corporation, please identify the other corporation to which the company is related, the nature of the relationship, and the other corporation's total revenue data. Please define the 12-month period reported.2. Revenues accrued by providing the products listed in this Notice to the Federal Government for the same most recent 12-month period. If reporting on more than one item listed above, please report the revenue per each item, whether the NSNs or ETS items, and identify the item.3. Identify the contract number that your firm holds to sell the item(s) to the Federal Government, the government agency, and period of performance (contract end date) for the item(s) your firm is reporting on. Identify the specific items per contract.4. If your firm is selling the product through purchases by Government Purchase Cards (GPC), please identify that and the amount made through GPC purchases.5. Identify whether or not the deliveries under the contract have been completed.6. The length of time your firm has been providing these products to the Federal Government.7. Identify any small business statuses your firm has qualified for, such as 8(a), woman-owned, service disabled veteran-owned, etc.8. Provide your firm's DUNS number. The number is needed to confirm your company's small business statuses with the Small Business Administration (SBA).9. Include your firm's mailing address. Do not use post office boxes, as all replies are sent via means that will not be delivered to a post office box. The address should be for the person who has signed the letter containing the information submitted.All information requested above must be included in the response. Responses that do not include the information requested will be determined to be non-responsive and will not be included in the impact analysis.All responses will be held as confidential and will not be released to any outside party.The information prescribed above must reach the Committee no later than November 14, 2014 and can be submitted in letter format. If information is not received by the date requested, the Committee will conclude that potentially affected firms have determined that there will be no severe adverse impact should the listed products be added to the PL.Your letter can be returned either by mail to the address on this notice or by fax to (703) 603-0655. You may also provide any other information you deem appropriate.General information concerning the Committee and its authority can be found in Title 41 United States Code, Sections 8501-8506, or Title 41 Code of Federal Regulations, Chapter 51. Both of these references can be found on the Committee's website at www.abilityone.gov. If you have specific questions or require further explanation concerning this Notice or the addition of the above-referenced product to the PL, please contact Mike Jurkowski at (703) 603-2117.
CP-10-23-14-01 AbilityOne
10/23/14, 2:05 PM