10 44 16.pdf

SPECIAL OPERATIONS FACILITY PN 92594

FORT BRAGG, NORTH CAROLINA

SECTION TABLE OF CONTENTS

DIVISION 10 - SPECIALTIES

SECTION 10 44 16

FIRE EXTINGUISHERS

11/19

PART 1 GENERAL

1.1 SUBMITTALS

1.2 DELIVERY, STORAGE, AND HANDLING

1.2.1 Samples

PART 2 PRODUCTS

2.1 SYSTEM DESCRIPTION

2.1.1 Material

2.1.2 Size

2.1.3 Accessories

2.2 EQUIPMENT

2.2.1 Cabinets

2.2.1.1 Material

2.2.1.2 Type

2.2.1.3 Size

PART 3 EXECUTION

3.1 INSTALLATION

3.2 PROTECTION

3.2.1 Repairing

3.2.2 Cleaning

-- End of Section Table of Contents --

SECTION 10 44 16 Page 1

SECTION 10 44 16

FIRE EXTINGUISHERS

11/19

****Amendment 0002**** Entire Section has been added

PART 1 GENERAL

1.1 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for information only.

Submittals with an "S" are for inclusion in the Sustainability eNotebook, in conformance to Section 01 33 29 SUSTAINABILITY REPORTING. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:

SD-01 Preconstruction Submittals

Manufacturer's Data; G

SD-02 Shop Drawings

Fire Extinguishers;

Accessories; G

Cabinets; G

SD-03 Product Data

Fire Extinguishers;

Accessories;

Cabinets;

Wall Brackets; G

Replacement Parts List; G

SD-04 Samples

Fire Extinguisher; G

Cabinet; G

Accessories; G

SD-07 Certificates

Fire Extinguishers Certifications; G

Manufacturer's Warranty with Inspection Tag; G

SECTION 10 44 16 Page 2

1.2 DELIVERY, STORAGE, AND HANDLING

Protect materials from weather, soil, and damage during delivery, storage, and construction.

Deliver materials in their original packages, containers, or bundles bearing the brand name and the name and type of the material.

1.2.1 Samples

Provide the following equipment samples: one full-sized sample of each type of cabinet being installed; three samples of wall brackets and accessories of each type being used.

Use approved samples for installation, with proper identification and storage.

PART 2 PRODUCTS

Submit fabrication drawings consisting of fabrication and assembly details performed in the factory and product data for the following items:

Accessories, cabinets, Wall Brackets.

2.1 SYSTEM DESCRIPTION

2.1.1 Material

Provide enameled steel extinguisher shell.

2.1.2 Size

10 pounds extinguishers.

2.1.3 Accessories

Forged brass valve

Fusible plug

Safety release

Pressure gage

2.2 EQUIPMENT

2.2.1 Cabinets

2.2.1.1 Material

Provide stainless steel cabinets sized for 10 pound fire extinguisher.

Cabinet door to have vertical acrylic vision panel, partial width of door. Provide vertical diecut lettering to read "FIRE EXTINGUISHER" in black color to metal section of the cabinet door..

2.2.1.2 Type

Provide semi-recessed cabinet for a 4 inch wall with trim projection from

SECTION 10 44 16 Page 3 wall not to exceed 2 inches.

2.2.1.3 Size

Dimension cabinets to accommodate the specified fire extinguishers.

PART 3 EXECUTION

3.1 INSTALLATION

Comply with the manufacturer's recommendations for all installations.

Mount bottom of cabinet 36 inches AFF, unless noted otherwise.

Comply with the manufacturer's recommendations for all installations.

3.2 PROTECTION

3.2.1 Repairing

Remove and replace damaged and unacceptable portions of completed work with new work at no additional cost to the Government.

Submit replacement parts list indicating specified items replacement part, replacement cost, and name, address and contact for replacement parts distributor.

3.2.2 Cleaning

Clean all surfaces of the work, and adjacent surfaces which are soiled as a result of the work. Remove from the site all construction equipment, tools, surplus materials and rubbish resulting from the work.

-- End of Section --

SECTION 10 44 16 Page 4