Bid Addendum 1a CRWU 06-2071.pdf

COLORADO AIR NATIONAL GUARD

BUCKLEY AIR FORCE BASE – 140 CES

PROJECT NO. CRWU 02-9003

Repair Wing Headquarters Bldg 706 Buckley Air Force Base, Aurora, CO

BID ADDENDUM NUMBER 1

2 September 2009

REPAIR WING HEADQUARTERS

PROJECT NO. CRWU 06-2071

PART I – PROJECT REQUIREMENTS

1. The Contractor is to provide all plant, material, equipment, and labor necessary to perform the work outlined in this Addendum.

2. All work shall be performed in accordance with the contract drawings and specifications.

3. The Contractor is to include the following changes to Specifications and drawings as indicated below.

4. The Contractor shall remove data and phone lines from rooms to be demolished in Area 3, Level 1 from the communications wall outlet to the communications rack in Room 111A. All surface mounted communications Panduit® shall be removed. No other communications demolition is required outside of Area 3, Level 1.

5. The Contractor shall maintain the integrity of the existing Public Address system and re-install speakers as necessary.

PART II – TECHNICAL SPECIFICATIONS

1. Section 01010 – Scope of Work, Paragraph 1.6, Miscellaneous Requirements.

ADD “G. The contractor shall be responsible for the movement, including the proper disassembly and re-assembly as required, of all furniture whose relocation is necessary as part of this project. This includes the relocation of furniture from Level 1, Area 3 of Building 706 to the temporary facility that will be located North of Building 830.

2. Delete Specifications Sections 07530 and 15732

3. Insert Attached Sections 07530 and 15732

PART III – CONTRACT DRAWINGS

1. Drawing G001, Delete existing Drawing, Insert New G001

2. Drawing C102, titled “Concrete Replacement Site Plan” is revised to denote that contractor shall replace two shattered concrete slabs in the loading dock pavement at the North East corner of the building. Contractor shall remove each of the damaged slabs and replace by matching thickness of existing pavement. One of the shattered slabs is rectangular in shape measuring approximately 68 sq ft. The other shattered slab is irregular in shape measuring approximately 18 sq ft.

3. Drawing A012, delete “Remove canopy and supports” From Drawing Note DM13 so that it reads “Remove Pass-Thru window and frame”.

4. Drawing A026, Delete existing Drawing, Insert New A026

5. Drawing A106, Delete existing Drawing, Insert New A106

6. Drawing A108, Delete existing Drawing, Insert New A108

COLORADO AIR NATIONAL GUARD

BUCKLEY AIR FORCE BASE – 140 CES

PROJECT NO. CRWU 02-9003

Repair Wing Headquarters Bldg 706 Buckley Air Force Base, Aurora, CO

2 September 2009

REPAIR WING HEADQUARTERS

PROJECT NO. CRWU 06-2071

BID ADDENDUM NUMBER 1

7. Drawing M002, Delete existing Drawing, Insert New M002

8. Drawing M003, Keyed Note 3. ADD: The flues from the new Water Heaters and existing Boiler shall be replaced in their entirety.

9. Drawing M006, Delete existing Drawing, Insert New M-006

10. Drawing M101, Keyed Note 3. ADD: The flues from the new Water Heaters and existing Boiler shall be replaced in their entirety.

11. Drawing M104, Delete existing Drawing, Insert New M104

12. Drawing M201, Delete existing Drawing, Insert New M201

13. Add Drawing M202

14. Drawing E003, Delete Note 3 and Note 5. ADD: Note 8. Protect devices and cabling to remain.

15. Drawing E004, Delete Note 5. ADD: Note 8. Protect devices and cabling to remain.

16. Drawing E005, Delete Note 3 and Note 5. ADD: Note 8. Protect devices and cabling to remain.

17. Drawing E006, Delete existing Drawing, Insert New E006

18. Drawing E206, Delete existing Drawing, Insert New E206

19. Drawing E303, Delete all new combination data and telephone outlets and delete wall mounted telephone outlets.

20. Drawing E304, Delete all new combination data and telephone outlets and delete wall mounted telephone outlets.

21. Drawing E404, Delete existing Drawing, Insert New E404

22. Drawing E502, Delete existing Drawing, Insert New E502

23. Drawing E601, Delete existing Drawing, Insert New E601

24. Drawing E602, Delete existing Drawing, Insert New E602

25. Add Trailer Drawing Temp Trailers – Arch A1

26. Add Trailer Drawing Temp Trailers – Site & Utility C1

END OF ADDENDUM 1