bafbrwhq15410.pdf

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

PLUMBING FIXTURES CRWU 06-2071

06/09/09 15410-1 BUCKLEY AFB

SECTION 15410 - PLUMBING FIXTURES

PART 1 - GENERAL

1.01 SUMMARY:

A. This Section includes the following conventional plumbing fixtures and related components:

1. Faucets for lavatories, showers and sinks.

2. Flushometers.

3. Toilet seats.

4. Fixture supports.

5. Water closets.

6. Urinals.

7. Lavatories.

8. Kitchen sinks.

9. Service sinks.

B. Related Work Specified Elsewhere:

1. Toilet and bath accessories: DIVISION 10.

2. SECTION 15415 - DRINKING FOUNTAINS AND WATER COOLERS.

3. Backflow preventers, floor drains, and specialty fixtures not included in this Section:

SECTION 15145 – DOMESTIC WATER PIPING SPECIALTIES.

1.02 REFERENCES:

A. Applicable Standards (Latest Edition):

1. American National Standards Institute (ANSI):

a. SS-1 - Performance Standard for Solid Surface Materials.

b. Z124.2 - Plastic Shower Units.

2. American Society of Sanitary Engineering (ASSE):

a. 1001 - Pipe Applied Atmospheric Type Vacuum Breakers.

b. 1016 - Individual Thermostatic, Pressure Balancing and Combination Pressure

Balancing and Thermostatic Control Valves for Individual Fixtures.

c. 1021 - Drain Air Gaps for Domestic Dishwasher Applications.

d. 1025 - Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications.

e. 1037 - Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures.

3. ASME International (ASME):

a. A112.6.1M - Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for

Public Use.

b. A112.6.3 - Floor and Trench Drains.

c. A112.18.1 - Plumbing Fixture Fittings.

d. A112.18.2 - Plumbing Fixture Waste Fittings.

e. A112.18.3M - Performance Requirements for Backflow Protection Devices and

Systems in Plumbing Fixture Fittings.

f. A112.18.6 - Flexible Water Connectors.

g. A112.18.7 - Deck-Mounted Bath/Shower Transfer Valves with Integral Backflow

Protection.

h. A112.19.1M - Enameled Cast-Iron Plumbing Fixtures.

i. A112.19.2M - Vitreous China Plumbing Fixtures.

j. A112.19.3 - Stainless Steel Plumbing Fixtures (Designed for Residential Use).

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-2 06/09/09

k. A112.19.4M - Porcelain Enameled Formed Steel Plumbing Fixtures.

l. A112.19.5 - Trim for Water-Closet Bowls, Tanks and Urinals.

m. B1.20.1 - Pipe Threads, General Purpose (Inch).

n. B1.20.7 - Hose Coupling Screw Threads (Inch).

4. ASTM International (ASTM):

a. F409 - Thermoplastic Accessible and Replaceable Plastic Tube and Tubular

Fittings.

b. F444 - Consumer Safety Specification for Scald-Preventing Devices and Systems in

Bathing Areas.

c. F445 - Consumer Safety Specification for Thermal-Shock-Preventing Devices and

Systems in Showering Areas.

d. F446 - Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area.

e. F462 - Consumer Safety Specification for Slip-Resistant Bathing Facilities.

5. Federal Government:

a. Public Law 90-480: Architectural Barriers Act.

b. Public Law 101-336: Americans with Disabilities Act (ADA).

c. Public Law 102-486: Energy Policy Act.

6. International Code Council, Inc. (ICC):

a. A117.1 - Accessible and Usable Buildings and Facilities (ANSI).

7. NFPA:

a. 70 - National Electrical Code.

8. NSF International (NSF):

a. 2 - Food Equipment.

b. 61 - Drinking Water System Components - Health Effects.

9. Underwriters Laboratories Inc. (UL):

a. 499 - Electric Heating Appliances.

b. 1951 - Electric Plumbing Accessories.

1.03 DEFINITIONS:

A. Accessible Fixture: Plumbing fixture that can be approached, entered, and used by people with disabilities.

B. Fitting: Device that controls the flow of water into or out of the plumbing fixture. Fittings specified in this Section include supplies and stops, faucets and spouts, shower heads and tub spouts, drains and tailpieces, and traps and waste pipes. Piping and general-duty valves are included where indicated.

C. PVC: Polyvinyl chloride plastic.

D. Solid Surface: Nonporous, homogeneous, cast-polymer-plastic material with heat-, impact-, scratch-, and stain-resistance qualities.

1.04 SUBMITTALS:

A. General: Submit each item in this Article in accordance with SECTION 15050 - BASIC

MECHANICAL MATERIALS AND METHODS.

B. Product Data: For each type of plumbing fixture indicated. Include selected fixture and trim, fittings, accessories, appliances, appurtenances, equipment, and supports. Indicate materials and finishes, dimensions, construction details, and flow-control rates.

C. Operation and Maintenance Data: For plumbing fixtures to include in emergency, operation, and maintenance manuals.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-3 BUCKLEY AFB

D. Warranty: Special warranty specified in this Section.

1.05 QUALITY ASSURANCE:

A. Source Limitations: Obtain plumbing fixtures, faucets, and other components of each category through one source from a single manufacturer.

1. Exception: If fixtures, faucets, or other components are not available from a single manufacturer, obtain similar products from other manufacturers specified for that category.

B. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for intended use.

C. Regulatory Requirements: Comply with requirements in ICC A117.1 for plumbing fixtures for people with disabilities.

D. Regulatory Requirements: Comply with requirements in Public Law 102-486, about water flow and consumption rates for plumbing fixtures.

E. NSF Standard: Comply with NSF 61 for fixture materials that will be in contact with potable water.

F. Select combinations of fixtures and trim, faucets, fittings, and other components that are compatible.

G. Comply with the following applicable standards and other requirements specified for plumbing fixtures:

1. Enameled, Cast-Iron Fixtures: ASME A112.19.1M.

2. Porcelain-Enameled, Formed-Steel Fixtures: ASME A112.19.4M.

3. Stainless-Steel Commercial, Handwash Sinks: NSF 2 construction.

4. Vitreous-China Fixtures: ASME A112.19.2M.

H. Comply with the following applicable standards and other requirements specified for lavatory and sink faucets:

1. Backflow Protection Devices for Faucets with Hose-Thread Outlet: ASME A112.18.3M.

2. Diverter Valves for Faucets with Hose Spray: ASSE 1025.

3. Faucets: ASME A112.18.1.

4. Hose-Connection Vacuum Breakers: ASSE 1011.

5. Hose-Coupling Threads: ASME B1.20.7.

6. Integral, Atmospheric Vacuum Breakers: ASSE 1001.

7. NSF Potable-Water Materials: NSF 61.

8. Pipe Threads: ASME B1.20.1.

9. Sensor-Actuated Faucets and Electrical Devices: UL 1951.

10. Supply Fittings: ASME A112.18.1.

11. Brass Waste Fittings: ASME A112.18.2.

I. Comply with the following applicable standards and other requirements specified for shower faucets:

1. Combination, Pressure-Equalizing and Thermostatic-Control Antiscald Faucets:

ASSE 1016.

2. Faucets: ASME A112.18.1.

3. High-Temperature-Limit Controls for Thermal-Shock-Preventing Devices: ASTM F445.

4. Hose-Coupling Threads: ASME B1.20.7.

5. Manual-Control Antiscald Faucets: ASTM F444.

6. Pipe Threads: ASME B1.20.1.

7. Pressure-Equalizing-Control Antiscald Faucets: ASTM F444 and ASSE 1016.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-4 06/09/09

8. Thermostatic-Control Antiscald Faucets: ASTM F444 and ASSE 1016.

J. Comply with the following applicable standards and other requirements specified for miscellaneous fittings:

1. Atmospheric Vacuum Breakers: ASSE 1001.

2. Brass and Copper Supplies: ASME A112.18.1.

3. Manual-Operation Flushometers: ASSE 1037.

4. Brass Waste Fittings: ASME A112.18.2.

5. Sensor-Operation Flushometers: ASSE 1037 and UL 1951.

K. Comply with the following applicable standards and other requirements specified for miscellaneous components:

1. Flexible Water Connectors: ASME A112.18.6.

2. Floor Drains: ASME A112.6.3.

3. Hose-Coupling Threads: ASME B1.20.7.

4. Off-Floor Fixture Supports: ASME A112.6.1M.

5. Pipe Threads: ASME B1.20.1.

6. Plastic Toilet Seats: ANSI Z124.5.

7. Supply and Drain Protective Shielding Guards: ICC A117.1.

1.06 WARRANTY:

A. Special Warranties: Manufacturer's standard form in which manufacturer agrees to repair or replace components of whirlpools that fail in materials or workmanship within specified warranty period.

1. Failures include, but are not limited to, the following:

a. Structural failures of unit shell.

b. Faulty operation of controls, blowers, pumps, heaters, and timers.

c. Deterioration of metals, metal finishes, and other materials beyond normal use.

2. Warranty Period for Commercial Applications: One year(s) from date of Substantial Completion.

1.07 EXTRA MATERIALS:

A. Furnish extra materials described below that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.

1. Faucet Washers and O-Rings: Equal to 10% of amount of each type and size installed.

2. Faucet Cartridges and O-Rings: Equal to 5% of amount of each type and size installed.

3. Flushometer Valve, Repair Kits: Equal to 10% of amount of each type installed, but no fewer than 12 of each type.

4. Provide hinged-top wood or metal box, or individual metal boxes, with separate compartments for each type and size of extra materials listed above.

PART 2 - PRODUCTS

2.01 LAVATORY FAUCETS:

A. Lavatory Faucets (LF-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Bradley Corporation.

c. Chicago Faucets.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-5 BUCKLEY AFB

d. Delta Faucet Company.

e. Eljer.

f. Elkay Manufacturing Co.

g. Fisher Manufacturing Co.

h. Grohe America, Inc.

i. Just Manufacturing Company.

j. Kohler Co.

k. Moen, Inc.

l. Royal Brass Mfg. Co.

m. Sayco; a Briggs Plumbing Products, Inc. Company.

n. Speakman Company.

o. T & S Brass and Bronze Works, Inc.

p. Zurn Plumbing Products Group; Commercial Brass Operation.

2. Description: Single-control mixing valve. Include hot- and cold-water indicators;

coordinate faucet inlets with supplies and fixture holes; coordinate outlet with spout and fixture receptor.

a. Body Material: Commercial, solid brass.

b. Finish: Polished chrome plate.

c. Maximum Flow Rate: 0.5 gpm (1.5 L/min.).

d. Centers: Single hole.

e. Mounting: Deck, concealed.

f. Valve Handle(s): Not applicable.

g. Inlet(s): NPS 3/8 (DN 10) tubing, with NPS 1/2 (DN 15) male adaptor.

h. Spout: Rigid type.

i. Spout Outlet: Spray, 0.5 gpm (1.5 L/min.).

j. Operation: Sensor.

k. Drain: Grid.

l. Tempering Device: Thermostatic.

2.02 SHOWER FAUCETS:

A. Shower Faucets, (SHF-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Chicago Faucets.

c. Delta Faucet Company.

d. Eljer.

e. Gerber Plumbing Fixtures LLC.

f. Kohler Co.

g. Leonard Valve Company.

h. Moen, Inc.

i. Price Pfister, Inc.

j. Royal Brass Mfg. Co.

k. Speakman Company.

l. Sterling Plumbing Group, Inc.

m. Symmons Industries, Inc.

n. Zurn Plumbing Products Group; AquaSpec Commercial Faucet Operation.

o. Zurn Plumbing Products Group; Wilkins Operation.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-6 06/09/09

2. Description: Single-handle thermostatic valve. Include hot- and cold-water indicators;

check stops; and shower head, arm, and flange. Coordinate faucet inlets with supplies and outlet with diverter valve.

a. Body Material: Solid brass.

b. Finish: Polished chrome plate.

c. Maximum Flow Rate: 2.5 gpm (9.5 L/min.), unless otherwise indicated.

d. Diverter Valve: Not required.

e. Mounting: Concealed.

f. Operation: Compression, manual.

g. Antiscald Device: Integral with mixing valve.

h. Check Stops: Check-valve type, integral with or attached to body; on hot- and cold-water supply connections.

i. Supply Connections: NPS 1/2 (DN 15).

j. Shower Head Type: Ball joint and head integral with mounting flange.

k. Shower Head Material: Combined, metallic and nonmetallic with chrome-plated finish.

l. Spray Pattern: Fixed.

m. Integral Volume Control: Required.

n. Shower-Arm Flow-Control Fitting: 1.75 gpm (6.6 L/min.).

2.03 SINK FAUCETS:

A. Sink Faucets, (SKF-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Bradley Corporation.

c. Chicago Faucets.

d. Delta Faucet Company.

e. Eljer.

f. Elkay Manufacturing Co.

g. Fisher Manufacturing Co.

h. Just Manufacturing Company.

i. Kohler Co.

j. Moen, Inc.

k. Royal Brass Mfg. Co.

l. Speakman Company.

m. T & S Brass and Bronze Works, Inc.

n. Zurn Plumbing Products Group; Commercial Brass Operation.

2. Description: Kitchen faucet without spray. Include hot- and cold-water indicators;

coordinate faucet inlets with supplies and fixture holes; coordinate outlet with spout and fixture receptor.

a. Body Material: General-duty, solid brass.

b. Finish: Polished chrome plate.

c. Maximum Flow Rate: 2.5 gpm (9.5 L/min.), unless otherwise indicated.

d. Mixing Valve: Single control.

e. Centers: Single hole.

f. Mounting: Deck, concealed.

g. Handle(s): Lever.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-7 BUCKLEY AFB

h. Inlet(s): NPS 3/8 (DN 10) tubing with NPS 1/2 (DN 15) male adapter.

i. Spout Type: Swivel gooseneck.

j. Spout Outlet: Spray.

k. Vacuum Breaker: Not required.

l. Operation: Compression, manual.

m. Drain: Not required.

B. Sink Faucets, (MBF-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Bradley Corporation.

c. Chicago Faucets.

d. Delta Faucet Company.

e. Eljer.

f. Elkay Manufacturing Co.

g. Fisher Manufacturing Co.

h. Just Manufacturing Company.

i. Kohler Co.

j. Moen, Inc.

k. Royal Brass Mfg. Co.

l. Speakman Company.

m. T & S Brass and Bronze Works, Inc.

n. Zurn Plumbing Products Group; Commercial Brass Operation.

2. Description: Service sink faucet with stops in shanks, vacuum breaker, hose-thread outlet, and pail hook. Include hot- and cold-water indicators; coordinate faucet inlets with supplies and fixture holes; coordinate outlet with spout and fixture receptor.

a. Body Material: Commercial-duty, solid brass.

b. Finish: Rough chrome.

c. Maximum Flow Rate: 2.5 gpm (9.5 L/min.), unless otherwise indicated.

d. Mixing Valve: Two-lever handle.

e. Backflow Protection Device for Hose Outlet: Required.

f. Centers: 4 inches (102 mm).

g. Mounting: Back/wall, concealed.

h. Handle(s): Lever.

i. Inlet(s): NPS 3/8 (DN 10) tubing with NPS 1/2 (DN 15) male adapter.

j. Spout Type: Swivel gooseneck.

k. Spout Outlet: Hose thread.

l. Vacuum Breaker: Required.

m. Operation: Compression, manual.

n. Drain: Grid.

2.04 FLUSHOMETERS:

A. Flushometers, (WCF-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. Delta Faucet Company.

b. Hydrotek International, Inc.

c. Sloan Valve Company.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-8 06/09/09

d. TOTO USA, Inc.

e. Zurn Plumbing Products Group; Commercial Brass Operation.

2. Description: Flushometer for water-closet-type fixture. Include brass body with corrosion-resistant internal components, non-hold-open feature, control stop with check valve, vacuum breaker, copper or brass tubing, and polished chrome-plated finish on exposed parts.

a. Internal Design: Diaphragm or piston operation.

b. Style: Exposed.

c. Inlet Size: NPS 3/4 (DN 20).

d. Trip Mechanism: Hard-wired, electric-sensor actuator.

e. Consumption: 1.6 gal./flush (6.0 L/flush).

f. Tailpiece Size: NPS 1-1/2 (DN 40) and standard length to top of bowl.

B. Flushometers, (UF-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. Coyne & Delany Co.

b. Delta Faucet Company.

c. Hydrotek International, Inc.

d. Sloan Valve Company.

e. TOTO USA, Inc.

f. Zurn Plumbing Products Group; Commercial Brass Operation.

2. Description: Flushometer for urinal-type fixture. Include brass body with corrosion-resistant internal components, non-hold-open feature, control stop with check valve, vacuum breaker, copper or brass tubing, and polished chrome-plated finish on exposed parts.

a. Internal Design: Diaphragm or piston operation.

b. Style: Exposed.

c. Inlet Size: NPS 3/4 (DN 20).

d. Trip Mechanism: Hard-wired, electric-sensor actuator.

e. Consumption: 0.5 gal./flush (1.9 L/flush).

f. Tailpiece Size: NPS 3/4 (DN 20) and standard length to top of bowl.

2.05 TOILET SEATS:

A. Toilet Seats, (TS-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Bemis Manufacturing Company.

c. Centoco Manufacturing Corp.

d. Church Seats.

e. Eljer.

f. Kohler Co.

g. Olsonite Corp.

h. Sanderson Plumbing Products, Inc.; Beneke Div.

i. Sperzel.

2. Description: Toilet seat for water-closet-type fixture.

a. Material: Molded, solid plastic with antimicrobial agent.

b. Configuration: Open front without cover.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-9 BUCKLEY AFB

c. Size: Elongated.

d. Hinge Type: SC, self-sustaining, check.

e. Class: Standard commercial.

f. Color: White.

2.06 PROTECTIVE SHIELDING GUARDS:

A. Protective Shielding Piping Enclosures:

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. TRUEBRO, Inc.

2. Description: Manufactured plastic enclosure for covering plumbing fixture hot- and cold-water supplies and trap and drain piping. Comply with ADA requirements.

2.07 FIXTURE SUPPORTS:

A. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

1. Josam Company.

2. MIFAB Manufacturing Inc.

3. Smith, Jay R. Mfg. Co.

4. Tyler Pipe; Wade Div.

5. Watts Drainage Products Inc.; a div. of Watts Industries, Inc.

6. Zurn Plumbing Products Group; Specification Drainage Operation.

B. Water-Closet Supports:

1. Description: Combination carrier designed for accessible or standard mounting height of wall-mounting, water-closet-type fixture. Include single or double, vertical or horizontal, hub-and-spigot or hubless waste fitting as required for piping arrangement; faceplates;

couplings with gaskets; feet; and fixture bolts and hardware matching fixture. Include additional extension coupling, faceplate, and feet for installation in wide pipe space.

C. Urinal Supports:

1. Description: Type I, urinal carrier with fixture support plates and coupling with seal and fixture bolts and hardware matching fixture for wall-mounting, urinal-type fixture.

Include steel uprights with feet.

2. Accessible-Fixture Support: Include rectangular steel uprights.

D. Lavatory Supports:

1. Description: Type III, lavatory carrier with hanger plate and tie rod for wall-mounting, lavatory-type fixture. Include steel uprights with feet.

2. Accessible-Fixture Support: Include rectangular steel uprights.

2.08 WATER CLOSETS:

A. Water Closets, (WC-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Briggs Plumbing Products, Inc.

c. Capizzi.

d. Crane Plumbing, L.L.C./Fiat Products.

e. Eljer.

f. Kohler Co.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-10 06/09/09

g. Mansfield Plumbing Products, Inc.

h. Peerless Pottery, Inc.

i. Sanitarios Azteca, S.A. de C.V.

j. St. Thomas Creations.

k. TOTO USA, Inc.

2. Description: Floor-mounting, floor-outlet, vitreous-china fixture designed for flushometer valve operation.

a. Style: Flushometer valve.

(1) Bowl Type: Elongated with siphon-jet design. Include bolt caps matching fixture.

(2) Height: Standard.

(3) Design Consumption: 1.6 gal./flush (6 L/flush).

(4) Color: White.

b. Flushometer: WCF-1

c. Toilet Seat: TS-1

B. Water Closets, (WC-2):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Briggs Plumbing Products, Inc.

c. Capizzi.

d. Crane Plumbing, L.L.C./Fiat Products.

e. Eljer.

f. Kohler Co.

g. Mansfield Plumbing Products, Inc.

h. Peerless Pottery, Inc.

i. Sanitarios Azteca, S.A. de C.V.

j. St. Thomas Creations.

k. TOTO USA, Inc.

2. Description: Accessible, floor-mounting, floor-outlet, vitreous-china fixture designed for flushometer valve operation.

a. Style: Flushometer valve.

(1) Bowl Type: Elongated with siphon-jet design. Include bolt caps matching fixture.

(2) Height: Accessible.

(3) Design Consumption: 1.6 gal./flush (6 L/flush).

(4) Color: White.

b. Flushometer: WCF-1

c. Toilet Seat: TS-1

2.09 URINALS:

A. Urinals, (U-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Briggs Plumbing Products, Inc.

c. Capizzi.

d. Crane Plumbing, L.L.C./Fiat Products.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-11 BUCKLEY AFB

e. Duravit USA, Inc.

f. Eljer.

g. Kohler Co.

h. Mansfield Plumbing Products, Inc.

i. Peerless Pottery, Inc.

j. Sanitarios Azteca, S.A. de C.V.

k. St. Thomas Creations.

l. TOTO USA, Inc.

2. Description: Wall-mounting, back-outlet, vitreous-china fixture designed for flushometer valve operation.

a. Type: Siphon jet with extended shields.

b. Strainer or Trapway: Integral cast strainer with integral trap.

c. Design Consumption: 0.5 gal./flush (1.9 L/flush).

d. Color: White.

e. Supply Spud Size: NPS 3/4 (DN 20).

f. Outlet Size: NPS 2 (DN 50).

g. Flushometer: UF-1

h. Fixture Support: Urinal chair carrier.

B. Urinals, (U-2):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Briggs Plumbing Products, Inc.

c. Capizzi.

d. Crane Plumbing, L.L.C./Fiat Products.

e. Duravit USA, Inc.

f. Eljer.

g. Kohler Co.

h. Mansfield Plumbing Products, Inc.

i. Peerless Pottery, Inc.

j. Sanitarios Azteca, S.A. de C.V.

k. St. Thomas Creations.

l. TOTO USA, Inc.

2. Description: Accessible, wall-mounting, back-outlet, vitreous-china fixture designed for flushometer valve operation.

a. Type: Siphon jet with extended shields.

b. Strainer or Trapway: Integral cast strainer with integral trap.

c. Design Consumption: 0.5 gal./flush (1.9 L/flush).

d. Color: White.

e. Supply Spud Size: NPS 3/4 (DN 20).

f. Outlet Size: NPS 2 (DN 50).

g. Flushometer: UF-1

h. Fixture Support: Urinal chair carrier.

2.10 LAVATORIES:

A. Lavatories, (L-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-12 06/09/09

a. American Standard Companies, Inc.

b. Briggs Plumbing Products, Inc.

c. Crane Plumbing, L.L.C./Fiat Products.

d. Eljer.

e. Kohler Co.

f. Peerless Pottery, Inc.

g. Sterling Plumbing Group, Inc.

h. TOTO USA, Inc.

2. Description: Counter-mounting, vitreous-china fixture.

a. Type: Self-rimming.

b. Oval Lavatory Size: 19 by 16 inches (483 by 406 mm).

c. Faucet Hole Punching: One hole.

d. Faucet Hole Location: Top.

e. Color: White.

f. Supplies: NPS 3/8 (DN 10) chrome-plated copper with stops.

g. Faucet: LF-1.

h. Drain: See faucet.

(1) Location: Near back of bowl.

i. Drain Piping: NPS 1-1/4 (DN 32) chrome-plated, cast-brass P-trap; NPS 1-1/4

(DN 32), 0.032-inch- (0.8-mm-) thick tubular brass waste to wall; and wall escutcheon.

j. Protective Shielding Guard(s): Required B. Lavatories, (L-2):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Briggs Plumbing Products, Inc.

c. Crane Plumbing, L.L.C./Fiat Products.

d. Eljer.

e. Kohler Co.

f. Mansfield Plumbing Products, Inc.

g. Peerless Pottery, Inc.

h. St. Thomas Creations.

2. Description: Accessible, wall-mounting, vitreous-china fixture designed for people in wheelchairs.

a. Type: Ledge back.

b. Size: 20 by 26 inches (508 by 660 mm) minimum; rectangular.

c. Faucet Hole Punching: One hole.

d. Color: White.

e. Faucet: LF-1.

f. Supplies: NPS 3/8 (DN 10) chrome-plated copper with stops.

g. Drain: See faucet.

h. Drain Piping: NPS 1-1/4 (DN 32) chrome-plated, cast-brass P-trap and wall escutcheon.

i. Fixture Support: Lavatory.

2.11 KITCHEN SINKS:

A. Kitchen Sinks, (SK-1):

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-13 BUCKLEY AFB

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. Dayton Products, Inc.

b. Elkay Manufacturing Co.

c. Franke Consumer Products, Inc., Kitchen Systems Div.

d. Just Manufacturing Company.

e. Kohler Co.

f. Moen, Inc.

g. Revere Sink.

h. Sterling Plumbing Group, Inc.

i. Teka USA.

j. WhiteRock Corp.

2. Description: One-bowl, residential, counter-mounting, stainless-steel kitchen sink.

a. Overall Dimensions: 22 inches by 22 inches (559 mm by 559 mm).

b. Metal Thickness: 0.047 inch (1.2 mm).

c. Bowl:

(1) Dimensions: 19 inches by 16 inches by 10 1/8 inches (483mm by 406mm by 257mm).

(2) Drain: 3-1/2-inch (89-mm) grid.

(a) Location: Centered in bowl.

d. Sink Faucet: SKF-1

e. Supplies: NPS 1/2 (DN 15) chrome-plated copper with stops.

f. Drain Piping: NPS 1-1/2 (DN 40) chrome-plated, cast-brass P-trap; 0.045-inch-

(1.1-mm-) thick tubular brass waste to wall; and wall escutcheon(s).

g. Disposer: Not required.

h. Dishwasher Air-Gap Fitting: Not required.

i. Hot-Water Dispenser: Not required.

2.12 SERVICE SINKS:

A. Service Sinks, (MB-1):

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Standard Companies, Inc.

b. Commercial Enameling Company.

c. Eljer.

d. Kohler Co.

2. Description: Floor-mounting, enameled, cast-iron fixture with front apron, raised back, and coated, wire rim guard.

a. Size: 28 by 28 inches (710 by 710 mm).

b. Color: White.

c. Faucet: MBF-1.

d. Drain: Grid with NPS 2 (DN 50) outlet.

PART 3 - EXECUTION

3.01 EXAMINATION:

A. Examine roughing-in of water supply and sanitary drainage and vent piping systems to verify actual locations of piping connections before plumbing fixture installation.

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

BUCKLEY AFB 15410-14 06/09/09

B. Examine cabinets, counters, floors, and walls for suitable conditions where fixtures will be installed.

C. Proceed with installation only after unsatisfactory conditions have been corrected.

3.02 INSTALLATION:

A. Assemble plumbing fixtures, trim, fittings, and other components according to manufacturers' written instructions.

B. Install off-floor supports, affixed to building substrate, for wall-mounting fixtures.

1. Use carrier supports with waste fitting and seal for back-outlet fixtures.

2. Use carrier supports without waste fitting for fixtures with tubular waste piping.

3. Use chair-type carrier supports with rectangular steel uprights for accessible fixtures.

C. Install back-outlet, wall-mounting fixtures onto waste fitting seals and attach to supports.

D. Install floor-mounting fixtures on closet flanges or other attachments to piping or building substrate.

E. Install wall-mounting fixtures with tubular waste piping attached to supports. Install counter-mounting fixtures in and attached to casework.

F. Install fixtures level and plumb according to roughing-in drawings.

G. Install water-supply piping with stop on each supply to each fixture to be connected to water distribution piping. Attach supplies to supports or substrate within pipe spaces behind fixtures.

Install stops in locations where they can be easily reached for operation.

1. Exception: Use ball, gate, or globe valves if supply stops are not specified with fixture.

Valves are specified in SECTION 15110 - VALVES.

H. Install trap and tubular waste piping on drain outlet of each fixture to be directly connected to sanitary drainage system.

I. Install flushometer valves for accessible water closets and urinals with handle mounted on wide side of compartment. Install other actuators in locations that are easy for people with disabilities to reach.

J. Install toilet seats on water closets.

K. Install faucet-spout fittings with specified flow rates and patterns in faucet spouts if faucets are not available with required rates and patterns. Include adapters if required.

L. Install water-supply flow-control fittings with specified flow rates in fixture supplies at stop valves.

M. Install faucet flow-control fittings with specified flow rates and patterns in faucet spouts if faucets are not available with required rates and patterns. Include adapters if required.

N. Install shower flow-control fittings with specified maximum flow rates in shower arms.

O. Install traps on fixture outlets.

1. Exception: Omit trap on fixtures with integral traps.

2. Exception: Omit trap on indirect wastes, unless otherwise indicated.

P. Install escutcheons at piping wall ceiling penetrations in exposed, finished locations and within cabinets and millwork. Use deep-pattern escutcheons if required to conceal protruding fittings.

Escutcheons are specified in SECTION 15050 - BASIC MECHANICAL MATERIALS AND

METHODS.

Q. Seal joints between fixtures and walls, floors, and countertops using sanitary-type, one-part, mildew-resistant silicone sealant. Match sealant color to fixture color. Sealants are specified in DIVISION 7.

3.03 CONNECTIONS:

SECTION 15410 REPAIR WING HEADQUARTERS, BLDG 706

06/09/09 15410-15 BUCKLEY AFB

A. Piping installation requirements are specified in other DIVISION 15 Sections. Drawings indicate general arrangement of piping, fittings, and specialties.

B. Connect fixtures with water supplies, stops, and risers, and with traps, soil, waste, and vent piping. Use size fittings required to match fixtures.

C. Ground equipment in accordance with DIVISION 16.

D. Connect wiring in accordance with DIVISION 16.

3.04 FIELD QUALITY CONTROL:

A. Verify that installed plumbing fixtures are categories and types specified for locations where installed.

B. Check that plumbing fixtures are complete with trim, faucets, fittings, and other specified components.

C. Inspect installed plumbing fixtures for damage. Replace damaged fixtures and components.

D. Test installed fixtures after water systems are pressurized for proper operation. Replace malfunctioning fixtures and components, then retest. Repeat procedure until units operate properly.

E. Install fresh batteries in sensor-operated mechanisms.

3.05 ADJUSTING:

A. Operate and adjust faucets and controls. Replace damaged and malfunctioning fixtures, fittings, and controls.

B. Operate and adjust controls. Replace damaged and malfunctioning controls.

C. Adjust water pressure at faucets and flushometer valves to produce proper flow and stream.

D. Replace washers and seals of leaking and dripping faucets and stops.

E. Install fresh batteries in sensor-operated mechanisms.

3.06 CLEANING:

A. Clean fixtures, faucets, and other fittings with manufacturers' recommended cleaning methods and materials. Do the following:

1. Remove faucet spouts and strainers, remove sediment and debris, and reinstall strainers and spouts.

2. Remove sediment and debris from drains.

B. After completing installation of exposed, factory-finished fixtures, faucets, and fittings, inspect exposed finishes and repair damaged finishes.

3.07 PROTECTION:

A. Provide protective covering for installed fixtures and fittings.

B. Do not allow use of plumbing fixtures for temporary facilities unless approved in writing by

Owner.

END OF SECTION 15410